From: Wenmeng Liu <wenmeng.liu@oss.qualcomm.com>
To: Loic Poulain <loic.poulain@oss.qualcomm.com>,
Robert Foss <rfoss@kernel.org>,
Andi Shyti <andi.shyti@kernel.org>, Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Bjorn Andersson <andersson@kernel.org>,
Konrad Dybcio <konradybcio@kernel.org>,
Robert Foss <rfoss@kernel.org>, Todor Tomov <todor.too@gmail.com>,
Bryan O'Donoghue <bryan.odonoghue@linaro.org>,
Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Cc: linux-i2c@vger.kernel.org, linux-arm-msm@vger.kernel.org,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-media@vger.kernel.org,
Wenmeng Liu <wenmeng.liu@oss.qualcomm.com>
Subject: [PATCH v2 0/4] Add CCI and imx577 sensor support for Talos evk
Date: Tue, 06 Jan 2026 17:39:52 +0800 [thread overview]
Message-ID: <20260106-sm6150_evk-v2-0-bb112cb83d74@oss.qualcomm.com> (raw)
Talos EVK is based on the Qualcomm SM6150 SoC.
It lacks a camera sensor in its default configuration.
This series adds CCI support and enables the IMX577 sensor via CSIPHY1
through device tree overlay.
We have tested IMX577 Sensor on CCI1 with following commands:
- media-ctl -d /dev/media0 --reset
- media-ctl -d /dev/media0 -V '"imx577 1-001a":0[fmt:SRGGB10/4056x3040 field:none]'
- media-ctl -d /dev/media0 -V '"msm_csiphy1":0[fmt:SRGGB10/4056x3040]'
- media-ctl -d /dev/media0 -V '"msm_csid0":0[fmt:SRGGB10/4056x3040]'
- media-ctl -d /dev/media0 -V '"msm_vfe0_rdi0":0[fmt:SRGGB10/4056x3040]'
- media-ctl -d /dev/media0 -l '"msm_csiphy1":1->"msm_csid0":0[1]'
- media-ctl -d /dev/media0 -l '"msm_csid0":1->"msm_vfe0_rdi0":0[1]'
- yavta -B capture-mplane -n 5 -f SRGGB10P -s 4056x3040 -F /dev/video0 --capture=5
This patch series depends on patch series:
https://lore.kernel.org/all/20260106-sm6150-camss-v3-0-d1d5c4d02b0b@oss.qualcomm.com/
https://lore.kernel.org/all/20251230130227.3503590-1-tessolveupstream@gmail.com/
Changes in v2:
- Modify the CCI dts style and commit msg. - Konrad
- Split mclk change as a separate patch. - Vladimir
- Remove clock-lanes. - Vladimir
- Add mclk3(GPIO31). - Vladimir
- Link to v1:
https://lore.kernel.org/all/20251222-sm6150_evk-v1-0-4d260a31c00d@oss.qualcomm.com/
---
Wenmeng Liu (4):
dt-bindings: i2c: qcom-cci: Document sm6150 compatible
arm64: dts: qcom: talos: Add CCI definitions
arm64: dts: qcom: talos: Add camera MCLK pinctrl
arm64: dts: qcom: talos-evk-camera: Add DT overlay
.../devicetree/bindings/i2c/qcom,i2c-cci.yaml | 18 ++++
arch/arm64/boot/dts/qcom/Makefile | 2 +
arch/arm64/boot/dts/qcom/talos-evk-camera.dtso | 63 +++++++++++++
arch/arm64/boot/dts/qcom/talos.dtsi | 100 +++++++++++++++++++++
4 files changed, 183 insertions(+)
---
base-commit: ca0a5887956ccdd8b535b9819fee0bc62f0bba5b
change-id: 20251222-sm6150_evk-8ebed9e9f3bc
Best regards,
--
Wenmeng <wenmeng.liu@oss.qualcomm.com>
next reply other threads:[~2026-01-06 9:40 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-01-06 9:39 Wenmeng Liu [this message]
2026-01-06 9:39 ` [PATCH v2 1/4] dt-bindings: i2c: qcom-cci: Document sm6150 compatible Wenmeng Liu
2026-01-07 4:27 ` Vladimir Zapolskiy
2026-01-07 8:00 ` Krzysztof Kozlowski
2026-01-07 8:17 ` Wenmeng Liu
2026-01-07 8:34 ` Krzysztof Kozlowski
2026-01-07 10:07 ` Wenmeng Liu
2026-01-07 10:35 ` Loic Poulain
2026-01-06 9:39 ` [PATCH v2 2/4] arm64: dts: qcom: talos: Add CCI definitions Wenmeng Liu
2026-01-06 18:27 ` Dmitry Baryshkov
2026-01-07 2:47 ` Wenmeng Liu
2026-01-07 4:28 ` Vladimir Zapolskiy
2026-01-06 9:39 ` [PATCH v2 3/4] arm64: dts: qcom: talos: Add camera MCLK pinctrl Wenmeng Liu
2026-01-06 18:29 ` Dmitry Baryshkov
2026-01-07 4:28 ` Vladimir Zapolskiy
2026-01-07 11:51 ` Konrad Dybcio
2026-01-06 9:39 ` [PATCH v2 4/4] arm64: dts: qcom: talos-evk-camera: Add DT overlay Wenmeng Liu
2026-01-06 18:23 ` Dmitry Baryshkov
2026-01-07 3:05 ` Wenmeng Liu
2026-01-07 5:16 ` Vladimir Zapolskiy
2026-01-07 5:55 ` Wenmeng Liu
2026-01-07 21:24 ` Vladimir Zapolskiy
2026-01-06 19:26 ` Rob Herring
2026-01-07 3:06 ` Wenmeng Liu
2026-01-07 13:28 ` Bryan O'Donoghue
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260106-sm6150_evk-v2-0-bb112cb83d74@oss.qualcomm.com \
--to=wenmeng.liu@oss.qualcomm.com \
--cc=andersson@kernel.org \
--cc=andi.shyti@kernel.org \
--cc=bryan.odonoghue@linaro.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=konradybcio@kernel.org \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-i2c@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=loic.poulain@oss.qualcomm.com \
--cc=rfoss@kernel.org \
--cc=robh@kernel.org \
--cc=todor.too@gmail.com \
--cc=vladimir.zapolskiy@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox