* Re: Possible regression when going from 2.6.26 to 2.6.32
2010-10-30 22:20 ` Wolfgang Karall
@ 2010-11-30 17:26 ` Wolfgang Karall
0 siblings, 0 replies; 4+ messages in thread
From: Wolfgang Karall @ 2010-11-30 17:26 UTC (permalink / raw)
To: linux-ide; +Cc: Mark Lord, saeed.bishara, mlord, tbm
[-- Attachment #1: Type: text/plain, Size: 784 bytes --]
Hello,
On 10/31/2010 12:20 AM, Wolfgang Karall wrote:
> One thing I forgot to mention in the intial mail is that what I think the
> problem might be is that the disks spin up one after the other in this
> NAS box (both when powering on, but also at reboots there is a audible
> delay), and the old version 2.6.26 waited long enough while the newer
> versions don't. At least that's what I gather from the "retrying in
> 5 secs" lines.
Finally got around to testing this out further (on both version 2.6.32
and 2.6.36), and this is indeed a timing issue. Adding a simple "sleep"
to my initramfs setup (as init-top script) led to the drives all being
recognized properly again, see the attached dmesg outputs.
Glad this can be worked around in userland at least.
Cheers
Wolfgang
[-- Attachment #2: dmesg-2.6.32-5-orion5x-2010-11-30 --]
[-- Type: text/plain, Size: 18718 bytes --]
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.32-5-orion5x (Debian 2.6.32-13) (maks@debian.org) (gcc version 4.3.4 (Debian 4.3.4-10) ) #1 Sat May 22 02:17:44 UTC 2010
[ 0.000000] CPU: Feroceon [41069260] revision 0 (ARMv5TEJ), cr=00053177
[ 0.000000] CPU: VIVT data cache, VIVT instruction cache
[ 0.000000] Machine: QNAP TS-409
[ 0.000000] Clearing invalid memory bank 0KB@0x00000000
[ 0.000000] Clearing invalid memory bank 0KB@0x00000000
[ 0.000000] Clearing invalid memory bank 0KB@0x00000000
[ 0.000000] Ignoring unrecognised tag 0x00000000
[ 0.000000] Ignoring unrecognised tag 0x00000000
[ 0.000000] Ignoring unrecognised tag 0x00000000
[ 0.000000] Ignoring unrecognised tag 0x41000403
[ 0.000000] Memory policy: ECC disabled, Data cache writeback
[ 0.000000] On node 0 totalpages: 65536
[ 0.000000] free_area_init_node: node 0, pgdat c038d010, node_mem_map c03f7000
[ 0.000000] Normal zone: 512 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 65024 pages, LIFO batch:15
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 65024
[ 0.000000] Kernel command line: console=ttyS0,115200n8 root=/dev/ram rw initrd=0x800000,0x3fffff
[ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
[ 0.000000] Memory: 256MB = 256MB total
[ 0.000000] Memory: 251520KB available (3244K code, 568K data, 120K init, 0K highmem)
[ 0.000000] SLUB: Genslabs=11, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:64
[ 0.000000] Console: colour dummy device 80x30
[ 0.000194] Calibrating delay loop... 498.07 BogoMIPS (lpj=2490368)
[ 0.250134] Security Framework initialized
[ 0.250169] SELinux: Disabled at boot.
[ 0.250214] Mount-cache hash table entries: 512
[ 0.250850] Initializing cgroup subsys ns
[ 0.250876] Initializing cgroup subsys cpuacct
[ 0.250896] Initializing cgroup subsys devices
[ 0.250916] Initializing cgroup subsys freezer
[ 0.250935] Initializing cgroup subsys net_cls
[ 0.251020] CPU: Testing write buffer coherency: ok
[ 0.252891] devtmpfs: initialized
[ 0.255332] regulator: core version 0.5
[ 0.255716] NET: Registered protocol family 16
[ 0.256560] Orion ID: MV88F5281-D0. TCLK=166666667.
[ 0.256590] Orion: Applying 5281 D0 WFI workaround.
[ 0.305041] pci 0000:00:00.0: reg 10 64bit mmio pref: [0xf1000000-0xf10fffff]
[ 0.305076] pci 0000:00:00.0: reg 18 32bit mmio: [0x000000-0x1fffffff]
[ 0.305210] pci 0000:00:01.0: reg 10 64bit mmio: [0x40000000-0x400fffff]
[ 0.305244] pci 0000:00:01.0: reg 18 io port: [0xf0000000-0xf00000ff]
[ 0.305381] PCI: bus0: Fast back to back transfers disabled
[ 0.305966] pci 0000:01:00.0: reg 10 64bit mmio pref: [0x000000-0xfffffff]
[ 0.306003] pci 0000:01:00.0: reg 18 64bit mmio pref: [0x10000000-0x1fffffff]
[ 0.306039] pci 0000:01:00.0: reg 20 64bit mmio: [0xf1000000-0xf10fffff]
[ 0.306071] pci 0000:01:00.0: reg 30 32bit mmio pref: [0xe0000000-0xe7ffffff]
[ 0.306124] pci 0000:01:00.0: supports D1 D2
[ 0.306145] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot
[ 0.306169] pci 0000:01:00.0: PME# disabled
[ 0.306266] PCI: bus1: Fast back to back transfers enabled
[ 0.309444] bio: create slab <bio-0> at 0
[ 0.310150] vgaarb: loaded
[ 0.311250] Switching to clocksource orion_clocksource
[ 0.320212] NET: Registered protocol family 2
[ 0.320643] IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.322100] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.322512] TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.322723] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.322745] TCP reno registered
[ 0.323156] NET: Registered protocol family 1
[ 0.323567] Unpacking initramfs...
[ 0.928742] Freeing initrd memory: 4092K
[ 0.928889] NetWinder Floating Point Emulator V0.97 (double precision)
[ 0.929488] audit: initializing netlink socket (disabled)
[ 0.929557] type=2000 audit(0.920:1): initialized
[ 0.943267] VFS: Disk quotas dquot_6.5.2
[ 0.943800] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.944040] msgmni has been set to 499
[ 0.945457] alg: No test for stdrng (krng)
[ 0.945733] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.945761] io scheduler noop registered
[ 0.945779] io scheduler anticipatory registered
[ 0.945798] io scheduler deadline registered
[ 0.946275] io scheduler cfq registered (default)
[ 0.958746] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
[ 0.959698] serial8250.0: ttyS0 at MMIO 0xf1012000 (irq = 3) is a 16550A
[ 1.320053] console [ttyS0] enabled
[ 1.324125] serial8250.1: ttyS1 at MMIO 0xf1012100 (irq = 4) is a 16550A
[ 1.331690] physmap platform flash device: 00800000 at ff800000
[ 1.337834] physmap-flash.0: Found 1 x16 devices at 0x0 in 8-bit bank
[ 1.344356] Intel/Sharp Extended Query Table at 0x0031
[ 1.349581] Intel/Sharp Extended Query Table at 0x0031
[ 1.354839] Using buffer write method
[ 1.358491] cfi_cmdset_0001: Erase suspend on write enabled
[ 1.364082] erase region 0: offset=0x0,size=0x20000,blocks=64
[ 1.401960] RedBoot partition parsing not available
[ 1.406833] Using physmap partition information
[ 1.411407] Creating 6 MTD partitions on "physmap-flash.0":
[ 1.416978] 0x000000780000-0x000000800000 : "U-Boot"
[ 1.423133] 0x000000000000-0x000000200000 : "Kernel"
[ 1.429085] 0x000000200000-0x000000600000 : "RootFS1"
[ 1.435201] 0x000000600000-0x000000700000 : "RootFS2"
[ 1.441266] 0x000000760000-0x000000780000 : "U-Boot Config"
[ 1.447895] 0x000000700000-0x000000760000 : "NAS Config"
[ 1.455013] mice: PS/2 mouse device common for all mice
[ 1.461007] i2c /dev entries driver
[ 1.467591] rtc-s35390a 0-0030: rtc core: registered rtc-s35390a as rtc0
[ 1.474849] Registered led device: ts409:red:sata1
[ 1.479740] Registered led device: ts409:red:sata2
[ 1.484683] Registered led device: ts409:red:sata3
[ 1.489603] Registered led device: ts409:red:sata4
[ 1.496518] TCP cubic registered
[ 1.499750] NET: Registered protocol family 17
[ 1.504253] VFP support v0.3: implementor 41 architecture 1 part 10 variant 9 rev 0
[ 1.512574] registered taskstats version 1
[ 1.517737] rtc-s35390a 0-0030: setting system clock to 2010-11-30 10:32:04 UTC (1291113124)
[ 1.526200] Initalizing network drop monitor service
[ 1.531337] Freeing init memory: 120K
[ 62.035876] SCSI subsystem initialized
[ 62.231761] libata version 3.00 loaded.
[ 62.274034] sata_mv 0000:00:01.0: version 1.28
[ 62.279217] sata_mv 0000:00:01.0: Gen-IIE 32 slots 4 ports SCSI mode IRQ via INTx
[ 62.290191] scsi0 : sata_mv
[ 62.293684] scsi1 : sata_mv
[ 62.296923] scsi2 : sata_mv
[ 62.300136] scsi3 : sata_mv
[ 62.303287] ata1: SATA max UDMA/133 mmio m1048576@0xe0000000 port 0xe0022000 irq 11
[ 62.310935] ata2: SATA max UDMA/133 mmio m1048576@0xe0000000 port 0xe0024000 irq 11
[ 62.318622] ata3: SATA max UDMA/133 mmio m1048576@0xe0000000 port 0xe0026000 irq 11
[ 62.326287] ata4: SATA max UDMA/133 mmio m1048576@0xe0000000 port 0xe0028000 irq 11
[ 62.841366] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 62.861874] ata1.00: ATA-7: SAMSUNG HD154UI, 1AG01118, max UDMA7
[ 62.867877] ata1.00: 2930277168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 62.891962] ata1.00: configured for UDMA/133
[ 62.896837] scsi 0:0:0:0: Direct-Access ATA SAMSUNG HD154UI 1AG0 PQ: 0 ANSI: 5
[ 63.411365] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 63.431872] ata2.00: ATA-7: SAMSUNG HD154UI, 1AG01118, max UDMA7
[ 63.437875] ata2.00: 2930277168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 63.461961] ata2.00: configured for UDMA/133
[ 63.466798] scsi 1:0:0:0: Direct-Access ATA SAMSUNG HD154UI 1AG0 PQ: 0 ANSI: 5
[ 63.981367] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 64.001874] ata3.00: ATA-7: SAMSUNG HD154UI, 1AG01118, max UDMA7
[ 64.007874] ata3.00: 2930277168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 64.031963] ata3.00: configured for UDMA/133
[ 64.036809] scsi 2:0:0:0: Direct-Access ATA SAMSUNG HD154UI 1AG0 PQ: 0 ANSI: 5
[ 64.551366] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 64.571871] ata4.00: ATA-7: SAMSUNG HD154UI, 1AG01118, max UDMA7
[ 64.577871] ata4.00: 2930277168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 64.601961] ata4.00: configured for UDMA/133
[ 64.606807] scsi 3:0:0:0: Direct-Access ATA SAMSUNG HD154UI 1AG0 PQ: 0 ANSI: 5
[ 65.705636] sd 0:0:0:0: [sda] 2930277168 512-byte logical blocks: (1.50 TB/1.36 TiB)
[ 65.720999] sd 1:0:0:0: [sdb] 2930277168 512-byte logical blocks: (1.50 TB/1.36 TiB)
[ 65.732499] sd 2:0:0:0: [sdc] 2930277168 512-byte logical blocks: (1.50 TB/1.36 TiB)
[ 65.743061] sd 3:0:0:0: [sdd] 2930277168 512-byte logical blocks: (1.50 TB/1.36 TiB)
[ 65.806934] sd 0:0:0:0: [sda] Write Protect is off
[ 65.811838] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 65.821152] sd 1:0:0:0: [sdb] Write Protect is off
[ 65.826031] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 65.832413] sd 2:0:0:0: [sdc] Write Protect is off
[ 65.837203] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 65.841373] sd 3:0:0:0: [sdd] Write Protect is off
[ 65.846163] sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00
[ 65.877820] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 65.894536] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 65.909414] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 65.923613] sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 66.027646] sda:
[ 66.036703] sdb:
[ 66.041915] sdc:
[ 66.051095] sdd: sda1 sda2 sda3 sda4
[ 66.074164] sdb1 sdb2 sdb3 sdb4
[ 66.096354] sdc1 sdc2 sdc3 sdc4
[ 66.115566] sdd1 sdd2 sdd3 sdd4
[ 66.121374] sd 0:0:0:0: [sda] Attached SCSI disk
[ 66.148464] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 66.155141] sd 2:0:0:0: [sdc] Attached SCSI disk
[ 66.163244] sd 3:0:0:0: [sdd] Attached SCSI disk
[ 67.974112] md: raid1 personality registered for level 1
[ 68.018135] async_tx: api initialized (async)
[ 68.045216] xor: measuring software checksum speed
[ 68.091311] arm4regs : 429.200 MB/sec
[ 68.141303] 8regs : 377.200 MB/sec
[ 68.191309] 32regs : 416.800 MB/sec
[ 68.195488] xor: using function: arm4regs (429.200 MB/sec)
[ 68.393450] raid6: int32x1 24 MB/s
[ 68.561996] raid6: int32x2 35 MB/s
[ 68.732225] raid6: int32x4 47 MB/s
[ 68.902008] raid6: int32x8 42 MB/s
[ 68.905754] raid6: using algorithm int32x4 (47 MB/s)
[ 68.993845] md: raid6 personality registered for level 6
[ 68.999153] md: raid5 personality registered for level 5
[ 69.004532] md: raid4 personality registered for level 4
[ 69.099243] md: md0 stopped.
[ 69.212518] md: bind<sdb1>
[ 69.215732] md: bind<sda1>
[ 69.242851] raid1: raid set md0 active with 2 out of 2 mirrors
[ 69.248879] md0: detected capacity change from 0 to 1998585856
[ 69.265686] md: md1 stopped.
[ 69.288292] md0: unknown partition table
[ 69.393272] md: bind<sdd1>
[ 69.399996] md: bind<sdc1>
[ 69.436289] raid1: raid set md1 active with 2 out of 2 mirrors
[ 69.442407] md1: detected capacity change from 0 to 1998585856
[ 69.458921] md: md2 stopped.
[ 69.478996] md1: unknown partition table
[ 69.585764] md: bind<sdb2>
[ 69.588992] md: bind<sdc2>
[ 69.604215] md: bind<sdd2>
[ 69.607450] md: bind<sda2>
[ 69.639308] raid5: device sda2 operational as raid disk 0
[ 69.644767] raid5: device sdd2 operational as raid disk 3
[ 69.650162] raid5: device sdc2 operational as raid disk 2
[ 69.655580] raid5: device sdb2 operational as raid disk 1
[ 69.666185] raid5: allocated 4228kB for md2
[ 69.674384] 0: w=1 pa=0 pr=4 m=1 a=2 r=4 op1=0 op2=0
[ 69.679352] 3: w=2 pa=0 pr=4 m=1 a=2 r=4 op1=0 op2=0
[ 69.684372] 2: w=3 pa=0 pr=4 m=1 a=2 r=4 op1=0 op2=0
[ 69.689331] 1: w=4 pa=0 pr=4 m=1 a=2 r=4 op1=0 op2=0
[ 69.694315] raid5: raid level 5 set md2 active with 4 out of 4 devices, algorithm 2
[ 69.701977] RAID5 conf printout:
[ 69.705204] --- rd:4 wd:4
[ 69.707914] disk 0, o:1, dev:sda2
[ 69.711332] disk 1, o:1, dev:sdb2
[ 69.714729] disk 2, o:1, dev:sdc2
[ 69.718124] disk 3, o:1, dev:sdd2
[ 69.721835] md2: detected capacity change from 0 to 1499994390528
[ 69.738680] md: md3 stopped.
[ 69.758987] md2: unknown partition table
[ 69.862784] md: bind<sdb3>
[ 69.867489] md: bind<sdc3>
[ 69.870710] md: bind<sdd3>
[ 69.881774] md: bind<sda3>
[ 69.921166] raid5: device sda3 operational as raid disk 0
[ 69.926628] raid5: device sdd3 operational as raid disk 3
[ 69.932043] raid5: device sdc3 operational as raid disk 2
[ 69.937433] raid5: device sdb3 operational as raid disk 1
[ 69.945899] raid5: allocated 4228kB for md3
[ 69.950265] 0: w=1 pa=0 pr=4 m=1 a=2 r=4 op1=0 op2=0
[ 69.955337] 3: w=2 pa=0 pr=4 m=1 a=2 r=4 op1=0 op2=0
[ 69.960300] 2: w=3 pa=0 pr=4 m=1 a=2 r=4 op1=0 op2=0
[ 69.965290] 1: w=4 pa=0 pr=4 m=1 a=2 r=4 op1=0 op2=0
[ 69.970251] raid5: raid level 5 set md3 active with 4 out of 4 devices, algorithm 2
[ 69.977906] RAID5 conf printout:
[ 69.981131] --- rd:4 wd:4
[ 69.983866] disk 0, o:1, dev:sda3
[ 69.987260] disk 1, o:1, dev:sdb3
[ 69.990656] disk 2, o:1, dev:sdc3
[ 69.994078] disk 3, o:1, dev:sdd3
[ 69.997781] md3: detected capacity change from 0 to 1499994390528
[ 70.007221] md3: unknown partition table
[ 70.409194] device-mapper: uevent: version 1.0.3
[ 70.422194] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
[ 70.914203] kjournald starting. Commit interval 5 seconds
[ 70.971869] EXT3 FS on md0, internal journal
[ 70.976158] EXT3-fs: mounted filesystem with ordered data mode.
[ 75.099472] NET: Registered protocol family 10
[ 75.106784] lo: Disabled Privacy Extensions
[ 75.580935] udevd version 125 started
[ 86.695017] usbcore: registered new interface driver usbfs
[ 86.731673] usbcore: registered new interface driver hub
[ 86.749677] usbcore: registered new device driver usb
[ 86.831543] input: gpio-keys as /devices/platform/gpio-keys/input/input0
[ 86.894874] MV-643xx 10/100/1000 ethernet driver version 1.4
[ 86.940006] mv643xx_eth smi: probed
[ 86.977144] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 88.238912] net eth0: port 0 with MAC address 00:00:00:00:51:81
[ 88.245962] orion-ehci orion-ehci.0: Marvell Orion EHCI
[ 88.259151] orion-ehci orion-ehci.0: new USB bus registered, assigned bus number 1
[ 88.341481] orion-ehci orion-ehci.0: irq 17, io mem 0xf1050000
[ 88.361428] orion-ehci orion-ehci.0: USB 2.0 started, EHCI 1.00
[ 88.367439] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 88.374305] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 88.381536] usb usb1: Product: Marvell Orion EHCI
[ 88.386235] usb usb1: Manufacturer: Linux 2.6.32-5-orion5x ehci_hcd
[ 88.392515] usb usb1: SerialNumber: orion-ehci.0
[ 88.451396] usb usb1: configuration #1 chosen from 1 choice
[ 88.458247] hub 1-0:1.0: USB hub found
[ 88.465210] hub 1-0:1.0: 1 port detected
[ 88.781377] usb 1-1: new high speed USB device using orion-ehci and address 2
[ 88.953118] usb 1-1: New USB device found, idVendor=05e3, idProduct=0608
[ 88.959814] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 88.966973] usb 1-1: Product: USB2.0 Hub
[ 89.004396] usb 1-1: configuration #1 chosen from 1 choice
[ 89.032689] hub 1-1:1.0: USB hub found
[ 89.043026] hub 1-1:1.0: 4 ports detected
[ 89.351844] usb 1-1.2: new full speed USB device using orion-ehci and address 3
[ 89.591876] usb 1-1.2: New USB device found, idVendor=04f9, idProduct=000e
[ 89.598742] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 89.606066] usb 1-1.2: Product: HL-1450 series
[ 89.610505] usb 1-1.2: Manufacturer: Brother
[ 89.614844] usb 1-1.2: SerialNumber: K2J988892
[ 89.664354] usb 1-1.2: configuration #1 chosen from 1 choice
[ 90.407483] usblp0: USB Bidirectional printer dev 3 if 0 alt 0 proto 2 vid 0x04F9 pid 0x000E
[ 90.428045] usbcore: registered new interface driver usblp
[ 92.562926] Adding 1951736k swap on /dev/md1. Priority:-1 extents:1 across:1951736k
[ 94.418638] loop: module loaded
[ 97.001733] device-mapper: table: 253:1: adding target device (start sect 2761900032 len 1533067264) caused an alignment inconsistency
[ 99.650159] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 103.026683] eth0: link up, 1000 Mb/s, full duplex, flow control disabled
[ 103.033526] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 109.633141] RPC: Registered udp transport module.
[ 109.637843] RPC: Registered tcp transport module.
[ 109.642612] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 110.054952] Slow work thread pool: Starting up
[ 110.068060] Slow work thread pool: Ready
[ 110.075148] FS-Cache: Loaded
[ 110.317080] FS-Cache: Netfs 'nfs' registered for caching
[ 110.752180] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 147.459237] IPv6 over IPv4 tunneling driver
[ 147.477454] sit0: Disabled Privacy Extensions
[ 147.862277] tun: Universal TUN/TAP device driver, 1.6
[ 147.867568] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 149.117726] sixxs: Disabled Privacy Extensions
[ 156.760012] svc: failed to register lockdv1 RPC service (errno 97).
[ 156.778894] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
[ 156.800946] NFSD: starting 90-second grace period
[ 166.228219] warning: `ntpd' uses 32-bit capabilities (legacy support in use)
[ 256.339700] kjournald starting. Commit interval 5 seconds
[ 256.392440] EXT3 FS on dm-1, internal journal
[ 256.396814] EXT3-fs: mounted filesystem with ordered data mode.
[ 260.260653] kjournald starting. Commit interval 5 seconds
[ 260.349405] EXT3 FS on dm-0, internal journal
[ 260.354704] EXT3-fs: mounted filesystem with ordered data mode.
[-- Attachment #3: dmesg-2.6.36-trunk-orion5x-2010-11-30 --]
[-- Type: text/plain, Size: 19573 bytes --]
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.36-trunk-orion5x (Debian 2.6.36-1~experimental.1) (max@stro.at) (gcc version 4.3.2 (Debian 4.3.2-1.1) ) #1 Sat Oct 30 14:21:25 UTC 2010
[ 0.000000] CPU: Feroceon [41069260] revision 0 (ARMv5TEJ), cr=00053177
[ 0.000000] CPU: VIVT data cache, VIVT instruction cache
[ 0.000000] Machine: QNAP TS-409
[ 0.000000] Clearing invalid memory bank 0KB@0x00000000
[ 0.000000] Clearing invalid memory bank 0KB@0x00000000
[ 0.000000] Clearing invalid memory bank 0KB@0x00000000
[ 0.000000] Ignoring unrecognised tag 0x00000000
[ 0.000000] Ignoring unrecognised tag 0x00000000
[ 0.000000] Ignoring unrecognised tag 0x00000000
[ 0.000000] Ignoring unrecognised tag 0x41000403
[ 0.000000] Memory policy: ECC disabled, Data cache writeback
[ 0.000000] On node 0 totalpages: 65536
[ 0.000000] free_area_init_node: node 0, pgdat c03b18d4, node_mem_map c041b000
[ 0.000000] Normal zone: 512 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 65024 pages, LIFO batch:15
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 65024
[ 0.000000] Kernel command line: console=ttyS0,115200n8 root=/dev/ram rw initrd=0x800000,0x3fffff
[ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
[ 0.000000] Memory: 256MB = 256MB total
[ 0.000000] Memory: 251600k/251600k available, 10544k reserved, 0K highmem
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
[ 0.000000] DMA : 0xffc00000 - 0xffe00000 ( 2 MB)
[ 0.000000] vmalloc : 0xd0800000 - 0xfd800000 ( 720 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xd0000000 ( 256 MB)
[ 0.000000] modules : 0xbf000000 - 0xc0000000 ( 16 MB)
[ 0.000000] .init : 0xc0008000 - 0xc0029000 ( 132 kB)
[ 0.000000] .text : 0xc0029000 - 0xc036f000 (3352 kB)
[ 0.000000] .data : 0xc038a000 - 0xc03b5ba0 ( 175 kB)
[ 0.000000] SLUB: Genslabs=11, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU-based detection of stalled CPUs is disabled.
[ 0.000000] Verbose stalled-CPUs detection is disabled.
[ 0.000000] NR_IRQS:64
[ 0.000000] Console: colour dummy device 80x30
[ 0.000206] Calibrating delay loop... 498.07 BogoMIPS (lpj=2490368)
[ 0.250060] pid_max: default: 32768 minimum: 301
[ 0.250173] Security Framework initialized
[ 0.250207] SELinux: Disabled at boot.
[ 0.250270] Mount-cache hash table entries: 512
[ 0.250890] Initializing cgroup subsys ns
[ 0.250921] Initializing cgroup subsys cpuacct
[ 0.250944] Initializing cgroup subsys devices
[ 0.250966] Initializing cgroup subsys freezer
[ 0.250988] Initializing cgroup subsys net_cls
[ 0.251008] Initializing cgroup subsys blkio
[ 0.251146] CPU: Testing write buffer coherency: ok
[ 0.253268] devtmpfs: initialized
[ 0.255098] regulator: core version 0.5
[ 0.255418] NET: Registered protocol family 16
[ 0.256460] Orion ID: MV88F5281-D0. TCLK=166666667.
[ 0.256493] Orion: Applying 5281 D0 WFI workaround.
[ 0.318434] pci 0000:00:00.0: reg 10: [mem 0xf1000000-0xf10fffff 64bit pref]
[ 0.318473] pci 0000:00:00.0: reg 18: [mem 0x00000000-0x1fffffff]
[ 0.318610] pci 0000:00:01.0: reg 10: [mem 0x40000000-0x400fffff 64bit]
[ 0.318650] pci 0000:00:01.0: reg 18: [io 0xf0000000-0xf00000ff]
[ 0.318805] PCI: bus0: Fast back to back transfers disabled
[ 0.319480] pci 0000:01:00.0: reg 10: [mem 0x00000000-0x0fffffff 64bit pref]
[ 0.319527] pci 0000:01:00.0: reg 18: [mem 0x10000000-0x1fffffff 64bit pref]
[ 0.319569] pci 0000:01:00.0: reg 20: [mem 0xf1000000-0xf10fffff 64bit]
[ 0.319607] pci 0000:01:00.0: reg 30: [mem 0xe0000000-0xe7ffffff pref]
[ 0.319664] pci 0000:01:00.0: supports D1 D2
[ 0.319691] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot
[ 0.319718] pci 0000:01:00.0: PME# disabled
[ 0.319824] PCI: bus1: Fast back to back transfers enabled
[ 0.320154] pci 0000:00:01.0: BAR 0: assigned [mem 0xe0000000-0xe00fffff 64bit]
[ 0.320205] pci 0000:00:01.0: BAR 0: set to [mem 0xe0000000-0xe00fffff 64bit] (PCI address [0xe0000000-0xe00fffff]
[ 0.320248] pci 0000:00:01.0: BAR 2: assigned [io 0x1000-0x10ff]
[ 0.320288] pci 0000:00:01.0: BAR 2: set to [io 0x1000-0x10ff] (PCI address [0x1000-0x10ff]
[ 0.323657] bio: create slab <bio-0> at 0
[ 0.324412] vgaarb: loaded
[ 0.325881] Switching to clocksource orion_clocksource
[ 0.347331] NET: Registered protocol family 2
[ 0.347629] IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.348642] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.349071] TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.349284] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.349308] TCP reno registered
[ 0.349337] UDP hash table entries: 256 (order: 0, 4096 bytes)
[ 0.349390] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[ 0.349765] NET: Registered protocol family 1
[ 0.349872] PCI: CLS 32 bytes, default 32
[ 0.350149] Unpacking initramfs...
[ 1.059366] Freeing initrd memory: 4092K
[ 1.059533] NetWinder Floating Point Emulator V0.97 (double precision)
[ 1.060195] audit: initializing netlink socket (disabled)
[ 1.060272] type=2000 audit(1.050:1): initialized
[ 1.076405] VFS: Disk quotas dquot_6.5.2
[ 1.076895] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 1.077126] msgmni has been set to 499
[ 1.078513] alg: No test for stdrng (krng)
[ 1.079141] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 1.079177] io scheduler noop registered
[ 1.079198] io scheduler deadline registered
[ 1.079314] io scheduler cfq registered (default)
[ 1.080016] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
[ 1.101040] serial8250.0: ttyS0 at MMIO 0xf1012000 (irq = 3) is a 16550A
[ 1.566234] console [ttyS0] enabled
[ 1.590419] serial8250.1: ttyS1 at MMIO 0xf1012100 (irq = 4) is a 16550A
[ 1.598324] physmap platform flash device: 00800000 at ff800000
[ 1.604490] physmap-flash.0: Found 1 x16 devices at 0x0 in 8-bit bank. Manufacturer ID 0x000089 Chip ID 0x000017
[ 1.614730] Intel/Sharp Extended Query Table at 0x0031
[ 1.619903] Intel/Sharp Extended Query Table at 0x0031
[ 1.625043] Using buffer write method
[ 1.628721] cfi_cmdset_0001: Erase suspend on write enabled
[ 1.634327] erase region 0: offset=0x0,size=0x20000,blocks=64
[ 1.676708] RedBoot partition parsing not available
[ 1.681582] Using physmap partition information
[ 1.686170] Creating 6 MTD partitions on "physmap-flash.0":
[ 1.691813] 0x000000780000-0x000000800000 : "U-Boot"
[ 1.698518] 0x000000000000-0x000000200000 : "Kernel"
[ 1.705123] 0x000000200000-0x000000600000 : "RootFS1"
[ 1.711921] 0x000000600000-0x000000700000 : "RootFS2"
[ 1.718749] 0x000000760000-0x000000780000 : "U-Boot Config"
[ 1.726046] 0x000000700000-0x000000760000 : "NAS Config"
[ 1.733761] mice: PS/2 mouse device common for all mice
[ 1.739652] i2c /dev entries driver
[ 1.746410] rtc-s35390a 0-0030: rtc core: registered rtc-s35390a as rtc0
[ 1.753662] Registered led device: ts409:red:sata1
[ 1.753810] Registered led device: ts409:red:sata2
[ 1.753985] Registered led device: ts409:red:sata3
[ 1.754132] Registered led device: ts409:red:sata4
[ 1.755770] TCP cubic registered
[ 1.759057] NET: Registered protocol family 17
[ 1.763524] Registering the dns_resolver key type
[ 1.768294] VFP support v0.3: implementor 41 architecture 1 part 10 variant 9 rev 0
[ 1.776746] registered taskstats version 1
[ 1.781905] rtc-s35390a 0-0030: setting system clock to 2010-11-30 17:19:55 UTC (1291137595)
[ 1.790365] Initalizing network drop monitor service
[ 1.795665] Freeing init memory: 132K
[ 17.342596] SCSI subsystem initialized
[ 17.551813] libata version 3.00 loaded.
[ 17.596693] sata_mv 0000:00:01.0: version 1.28
[ 17.602005] sata_mv 0000:00:01.0: Gen-IIE 32 slots 4 ports SCSI mode IRQ via INTx
[ 17.612999] scsi0 : sata_mv
[ 17.616503] scsi1 : sata_mv
[ 17.619887] scsi2 : sata_mv
[ 17.623183] scsi3 : sata_mv
[ 17.626321] ata1: SATA max UDMA/133 mmio m1048576@0xe0000000 port 0xe0022000 irq 11
[ 17.634024] ata2: SATA max UDMA/133 mmio m1048576@0xe0000000 port 0xe0024000 irq 11
[ 17.641709] ata3: SATA max UDMA/133 mmio m1048576@0xe0000000 port 0xe0026000 irq 11
[ 17.649388] ata4: SATA max UDMA/133 mmio m1048576@0xe0000000 port 0xe0028000 irq 11
[ 18.167103] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 18.187494] ata1.00: ATA-7: SAMSUNG HD154UI, 1AG01118, max UDMA7
[ 18.193497] ata1.00: 2930277168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 18.217462] ata1.00: configured for UDMA/133
[ 18.222375] scsi 0:0:0:0: Direct-Access ATA SAMSUNG HD154UI 1AG0 PQ: 0 ANSI: 5
[ 18.736496] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 18.756852] ata2.00: ATA-7: SAMSUNG HD154UI, 1AG01118, max UDMA7
[ 18.762855] ata2.00: 2930277168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 18.806416] ata2.00: configured for UDMA/133
[ 18.811336] scsi 1:0:0:0: Direct-Access ATA SAMSUNG HD154UI 1AG0 PQ: 0 ANSI: 5
[ 19.326152] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 19.366126] ata3.00: ATA-7: SAMSUNG HD154UI, 1AG01118, max UDMA7
[ 19.372131] ata3.00: 2930277168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 19.416125] ata3.00: configured for UDMA/133
[ 19.421040] scsi 2:0:0:0: Direct-Access ATA SAMSUNG HD154UI 1AG0 PQ: 0 ANSI: 5
[ 22.456011] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 22.476487] ata4.00: ATA-7: SAMSUNG HD154UI, 1AG01118, max UDMA7
[ 22.482496] ata4.00: 2930277168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 22.506507] ata4.00: configured for UDMA/133
[ 22.511409] scsi 3:0:0:0: Direct-Access ATA SAMSUNG HD154UI 1AG0 PQ: 0 ANSI: 5
[ 22.699640] udevd (100): /proc/100/oom_adj is deprecated, please use /proc/100/oom_score_adj instead.
[ 23.554886] sd 0:0:0:0: [sda] 2930277168 512-byte logical blocks: (1.50 TB/1.36 TiB)
[ 23.616726] sd 1:0:0:0: [sdb] 2930277168 512-byte logical blocks: (1.50 TB/1.36 TiB)
[ 23.626824] sd 0:0:0:0: [sda] Write Protect is off
[ 23.631628] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 23.632491] sd 2:0:0:0: [sdc] 2930277168 512-byte logical blocks: (1.50 TB/1.36 TiB)
[ 23.641099] sd 3:0:0:0: [sdd] 2930277168 512-byte logical blocks: (1.50 TB/1.36 TiB)
[ 23.686688] sd 1:0:0:0: [sdb] Write Protect is off
[ 23.691522] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 23.692347] sd 3:0:0:0: [sdd] Write Protect is off
[ 23.697223] sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00
[ 23.698512] sd 2:0:0:0: [sdc] Write Protect is off
[ 23.703315] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 23.703685] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 23.741940] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 23.751387] sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 23.762744] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 23.992120] sdb: sdb1 sdb2 sdb3 sdb4
[ 24.036260] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 24.124030] sda: sda1 sda2 sda3 sda4
[ 24.149148] sdd: sdd1 sdd2 sdd3 sdd4
[ 24.171174] sd 0:0:0:0: [sda] Attached SCSI disk
[ 24.176191] sdc: sdc1 sdc2 sdc3 sdc4
[ 24.197231] sd 3:0:0:0: [sdd] Attached SCSI disk
[ 24.215795] sd 2:0:0:0: [sdc] Attached SCSI disk
[ 27.251383] md: raid1 personality registered for level 1
[ 27.297611] async_tx: api initialized (async)
[ 27.321454] xor: measuring software checksum speed
[ 27.375956] arm4regs : 429.200 MB/sec
[ 27.425952] 8regs : 377.200 MB/sec
[ 27.475950] 32regs : 416.800 MB/sec
[ 27.480136] xor: using function: arm4regs (429.200 MB/sec)
[ 27.686274] raid6: int32x1 23 MB/s
[ 27.856971] raid6: int32x2 35 MB/s
[ 28.026641] raid6: int32x4 46 MB/s
[ 28.197061] raid6: int32x8 42 MB/s
[ 28.200812] raid6: using algorithm int32x4 (46 MB/s)
[ 28.300638] md: raid6 personality registered for level 6
[ 28.306004] md: raid5 personality registered for level 5
[ 28.311309] md: raid4 personality registered for level 4
[ 28.401323] md: md0 stopped.
[ 28.491804] md: bind<sdb1>
[ 28.495093] md: bind<sda1>
[ 28.522205] md/raid1:md0: active with 2 out of 2 mirrors
[ 28.527812] md0: detected capacity change from 0 to 1998585856
[ 28.543644] md: md1 stopped.
[ 28.575068] md0: unknown partition table
[ 28.671778] md: bind<sdd1>
[ 28.677205] md: bind<sdc1>
[ 28.714039] md/raid1:md1: active with 2 out of 2 mirrors
[ 28.719663] md1: detected capacity change from 0 to 1998585856
[ 28.735273] md: md2 stopped.
[ 28.766815] md1: unknown partition table
[ 28.862342] md: bind<sdb2>
[ 28.866419] md: bind<sdc2>
[ 28.876446] md: bind<sdd2>
[ 28.879749] md: bind<sda2>
[ 28.920509] md/raid:md2: device sda2 operational as raid disk 0
[ 28.926508] md/raid:md2: device sdd2 operational as raid disk 3
[ 28.932428] md/raid:md2: device sdc2 operational as raid disk 2
[ 28.938378] md/raid:md2: device sdb2 operational as raid disk 1
[ 28.949376] md/raid:md2: allocated 4228kB
[ 28.957095] md/raid:md2: raid level 5 active with 4 out of 4 devices, algorithm 2
[ 28.964568] RAID conf printout:
[ 28.964589] --- level:5 rd:4 wd:4
[ 28.964614] disk 0, o:1, dev:sda2
[ 28.964638] disk 1, o:1, dev:sdb2
[ 28.964662] disk 2, o:1, dev:sdc2
[ 28.964686] disk 3, o:1, dev:sdd2
[ 28.965019] md2: detected capacity change from 0 to 1499994390528
[ 28.980984] md: md3 stopped.
[ 29.013397] md2: unknown partition table
[ 29.090468] md: bind<sdb3>
[ 29.099660] md: bind<sdc3>
[ 29.106238] md: bind<sdd3>
[ 29.116226] md: bind<sda3>
[ 29.160723] md/raid:md3: device sda3 operational as raid disk 0
[ 29.166711] md/raid:md3: device sdd3 operational as raid disk 3
[ 29.172629] md/raid:md3: device sdc3 operational as raid disk 2
[ 29.178577] md/raid:md3: device sdb3 operational as raid disk 1
[ 29.187241] md/raid:md3: allocated 4228kB
[ 29.191440] md/raid:md3: raid level 5 active with 4 out of 4 devices, algorithm 2
[ 29.199029] RAID conf printout:
[ 29.199053] --- level:5 rd:4 wd:4
[ 29.199078] disk 0, o:1, dev:sda3
[ 29.199103] disk 1, o:1, dev:sdb3
[ 29.199127] disk 2, o:1, dev:sdc3
[ 29.199151] disk 3, o:1, dev:sdd3
[ 29.199494] md3: detected capacity change from 0 to 1499994390528
[ 29.213593] md3: unknown partition table
[ 29.739696] device-mapper: uevent: version 1.0.3
[ 29.758284] device-mapper: ioctl: 4.18.0-ioctl (2010-06-29) initialised: dm-devel@redhat.com
[ 30.250718] EXT3-fs: barriers not enabled
[ 30.269549] kjournald starting. Commit interval 5 seconds
[ 30.316579] EXT3-fs (md0): using internal journal
[ 30.321309] EXT3-fs (md0): mounted filesystem with ordered data mode
[ 34.649017] NET: Registered protocol family 10
[ 34.655640] lo: Disabled Privacy Extensions
[ 35.134951] udevd version 125 started
[ 46.972185] usbcore: registered new interface driver usbfs
[ 47.023994] usbcore: registered new interface driver hub
[ 47.049097] input: gpio-keys as /devices/platform/gpio-keys/input/input0
[ 47.057043] usbcore: registered new device driver usb
[ 47.143905] MV-643xx 10/100/1000 ethernet driver version 1.4
[ 47.167917] mv643xx_eth smi: probed
[ 47.231214] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 48.681953] net eth0: port 0 with MAC address 00:00:00:00:51:81
[ 48.688126] orion-ehci orion-ehci.0: Marvell Orion EHCI
[ 48.693479] orion-ehci orion-ehci.0: new USB bus registered, assigned bus number 1
[ 48.776135] orion-ehci orion-ehci.0: irq 17, io mem 0xf1050000
[ 48.796098] orion-ehci orion-ehci.0: USB 2.0 started, EHCI 1.00
[ 48.802125] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 48.808971] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 48.816225] usb usb1: Product: Marvell Orion EHCI
[ 48.820927] usb usb1: Manufacturer: Linux 2.6.36-trunk-orion5x ehci_hcd
[ 48.827556] usb usb1: SerialNumber: orion-ehci.0
[ 48.852373] hub 1-0:1.0: USB hub found
[ 48.856240] hub 1-0:1.0: 1 port detected
[ 49.176042] usb 1-1: new high speed USB device using orion-ehci and address 2
[ 49.347780] usb 1-1: New USB device found, idVendor=05e3, idProduct=0608
[ 49.354480] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 49.361642] usb 1-1: Product: USB2.0 Hub
[ 49.401864] hub 1-1:1.0: USB hub found
[ 49.426076] hub 1-1:1.0: 4 ports detected
[ 49.736464] usb 1-1.2: new full speed USB device using orion-ehci and address 3
[ 50.113397] usb 1-1.2: New USB device found, idVendor=04f9, idProduct=000e
[ 50.120358] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 50.127688] usb 1-1.2: Product: HL-1450 series
[ 50.132125] usb 1-1.2: Manufacturer: Brother
[ 50.136421] usb 1-1.2: SerialNumber: K2J988892
[ 50.180041] usbcore: registered new interface driver usbserial
[ 50.225526] USB Serial support registered for generic
[ 50.272536] usbcore: registered new interface driver usbserial_generic
[ 50.279115] usbserial: USB Serial Driver core
[ 50.486245] USB Serial support registered for GSM modem (1-port)
[ 50.522099] usbcore: registered new interface driver option
[ 50.527754] option: v0.7.2:USB Driver for GSM modems
[ 51.339791] usblp0: USB Bidirectional printer dev 3 if 0 alt 0 proto 2 vid 0x04F9 pid 0x000E
[ 51.363000] usbcore: registered new interface driver usblp
[ 52.682877] Adding 1951740k swap on /dev/md1. Priority:-1 extents:1 across:1951740k
[ 54.579033] loop: module loaded
[ 57.184931] device-mapper: table: 253:1: adding target device (start sect 2761900032 len 1533067264) caused an alignment inconsistency
[ 59.824027] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 63.028868] eth0: link up, 1000 Mb/s, full duplex, flow control disabled
[ 63.035743] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 71.601099] RPC: Registered udp transport module.
[ 71.605806] RPC: Registered tcp transport module.
[ 71.610712] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 72.043341] FS-Cache: Loaded
[ 72.298830] FS-Cache: Netfs 'nfs' registered for caching
[ 72.759725] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 100.778616] IPv6 over IPv4 tunneling driver
[ 100.796920] sit0: Disabled Privacy Extensions
[ 101.227206] tun: Universal TUN/TAP device driver, 1.6
[ 101.232253] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 102.587931] sixxs: Disabled Privacy Extensions
[ 110.296626] svc: failed to register lockdv1 RPC service (errno 97).
[ 110.304355] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
[ 110.317207] NFSD: starting 90-second grace period
^ permalink raw reply [flat|nested] 4+ messages in thread