[PATCH 03/10] i2c: iproc: Use u32 instead of uint32_t

[Andi Shyti <andi.shyti@kernel.org>]

In the kernel u32 should be used instead of unit32_t.

Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
---
 drivers/i2c/busses/i2c-bcm-iproc.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/i2c/busses/i2c-bcm-iproc.c b/drivers/i2c/busses/i2c-bcm-iproc.c
index 2e24959bc9af..3816ceb713d9 100644
--- a/drivers/i2c/busses/i2c-bcm-iproc.c
+++ b/drivers/i2c/busses/i2c-bcm-iproc.c
@@ -542,7 +542,7 @@ static bool bcm_iproc_i2c_slave_isr(struct bcm_iproc_i2c_dev *iproc_i2c,
 static void bcm_iproc_i2c_read_valid_bytes(struct bcm_iproc_i2c_dev *iproc_i2c)
 {
 	struct i2c_msg *msg = iproc_i2c->msg;
-	uint32_t val;
+	u32 val;
 
 	/* Read valid data from RX FIFO */
 	while (iproc_i2c->rx_bytes < msg->len) {
@@ -977,7 +977,7 @@ static int bcm_iproc_i2c_xfer(struct i2c_adapter *adapter,
 	return num;
 }
 
-static uint32_t bcm_iproc_i2c_functionality(struct i2c_adapter *adap)
+static u32 bcm_iproc_i2c_functionality(struct i2c_adapter *adap)
 {
 	u32 val;
 
-- 
2.49.0