From: Andi Shyti <andi.shyti@kernel.org>
To: linux-i2c <linux-i2c@vger.kernel.org>
Cc: Andi Shyti <andi.shyti@kernel.org>
Subject: [PATCH 08/10] i2c: iproc: Move function and avoid prototypes
Date: Fri, 18 Apr 2025 23:16:33 +0200 [thread overview]
Message-ID: <20250418211635.2666234-9-andi.shyti@kernel.org> (raw)
In-Reply-To: <20250418211635.2666234-1-andi.shyti@kernel.org>
Shuffle a bit the code in order to avoid prototypes.
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
---
drivers/i2c/busses/i2c-bcm-iproc.c | 143 ++++++++++++++---------------
1 file changed, 69 insertions(+), 74 deletions(-)
diff --git a/drivers/i2c/busses/i2c-bcm-iproc.c b/drivers/i2c/busses/i2c-bcm-iproc.c
index d25b393f456b..74903edb4925 100644
--- a/drivers/i2c/busses/i2c-bcm-iproc.c
+++ b/drivers/i2c/busses/i2c-bcm-iproc.c
@@ -224,11 +224,6 @@ static void slave_rx_tasklet_fn(unsigned long);
| BIT(IS_S_TX_UNDERRUN_SHIFT) | BIT(IS_S_RX_FIFO_FULL_SHIFT)\
| BIT(IS_S_RX_THLD_SHIFT))
-static int bcm_iproc_i2c_reg_slave(struct i2c_client *slave);
-static int bcm_iproc_i2c_unreg_slave(struct i2c_client *slave);
-static void bcm_iproc_i2c_enable_disable(struct bcm_iproc_i2c_dev *iproc_i2c,
- bool enable);
-
static inline u32 iproc_i2c_rd_reg(struct bcm_iproc_i2c_dev *iproc_i2c,
u32 offset)
{
@@ -316,6 +311,19 @@ static void bcm_iproc_i2c_slave_init(struct bcm_iproc_i2c_dev *iproc_i2c,
iproc_i2c_wr_reg(iproc_i2c, IE_OFFSET, val);
}
+static void bcm_iproc_i2c_enable_disable(struct bcm_iproc_i2c_dev *iproc_i2c,
+ bool enable)
+{
+ u32 val;
+
+ val = iproc_i2c_rd_reg(iproc_i2c, CFG_OFFSET);
+ if (enable)
+ val |= BIT(CFG_EN_SHIFT);
+ else
+ val &= ~BIT(CFG_EN_SHIFT);
+ iproc_i2c_wr_reg(iproc_i2c, CFG_OFFSET, val);
+}
+
static bool bcm_iproc_i2c_check_slave_status
(struct bcm_iproc_i2c_dev *iproc_i2c, u32 status)
{
@@ -707,19 +715,6 @@ static void bcm_iproc_i2c_init(struct bcm_iproc_i2c_dev *iproc_i2c)
iproc_i2c_wr_reg(iproc_i2c, IS_OFFSET, 0xffffffff);
}
-static void bcm_iproc_i2c_enable_disable(struct bcm_iproc_i2c_dev *iproc_i2c,
- bool enable)
-{
- u32 val;
-
- val = iproc_i2c_rd_reg(iproc_i2c, CFG_OFFSET);
- if (enable)
- val |= BIT(CFG_EN_SHIFT);
- else
- val &= ~BIT(CFG_EN_SHIFT);
- iproc_i2c_wr_reg(iproc_i2c, CFG_OFFSET, val);
-}
-
static int bcm_iproc_i2c_check_status(struct bcm_iproc_i2c_dev *iproc_i2c,
struct i2c_msg *msg)
{
@@ -988,6 +983,62 @@ static u32 bcm_iproc_i2c_functionality(struct i2c_adapter *adap)
return val;
}
+static int bcm_iproc_i2c_reg_slave(struct i2c_client *slave)
+{
+ struct bcm_iproc_i2c_dev *iproc_i2c = i2c_get_adapdata(slave->adapter);
+
+ if (iproc_i2c->slave)
+ return -EBUSY;
+
+ if (slave->flags & I2C_CLIENT_TEN)
+ return -EAFNOSUPPORT;
+
+ iproc_i2c->slave = slave;
+
+ tasklet_init(&iproc_i2c->slave_rx_tasklet, slave_rx_tasklet_fn,
+ (unsigned long)iproc_i2c);
+
+ bcm_iproc_i2c_slave_init(iproc_i2c, false);
+ return 0;
+}
+
+static int bcm_iproc_i2c_unreg_slave(struct i2c_client *slave)
+{
+ u32 tmp;
+ struct bcm_iproc_i2c_dev *iproc_i2c = i2c_get_adapdata(slave->adapter);
+
+ if (!iproc_i2c->slave)
+ return -EINVAL;
+
+ disable_irq(iproc_i2c->irq);
+
+ tasklet_kill(&iproc_i2c->slave_rx_tasklet);
+
+ /* disable all slave interrupts */
+ tmp = iproc_i2c_rd_reg(iproc_i2c, IE_OFFSET);
+ tmp &= ~(IE_S_ALL_INTERRUPT_MASK <<
+ IE_S_ALL_INTERRUPT_SHIFT);
+ iproc_i2c_wr_reg(iproc_i2c, IE_OFFSET, tmp);
+
+ /* Erase the slave address programmed */
+ tmp = iproc_i2c_rd_reg(iproc_i2c, S_CFG_SMBUS_ADDR_OFFSET);
+ tmp &= ~BIT(S_CFG_EN_NIC_SMB_ADDR3_SHIFT);
+ iproc_i2c_wr_reg(iproc_i2c, S_CFG_SMBUS_ADDR_OFFSET, tmp);
+
+ /* flush TX/RX FIFOs */
+ tmp = (BIT(S_FIFO_RX_FLUSH_SHIFT) | BIT(S_FIFO_TX_FLUSH_SHIFT));
+ iproc_i2c_wr_reg(iproc_i2c, S_FIFO_CTRL_OFFSET, tmp);
+
+ /* clear all pending slave interrupts */
+ iproc_i2c_wr_reg(iproc_i2c, IS_OFFSET, ISR_MASK_SLAVE);
+
+ iproc_i2c->slave = NULL;
+
+ enable_irq(iproc_i2c->irq);
+
+ return 0;
+}
+
static struct i2c_algorithm bcm_iproc_algo = {
.master_xfer = bcm_iproc_i2c_xfer,
.functionality = bcm_iproc_i2c_functionality,
@@ -1173,62 +1224,6 @@ static const struct dev_pm_ops bcm_iproc_i2c_pm_ops = {
.resume_early = &bcm_iproc_i2c_resume
};
-static int bcm_iproc_i2c_reg_slave(struct i2c_client *slave)
-{
- struct bcm_iproc_i2c_dev *iproc_i2c = i2c_get_adapdata(slave->adapter);
-
- if (iproc_i2c->slave)
- return -EBUSY;
-
- if (slave->flags & I2C_CLIENT_TEN)
- return -EAFNOSUPPORT;
-
- iproc_i2c->slave = slave;
-
- tasklet_init(&iproc_i2c->slave_rx_tasklet, slave_rx_tasklet_fn,
- (unsigned long)iproc_i2c);
-
- bcm_iproc_i2c_slave_init(iproc_i2c, false);
- return 0;
-}
-
-static int bcm_iproc_i2c_unreg_slave(struct i2c_client *slave)
-{
- u32 tmp;
- struct bcm_iproc_i2c_dev *iproc_i2c = i2c_get_adapdata(slave->adapter);
-
- if (!iproc_i2c->slave)
- return -EINVAL;
-
- disable_irq(iproc_i2c->irq);
-
- tasklet_kill(&iproc_i2c->slave_rx_tasklet);
-
- /* disable all slave interrupts */
- tmp = iproc_i2c_rd_reg(iproc_i2c, IE_OFFSET);
- tmp &= ~(IE_S_ALL_INTERRUPT_MASK <<
- IE_S_ALL_INTERRUPT_SHIFT);
- iproc_i2c_wr_reg(iproc_i2c, IE_OFFSET, tmp);
-
- /* Erase the slave address programmed */
- tmp = iproc_i2c_rd_reg(iproc_i2c, S_CFG_SMBUS_ADDR_OFFSET);
- tmp &= ~BIT(S_CFG_EN_NIC_SMB_ADDR3_SHIFT);
- iproc_i2c_wr_reg(iproc_i2c, S_CFG_SMBUS_ADDR_OFFSET, tmp);
-
- /* flush TX/RX FIFOs */
- tmp = (BIT(S_FIFO_RX_FLUSH_SHIFT) | BIT(S_FIFO_TX_FLUSH_SHIFT));
- iproc_i2c_wr_reg(iproc_i2c, S_FIFO_CTRL_OFFSET, tmp);
-
- /* clear all pending slave interrupts */
- iproc_i2c_wr_reg(iproc_i2c, IS_OFFSET, ISR_MASK_SLAVE);
-
- iproc_i2c->slave = NULL;
-
- enable_irq(iproc_i2c->irq);
-
- return 0;
-}
-
static const struct of_device_id bcm_iproc_i2c_of_match[] = {
{
.compatible = "brcm,iproc-i2c",
--
2.49.0
next prev parent reply other threads:[~2025-04-18 21:24 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-04-18 21:16 [PATCH 00/10] Few improvements on the Broadcom iProc Andi Shyti
2025-04-18 21:16 ` [PATCH 01/10] i2c: iproc: Drop unnecessary initialisation of 'ret' Andi Shyti
2025-04-18 21:16 ` [PATCH 02/10] i2c: iproc: Use dev_err_probe in probe Andi Shyti
2025-04-18 21:16 ` [PATCH 03/10] i2c: iproc: Use u32 instead of uint32_t Andi Shyti
2025-04-18 21:16 ` [PATCH 04/10] i2c: iproc: Fix alignment to match the open parenthesis Andi Shyti
2025-04-18 21:16 ` [PATCH 05/10] i2c: iproc: Remove stray blank line in slave ISR Andi Shyti
2025-04-18 21:16 ` [PATCH 06/10] i2c: iproc: Replace udelay() with usleep_range() Andi Shyti
2025-04-18 21:16 ` [PATCH 07/10] i2c: iproc: Fix indentation of bcm_iproc_i2c_slave_init() Andi Shyti
2025-04-18 21:16 ` Andi Shyti [this message]
2025-04-19 19:46 ` [PATCH 08/10] i2c: iproc: Move function and avoid prototypes Mukesh Kumar Savaliya
2025-04-26 20:19 ` [PATCH v2 " Andi Shyti
2025-04-18 21:16 ` [PATCH 09/10] i2c: iproc: When there's an error treat it as an error Andi Shyti
2025-04-18 21:16 ` [PATCH 10/10] i2c: iproc: Remove unnecessary double negation Andi Shyti
2025-04-28 19:30 ` [PATCH 00/10] Few improvements on the Broadcom iProc Andi Shyti
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250418211635.2666234-9-andi.shyti@kernel.org \
--to=andi.shyti@kernel.org \
--cc=linux-i2c@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox