From: Kartik Rajput <kkartik@nvidia.com>
To: <akhilrajeev@nvidia.com>, <andi.shyti@kernel.org>,
<robh@kernel.org>, <krzk+dt@kernel.org>, <conor+dt@kernel.org>,
<thierry.reding@gmail.com>, <jonathanh@nvidia.com>,
<ldewangan@nvidia.com>, <digetx@gmail.com>,
<linux-i2c@vger.kernel.org>, <devicetree@vger.kernel.org>,
<linux-tegra@vger.kernel.org>, <linux-kernel@vger.kernel.org>
Subject: [PATCH 4/5] i2c: tegra: Add support for SW Mutex register
Date: Wed, 8 Jan 2025 16:36:19 +0530 [thread overview]
Message-ID: <20250108110620.86900-5-kkartik@nvidia.com> (raw)
In-Reply-To: <20250108110620.86900-1-kkartik@nvidia.com>
From: Akhil R <akhilrajeev@nvidia.com>
Add support for SW Mutex register introduced in Tegra264 to provide
an option to share the interface between multiple firmware and/or
Virtual Machines.
However, the hardware does not ensure any protection based on the
values. The driver/firmware should honor the peer who already holds
the mutex.
Signed-off-by: Akhil R <akhilrajeev@nvidia.com>
Signed-off-by: Kartik Rajput <kkartik@nvidia.com>
---
drivers/i2c/busses/i2c-tegra.c | 126 +++++++++++++++++++++++++++++----
1 file changed, 111 insertions(+), 15 deletions(-)
diff --git a/drivers/i2c/busses/i2c-tegra.c b/drivers/i2c/busses/i2c-tegra.c
index cf05937cb826..a5974af5b1af 100644
--- a/drivers/i2c/busses/i2c-tegra.c
+++ b/drivers/i2c/busses/i2c-tegra.c
@@ -135,6 +135,11 @@
#define I2C_MST_FIFO_STATUS_TX GENMASK(23, 16)
#define I2C_MST_FIFO_STATUS_RX GENMASK(7, 0)
+#define I2C_SW_MUTEX 0x0ec
+#define I2C_SW_MUTEX_REQUEST GENMASK(3, 0)
+#define I2C_SW_MUTEX_GRANT GENMASK(7, 4)
+#define I2C_SW_MUTEX_ID 9
+
/* configuration load timeout in microseconds */
#define I2C_CONFIG_LOAD_TIMEOUT 1000000
@@ -202,6 +207,7 @@ enum msg_end_type {
* in HS mode.
* @has_interface_timing_reg: Has interface timing register to program the tuned
* timing settings.
+ * @has_mutex: Has Mutex register for mutual exclusion with other firmwares or VM.
*/
struct tegra_i2c_hw_feature {
bool has_continue_xfer_support;
@@ -228,6 +234,7 @@ struct tegra_i2c_hw_feature {
u32 setup_hold_time_hs_mode;
bool has_interface_timing_reg;
bool has_hs_mode_support;
+ bool has_mutex;
};
/**
@@ -371,6 +378,99 @@ static void i2c_readsl(struct tegra_i2c_dev *i2c_dev, void *data,
readsl(i2c_dev->base + tegra_i2c_reg_addr(i2c_dev, reg), data, len);
}
+static int tegra_i2c_poll_register(struct tegra_i2c_dev *i2c_dev,
+ u32 reg, u32 mask, u32 delay_us,
+ u32 timeout_us)
+{
+ void __iomem *addr = i2c_dev->base + tegra_i2c_reg_addr(i2c_dev, reg);
+ u32 val;
+
+ if (!i2c_dev->atomic_mode)
+ return readl_relaxed_poll_timeout(addr, val, !(val & mask),
+ delay_us, timeout_us);
+
+ return readl_relaxed_poll_timeout_atomic(addr, val, !(val & mask),
+ delay_us, timeout_us);
+}
+
+static int tegra_i2c_mutex_trylock(struct tegra_i2c_dev *i2c_dev)
+{
+ u32 val, id;
+
+ val = i2c_readl(i2c_dev, I2C_SW_MUTEX);
+ id = FIELD_GET(I2C_SW_MUTEX_GRANT, val);
+ if (id != 0)
+ return 0;
+
+ val = FIELD_PREP(I2C_SW_MUTEX_REQUEST, I2C_SW_MUTEX_ID);
+ i2c_writel(i2c_dev, val, I2C_SW_MUTEX);
+
+ val = i2c_readl(i2c_dev, I2C_SW_MUTEX);
+ id = FIELD_GET(I2C_SW_MUTEX_GRANT, val);
+
+ if (id != I2C_SW_MUTEX_ID)
+ return 0;
+
+ return 1;
+}
+
+static void tegra_i2c_mutex_lock(struct tegra_i2c_dev *i2c_dev)
+{
+ /* Poll until mutex is acquired. */
+ while (tegra_i2c_mutex_trylock(i2c_dev))
+ cpu_relax();
+}
+
+static void tegra_i2c_mutex_unlock(struct tegra_i2c_dev *i2c_dev)
+{
+ u32 val, id;
+
+ val = i2c_readl(i2c_dev, I2C_SW_MUTEX);
+ id = FIELD_GET(I2C_SW_MUTEX_GRANT, val);
+
+ if (WARN_ON(id != I2C_SW_MUTEX_ID))
+ return;
+
+ i2c_writel(i2c_dev, 0, I2C_SW_MUTEX);
+}
+
+static void tegra_i2c_bus_lock(struct i2c_adapter *adapter,
+ unsigned int flags)
+{
+ struct tegra_i2c_dev *i2c_dev = i2c_get_adapdata(adapter);
+
+ rt_mutex_lock_nested(&adapter->bus_lock, i2c_adapter_depth(adapter));
+ tegra_i2c_mutex_lock(i2c_dev);
+}
+
+static int tegra_i2c_bus_trylock(struct i2c_adapter *adapter,
+ unsigned int flags)
+{
+ struct tegra_i2c_dev *i2c_dev = i2c_get_adapdata(adapter);
+ int ret;
+
+ ret = rt_mutex_trylock(&adapter->bus_lock);
+ if (ret)
+ ret = tegra_i2c_mutex_trylock(i2c_dev);
+
+ return ret;
+}
+
+static void tegra_i2c_bus_unlock(struct i2c_adapter *adapter,
+ unsigned int flags)
+{
+ struct tegra_i2c_dev *i2c_dev = i2c_get_adapdata(adapter);
+
+ rt_mutex_unlock(&adapter->bus_lock);
+ tegra_i2c_mutex_unlock(i2c_dev);
+}
+
+static const struct i2c_lock_operations tegra_i2c_lock_ops = {
+ .lock_bus = tegra_i2c_bus_lock,
+ .trylock_bus = tegra_i2c_bus_trylock,
+ .unlock_bus = tegra_i2c_bus_unlock,
+};
+
static void tegra_i2c_mask_irq(struct tegra_i2c_dev *i2c_dev, u32 mask)
{
u32 int_mask;
@@ -546,21 +646,6 @@ static void tegra_i2c_vi_init(struct tegra_i2c_dev *i2c_dev)
i2c_writel(i2c_dev, 0x0, I2C_TLOW_SEXT);
}
-static int tegra_i2c_poll_register(struct tegra_i2c_dev *i2c_dev,
- u32 reg, u32 mask, u32 delay_us,
- u32 timeout_us)
-{
- void __iomem *addr = i2c_dev->base + tegra_i2c_reg_addr(i2c_dev, reg);
- u32 val;
-
- if (!i2c_dev->atomic_mode)
- return readl_relaxed_poll_timeout(addr, val, !(val & mask),
- delay_us, timeout_us);
-
- return readl_relaxed_poll_timeout_atomic(addr, val, !(val & mask),
- delay_us, timeout_us);
-}
-
static int tegra_i2c_flush_fifos(struct tegra_i2c_dev *i2c_dev)
{
u32 mask, val, offset;
@@ -1497,6 +1582,7 @@ static const struct tegra_i2c_hw_feature tegra20_i2c_hw = {
.setup_hold_time_fast_fast_plus_mode = 0x0,
.setup_hold_time_hs_mode = 0x0,
.has_interface_timing_reg = false,
+ .has_mutex = false,
};
static const struct tegra_i2c_hw_feature tegra30_i2c_hw = {
@@ -1521,6 +1607,7 @@ static const struct tegra_i2c_hw_feature tegra30_i2c_hw = {
.setup_hold_time_fast_fast_plus_mode = 0x0,
.setup_hold_time_hs_mode = 0x0,
.has_interface_timing_reg = false,
+ .has_mutex = false,
};
static const struct tegra_i2c_hw_feature tegra114_i2c_hw = {
@@ -1545,6 +1632,7 @@ static const struct tegra_i2c_hw_feature tegra114_i2c_hw = {
.setup_hold_time_fast_fast_plus_mode = 0x0,
.setup_hold_time_hs_mode = 0x0,
.has_interface_timing_reg = false,
+ .has_mutex = false,
};
static const struct tegra_i2c_hw_feature tegra124_i2c_hw = {
@@ -1569,6 +1657,7 @@ static const struct tegra_i2c_hw_feature tegra124_i2c_hw = {
.setup_hold_time_fast_fast_plus_mode = 0x0,
.setup_hold_time_hs_mode = 0x0,
.has_interface_timing_reg = true,
+ .has_mutex = false,
};
static const struct tegra_i2c_hw_feature tegra210_i2c_hw = {
@@ -1593,6 +1682,7 @@ static const struct tegra_i2c_hw_feature tegra210_i2c_hw = {
.setup_hold_time_fast_fast_plus_mode = 0,
.setup_hold_time_hs_mode = 0,
.has_interface_timing_reg = true,
+ .has_mutex = false,
};
static const struct tegra_i2c_hw_feature tegra186_i2c_hw = {
@@ -1617,6 +1707,7 @@ static const struct tegra_i2c_hw_feature tegra186_i2c_hw = {
.setup_hold_time_fast_fast_plus_mode = 0,
.setup_hold_time_hs_mode = 0,
.has_interface_timing_reg = true,
+ .has_mutex = false,
};
static const struct tegra_i2c_hw_feature tegra194_i2c_hw = {
@@ -1644,6 +1735,7 @@ static const struct tegra_i2c_hw_feature tegra194_i2c_hw = {
.setup_hold_time_hs_mode = 0x090909,
.has_interface_timing_reg = true,
.has_hs_mode_support = true,
+ .has_mutex = false,
};
static const struct tegra_i2c_hw_feature tegra264_i2c_hw = {
@@ -1671,6 +1763,7 @@ static const struct tegra_i2c_hw_feature tegra264_i2c_hw = {
.setup_hold_time_hs_mode = 0x090909,
.has_interface_timing_reg = true,
.has_hs_mode_support = true,
+ .has_mutex = true,
};
static const struct of_device_id tegra_i2c_of_match[] = {
@@ -1875,6 +1968,9 @@ static int tegra_i2c_probe(struct platform_device *pdev)
i2c_dev->adapter.nr = pdev->id;
ACPI_COMPANION_SET(&i2c_dev->adapter.dev, ACPI_COMPANION(&pdev->dev));
+ if (i2c_dev->hw->has_mutex)
+ i2c_dev->adapter.lock_ops = &tegra_i2c_lock_ops;
+
if (i2c_dev->hw->supports_bus_clear)
i2c_dev->adapter.bus_recovery_info = &tegra_i2c_recovery_info;
--
2.43.0
next prev parent reply other threads:[~2025-01-08 11:06 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-01-08 11:06 [PATCH 0/5] Add I2C support for Tegra264 Kartik Rajput
2025-01-08 11:06 ` [PATCH 1/5] i2c: tegra: Add HS mode support Kartik Rajput
2025-01-08 16:45 ` Thierry Reding
2025-01-15 11:40 ` Kartik Rajput
2025-01-09 12:18 ` kernel test robot
2025-01-08 11:06 ` [PATCH 2/5] dt-bindings: i2c: nvidia,tegra20-i2c: Document Tegra264 I2C Kartik Rajput
2025-01-08 16:47 ` Thierry Reding
2025-01-15 11:41 ` Kartik Rajput
2025-01-10 15:55 ` Rob Herring
2025-01-15 11:46 ` Kartik Rajput
2025-01-08 11:06 ` [PATCH 3/5] i2c: tegra: Add Tegra264 support Kartik Rajput
2025-01-09 4:43 ` Mukesh Kumar Savaliya
2025-01-09 10:24 ` Thierry Reding
2025-01-09 12:37 ` Mukesh Kumar Savaliya
2025-01-08 11:06 ` Kartik Rajput [this message]
2025-01-08 17:01 ` [PATCH 4/5] i2c: tegra: Add support for SW Mutex register Thierry Reding
2025-01-15 11:39 ` Kartik Rajput
2025-01-08 11:06 ` [PATCH 5/5] i2c: tegra: Do not configure DMA if not supported Kartik Rajput
2025-01-09 10:33 ` Thierry Reding
2025-01-15 11:42 ` Kartik Rajput
2025-01-09 10:37 ` [PATCH 0/5] Add I2C support for Tegra264 Thierry Reding
2025-01-15 11:44 ` Kartik Rajput
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250108110620.86900-5-kkartik@nvidia.com \
--to=kkartik@nvidia.com \
--cc=akhilrajeev@nvidia.com \
--cc=andi.shyti@kernel.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=digetx@gmail.com \
--cc=jonathanh@nvidia.com \
--cc=krzk+dt@kernel.org \
--cc=ldewangan@nvidia.com \
--cc=linux-i2c@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-tegra@vger.kernel.org \
--cc=robh@kernel.org \
--cc=thierry.reding@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox