[PATCH i2c-tools] i2cget: add mode character for SMBus block read to manpage

[PATCH i2c-tools] i2cget: add mode character for SMBus block read to manpage

[Wolfram Sang]

The text was updated, but the mode character was forgotten.

Fixes: 789af53 ("i2cget: Add support for SMBus block read")
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
---
 tools/i2cget.8 | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/tools/i2cget.8 b/tools/i2cget.8
index 83c6f7d..a836341 100644
--- a/tools/i2cget.8
+++ b/tools/i2cget.8
@@ -49,7 +49,7 @@ an integer between 0x00 and 0xFF. If omitted, the currently active register
 will be read (if that makes sense for the considered chip).
 .PP
 The \fImode\fR parameter, if specified, is one of the letters \fBb\fP,
-\fBw\fP, \fBc\fP, or \fBi\fP, corresponding to a read byte data, a read
+\fBw\fP, \fBc\fP, \fBs\fP, or \fBi\fP, corresponding to a read byte data, a read
 word data, a write byte/read byte, an SMBus block read, or an I2C block read
 transaction, respectively. A \fBp\fP can also be appended to the \fImode\fR
 parameter to enable PEC, except for I2C block transactions. If the \fImode\fR
-- 
2.35.1

Re: [PATCH i2c-tools] i2cget: add mode character for SMBus block read to manpage

[Jean Delvare]

On Wed, 30 Mar 2022 12:20:28 +0200, Wolfram Sang wrote:
> The text was updated, but the mode character was forgotten.
> 
> Fixes: 789af53 ("i2cget: Add support for SMBus block read")
> Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
> ---
>  tools/i2cget.8 | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/tools/i2cget.8 b/tools/i2cget.8
> index 83c6f7d..a836341 100644
> --- a/tools/i2cget.8
> +++ b/tools/i2cget.8
> @@ -49,7 +49,7 @@ an integer between 0x00 and 0xFF. If omitted, the currently active register
>  will be read (if that makes sense for the considered chip).
>  .PP
>  The \fImode\fR parameter, if specified, is one of the letters \fBb\fP,
> -\fBw\fP, \fBc\fP, or \fBi\fP, corresponding to a read byte data, a read
> +\fBw\fP, \fBc\fP, \fBs\fP, or \fBi\fP, corresponding to a read byte data, a read
>  word data, a write byte/read byte, an SMBus block read, or an I2C block read
>  transaction, respectively. A \fBp\fP can also be appended to the \fImode\fR
>  parameter to enable PEC, except for I2C block transactions. If the \fImode\fR

That's odd, but indeed it was forgotten. Thanks for noticing.

Reviewed-by: Jean Delvare <jdelvare@suse.de>

-- 
Jean Delvare
SUSE L3 Support

Re: [PATCH i2c-tools] i2cget: add mode character for SMBus block read to manpage

[Wolfram Sang]

[-- Attachment #1: Type: text/plain, Size: 291 bytes --]

On Wed, Mar 30, 2022 at 12:20:28PM +0200, Wolfram Sang wrote:
> The text was updated, but the mode character was forgotten.
> 
> Fixes: 789af53 ("i2cget: Add support for SMBus block read")
> Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>

Applied to master, thanks!


[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]