* Re: Multiple errors with DVD drive
2022-05-26 23:36 ` Damien Le Moal
2022-05-27 8:50 ` J.J. Berkhout
@ 2022-05-27 10:32 ` J.J. Berkhout
2022-08-05 9:17 ` J.J. Berkhout
1 sibling, 1 reply; 20+ messages in thread
From: J.J. Berkhout @ 2022-05-27 10:32 UTC (permalink / raw)
To: linux-ide
[-- Attachment #1.1.1: Type: text/plain, Size: 1933 bytes --]
Hello,
On 27-05-2022 01:36, Damien Le Moal wrote:
> On 2022/05/26 21:38, J.J. Berkhout wrote:
.
.
>> The problem is:
>> After going from Linux Mint 19.3 Cinnamon kernel 5.4.0-97 to Linux Mint
>> 20.3 Cinnamon kernel 5.4.0-107 I discovered that I could not (reliably)
>> access my optical drive anymore.
>> It produces errors like:
>> ata1.00: exception Emask 0x10 SAct 0x0 SErr 0x40d0000 action 0xe frozen
>> ata1: SError: { PHYRdyChg CommWake 10B8B DevExch }
>> ata1.00: cmd a0/00:00:00:00:fc/00:00:00:00:00/a0 tag 0 pio 131072 in
>> Read(10) 28 00 00 00 05 61 00 00 40 00res
>> 50/00:03:00:00:00/00:00:00:00:00/a0 Emask 0x10 (ATA bus error)
>> blk_update_request: I/O error, dev sr0, sector 5508 op 0x0:(READ) flags
>> 0x80700 phys_seg 19 prio class 0
>> ata1.00: failed to set xfermode (err_mask=0x1)
>>
>> The system was Linux Mint 20.3 Cinnamon with kernel 5.4.0-107-generic,
>> mobo ASRock model X570 Taichi.
>> After some tests I found out:
>> Kernel 5.4.0-99 works OK;
>> Kernel 5.4.0-100 has the problem;
>> Kernel 5.13.0-30 works OK;
>> Kernel 5.13.0-35 has the problem.
>
> It looks like your distro is backporting patches so the patch causing the
> problem could be found by bisecting. While 5.4 kernel is an LTS kernel, the
> latest release is 5.4.196... 5.4.0-100 is the distro version number which does
> not tell me what set of patches it got on top of 5.4.0. These are not
> stable/vanilla kernels.
>
> To get help from this list, you will need to try with a vanilla kernel, ideally
> from git. You could try the latest mainline 5.18 first to see if the problem is
> there or not.
OK, I installed kernel 5.18.0 with 'mainline' (Ubuntu Mainline Kernel
Installer).
Kernel installed was 5.18.0-051800.202205222030.
Same problem existed.
I reverted to the ubuntu 5.13.0-30 kernel.
A copy of the dmesg output is attached.
With kind regards,
Jaap Berkhout.
[-- Attachment #1.1.2: ataerr.log --]
[-- Type: text/x-log, Size: 112050 bytes --]
[ 0.000000] Linux version 5.18.0-051800-generic (kernel@kathleen) (gcc (Ubuntu 11.3.0-3ubuntu1) 11.3.0, GNU ld (GNU Binutils for Ubuntu) 2.38) #202205222030 SMP PREEMPT_DYNAMIC Sun May 22 20:33:46 UTC 2022
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-5.18.0-051800-generic root=UUID=9d60bcb5-650d-484d-ae74-728526cd6db1 ro ipv6.disable=1 elevator=deadline quiet splash nomodeset
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Hygon HygonGenuine
[ 0.000000] Centaur CentaurHauls
[ 0.000000] zhaoxin Shanghai
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'compacted' format.
[ 0.000000] signal: max sigframe size: 1776
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009ffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000000a0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000009afefff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000009aff000-0x0000000009ffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000000a000000-0x000000000a1fffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000a200000-0x000000000a20ffff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000000a210000-0x00000000cb61afff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000cb61b000-0x00000000ccc15fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ccc16000-0x00000000ccc4afff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000ccc4b000-0x00000000cd2c3fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000cd2c4000-0x00000000cdffefff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000cdfff000-0x00000000ceffffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000cf000000-0x00000000cfffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f7ffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fd200000-0x00000000fd2fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fd400000-0x00000000fd5fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fea00000-0x00000000fea0ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000feb80000-0x00000000fec01fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed40000-0x00000000fed44fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fedc2000-0x00000000fedcffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fedd4000-0x00000000fedd5fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000042f37ffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000042f380000-0x000000042fffffff] reserved
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] e820: update [mem 0xc5987018-0xc5995857] usable ==> usable
[ 0.000000] e820: update [mem 0xc5987018-0xc5995857] usable ==> usable
[ 0.000000] e820: update [mem 0xc5966018-0xc5986057] usable ==> usable
[ 0.000000] e820: update [mem 0xc5966018-0xc5986057] usable ==> usable
[ 0.000000] extended physical RAM map:
[ 0.000000] reserve setup_data: [mem 0x0000000000000000-0x000000000009ffff] usable
[ 0.000000] reserve setup_data: [mem 0x00000000000a0000-0x00000000000fffff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000000100000-0x0000000009afefff] usable
[ 0.000000] reserve setup_data: [mem 0x0000000009aff000-0x0000000009ffffff] reserved
[ 0.000000] reserve setup_data: [mem 0x000000000a000000-0x000000000a1fffff] usable
[ 0.000000] reserve setup_data: [mem 0x000000000a200000-0x000000000a20ffff] ACPI NVS
[ 0.000000] reserve setup_data: [mem 0x000000000a210000-0x00000000c5966017] usable
[ 0.000000] reserve setup_data: [mem 0x00000000c5966018-0x00000000c5986057] usable
[ 0.000000] reserve setup_data: [mem 0x00000000c5986058-0x00000000c5987017] usable
[ 0.000000] reserve setup_data: [mem 0x00000000c5987018-0x00000000c5995857] usable
[ 0.000000] reserve setup_data: [mem 0x00000000c5995858-0x00000000cb61afff] usable
[ 0.000000] reserve setup_data: [mem 0x00000000cb61b000-0x00000000ccc15fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000ccc16000-0x00000000ccc4afff] ACPI data
[ 0.000000] reserve setup_data: [mem 0x00000000ccc4b000-0x00000000cd2c3fff] ACPI NVS
[ 0.000000] reserve setup_data: [mem 0x00000000cd2c4000-0x00000000cdffefff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000cdfff000-0x00000000ceffffff] usable
[ 0.000000] reserve setup_data: [mem 0x00000000cf000000-0x00000000cfffffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000f0000000-0x00000000f7ffffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fd200000-0x00000000fd2fffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fd400000-0x00000000fd5fffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fea00000-0x00000000fea0ffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000feb80000-0x00000000fec01fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fed40000-0x00000000fed44fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fedc2000-0x00000000fedcffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fedd4000-0x00000000fedd5fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000100000000-0x000000042f37ffff] usable
[ 0.000000] reserve setup_data: [mem 0x000000042f380000-0x000000042fffffff] reserved
[ 0.000000] efi: EFI v2.70 by American Megatrends
[ 0.000000] efi: ACPI=0xcd2ab000 ACPI 2.0=0xcd2ab014 SMBIOS=0xcde26000 SMBIOS 3.0=0xcde25000 MEMATTR=0xc9b46018 ESRT=0xc78d6098 MOKvar=0xc5a6b000 RNG=0xcde66318
[ 0.000000] efi: seeding entropy pool
[ 0.000000] random: crng init done
[ 0.000000] SMBIOS 3.2.0 present.
[ 0.000000] DMI: To Be Filled By O.E.M. To Be Filled By O.E.M./X570 Taichi, BIOS P3.80 12/01/2020
[ 0.000000] tsc: Fast TSC calibration failed
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] last_pfn = 0x42f380 max_arch_pfn = 0x400000000
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.000000] total RAM covered: 3327M
[ 0.000000] Found optimal setting for mtrr clean up
[ 0.000000] gran_size: 64K chunk_size: 64M num_reg: 4 lose cover RAM: 0G
[ 0.000000] e820: update [mem 0xcd5f0000-0xcd5fffff] usable ==> reserved
[ 0.000000] e820: update [mem 0xd0000000-0xffffffff] usable ==> reserved
[ 0.000000] last_pfn = 0xcf000 max_arch_pfn = 0x400000000
[ 0.000000] esrt: Reserving ESRT space from 0x00000000c78d6098 to 0x00000000c78d60d0.
[ 0.000000] e820: update [mem 0xc78d6000-0xc78d6fff] usable ==> reserved
[ 0.000000] e820: update [mem 0xc5a6b000-0xc5a6bfff] usable ==> reserved
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] Secure boot disabled
[ 0.000000] RAMDISK: [mem 0x34d7e000-0x3c9c9fff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000CD2AB014 000024 (v02 ALASKA)
[ 0.000000] ACPI: XSDT 0x00000000CD2AA728 0000BC (v01 ALASKA A M I 01072009 AMI 01000013)
[ 0.000000] ACPI: FACP 0x00000000CCC3C000 000114 (v06 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: DSDT 0x00000000CCC35000 006854 (v02 ALASKA A M I 01072009 INTL 20120913)
[ 0.000000] ACPI: FACS 0x00000000CD2A5000 000040
[ 0.000000] ACPI: SSDT 0x00000000CCC42000 008C98 (v02 AMD AmdTable 00000002 MSFT 04000000)
[ 0.000000] ACPI: SSDT 0x00000000CCC3E000 003A82 (v01 AMD AMD AOD 00000001 INTL 20120913)
[ 0.000000] ACPI: SSDT 0x00000000CCC3D000 0000C8 (v02 ALASKA CPUSSDT 01072009 AMI 01072009)
[ 0.000000] ACPI: FIDT 0x00000000CCC34000 00009C (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: MCFG 0x00000000CCC33000 00003C (v01 ALASKA A M I 01072009 MSFT 00010013)
[ 0.000000] ACPI: AAFT 0x00000000CCC32000 0000ED (v01 ALASKA OEMAAFT 01072009 MSFT 00000097)
[ 0.000000] ACPI: HPET 0x00000000CCC31000 000038 (v01 ALASKA A M I 01072009 AMI 00000005)
[ 0.000000] ACPI: SSDT 0x00000000CCC30000 000024 (v01 AMD BIXBY 00001000 INTL 20120913)
[ 0.000000] ACPI: BGRT 0x00000000CCC2F000 000038 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: PCCT 0x00000000CCC2E000 00006E (v02 AMD AmdTable 00000001 AMD 00000000)
[ 0.000000] ACPI: SSDT 0x00000000CCC2B000 002F29 (v02 AMD AmdTable 00000001 AMD 00000001)
[ 0.000000] ACPI: CRAT 0x00000000CCC2A000 000B58 (v01 AMD AmdTable 00000001 AMD 00000001)
[ 0.000000] ACPI: CDIT 0x00000000CCC29000 000029 (v01 AMD AmdTable 00000001 AMD 00000001)
[ 0.000000] ACPI: SSDT 0x00000000CCC25000 00348C (v01 AMD QOGIRN 00000001 INTL 20120913)
[ 0.000000] ACPI: WSMT 0x00000000CCC24000 000028 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: APIC 0x00000000CCC23000 00015E (v03 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: SSDT 0x00000000CCC21000 0010AF (v01 AMD QOGIRC 00000001 INTL 20120913)
[ 0.000000] ACPI: FPDT 0x00000000CCC20000 000044 (v01 ALASKA A M I 01072009 AMI 01000013)
[ 0.000000] ACPI: Reserving FACP table memory at [mem 0xccc3c000-0xccc3c113]
[ 0.000000] ACPI: Reserving DSDT table memory at [mem 0xccc35000-0xccc3b853]
[ 0.000000] ACPI: Reserving FACS table memory at [mem 0xcd2a5000-0xcd2a503f]
[ 0.000000] ACPI: Reserving SSDT table memory at [mem 0xccc42000-0xccc4ac97]
[ 0.000000] ACPI: Reserving SSDT table memory at [mem 0xccc3e000-0xccc41a81]
[ 0.000000] ACPI: Reserving SSDT table memory at [mem 0xccc3d000-0xccc3d0c7]
[ 0.000000] ACPI: Reserving FIDT table memory at [mem 0xccc34000-0xccc3409b]
[ 0.000000] ACPI: Reserving MCFG table memory at [mem 0xccc33000-0xccc3303b]
[ 0.000000] ACPI: Reserving AAFT table memory at [mem 0xccc32000-0xccc320ec]
[ 0.000000] ACPI: Reserving HPET table memory at [mem 0xccc31000-0xccc31037]
[ 0.000000] ACPI: Reserving SSDT table memory at [mem 0xccc30000-0xccc30023]
[ 0.000000] ACPI: Reserving BGRT table memory at [mem 0xccc2f000-0xccc2f037]
[ 0.000000] ACPI: Reserving PCCT table memory at [mem 0xccc2e000-0xccc2e06d]
[ 0.000000] ACPI: Reserving SSDT table memory at [mem 0xccc2b000-0xccc2df28]
[ 0.000000] ACPI: Reserving CRAT table memory at [mem 0xccc2a000-0xccc2ab57]
[ 0.000000] ACPI: Reserving CDIT table memory at [mem 0xccc29000-0xccc29028]
[ 0.000000] ACPI: Reserving SSDT table memory at [mem 0xccc25000-0xccc2848b]
[ 0.000000] ACPI: Reserving WSMT table memory at [mem 0xccc24000-0xccc24027]
[ 0.000000] ACPI: Reserving APIC table memory at [mem 0xccc23000-0xccc2315d]
[ 0.000000] ACPI: Reserving SSDT table memory at [mem 0xccc21000-0xccc220ae]
[ 0.000000] ACPI: Reserving FPDT table memory at [mem 0xccc20000-0xccc20043]
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000042f37ffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x42f355000-0x42f37ffff]
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x000000042f37ffff]
[ 0.000000] Device empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009ffff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x0000000009afefff]
[ 0.000000] node 0: [mem 0x000000000a000000-0x000000000a1fffff]
[ 0.000000] node 0: [mem 0x000000000a210000-0x00000000cb61afff]
[ 0.000000] node 0: [mem 0x00000000cdfff000-0x00000000ceffffff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x000000042f37ffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000042f37ffff]
[ 0.000000] On node 0, zone DMA: 1 pages in unavailable ranges
[ 0.000000] On node 0, zone DMA: 96 pages in unavailable ranges
[ 0.000000] On node 0, zone DMA32: 1281 pages in unavailable ranges
[ 0.000000] On node 0, zone DMA32: 16 pages in unavailable ranges
[ 0.000000] On node 0, zone DMA32: 10724 pages in unavailable ranges
[ 0.000000] On node 0, zone Normal: 4096 pages in unavailable ranges
[ 0.000000] On node 0, zone Normal: 3200 pages in unavailable ranges
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.000000] IOAPIC[0]: apic_id 13, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] IOAPIC[1]: apic_id 14, version 33, address 0xfec01000, GSI 24-55
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x10228201 base: 0xfed00000
[ 0.000000] e820: update [mem 0xc781d000-0xc785dfff] usable ==> reserved
[ 0.000000] smpboot: Allowing 32 CPUs, 20 hotplug CPUs
[ 0.000000] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[ 0.000000] PM: hibernation: Registered nosave memory: [mem 0x09aff000-0x09ffffff]
[ 0.000000] PM: hibernation: Registered nosave memory: [mem 0x0a200000-0x0a20ffff]
[ 0.000000] PM: hibernation: Registered nosave memory: [mem 0xc5966000-0xc5966fff]
[ 0.000000] PM: hibernation: Registered nosave memory: [mem 0xc5986000-0xc5986fff]
[ 0.000000] PM: hibernation: Registered nosave memory: [mem 0xc5987000-0xc5987fff]
[ 0.000000] PM: hibernation: Registered nosave memory: [mem 0xc5995000-0xc5995fff]
[ 0.000000] PM: hibernation: Registered nosave memory: [mem 0xc5a6b000-0xc5a6bfff]
[ 0.000000] PM: hibernation: Registered nosave memory: [mem 0xc781d000-0xc785dfff]
[ 0.000000] PM: hibernation: Registered nosave memory: [mem 0xc78d6000-0xc78d6fff]
[ 0.000000] PM: hibernation: Registered nosave memory: [mem 0xcb61b000-0xccc15fff]
[ 0.000000] PM: hibernation: Registered nosave memory: [mem 0xccc16000-0xccc4afff]
[ 0.000000] PM: hibernation: Registered nosave memory: [mem 0xccc4b000-0xcd2c3fff]
[ 0.000000] PM: hibernation: Registered nosave memory: [mem 0xcd2c4000-0xcdffefff]
[ 0.000000] PM: hibernation: Registered nosave memory: [mem 0xcf000000-0xcfffffff]
[ 0.000000] PM: hibernation: Registered nosave memory: [mem 0xd0000000-0xefffffff]
[ 0.000000] PM: hibernation: Registered nosave memory: [mem 0xf0000000-0xf7ffffff]
[ 0.000000] PM: hibernation: Registered nosave memory: [mem 0xf8000000-0xfd1fffff]
[ 0.000000] PM: hibernation: Registered nosave memory: [mem 0xfd200000-0xfd2fffff]
[ 0.000000] PM: hibernation: Registered nosave memory: [mem 0xfd300000-0xfd3fffff]
[ 0.000000] PM: hibernation: Registered nosave memory: [mem 0xfd400000-0xfd5fffff]
[ 0.000000] PM: hibernation: Registered nosave memory: [mem 0xfd600000-0xfe9fffff]
[ 0.000000] PM: hibernation: Registered nosave memory: [mem 0xfea00000-0xfea0ffff]
[ 0.000000] PM: hibernation: Registered nosave memory: [mem 0xfea10000-0xfeb7ffff]
[ 0.000000] PM: hibernation: Registered nosave memory: [mem 0xfeb80000-0xfec01fff]
[ 0.000000] PM: hibernation: Registered nosave memory: [mem 0xfec02000-0xfec0ffff]
[ 0.000000] PM: hibernation: Registered nosave memory: [mem 0xfec10000-0xfec10fff]
[ 0.000000] PM: hibernation: Registered nosave memory: [mem 0xfec11000-0xfecfffff]
[ 0.000000] PM: hibernation: Registered nosave memory: [mem 0xfed00000-0xfed00fff]
[ 0.000000] PM: hibernation: Registered nosave memory: [mem 0xfed01000-0xfed3ffff]
[ 0.000000] PM: hibernation: Registered nosave memory: [mem 0xfed40000-0xfed44fff]
[ 0.000000] PM: hibernation: Registered nosave memory: [mem 0xfed45000-0xfed7ffff]
[ 0.000000] PM: hibernation: Registered nosave memory: [mem 0xfed80000-0xfed8ffff]
[ 0.000000] PM: hibernation: Registered nosave memory: [mem 0xfed90000-0xfedc1fff]
[ 0.000000] PM: hibernation: Registered nosave memory: [mem 0xfedc2000-0xfedcffff]
[ 0.000000] PM: hibernation: Registered nosave memory: [mem 0xfedd0000-0xfedd3fff]
[ 0.000000] PM: hibernation: Registered nosave memory: [mem 0xfedd4000-0xfedd5fff]
[ 0.000000] PM: hibernation: Registered nosave memory: [mem 0xfedd6000-0xfeffffff]
[ 0.000000] PM: hibernation: Registered nosave memory: [mem 0xff000000-0xffffffff]
[ 0.000000] [mem 0xd0000000-0xefffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.000000] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:32 nr_cpu_ids:32 nr_node_ids:1
[ 0.000000] percpu: Embedded 61 pages/cpu s212992 r8192 d28672 u262144
[ 0.000000] pcpu-alloc: s212992 r8192 d28672 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 [0] 08 09 10 11 12 13 14 15
[ 0.000000] pcpu-alloc: [0] 16 17 18 19 20 21 22 23 [0] 24 25 26 27 28 29 30 31
[ 0.000000] Fallback order for Node 0: 0
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 4109496
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-5.18.0-051800-generic root=UUID=9d60bcb5-650d-484d-ae74-728526cd6db1 ro ipv6.disable=1 elevator=deadline quiet splash nomodeset
[ 0.000000] Kernel parameter elevator= does not have any effect anymore.
Please use sysfs to set IO scheduler for individual devices.
[ 0.000000] Booted with the nomodeset parameter. Only the system framebuffer will be available
[ 0.000000] Unknown kernel command line parameters "splash BOOT_IMAGE=/vmlinuz-5.18.0-051800-generic", will be passed to user space.
[ 0.000000] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear)
[ 0.000000] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
[ 0.000000] mem auto-init: stack:off, heap alloc:on, heap free:off
[ 0.000000] Memory: 16057472K/16699560K available (16392K kernel code, 4567K rwdata, 10976K rodata, 2764K init, 4800K bss, 641828K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=32, Nodes=1
[ 0.000000] ftrace: allocating 51202 entries in 201 pages
[ 0.000000] ftrace: allocated 201 pages with 4 groups
[ 0.000000] Dynamic Preempt: voluntary
[ 0.000000] rcu: Preemptible hierarchical RCU implementation.
[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=32.
[ 0.000000] Trampoline variant of Tasks RCU enabled.
[ 0.000000] Rude variant of Tasks RCU enabled.
[ 0.000000] Tracing variant of Tasks RCU enabled.
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=32
[ 0.000000] NR_IRQS: 524544, nr_irqs: 1224, preallocated irqs: 16
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] printk: console [tty0] enabled
[ 0.000000] ACPI: Core revision 20211217
[ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns
[ 0.000000] APIC: Switch to symmetric I/O mode setup
[ 0.000000] Switched APIC routing to physical flat.
[ 0.000000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.028000] tsc: PIT calibration matches HPET. 2 loops
[ 0.028000] tsc: Detected 3799.842 MHz processor
[ 0.000002] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x6d8b860a2c5, max_idle_ns: 881590565945 ns
[ 0.000005] Calibrating delay loop (skipped), value calculated using timer frequency.. 7599.68 BogoMIPS (lpj=15199368)
[ 0.000006] pid_max: default: 32768 minimum: 301
[ 0.002900] LSM: Security Framework initializing
[ 0.002909] landlock: Up and running.
[ 0.002909] Yama: becoming mindful.
[ 0.002923] AppArmor: AppArmor initialized
[ 0.002959] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
[ 0.002979] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
[ 0.003128] x86/cpu: User Mode Instruction Prevention (UMIP) activated
[ 0.003179] LVT offset 1 assigned for vector 0xf9
[ 0.003305] LVT offset 2 assigned for vector 0xf4
[ 0.003340] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 512
[ 0.003340] Last level dTLB entries: 4KB 2048, 2MB 2048, 4MB 1024, 1GB 0
[ 0.003343] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[ 0.003344] Spectre V2 : Mitigation: Retpolines
[ 0.003344] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[ 0.003345] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[ 0.003346] Spectre V2 : User space: Mitigation: STIBP via prctl
[ 0.003347] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl
[ 0.005014] Freeing SMP alternatives memory: 40K
[ 0.113561] smpboot: CPU0: AMD Ryzen 5 3600X 6-Core Processor (family: 0x17, model: 0x71, stepping: 0x0)
[ 0.113627] cblist_init_generic: Setting adjustable number of callback queues.
[ 0.113630] cblist_init_generic: Setting shift to 5 and lim to 1.
[ 0.113641] cblist_init_generic: Setting shift to 5 and lim to 1.
[ 0.113650] cblist_init_generic: Setting shift to 5 and lim to 1.
[ 0.113657] Performance Events: Fam17h+ core perfctr, AMD PMU driver.
[ 0.113660] ... version: 0
[ 0.113661] ... bit width: 48
[ 0.113661] ... generic registers: 6
[ 0.113662] ... value mask: 0000ffffffffffff
[ 0.113662] ... max period: 00007fffffffffff
[ 0.113663] ... fixed-purpose events: 0
[ 0.113663] ... event mask: 000000000000003f
[ 0.113699] rcu: Hierarchical SRCU implementation.
[ 0.113992] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[ 0.114127] smp: Bringing up secondary CPUs ...
[ 0.114182] x86: Booting SMP configuration:
[ 0.114182] .... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7 #8 #9 #10 #11
[ 0.136437] smp: Brought up 1 node, 12 CPUs
[ 0.136439] smpboot: Max logical packages: 3
[ 0.136439] smpboot: Total of 12 processors activated (91196.20 BogoMIPS)
[ 0.137222] devtmpfs: initialized
[ 0.137222] x86/mm: Memory block size: 128MB
[ 0.140494] ACPI: PM: Registering ACPI NVS region [mem 0x0a200000-0x0a20ffff] (65536 bytes)
[ 0.140494] ACPI: PM: Registering ACPI NVS region [mem 0xccc4b000-0xcd2c3fff] (6787072 bytes)
[ 0.140494] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.140494] futex hash table entries: 8192 (order: 7, 524288 bytes, linear)
[ 0.140494] pinctrl core: initialized pinctrl subsystem
[ 0.140494] PM: RTC time: 09:54:17, date: 2022-05-27
[ 0.140497] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[ 0.140646] DMA: preallocated 2048 KiB GFP_KERNEL pool for atomic allocations
[ 0.140736] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[ 0.140829] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[ 0.140833] audit: initializing netlink subsys (disabled)
[ 0.140837] audit: type=2000 audit(1653645257.168:1): state=initialized audit_enabled=0 res=1
[ 0.140837] thermal_sys: Registered thermal governor 'fair_share'
[ 0.140837] thermal_sys: Registered thermal governor 'bang_bang'
[ 0.140837] thermal_sys: Registered thermal governor 'step_wise'
[ 0.140837] thermal_sys: Registered thermal governor 'user_space'
[ 0.140837] thermal_sys: Registered thermal governor 'power_allocator'
[ 0.140837] EISA bus registered
[ 0.140837] cpuidle: using governor ladder
[ 0.140837] cpuidle: using governor menu
[ 0.140837] Detected 1 PCC Subspaces
[ 0.140837] Registering PCC driver as Mailbox controller
[ 0.140837] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.140837] PCI: MMCONFIG for domain 0000 [bus 00-7f] at [mem 0xf0000000-0xf7ffffff] (base 0xf0000000)
[ 0.140837] PCI: MMCONFIG at [mem 0xf0000000-0xf7ffffff] reserved in E820
[ 0.140837] PCI: Using configuration type 1 for base access
[ 0.141046] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
[ 0.141051] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[ 0.141051] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.141051] ACPI: Added _OSI(Module Device)
[ 0.141051] ACPI: Added _OSI(Processor Device)
[ 0.141051] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.141051] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.141051] ACPI: Added _OSI(Linux-Dell-Video)
[ 0.141051] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[ 0.141051] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[ 0.153624] ACPI: 8 ACPI AML tables successfully acquired and loaded
[ 0.154869] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[ 0.157594] ACPI: Interpreter enabled
[ 0.157605] ACPI: PM: (supports S0 S3 S4 S5)
[ 0.157606] ACPI: Using IOAPIC for interrupt routing
[ 0.157868] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.158187] ACPI: Enabled 2 GPEs in block 00 to 1F
[ 0.166042] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.166047] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
[ 0.166168] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR]
[ 0.166175] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-7f] only partially covers this bridge
[ 0.166458] PCI host bridge to bus 0000:00
[ 0.166460] pci_bus 0000:00: root bus resource [io 0x0000-0x03af window]
[ 0.166461] pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7 window]
[ 0.166462] pci_bus 0000:00: root bus resource [io 0x03b0-0x03df window]
[ 0.166462] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.166463] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000dffff window]
[ 0.166464] pci_bus 0000:00: root bus resource [mem 0xd0000000-0xfec02fff window]
[ 0.166465] pci_bus 0000:00: root bus resource [mem 0xfee00000-0xffffffff window]
[ 0.166466] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.166475] pci 0000:00:00.0: [1022:1480] type 00 class 0x060000
[ 0.166548] pci 0000:00:01.0: [1022:1482] type 00 class 0x060000
[ 0.166594] pci 0000:00:01.2: [1022:1483] type 01 class 0x060400
[ 0.166619] pci 0000:00:01.2: enabling Extended Tags
[ 0.166665] pci 0000:00:01.2: PME# supported from D0 D3hot D3cold
[ 0.166752] pci 0000:00:02.0: [1022:1482] type 00 class 0x060000
[ 0.166800] pci 0000:00:03.0: [1022:1482] type 00 class 0x060000
[ 0.166845] pci 0000:00:03.1: [1022:1483] type 01 class 0x060400
[ 0.166924] pci 0000:00:03.1: PME# supported from D0 D3hot D3cold
[ 0.167011] pci 0000:00:04.0: [1022:1482] type 00 class 0x060000
[ 0.167060] pci 0000:00:05.0: [1022:1482] type 00 class 0x060000
[ 0.167108] pci 0000:00:07.0: [1022:1482] type 00 class 0x060000
[ 0.167152] pci 0000:00:07.1: [1022:1484] type 01 class 0x060400
[ 0.167175] pci 0000:00:07.1: enabling Extended Tags
[ 0.167213] pci 0000:00:07.1: PME# supported from D0 D3hot D3cold
[ 0.167284] pci 0000:00:08.0: [1022:1482] type 00 class 0x060000
[ 0.167329] pci 0000:00:08.1: [1022:1484] type 01 class 0x060400
[ 0.167354] pci 0000:00:08.1: enabling Extended Tags
[ 0.167394] pci 0000:00:08.1: PME# supported from D0 D3hot D3cold
[ 0.167486] pci 0000:00:14.0: [1022:790b] type 00 class 0x0c0500
[ 0.167582] pci 0000:00:14.3: [1022:790e] type 00 class 0x060100
[ 0.167682] pci 0000:00:18.0: [1022:1440] type 00 class 0x060000
[ 0.167703] pci 0000:00:18.1: [1022:1441] type 00 class 0x060000
[ 0.167724] pci 0000:00:18.2: [1022:1442] type 00 class 0x060000
[ 0.167745] pci 0000:00:18.3: [1022:1443] type 00 class 0x060000
[ 0.167766] pci 0000:00:18.4: [1022:1444] type 00 class 0x060000
[ 0.167789] pci 0000:00:18.5: [1022:1445] type 00 class 0x060000
[ 0.167809] pci 0000:00:18.6: [1022:1446] type 00 class 0x060000
[ 0.167830] pci 0000:00:18.7: [1022:1447] type 00 class 0x060000
[ 0.167902] pci 0000:01:00.0: [1022:57ad] type 01 class 0x060400
[ 0.167957] pci 0000:01:00.0: enabling Extended Tags
[ 0.168043] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
[ 0.168141] pci 0000:01:00.0: 63.012 Gb/s available PCIe bandwidth, limited by 16.0 GT/s PCIe x4 link at 0000:00:01.2 (capable of 126.024 Gb/s with 16.0 GT/s PCIe x8 link)
[ 0.168183] pci 0000:00:01.2: PCI bridge to [bus 01-0c]
[ 0.168187] pci 0000:00:01.2: bridge window [io 0xd000-0xefff]
[ 0.168189] pci 0000:00:01.2: bridge window [mem 0xfc200000-0xfc8fffff]
[ 0.168432] pci 0000:02:03.0: [1022:57a3] type 01 class 0x060400
[ 0.168502] pci 0000:02:03.0: enabling Extended Tags
[ 0.168750] pci 0000:02:03.0: PME# supported from D0 D3hot D3cold
[ 0.169168] pci 0000:02:05.0: [1022:57a3] type 01 class 0x060400
[ 0.169237] pci 0000:02:05.0: enabling Extended Tags
[ 0.169485] pci 0000:02:05.0: PME# supported from D0 D3hot D3cold
[ 0.169912] pci 0000:02:08.0: [1022:57a4] type 01 class 0x060400
[ 0.169982] pci 0000:02:08.0: enabling Extended Tags
[ 0.170139] pci 0000:02:08.0: PME# supported from D0 D3hot D3cold
[ 0.170312] pci 0000:02:09.0: [1022:57a4] type 01 class 0x060400
[ 0.170381] pci 0000:02:09.0: enabling Extended Tags
[ 0.170539] pci 0000:02:09.0: PME# supported from D0 D3hot D3cold
[ 0.170704] pci 0000:02:0a.0: [1022:57a4] type 01 class 0x060400
[ 0.170773] pci 0000:02:0a.0: enabling Extended Tags
[ 0.170951] pci 0000:02:0a.0: PME# supported from D0 D3hot D3cold
[ 0.171124] pci 0000:01:00.0: PCI bridge to [bus 02-0c]
[ 0.171130] pci 0000:01:00.0: bridge window [io 0xd000-0xefff]
[ 0.171134] pci 0000:01:00.0: bridge window [mem 0xfc200000-0xfc8fffff]
[ 0.171238] pci 0000:03:00.0: [1b21:1184] type 01 class 0x060400
[ 0.171314] pci 0000:03:00.0: enabling Extended Tags
[ 0.171407] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
[ 0.171548] pci 0000:02:03.0: PCI bridge to [bus 03-08]
[ 0.171554] pci 0000:02:03.0: bridge window [io 0xe000-0xefff]
[ 0.171558] pci 0000:02:03.0: bridge window [mem 0xfc400000-0xfc5fffff]
[ 0.171631] pci 0000:04:01.0: [1b21:1184] type 01 class 0x060400
[ 0.171710] pci 0000:04:01.0: enabling Extended Tags
[ 0.171799] pci 0000:04:01.0: PME# supported from D0 D3hot D3cold
[ 0.171900] pci 0000:04:03.0: [1b21:1184] type 01 class 0x060400
[ 0.171979] pci 0000:04:03.0: enabling Extended Tags
[ 0.172070] pci 0000:04:03.0: PME# supported from D0 D3hot D3cold
[ 0.172171] pci 0000:04:05.0: [1b21:1184] type 01 class 0x060400
[ 0.172250] pci 0000:04:05.0: enabling Extended Tags
[ 0.172339] pci 0000:04:05.0: PME# supported from D0 D3hot D3cold
[ 0.172443] pci 0000:04:07.0: [1b21:1184] type 01 class 0x060400
[ 0.172522] pci 0000:04:07.0: enabling Extended Tags
[ 0.172611] pci 0000:04:07.0: PME# supported from D0 D3hot D3cold
[ 0.172732] pci 0000:03:00.0: PCI bridge to [bus 04-08]
[ 0.172740] pci 0000:03:00.0: bridge window [io 0xe000-0xefff]
[ 0.172744] pci 0000:03:00.0: bridge window [mem 0xfc400000-0xfc5fffff]
[ 0.172834] pci 0000:05:00.0: [8086:2723] type 00 class 0x028000
[ 0.172873] pci 0000:05:00.0: reg 0x10: [mem 0xfc500000-0xfc503fff 64bit]
[ 0.173081] pci 0000:05:00.0: PME# supported from D0 D3hot D3cold
[ 0.173254] pci 0000:04:01.0: PCI bridge to [bus 05]
[ 0.173265] pci 0000:04:01.0: bridge window [mem 0xfc500000-0xfc5fffff]
[ 0.173319] pci 0000:04:03.0: PCI bridge to [bus 06]
[ 0.173430] pci 0000:07:00.0: [8086:1539] type 00 class 0x020000
[ 0.173469] pci 0000:07:00.0: reg 0x10: [mem 0xfc400000-0xfc41ffff]
[ 0.173510] pci 0000:07:00.0: reg 0x18: [io 0xe000-0xe01f]
[ 0.173531] pci 0000:07:00.0: reg 0x1c: [mem 0xfc420000-0xfc423fff]
[ 0.173752] pci 0000:07:00.0: PME# supported from D0 D3hot D3cold
[ 0.173940] pci 0000:04:05.0: PCI bridge to [bus 07]
[ 0.173948] pci 0000:04:05.0: bridge window [io 0xe000-0xefff]
[ 0.173952] pci 0000:04:05.0: bridge window [mem 0xfc400000-0xfc4fffff]
[ 0.174006] pci 0000:04:07.0: PCI bridge to [bus 08]
[ 0.174182] pci 0000:09:00.0: [8086:10d3] type 00 class 0x020000
[ 0.174212] pci 0000:09:00.0: reg 0x10: [mem 0xfc8c0000-0xfc8dffff]
[ 0.174226] pci 0000:09:00.0: reg 0x14: [mem 0xfc800000-0xfc87ffff]
[ 0.174240] pci 0000:09:00.0: reg 0x18: [io 0xd000-0xd01f]
[ 0.174254] pci 0000:09:00.0: reg 0x1c: [mem 0xfc8e0000-0xfc8e3fff]
[ 0.174295] pci 0000:09:00.0: reg 0x30: [mem 0xfc880000-0xfc8bffff pref]
[ 0.174428] pci 0000:09:00.0: PME# supported from D0 D3hot D3cold
[ 0.174574] pci 0000:02:05.0: PCI bridge to [bus 09]
[ 0.174580] pci 0000:02:05.0: bridge window [io 0xd000-0xdfff]
[ 0.174583] pci 0000:02:05.0: bridge window [mem 0xfc800000-0xfc8fffff]
[ 0.174698] pci 0000:0a:00.0: [1022:1485] type 00 class 0x130000
[ 0.174764] pci 0000:0a:00.0: enabling Extended Tags
[ 0.174923] pci 0000:0a:00.0: 63.012 Gb/s available PCIe bandwidth, limited by 16.0 GT/s PCIe x4 link at 0000:00:01.2 (capable of 252.048 Gb/s with 16.0 GT/s PCIe x16 link)
[ 0.175085] pci 0000:0a:00.1: [1022:149c] type 00 class 0x0c0330
[ 0.175386] pci 0000:0a:00.1: reg 0x10: [mem 0xfc300000-0xfc3fffff 64bit]
[ 0.176220] pci 0000:0a:00.1: enabling Extended Tags
[ 0.176719] pci 0000:0a:00.1: PME# supported from D0 D3hot D3cold
[ 0.177126] pci 0000:0a:00.3: [1022:149c] type 00 class 0x0c0330
[ 0.177151] pci 0000:0a:00.3: reg 0x10: [mem 0xfc200000-0xfc2fffff 64bit]
[ 0.177210] pci 0000:0a:00.3: enabling Extended Tags
[ 0.177282] pci 0000:0a:00.3: PME# supported from D0 D3hot D3cold
[ 0.177406] pci 0000:02:08.0: PCI bridge to [bus 0a]
[ 0.177415] pci 0000:02:08.0: bridge window [mem 0xfc200000-0xfc3fffff]
[ 0.177510] pci 0000:0b:00.0: [1022:7901] type 00 class 0x010601
[ 0.177579] pci 0000:0b:00.0: reg 0x24: [mem 0xfc700000-0xfc7007ff]
[ 0.177598] pci 0000:0b:00.0: enabling Extended Tags
[ 0.177694] pci 0000:0b:00.0: PME# supported from D3hot D3cold
[ 0.177774] pci 0000:0b:00.0: 63.012 Gb/s available PCIe bandwidth, limited by 16.0 GT/s PCIe x4 link at 0000:00:01.2 (capable of 252.048 Gb/s with 16.0 GT/s PCIe x16 link)
[ 0.177822] pci 0000:02:09.0: PCI bridge to [bus 0b]
[ 0.177830] pci 0000:02:09.0: bridge window [mem 0xfc700000-0xfc7fffff]
[ 0.177924] pci 0000:0c:00.0: [1022:7901] type 00 class 0x010601
[ 0.177993] pci 0000:0c:00.0: reg 0x24: [mem 0xfc600000-0xfc6007ff]
[ 0.178012] pci 0000:0c:00.0: enabling Extended Tags
[ 0.178109] pci 0000:0c:00.0: PME# supported from D3hot D3cold
[ 0.178188] pci 0000:0c:00.0: 63.012 Gb/s available PCIe bandwidth, limited by 16.0 GT/s PCIe x4 link at 0000:00:01.2 (capable of 252.048 Gb/s with 16.0 GT/s PCIe x16 link)
[ 0.178235] pci 0000:02:0a.0: PCI bridge to [bus 0c]
[ 0.178244] pci 0000:02:0a.0: bridge window [mem 0xfc600000-0xfc6fffff]
[ 0.178327] pci 0000:0d:00.0: [10de:21c4] type 00 class 0x030000
[ 0.178341] pci 0000:0d:00.0: reg 0x10: [mem 0xfb000000-0xfbffffff]
[ 0.178353] pci 0000:0d:00.0: reg 0x14: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.178366] pci 0000:0d:00.0: reg 0x1c: [mem 0xe0000000-0xe1ffffff 64bit pref]
[ 0.178374] pci 0000:0d:00.0: reg 0x24: [io 0xf000-0xf07f]
[ 0.178382] pci 0000:0d:00.0: reg 0x30: [mem 0xfc000000-0xfc07ffff pref]
[ 0.178400] pci 0000:0d:00.0: BAR 1: assigned to efifb
[ 0.178451] pci 0000:0d:00.0: PME# supported from D0 D3hot D3cold
[ 0.178529] pci 0000:0d:00.0: 32.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s PCIe x16 link at 0000:00:03.1 (capable of 126.016 Gb/s with 8.0 GT/s PCIe x16 link)
[ 0.178563] pci 0000:0d:00.1: [10de:1aeb] type 00 class 0x040300
[ 0.178575] pci 0000:0d:00.1: reg 0x10: [mem 0xfc080000-0xfc083fff]
[ 0.178702] pci 0000:0d:00.2: [10de:1aec] type 00 class 0x0c0330
[ 0.178720] pci 0000:0d:00.2: reg 0x10: [mem 0xe2000000-0xe203ffff 64bit pref]
[ 0.178739] pci 0000:0d:00.2: reg 0x1c: [mem 0xe2040000-0xe204ffff 64bit pref]
[ 0.178802] pci 0000:0d:00.2: PME# supported from D0 D3hot D3cold
[ 0.178851] pci 0000:0d:00.3: [10de:1aed] type 00 class 0x0c8000
[ 0.178863] pci 0000:0d:00.3: reg 0x10: [mem 0xfc084000-0xfc084fff]
[ 0.178942] pci 0000:0d:00.3: PME# supported from D0 D3hot D3cold
[ 0.179020] pci 0000:00:03.1: PCI bridge to [bus 0d]
[ 0.179023] pci 0000:00:03.1: bridge window [io 0xf000-0xffff]
[ 0.179025] pci 0000:00:03.1: bridge window [mem 0xfb000000-0xfc0fffff]
[ 0.179029] pci 0000:00:03.1: bridge window [mem 0xd0000000-0xe20fffff 64bit pref]
[ 0.179063] pci 0000:0e:00.0: [1022:148a] type 00 class 0x130000
[ 0.179090] pci 0000:0e:00.0: enabling Extended Tags
[ 0.179194] pci 0000:00:07.1: PCI bridge to [bus 0e]
[ 0.179243] pci 0000:0f:00.0: [1022:1485] type 00 class 0x130000
[ 0.179275] pci 0000:0f:00.0: enabling Extended Tags
[ 0.179382] pci 0000:0f:00.1: [1022:1486] type 00 class 0x108000
[ 0.179397] pci 0000:0f:00.1: reg 0x18: [mem 0xfca00000-0xfcafffff]
[ 0.179409] pci 0000:0f:00.1: reg 0x24: [mem 0xfcb08000-0xfcb09fff]
[ 0.179417] pci 0000:0f:00.1: enabling Extended Tags
[ 0.179513] pci 0000:0f:00.3: [1022:149c] type 00 class 0x0c0330
[ 0.179526] pci 0000:0f:00.3: reg 0x10: [mem 0xfc900000-0xfc9fffff 64bit]
[ 0.179555] pci 0000:0f:00.3: enabling Extended Tags
[ 0.179599] pci 0000:0f:00.3: PME# supported from D0 D3hot D3cold
[ 0.179662] pci 0000:0f:00.4: [1022:1487] type 00 class 0x040300
[ 0.179671] pci 0000:0f:00.4: reg 0x10: [mem 0xfcb00000-0xfcb07fff]
[ 0.179696] pci 0000:0f:00.4: enabling Extended Tags
[ 0.179738] pci 0000:0f:00.4: PME# supported from D0 D3hot D3cold
[ 0.179810] pci 0000:00:08.1: PCI bridge to [bus 0f]
[ 0.179814] pci 0000:00:08.1: bridge window [mem 0xfc900000-0xfcbfffff]
[ 0.180150] ACPI: PCI: Interrupt link LNKA configured for IRQ 0
[ 0.180192] ACPI: PCI: Interrupt link LNKB configured for IRQ 0
[ 0.180228] ACPI: PCI: Interrupt link LNKC configured for IRQ 0
[ 0.180273] ACPI: PCI: Interrupt link LNKD configured for IRQ 0
[ 0.180313] ACPI: PCI: Interrupt link LNKE configured for IRQ 0
[ 0.180346] ACPI: PCI: Interrupt link LNKF configured for IRQ 0
[ 0.180379] ACPI: PCI: Interrupt link LNKG configured for IRQ 0
[ 0.180412] ACPI: PCI: Interrupt link LNKH configured for IRQ 0
[ 0.180837] iommu: Default domain type: Translated
[ 0.180837] iommu: DMA domain TLB invalidation policy: lazy mode
[ 0.180837] SCSI subsystem initialized
[ 0.180837] libata version 3.00 loaded.
[ 0.180837] ACPI: bus type USB registered
[ 0.180837] usbcore: registered new interface driver usbfs
[ 0.180837] usbcore: registered new interface driver hub
[ 0.180837] usbcore: registered new device driver usb
[ 0.180837] pps_core: LinuxPPS API ver. 1 registered
[ 0.180837] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.180837] PTP clock support registered
[ 0.180837] EDAC MC: Ver: 3.0.0
[ 0.180837] Registered efivars operations
[ 0.180837] NetLabel: Initializing
[ 0.180837] NetLabel: domain hash size = 128
[ 0.180837] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.180837] NetLabel: unlabeled traffic allowed by default
[ 0.180837] mctp: management component transport protocol core
[ 0.180837] NET: Registered PF_MCTP protocol family
[ 0.180837] PCI: Using ACPI for IRQ routing
[ 0.185126] PCI: pci_cache_line_size set to 64 bytes
[ 0.185251] e820: reserve RAM buffer [mem 0x09aff000-0x0bffffff]
[ 0.185252] e820: reserve RAM buffer [mem 0x0a200000-0x0bffffff]
[ 0.185252] e820: reserve RAM buffer [mem 0xc5966018-0xc7ffffff]
[ 0.185253] e820: reserve RAM buffer [mem 0xc5987018-0xc7ffffff]
[ 0.185254] e820: reserve RAM buffer [mem 0xc5a6b000-0xc7ffffff]
[ 0.185255] e820: reserve RAM buffer [mem 0xc781d000-0xc7ffffff]
[ 0.185255] e820: reserve RAM buffer [mem 0xc78d6000-0xc7ffffff]
[ 0.185256] e820: reserve RAM buffer [mem 0xcb61b000-0xcbffffff]
[ 0.185256] e820: reserve RAM buffer [mem 0xcf000000-0xcfffffff]
[ 0.185257] e820: reserve RAM buffer [mem 0x42f380000-0x42fffffff]
[ 0.185263] pci 0000:0d:00.0: vgaarb: setting as boot VGA device
[ 0.185263] pci 0000:0d:00.0: vgaarb: bridge control possible
[ 0.185263] pci 0000:0d:00.0: vgaarb: VGA device added: decodes=io+mem,owns=none,locks=none
[ 0.185263] vgaarb: loaded
[ 0.185263] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.185263] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[ 0.186413] clocksource: Switched to clocksource tsc-early
[ 0.190187] VFS: Disk quotas dquot_6.6.0
[ 0.190198] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.190265] AppArmor: AppArmor Filesystem Enabled
[ 0.190285] pnp: PnP ACPI init
[ 0.190363] system 00:00: [mem 0xf0000000-0xf7ffffff] has been reserved
[ 0.190385] system 00:01: [mem 0xfeb80000-0xfebfffff] has been reserved
[ 0.190442] system 00:02: [mem 0xfd200000-0xfd2fffff] has been reserved
[ 0.190613] system 00:04: [io 0x0280-0x028f] has been reserved
[ 0.190615] system 00:04: [io 0x0290-0x029f] has been reserved
[ 0.190616] system 00:04: [io 0x02a0-0x02af] has been reserved
[ 0.190616] system 00:04: [io 0x02b0-0x02bf] has been reserved
[ 0.190815] pnp 00:05: [dma 0 disabled]
[ 0.191025] system 00:06: [io 0x04d0-0x04d1] has been reserved
[ 0.191026] system 00:06: [io 0x040b] has been reserved
[ 0.191027] system 00:06: [io 0x04d6] has been reserved
[ 0.191028] system 00:06: [io 0x0c00-0x0c01] has been reserved
[ 0.191029] system 00:06: [io 0x0c14] has been reserved
[ 0.191029] system 00:06: [io 0x0c50-0x0c51] has been reserved
[ 0.191030] system 00:06: [io 0x0c52] has been reserved
[ 0.191031] system 00:06: [io 0x0c6c] has been reserved
[ 0.191032] system 00:06: [io 0x0c6f] has been reserved
[ 0.191032] system 00:06: [io 0x0cd0-0x0cd1] has been reserved
[ 0.191033] system 00:06: [io 0x0cd2-0x0cd3] has been reserved
[ 0.191034] system 00:06: [io 0x0cd4-0x0cd5] has been reserved
[ 0.191035] system 00:06: [io 0x0cd6-0x0cd7] has been reserved
[ 0.191036] system 00:06: [io 0x0cd8-0x0cdf] has been reserved
[ 0.191036] system 00:06: [io 0x0800-0x089f] has been reserved
[ 0.191038] system 00:06: [io 0x0b00-0x0b0f] has been reserved
[ 0.191039] system 00:06: [io 0x0b20-0x0b3f] has been reserved
[ 0.191039] system 00:06: [io 0x0900-0x090f] has been reserved
[ 0.191040] system 00:06: [io 0x0910-0x091f] has been reserved
[ 0.191041] system 00:06: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.191042] system 00:06: [mem 0xfec01000-0xfec01fff] could not be reserved
[ 0.191043] system 00:06: [mem 0xfedc0000-0xfedc0fff] has been reserved
[ 0.191044] system 00:06: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.191045] system 00:06: [mem 0xfed80000-0xfed8ffff] could not be reserved
[ 0.191046] system 00:06: [mem 0xfec10000-0xfec10fff] has been reserved
[ 0.191047] system 00:06: [mem 0xff000000-0xffffffff] has been reserved
[ 0.191436] pnp: PnP ACPI: found 7 devices
[ 0.196822] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.196861] NET: Registered PF_INET protocol family
[ 0.197017] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[ 0.197968] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes, linear)
[ 0.198066] TCP established hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[ 0.198223] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear)
[ 0.198284] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.198365] MPTCP token hash table entries: 16384 (order: 6, 393216 bytes, linear)
[ 0.198401] UDP hash table entries: 8192 (order: 6, 262144 bytes, linear)
[ 0.198434] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes, linear)
[ 0.198481] NET: Registered PF_UNIX/PF_LOCAL protocol family
[ 0.198484] NET: Registered PF_XDP protocol family
[ 0.198496] pci 0000:04:01.0: PCI bridge to [bus 05]
[ 0.198503] pci 0000:04:01.0: bridge window [mem 0xfc500000-0xfc5fffff]
[ 0.198515] pci 0000:04:03.0: PCI bridge to [bus 06]
[ 0.198532] pci 0000:04:05.0: PCI bridge to [bus 07]
[ 0.198535] pci 0000:04:05.0: bridge window [io 0xe000-0xefff]
[ 0.198540] pci 0000:04:05.0: bridge window [mem 0xfc400000-0xfc4fffff]
[ 0.198552] pci 0000:04:07.0: PCI bridge to [bus 08]
[ 0.198568] pci 0000:03:00.0: PCI bridge to [bus 04-08]
[ 0.198570] pci 0000:03:00.0: bridge window [io 0xe000-0xefff]
[ 0.198576] pci 0000:03:00.0: bridge window [mem 0xfc400000-0xfc5fffff]
[ 0.198587] pci 0000:02:03.0: PCI bridge to [bus 03-08]
[ 0.198589] pci 0000:02:03.0: bridge window [io 0xe000-0xefff]
[ 0.198594] pci 0000:02:03.0: bridge window [mem 0xfc400000-0xfc5fffff]
[ 0.198603] pci 0000:02:05.0: PCI bridge to [bus 09]
[ 0.198605] pci 0000:02:05.0: bridge window [io 0xd000-0xdfff]
[ 0.198609] pci 0000:02:05.0: bridge window [mem 0xfc800000-0xfc8fffff]
[ 0.198618] pci 0000:02:08.0: PCI bridge to [bus 0a]
[ 0.198623] pci 0000:02:08.0: bridge window [mem 0xfc200000-0xfc3fffff]
[ 0.198632] pci 0000:02:09.0: PCI bridge to [bus 0b]
[ 0.198636] pci 0000:02:09.0: bridge window [mem 0xfc700000-0xfc7fffff]
[ 0.198645] pci 0000:02:0a.0: PCI bridge to [bus 0c]
[ 0.198650] pci 0000:02:0a.0: bridge window [mem 0xfc600000-0xfc6fffff]
[ 0.198659] pci 0000:01:00.0: PCI bridge to [bus 02-0c]
[ 0.198660] pci 0000:01:00.0: bridge window [io 0xd000-0xefff]
[ 0.198665] pci 0000:01:00.0: bridge window [mem 0xfc200000-0xfc8fffff]
[ 0.198674] pci 0000:00:01.2: PCI bridge to [bus 01-0c]
[ 0.198676] pci 0000:00:01.2: bridge window [io 0xd000-0xefff]
[ 0.198679] pci 0000:00:01.2: bridge window [mem 0xfc200000-0xfc8fffff]
[ 0.198683] pci 0000:00:03.1: PCI bridge to [bus 0d]
[ 0.198684] pci 0000:00:03.1: bridge window [io 0xf000-0xffff]
[ 0.198687] pci 0000:00:03.1: bridge window [mem 0xfb000000-0xfc0fffff]
[ 0.198689] pci 0000:00:03.1: bridge window [mem 0xd0000000-0xe20fffff 64bit pref]
[ 0.198693] pci 0000:00:07.1: PCI bridge to [bus 0e]
[ 0.198699] pci 0000:00:08.1: PCI bridge to [bus 0f]
[ 0.198701] pci 0000:00:08.1: bridge window [mem 0xfc900000-0xfcbfffff]
[ 0.198705] pci_bus 0000:00: resource 4 [io 0x0000-0x03af window]
[ 0.198706] pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7 window]
[ 0.198707] pci_bus 0000:00: resource 6 [io 0x03b0-0x03df window]
[ 0.198708] pci_bus 0000:00: resource 7 [io 0x0d00-0xffff window]
[ 0.198709] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000dffff window]
[ 0.198710] pci_bus 0000:00: resource 9 [mem 0xd0000000-0xfec02fff window]
[ 0.198710] pci_bus 0000:00: resource 10 [mem 0xfee00000-0xffffffff window]
[ 0.198711] pci_bus 0000:01: resource 0 [io 0xd000-0xefff]
[ 0.198712] pci_bus 0000:01: resource 1 [mem 0xfc200000-0xfc8fffff]
[ 0.198713] pci_bus 0000:02: resource 0 [io 0xd000-0xefff]
[ 0.198713] pci_bus 0000:02: resource 1 [mem 0xfc200000-0xfc8fffff]
[ 0.198714] pci_bus 0000:03: resource 0 [io 0xe000-0xefff]
[ 0.198715] pci_bus 0000:03: resource 1 [mem 0xfc400000-0xfc5fffff]
[ 0.198716] pci_bus 0000:04: resource 0 [io 0xe000-0xefff]
[ 0.198717] pci_bus 0000:04: resource 1 [mem 0xfc400000-0xfc5fffff]
[ 0.198718] pci_bus 0000:05: resource 1 [mem 0xfc500000-0xfc5fffff]
[ 0.198718] pci_bus 0000:07: resource 0 [io 0xe000-0xefff]
[ 0.198719] pci_bus 0000:07: resource 1 [mem 0xfc400000-0xfc4fffff]
[ 0.198720] pci_bus 0000:09: resource 0 [io 0xd000-0xdfff]
[ 0.198721] pci_bus 0000:09: resource 1 [mem 0xfc800000-0xfc8fffff]
[ 0.198722] pci_bus 0000:0a: resource 1 [mem 0xfc200000-0xfc3fffff]
[ 0.198723] pci_bus 0000:0b: resource 1 [mem 0xfc700000-0xfc7fffff]
[ 0.198723] pci_bus 0000:0c: resource 1 [mem 0xfc600000-0xfc6fffff]
[ 0.198724] pci_bus 0000:0d: resource 0 [io 0xf000-0xffff]
[ 0.198725] pci_bus 0000:0d: resource 1 [mem 0xfb000000-0xfc0fffff]
[ 0.198726] pci_bus 0000:0d: resource 2 [mem 0xd0000000-0xe20fffff 64bit pref]
[ 0.198727] pci_bus 0000:0f: resource 1 [mem 0xfc900000-0xfcbfffff]
[ 0.199138] pci 0000:0d:00.1: D0 power state depends on 0000:0d:00.0
[ 0.199191] pci 0000:0d:00.2: D0 power state depends on 0000:0d:00.0
[ 0.199301] pci 0000:0d:00.3: D0 power state depends on 0000:0d:00.0
[ 0.199417] PCI: CLS 64 bytes, default 64
[ 0.199422] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.199422] software IO TLB: mapped [mem 0x00000000c1966000-0x00000000c5966000] (64MB)
[ 0.199453] LVT offset 0 assigned for vector 0x400
[ 0.199464] Trying to unpack rootfs image as initramfs...
[ 0.211758] perf: AMD IBS detected (0x000003ff)
[ 0.212229] Initialise system trusted keyrings
[ 0.212237] Key type blacklist registered
[ 0.212302] workingset: timestamp_bits=36 max_order=22 bucket_order=0
[ 0.213027] zbud: loaded
[ 0.213203] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.213293] fuse: init (API version 7.36)
[ 0.213391] integrity: Platform Keyring initialized
[ 0.213393] integrity: Machine keyring initialized
[ 0.215706] Key type asymmetric registered
[ 0.215706] Asymmetric key parser 'x509' registered
[ 0.375598] Freeing initrd memory: 127280K
[ 0.377449] alg: self-tests for CTR-KDF (hmac(sha256)) passed
[ 0.377466] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 243)
[ 0.377499] io scheduler mq-deadline registered
[ 0.378940] pcieport 0000:00:01.2: PME: Signaling with IRQ 26
[ 0.379020] pcieport 0000:00:01.2: AER: enabled with IRQ 26
[ 0.379113] pcieport 0000:00:03.1: PME: Signaling with IRQ 27
[ 0.379163] pcieport 0000:00:03.1: AER: enabled with IRQ 27
[ 0.379316] pcieport 0000:00:07.1: PME: Signaling with IRQ 29
[ 0.379369] pcieport 0000:00:07.1: AER: enabled with IRQ 29
[ 0.379446] pcieport 0000:00:08.1: PME: Signaling with IRQ 30
[ 0.379496] pcieport 0000:00:08.1: AER: enabled with IRQ 30
[ 0.381505] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 0.381602] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 0.381614] ACPI: button: Power Button [PWRB]
[ 0.381631] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 0.381654] ACPI: button: Power Button [PWRF]
[ 0.383794] smpboot: Estimated ratio of average max frequency by base frequency (times 1024): 1106
[ 0.383802] Monitor-Mwait will be used to enter C-1 state
[ 0.383806] ACPI: \_PR_.C000: Found 2 idle states
[ 0.383868] ACPI: \_PR_.C002: Found 2 idle states
[ 0.383966] ACPI: \_PR_.C004: Found 2 idle states
[ 0.384065] ACPI: \_PR_.C006: Found 2 idle states
[ 0.384164] ACPI: \_PR_.C008: Found 2 idle states
[ 0.384258] ACPI: \_PR_.C00A: Found 2 idle states
[ 0.384340] ACPI: \_PR_.C001: Found 2 idle states
[ 0.384398] ACPI: \_PR_.C003: Found 2 idle states
[ 0.384484] ACPI: \_PR_.C005: Found 2 idle states
[ 0.384576] ACPI: \_PR_.C007: Found 2 idle states
[ 0.384668] ACPI: \_PR_.C009: Found 2 idle states
[ 0.384755] ACPI: \_PR_.C00B: Found 2 idle states
[ 0.384937] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 0.405476] 00:05: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 0.407011] Linux agpgart interface v0.103
[ 0.409475] loop: module loaded
[ 0.409607] tun: Universal TUN/TAP device driver, 1.6
[ 0.409636] PPP generic driver version 2.4.2
[ 0.409668] VFIO - User Level meta-driver version: 0.3
[ 0.409704] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.409705] ehci-pci: EHCI PCI platform driver
[ 0.409711] ehci-platform: EHCI generic platform driver
[ 0.409714] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.409715] ohci-pci: OHCI PCI platform driver
[ 0.409720] ohci-platform: OHCI generic platform driver
[ 0.409723] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.409742] i8042: PNP: No PS/2 controller found.
[ 0.409768] mousedev: PS/2 mouse device common for all mice
[ 0.409823] rtc_cmos 00:03: RTC can wake from S4
[ 0.409987] rtc_cmos 00:03: registered as rtc0
[ 0.410014] rtc_cmos 00:03: setting system clock to 2022-05-27T09:54:17 UTC (1653645257)
[ 0.410022] rtc_cmos 00:03: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 0.410026] i2c_dev: i2c /dev entries driver
[ 0.410035] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log.
[ 0.410047] device-mapper: uevent: version 1.0.3
[ 0.410071] device-mapper: ioctl: 4.46.0-ioctl (2022-02-22) initialised: dm-devel@redhat.com
[ 0.410079] platform eisa.0: Probing EISA bus 0
[ 0.410080] platform eisa.0: EISA: Cannot allocate resource for mainboard
[ 0.410081] platform eisa.0: Cannot allocate resource for EISA slot 1
[ 0.410082] platform eisa.0: Cannot allocate resource for EISA slot 2
[ 0.410082] platform eisa.0: Cannot allocate resource for EISA slot 3
[ 0.410083] platform eisa.0: Cannot allocate resource for EISA slot 4
[ 0.410083] platform eisa.0: Cannot allocate resource for EISA slot 5
[ 0.410084] platform eisa.0: Cannot allocate resource for EISA slot 6
[ 0.410085] platform eisa.0: Cannot allocate resource for EISA slot 7
[ 0.410085] platform eisa.0: Cannot allocate resource for EISA slot 8
[ 0.410086] platform eisa.0: EISA: Detected 0 cards
[ 0.410539] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.410549] efifb: probing for efifb
[ 0.410589] efifb: showing boot graphics
[ 0.412916] efifb: framebuffer at 0xd0000000, using 8400k, total 8400k
[ 0.412917] efifb: mode is 1680x1050x32, linelength=8192, pages=1
[ 0.412918] efifb: scrolling: redraw
[ 0.412918] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.412957] fbcon: Deferring console take-over
[ 0.412958] fb0: EFI VGA frame buffer device
[ 0.412961] EFI Variables Facility v0.08 2004-May-17
[ 0.413847] drop_monitor: Initializing network drop monitor service
[ 0.424141] IPv6: Loaded, but administratively disabled, reboot required to enable
[ 0.424142] NET: Registered PF_PACKET protocol family
[ 0.424181] Key type dns_resolver registered
[ 0.424917] microcode: CPU0: patch_level=0x08701021
[ 0.424920] microcode: CPU1: patch_level=0x08701021
[ 0.424933] microcode: CPU2: patch_level=0x08701021
[ 0.424949] microcode: CPU3: patch_level=0x08701021
[ 0.424965] microcode: CPU4: patch_level=0x08701021
[ 0.424981] microcode: CPU5: patch_level=0x08701021
[ 0.424987] microcode: CPU6: patch_level=0x08701021
[ 0.424991] microcode: CPU7: patch_level=0x08701021
[ 0.424996] microcode: CPU8: patch_level=0x08701021
[ 0.425002] microcode: CPU9: patch_level=0x08701021
[ 0.425007] microcode: CPU10: patch_level=0x08701021
[ 0.425013] microcode: CPU11: patch_level=0x08701021
[ 0.425035] microcode: Microcode Update Driver: v2.2.
[ 0.425139] resctrl: L3 allocation detected
[ 0.425140] resctrl: MB allocation detected
[ 0.425140] resctrl: L3 monitoring detected
[ 0.425142] IPI shorthand broadcast: enabled
[ 0.425146] sched_clock: Marking stable (453127042, -27995520)->(430366584, -5235062)
[ 0.425410] registered taskstats version 1
[ 0.425527] Loading compiled-in X.509 certificates
[ 0.425953] Loaded X.509 cert 'Build time autogenerated kernel key: 9f39f1a9a84b110de589941f1b818eb21eb7a201'
[ 0.426280] Loaded X.509 cert 'Canonical Ltd. Live Patch Signing: 14df34d1a87cf37625abec039ef2bf521249b969'
[ 0.426603] Loaded X.509 cert 'Canonical Ltd. Kernel Module Signing: 88f752e560a1e0737e31163a466ad7b70a850c19'
[ 0.426604] blacklist: Loading compiled-in revocation X.509 certificates
[ 0.426615] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing: 61482aa2830d0ab2ad5af10b7250da9033ddcef0'
[ 0.427238] zswap: loaded using pool lzo/zbud
[ 0.427340] Key type ._fscrypt registered
[ 0.427340] Key type .fscrypt registered
[ 0.427341] Key type fscrypt-provisioning registered
[ 0.429192] Key type encrypted registered
[ 0.429193] AppArmor: AppArmor sha1 policy hashing enabled
[ 0.429248] ima: No TPM chip found, activating TPM-bypass!
[ 0.429249] Loading compiled-in module X.509 certificates
[ 0.429597] Loaded X.509 cert 'Build time autogenerated kernel key: 9f39f1a9a84b110de589941f1b818eb21eb7a201'
[ 0.429598] ima: Allocated hash algorithm: sha1
[ 0.429602] ima: No architecture policies found
[ 0.429607] evm: Initialising EVM extended attributes:
[ 0.429608] evm: security.selinux
[ 0.429608] evm: security.SMACK64
[ 0.429609] evm: security.SMACK64EXEC
[ 0.429609] evm: security.SMACK64TRANSMUTE
[ 0.429609] evm: security.SMACK64MMAP
[ 0.429610] evm: security.apparmor
[ 0.429610] evm: security.ima
[ 0.429610] evm: security.capability
[ 0.429611] evm: HMAC attrs: 0x1
[ 0.430473] PM: Magic number: 6:866:930
[ 0.430781] acpi_cpufreq: overriding BIOS provided _PSD data
[ 0.475453] RAS: Correctable Errors collector initialized.
[ 0.476890] Freeing unused decrypted memory: 2036K
[ 0.477199] Freeing unused kernel image (initmem) memory: 2764K
[ 0.479409] Write protecting the kernel read-only data: 30720k
[ 0.480121] Freeing unused kernel image (text/rodata gap) memory: 2036K
[ 0.480318] Freeing unused kernel image (rodata/data gap) memory: 1312K
[ 0.510496] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 0.510505] Run /init as init process
[ 0.510506] with arguments:
[ 0.510507] /init
[ 0.510508] splash
[ 0.510508] with environment:
[ 0.510508] HOME=/
[ 0.510509] TERM=linux
[ 0.510509] BOOT_IMAGE=/vmlinuz-5.18.0-051800-generic
[ 0.557187] dca service started, version 1.12.1
[ 0.558312] xhci_hcd 0000:0a:00.1: xHCI Host Controller
[ 0.558318] xhci_hcd 0000:0a:00.1: new USB bus registered, assigned bus number 1
[ 0.558484] xhci_hcd 0000:0a:00.1: hcc params 0x0278ffe5 hci version 0x110 quirks 0x0000000000000410
[ 0.558521] ahci 0000:0b:00.0: version 3.0
[ 0.558982] nvidia-gpu 0000:0d:00.3: enabling device (0000 -> 0002)
[ 0.559049] ahci 0000:0b:00.0: AHCI 0001.0301 32 slots 2 ports 6 Gbps 0x9 impl SATA mode
[ 0.559052] ahci 0000:0b:00.0: flags: 64bit ncq sntf ilck pm led clo only pmp fbs pio slum part
[ 0.559120] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.18
[ 0.559123] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.559125] usb usb1: Product: xHCI Host Controller
[ 0.559126] usb usb1: Manufacturer: Linux 5.18.0-051800-generic xhci-hcd
[ 0.559127] usb usb1: SerialNumber: 0000:0a:00.1
[ 0.559433] hub 1-0:1.0: USB hub found
[ 0.559447] hub 1-0:1.0: 6 ports detected
[ 0.559585] scsi host0: ahci
[ 0.559809] xhci_hcd 0000:0a:00.1: xHCI Host Controller
[ 0.559813] xhci_hcd 0000:0a:00.1: new USB bus registered, assigned bus number 2
[ 0.559815] xhci_hcd 0000:0a:00.1: Host supports USB 3.1 Enhanced SuperSpeed
[ 0.559816] scsi host1: ahci
[ 0.559837] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[ 0.559855] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.18
[ 0.559858] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.559859] usb usb2: Product: xHCI Host Controller
[ 0.559860] usb usb2: Manufacturer: Linux 5.18.0-051800-generic xhci-hcd
[ 0.559861] usb usb2: SerialNumber: 0000:0a:00.1
[ 0.559918] scsi host2: ahci
[ 0.559933] hub 2-0:1.0: USB hub found
[ 0.559942] hub 2-0:1.0: 4 ports detected
[ 0.560008] scsi host3: ahci
[ 0.560051] ata1: SATA max UDMA/133 abar m2048@0xfc700000 port 0xfc700100 irq 45
[ 0.560053] ata2: DUMMY
[ 0.560054] ata3: DUMMY
[ 0.560057] ata4: SATA max UDMA/133 abar m2048@0xfc700000 port 0xfc700280 irq 45
[ 0.560157] xhci_hcd 0000:0a:00.3: xHCI Host Controller
[ 0.560160] xhci_hcd 0000:0a:00.3: new USB bus registered, assigned bus number 3
[ 0.560234] ahci 0000:0c:00.0: AHCI 0001.0301 32 slots 2 ports 6 Gbps 0x11 impl SATA mode
[ 0.560237] ahci 0000:0c:00.0: flags: 64bit ncq sntf ilck pm led clo only pmp fbs pio slum part
[ 0.560317] xhci_hcd 0000:0a:00.3: hcc params 0x0278ffe5 hci version 0x110 quirks 0x0000000000000410
[ 0.560587] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
[ 0.560589] piix4_smbus 0000:00:14.0: Using register 0x02 for SMBus port selection
[ 0.560622] scsi host4: ahci
[ 0.560626] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.18
[ 0.560629] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.560630] usb usb3: Product: xHCI Host Controller
[ 0.560631] usb usb3: Manufacturer: Linux 5.18.0-051800-generic xhci-hcd
[ 0.560632] usb usb3: SerialNumber: 0000:0a:00.3
[ 0.560727] piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xb20
[ 0.560804] hub 3-0:1.0: USB hub found
[ 0.560818] hub 3-0:1.0: 6 ports detected
[ 0.560909] scsi host5: ahci
[ 0.560997] scsi host6: ahci
[ 0.561060] xhci_hcd 0000:0a:00.3: xHCI Host Controller
[ 0.561063] xhci_hcd 0000:0a:00.3: new USB bus registered, assigned bus number 4
[ 0.561065] xhci_hcd 0000:0a:00.3: Host supports USB 3.1 Enhanced SuperSpeed
[ 0.561091] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[ 0.561107] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.18
[ 0.561109] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.561111] usb usb4: Product: xHCI Host Controller
[ 0.561112] usb usb4: Manufacturer: Linux 5.18.0-051800-generic xhci-hcd
[ 0.561113] usb usb4: SerialNumber: 0000:0a:00.3
[ 0.561213] scsi host7: ahci
[ 0.561241] hub 4-0:1.0: USB hub found
[ 0.561252] hub 4-0:1.0: 4 ports detected
[ 0.561295] usb: port power management may be unreliable
[ 0.561337] scsi host8: ahci
[ 0.561372] ata5: SATA max UDMA/133 abar m2048@0xfc600000 port 0xfc600100 irq 48
[ 0.561373] ata6: DUMMY
[ 0.561373] ata7: DUMMY
[ 0.561374] ata8: DUMMY
[ 0.561377] ata9: SATA max UDMA/133 abar m2048@0xfc600000 port 0xfc600300 irq 48
[ 0.561550] e1000e: Intel(R) PRO/1000 Network Driver
[ 0.561551] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[ 0.561572] xhci_hcd 0000:0d:00.2: xHCI Host Controller
[ 0.561575] xhci_hcd 0000:0d:00.2: new USB bus registered, assigned bus number 5
[ 0.561582] e1000e 0000:09:00.0: enabling device (0000 -> 0002)
[ 0.561740] e1000e 0000:09:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[ 0.562171] xhci_hcd 0000:0d:00.2: hcc params 0x0180ff05 hci version 0x110 quirks 0x0000000000000010
[ 0.562184] igb: Intel(R) Gigabit Ethernet Network Driver
[ 0.562186] igb: Copyright (c) 2007-2014 Intel Corporation.
[ 0.562318] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.18
[ 0.562320] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.562320] usb usb5: Product: xHCI Host Controller
[ 0.562321] usb usb5: Manufacturer: Linux 5.18.0-051800-generic xhci-hcd
[ 0.562322] usb usb5: SerialNumber: 0000:0d:00.2
[ 0.562377] hub 5-0:1.0: USB hub found
[ 0.562383] hub 5-0:1.0: 2 ports detected
[ 0.562459] xhci_hcd 0000:0d:00.2: xHCI Host Controller
[ 0.562461] xhci_hcd 0000:0d:00.2: new USB bus registered, assigned bus number 6
[ 0.562463] xhci_hcd 0000:0d:00.2: Host supports USB 3.1 Enhanced SuperSpeed
[ 0.562480] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.
[ 0.562491] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.18
[ 0.562492] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.562493] usb usb6: Product: xHCI Host Controller
[ 0.562493] usb usb6: Manufacturer: Linux 5.18.0-051800-generic xhci-hcd
[ 0.562494] usb usb6: SerialNumber: 0000:0d:00.2
[ 0.562552] hub 6-0:1.0: USB hub found
[ 0.562560] hub 6-0:1.0: 4 ports detected
[ 0.562749] xhci_hcd 0000:0f:00.3: xHCI Host Controller
[ 0.562753] xhci_hcd 0000:0f:00.3: new USB bus registered, assigned bus number 7
[ 0.562855] xhci_hcd 0000:0f:00.3: hcc params 0x0278ffe5 hci version 0x110 quirks 0x0000000000000410
[ 0.563054] usb usb7: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.18
[ 0.563056] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.563057] usb usb7: Product: xHCI Host Controller
[ 0.563057] usb usb7: Manufacturer: Linux 5.18.0-051800-generic xhci-hcd
[ 0.563058] usb usb7: SerialNumber: 0000:0f:00.3
[ 0.563117] hub 7-0:1.0: USB hub found
[ 0.563124] hub 7-0:1.0: 4 ports detected
[ 0.563231] xhci_hcd 0000:0f:00.3: xHCI Host Controller
[ 0.563233] xhci_hcd 0000:0f:00.3: new USB bus registered, assigned bus number 8
[ 0.563235] xhci_hcd 0000:0f:00.3: Host supports USB 3.1 Enhanced SuperSpeed
[ 0.563247] usb usb8: We don't know the algorithms for LPM for this host, disabling LPM.
[ 0.563258] usb usb8: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.18
[ 0.563259] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.563260] usb usb8: Product: xHCI Host Controller
[ 0.563260] usb usb8: Manufacturer: Linux 5.18.0-051800-generic xhci-hcd
[ 0.563261] usb usb8: SerialNumber: 0000:0f:00.3
[ 0.563313] hub 8-0:1.0: USB hub found
[ 0.563319] hub 8-0:1.0: 4 ports detected
[ 0.564620] cryptd: max_cpu_qlen set to 1000
[ 0.567929] AVX2 version of gcm_enc/dec engaged.
