Re: [PATCH v2 4/4] arm64: dts: qcom: talos-evk-camera: Add DT overlay

[Wenmeng Liu <wenmeng.liu@oss.qualcomm.com>]

On 1/7/2026 2:23 AM, Dmitry Baryshkov wrote:
> On Tue, Jan 06, 2026 at 05:39:56PM +0800, Wenmeng Liu wrote:
>> Enable IMX577 via CCI on Taloss EVK Core Kit.
>>
>> The Talos EVK board does not include a camera sensor
>> by default, this overlay reflects the possibility of
>> attaching an optional camera sensor.
>> For this reason, the camera sensor configuration is
>> placed in talos-evk-camera.dtso, rather than
>> modifying the base talos-evk.dts.
>>
>> Signed-off-by: Wenmeng Liu <wenmeng.liu@oss.qualcomm.com>
>> ---
>>   arch/arm64/boot/dts/qcom/Makefile              |  2 +
>>   arch/arm64/boot/dts/qcom/talos-evk-camera.dtso | 63 ++++++++++++++++++++++++++
> 
> Is it possible to attach other sensors? If so, overlay name should
> depicit which sensors are attached (compare this to the RBn boards where
> specifying "vision kit" defines all sensors attached to the device).

Okay, we previously had a discussion on this. I will rename the file to 
talos-evk-camera-imx577.dtso.

Thanks,
Wenmeng

> 
>>   2 files changed, 65 insertions(+)
>>
>