* i2000 firmware 117c
@ 2003-06-23 15:16 Richard C Bilson
2003-06-23 15:27 ` Alex Williamson
0 siblings, 1 reply; 2+ messages in thread
From: Richard C Bilson @ 2003-06-23 15:16 UTC (permalink / raw)
To: linux-ia64
Back in May, Alex Williamson from HP observed:
> In short, if you're not up to at least firmware rev 117c on your i2000,
> you need to upgraded. The CPE polling between 2.4 & 2.5 should be pretty
> much identical.
I have an i2000 here that is still running rev 103, and I'd like to
upgrade it. Problem is, it has a C1 processor, and the current
firmware release (130) requires a C2. Is there any way I can get
access to the 117c firmware release?
The good news is that 2.5.72 seems to run fine on the box anyway (with
CONFIG_MCA disabled, mind you); special thanks to Peter Chubb for
fixing the keyboard problem.
--
Richard C. Bilson, Research Assistant | School of Computer Science
rcbilson@plg.uwaterloo.ca | University of Waterloo
http://plg.uwaterloo.ca/~rcbilson | 200 University Avenue West
Office: DC 3548F Ph: (519)888-4567x4822 | Waterloo, Ontario, CANADA N2L 3G1
^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: i2000 firmware 117c
2003-06-23 15:16 i2000 firmware 117c Richard C Bilson
@ 2003-06-23 15:27 ` Alex Williamson
0 siblings, 0 replies; 2+ messages in thread
From: Alex Williamson @ 2003-06-23 15:27 UTC (permalink / raw)
To: linux-ia64
Richard,
See this post on debian-ia64:
http://lists.debian.org/debian-ia64/2003/debian-ia64-200306/msg00008.html
Ben Collins has made an ISO image available with firmware
117c. I put in a request to get 117c back up on the
driver download page at hp.com. It sounded like it was
in progress, but I'll check on it to see it gets done.
Thanks,
Alex
Richard C Bilson wrote:
>
> Back in May, Alex Williamson from HP observed:
>
> > In short, if you're not up to at least firmware rev 117c on your i2000,
> > you need to upgraded. The CPE polling between 2.4 & 2.5 should be pretty
> > much identical.
>
> I have an i2000 here that is still running rev 103, and I'd like to
> upgrade it. Problem is, it has a C1 processor, and the current
> firmware release (130) requires a C2. Is there any way I can get
> access to the 117c firmware release?
>
> The good news is that 2.5.72 seems to run fine on the box anyway (with
> CONFIG_MCA disabled, mind you); special thanks to Peter Chubb for
> fixing the keyboard problem.
>
> --
> Richard C. Bilson, Research Assistant | School of Computer Science
> rcbilson@plg.uwaterloo.ca | University of Waterloo
> http://plg.uwaterloo.ca/~rcbilson | 200 University Avenue West
> Office: DC 3548F Ph: (519)888-4567x4822 | Waterloo, Ontario, CANADA N2L 3G1
> -
> To unsubscribe from this list: send the line "unsubscribe linux-ia64" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
--
Alex Williamson HP Linux & Open Source Lab
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2003-06-23 15:27 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2003-06-23 15:16 i2000 firmware 117c Richard C Bilson
2003-06-23 15:27 ` Alex Williamson
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox