[PATCH] dt-bindings: i2c: convert altera i2c to dt-schema

[PATCH] dt-bindings: i2c: convert altera i2c to dt-schema

[Chaitanya Sabnis]

Convert the Altera SoftIP I2C Controller bindings from legacy text
format to modern dt-schema (YAML).

The hardware constraints and properties remain identical. The example
node was updated to use a standard 32-bit address space to clear
compilation warnings.

Signed-off-by: Chaitanya Sabnis <chaitanya.msabnis@gmail.com>
---
 .../bindings/i2c/altr,softip-i2c-v1.0.yaml    | 62 +++++++++++++++++++
 .../devicetree/bindings/i2c/i2c-altera.txt    | 39 ------------
 2 files changed, 62 insertions(+), 39 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/i2c/altr,softip-i2c-v1.0.yaml
 delete mode 100644 Documentation/devicetree/bindings/i2c/i2c-altera.txt

diff --git a/Documentation/devicetree/bindings/i2c/altr,softip-i2c-v1.0.yaml b/Documentation/devicetree/bindings/i2c/altr,softip-i2c-v1.0.yaml
new file mode 100644
index 000000000000..d04570680c05
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/altr,softip-i2c-v1.0.yaml
@@ -0,0 +1,62 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i2c/altr,softip-i2c-v1.0.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Altera I2C Controller
+
+maintainers:
+  - Thor Thayer <thor.thayer@linux.intel.com>
+  - Chaitanya Sabnis <chaitanya.msabnis@gmail.com>
+
+description:
+  Altera's synthesizable logic block I2C Controller for use in Altera's FPGAs.
+
+allOf:
+  - $ref: /schemas/i2c/i2c-controller.yaml#
+
+properties:
+  compatible:
+    const: altr,softip-i2c-v1.0
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  fifo-size:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: Size of the RX and TX FIFOs in bytes.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    i2c@80000 {
+        compatible = "altr,softip-i2c-v1.0";
+        reg = <0x80000 0x40>;
+        interrupt-parent = <&intc>;
+        interrupts = <0 43 4>;
+        clocks = <&clk_0>;
+        clock-frequency = <100000>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+        fifo-size = <4>;
+
+        eeprom@51 {
+            compatible = "atmel,24c32";
+            reg = <0x51>;
+            pagesize = <32>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/i2c/i2c-altera.txt b/Documentation/devicetree/bindings/i2c/i2c-altera.txt
deleted file mode 100644
index 767664f448ec..000000000000
--- a/Documentation/devicetree/bindings/i2c/i2c-altera.txt
+++ /dev/null
@@ -1,39 +0,0 @@
-* Altera I2C Controller
-* This is Altera's synthesizable logic block I2C Controller for use
-* in Altera's FPGAs.
-
-Required properties :
- - compatible : should be "altr,softip-i2c-v1.0"
- - reg        : Offset and length of the register set for the device
- - interrupts : <IRQ> where IRQ is the interrupt number.
- - clocks     : phandle to input clock.
- - #address-cells = <1>;
- - #size-cells = <0>;
-
-Recommended properties :
- - clock-frequency : desired I2C bus clock frequency in Hz.
-
-Optional properties :
- - fifo-size : Size of the RX and TX FIFOs in bytes.
- - Child nodes conforming to i2c bus binding
-
-Example :
-
-	i2c@100080000 {
-		compatible = "altr,softip-i2c-v1.0";
-		reg = <0x00000001 0x00080000 0x00000040>;
-		interrupt-parent = <&intc>;
-		interrupts = <0 43 4>;
-		clocks = <&clk_0>;
-		clock-frequency = <100000>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		fifo-size = <4>;
-
-		eeprom@51 {
-			compatible = "atmel,24c32";
-			reg = <0x51>;
-			pagesize = <32>;
-		};
-	};
-
-- 
2.43.0