[ 0.567959] AES CTR mode by8 optimization enabled
[ 0.597975] pps pps0: new PPS source ptp0
[ 0.597999] igb 0000:07:00.0: added PHC on eth0
[ 0.598000] igb 0000:07:00.0: Intel(R) Gigabit Ethernet Network Connection
[ 0.598001] igb 0000:07:00.0: eth0: (PCIe:2.5Gb/s:Width x1) 70:85:c2:f0:45:d9
[ 0.598003] igb 0000:07:00.0: eth0: PBA No: FFFFFF-0FF
[ 0.598004] igb 0000:07:00.0: Using MSI-X interrupts. 2 rx queue(s), 2 tx queue(s)
[ 0.624386] e1000e 0000:09:00.0 0000:09:00.0 (uninitialized): registered PHC clock
[ 0.688318] e1000e 0000:09:00.0 eth1: (PCI Express:2.5GT/s:Width x1) 68:05:ca:0c:63:13
[ 0.688321] e1000e 0000:09:00.0 eth1: Intel(R) PRO/1000 Network Connection
[ 0.688336] e1000e 0000:09:00.0 eth1: MAC: 3, PHY: 8, PBA No: E46981-007
[ 0.814258] usb 1-1: new full-speed USB device number 2 using xhci_hcd
[ 0.818257] usb 3-4: new high-speed USB device number 2 using xhci_hcd
[ 0.818262] usb 7-3: new low-speed USB device number 2 using xhci_hcd
[ 0.971471] usb 3-4: New USB device found, idVendor=04a9, idProduct=1748, bcdDevice= 0.04
[ 0.971474] usb 3-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 0.971475] usb 3-4: Product: MG5100 series
[ 0.971476] usb 3-4: Manufacturer: Canon
[ 0.971477] usb 3-4: SerialNumber: 25E702
[ 0.984865] usb 1-1: New USB device found, idVendor=046d, idProduct=c52b, bcdDevice=12.11
[ 0.984867] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 0.984868] usb 1-1: Product: USB Receiver
[ 0.984869] usb 1-1: Manufacturer: Logitech
[ 0.993336] usb 7-3: New USB device found, idVendor=060b, idProduct=2312, bcdDevice= 1.70
[ 0.993338] usb 7-3: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[ 0.993339] usb 7-3: Product: Gaming Keyboard
[ 1.020578] usb-storage 3-4:1.2: USB Mass Storage device detected
[ 1.020662] hid: raw HID events driver (C) Jiri Kosina
[ 1.020663] scsi host9: usb-storage 3-4:1.2
[ 1.020728] usbcore: registered new interface driver usb-storage
[ 1.040032] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.043657] ata1.00: ATAPI: PIONEER BD-RW BDR-207M, 1.60, max UDMA/100
[ 1.044028] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.044029] ata9: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.044053] ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.044492] ata9.00: ATA-10: WDC WD40EFRX-68N32N0, 82.00A82, max UDMA/133
[ 1.044786] ata5.00: supports DRM functions and may not be fully accessible
[ 1.044787] ata5.00: ATA-10: CT1000MX500SSD1, M3CR032, max UDMA/133
[ 1.044813] ata5.00: 1953525168 sectors, multi 1: LBA48 NCQ (depth 32), AA
[ 1.045028] ata9.00: 7814037168 sectors, multi 16: LBA48 NCQ (depth 32), AA
[ 1.045546] ata5.00: Features: Trust Dev-Sleep
[ 1.045648] ata5.00: supports DRM functions and may not be fully accessible
[ 1.046056] ata9.00: configured for UDMA/133
[ 1.046378] ata5.00: configured for UDMA/133
[ 1.047015] ata4.00: ATA-8: WDC WD20EADS-00W4B0, 01.00A01, max UDMA/133
[ 1.047251] ata4.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 32), AA
[ 1.047484] ata1.00: configured for UDMA/100
[ 1.049551] ata4.00: configured for UDMA/133
[ 1.057988] scsi 0:0:0:0: CD-ROM PIONEER BD-RW BDR-207M 1.60 PQ: 0 ANSI: 5
[ 1.090956] usbcore: registered new interface driver usbhid
[ 1.090959] usbhid: USB HID core driver
[ 1.144014] usb 1-2: new high-speed USB device number 3 using xhci_hcd
[ 1.144021] usb 3-5: new high-speed USB device number 3 using xhci_hcd
[ 1.156071] sr 0:0:0:0: [sr0] scsi3-mmc drive: 125x/125x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.156075] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.188989] sr 0:0:0:0: Attached scsi CD-ROM sr0
[ 1.189036] sr 0:0:0:0: Attached scsi generic sg0 type 5
[ 1.189265] scsi 3:0:0:0: Direct-Access ATA WDC WD20EADS-00W 0A01 PQ: 0 ANSI: 5
[ 1.189406] sd 3:0:0:0: Attached scsi generic sg1 type 0
[ 1.189505] sd 3:0:0:0: [sda] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB)
[ 1.189513] sd 3:0:0:0: [sda] Write Protect is off
[ 1.189517] sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.189530] sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.189568] scsi 4:0:0:0: Direct-Access ATA CT1000MX500SSD1 032 PQ: 0 ANSI: 5
[ 1.189710] sd 4:0:0:0: Attached scsi generic sg2 type 0
[ 1.189824] sd 4:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[ 1.189828] sd 4:0:0:0: [sdb] 4096-byte physical blocks
[ 1.189839] sd 4:0:0:0: [sdb] Write Protect is off
[ 1.189842] sd 4:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 1.189856] sd 4:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.189874] scsi 8:0:0:0: Direct-Access ATA WDC WD40EFRX-68N 0A82 PQ: 0 ANSI: 5
[ 1.189988] sd 8:0:0:0: Attached scsi generic sg3 type 0
[ 1.190109] sd 8:0:0:0: [sdc] 7814037168 512-byte logical blocks: (4.00 TB/3.64 TiB)
[ 1.190113] sd 8:0:0:0: [sdc] 4096-byte physical blocks
[ 1.190122] sd 8:0:0:0: [sdc] Write Protect is off
[ 1.190124] sd 8:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 1.190140] sd 8:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.220018] tsc: Refined TSC clocksource calibration: 3799.935 MHz
[ 1.220026] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x6d8c35d3b02, max_idle_ns: 881590614458 ns
[ 1.220057] clocksource: Switched to clocksource tsc
[ 1.222830] sdb: sdb1 sdb2 sdb3 sdb4 sdb5 sdb6
[ 1.248211] sd 4:0:0:0: [sdb] supports TCG Opal
[ 1.248213] sd 4:0:0:0: [sdb] Attached SCSI disk
[ 1.268043] sdc: sdc1 sdc2
[ 1.292977] usb 3-5: New USB device found, idVendor=0424, idProduct=2514, bcdDevice= b.b3
[ 1.292982] usb 3-5: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.295107] usb 1-2: New USB device found, idVendor=05e3, idProduct=0608, bcdDevice=88.32
[ 1.295111] usb 1-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 1.295113] usb 1-2: Product: USB2.0 Hub
[ 1.300070] sd 8:0:0:0: [sdc] Attached SCSI disk
[ 1.328272] hub 1-2:1.0: USB hub found
[ 1.328861] hub 1-2:1.0: 4 ports detected
[ 1.329254] hub 3-5:1.0: USB hub found
[ 1.329602] hub 3-5:1.0: 4 ports detected
[ 1.620472] usb 1-2.2: new high-speed USB device number 4 using xhci_hcd
[ 1.685252] sda: sda1
[ 1.700528] sd 3:0:0:0: [sda] Attached SCSI disk
[ 1.701960] igb 0000:07:00.0 enp7s0: renamed from eth0
[ 1.702219] usbcore: registered new interface driver uas
[ 1.704189] input: Gaming Keyboard as /devices/pci0000:00/0000:00:08.1/0000:0f:00.3/usb7/7-3/7-3:1.0/0003:060B:2312.0001/input/input2
[ 1.728193] e1000e 0000:09:00.0 enp9s0: renamed from eth1
[ 1.728878] usb 1-2.2: New USB device found, idVendor=05e3, idProduct=0716, bcdDevice=97.44
[ 1.728883] usb 1-2.2: New USB device strings: Mfr=0, Product=1, SerialNumber=2
[ 1.728886] usb 1-2.2: Product: USB Storage
[ 1.728888] usb 1-2.2: SerialNumber: 000000009744
[ 1.729631] usb-storage 1-2.2:1.0: USB Mass Storage device detected
[ 1.729718] scsi host10: usb-storage 1-2.2:1.0
[ 1.764267] hid-generic 0003:060B:2312.0001: input,hidraw0: USB HID v1.11 Keyboard [Gaming Keyboard] on usb-0000:0f:00.3-3/input0
[ 1.764454] input: Gaming Keyboard as /devices/pci0000:00/0000:00:08.1/0000:0f:00.3/usb7/7-3/7-3:1.1/0003:060B:2312.0002/input/input3
[ 1.824163] hid-generic 0003:060B:2312.0002: input,hidraw1: USB HID v1.11 Keyboard [Gaming Keyboard] on usb-0000:0f:00.3-3/input1
[ 1.824343] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:01.2/0000:01:00.0/0000:02:08.0/0000:0a:00.1/usb1/1-1/1-1:1.0/0003:046D:C52B.0003/input/input4
[ 1.884103] hid-generic 0003:046D:C52B.0003: input,hidraw2: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:0a:00.1-1/input0
[ 1.884324] input: Logitech USB Receiver Mouse as /devices/pci0000:00/0000:00:01.2/0000:01:00.0/0000:02:08.0/0000:0a:00.1/usb1/1-1/1-1:1.1/0003:046D:C52B.0004/input/input5
[ 1.884458] input: Logitech USB Receiver Consumer Control as /devices/pci0000:00/0000:00:01.2/0000:01:00.0/0000:02:08.0/0000:0a:00.1/usb1/1-1/1-1:1.1/0003:046D:C52B.0004/input/input6
[ 1.944095] input: Logitech USB Receiver System Control as /devices/pci0000:00/0000:00:01.2/0000:01:00.0/0000:02:08.0/0000:0a:00.1/usb1/1-1/1-1:1.1/0003:046D:C52B.0004/input/input7
[ 1.944189] hid-generic 0003:046D:C52B.0004: input,hiddev0,hidraw3: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:0a:00.1-1/input1
[ 1.944328] hid-generic 0003:046D:C52B.0005: hiddev1,hidraw4: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:0a:00.1-1/input2
[ 2.051129] scsi 9:0:0:0: Direct-Access Canon MG5100 series 0104 PQ: 0 ANSI: 2
[ 2.051342] sd 9:0:0:0: Attached scsi generic sg4 type 0
[ 2.052198] sd 9:0:0:0: Power-on or device reset occurred
[ 2.053042] sd 9:0:0:0: [sdd] Media removed, stopped polling
[ 2.054072] sd 9:0:0:0: [sdd] Attached SCSI removable disk
[ 2.144465] logitech-djreceiver 0003:046D:C52B.0005: hiddev0,hidraw2: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:0a:00.1-1/input2
[ 2.266170] input: Logitech Wireless Device PID:4051 Mouse as /devices/pci0000:00/0000:00:01.2/0000:01:00.0/0000:02:08.0/0000:0a:00.1/usb1/1-1/1-1:1.2/0003:046D:C52B.0005/0003:046D:4051.0006/input/input9
[ 2.266314] hid-generic 0003:046D:4051.0006: input,hidraw3: USB HID v1.11 Mouse [Logitech Wireless Device PID:4051] on usb-0000:0a:00.1-1/input2:1
[ 2.324393] input: Logitech M510 as /devices/pci0000:00/0000:00:01.2/0000:01:00.0/0000:02:08.0/0000:0a:00.1/usb1/1-1/1-1:1.2/0003:046D:C52B.0005/0003:046D:4051.0006/input/input13
[ 2.324515] logitech-hidpp-device 0003:046D:4051.0006: input,hidraw3: USB HID v1.11 Mouse [Logitech M510] on usb-0000:0a:00.1-1/input2:1
[ 2.754423] scsi 10:0:0:0: Direct-Access Generic STORAGE DEVICE 9744 PQ: 0 ANSI: 0
[ 2.755151] scsi 10:0:0:1: Direct-Access Generic STORAGE DEVICE 9744 PQ: 0 ANSI: 0
[ 2.755768] scsi 10:0:0:2: Direct-Access Generic STORAGE DEVICE 9744 PQ: 0 ANSI: 0
[ 2.756432] scsi 10:0:0:3: Direct-Access Generic STORAGE DEVICE 9744 PQ: 0 ANSI: 0
[ 2.757039] scsi 10:0:0:4: Direct-Access Generic STORAGE DEVICE 9744 PQ: 0 ANSI: 0
[ 2.757328] sd 10:0:0:0: Attached scsi generic sg5 type 0
[ 2.757451] sd 10:0:0:1: Attached scsi generic sg6 type 0
[ 2.757562] sd 10:0:0:2: Attached scsi generic sg7 type 0
[ 2.757762] sd 10:0:0:3: Attached scsi generic sg8 type 0
[ 2.757770] sd 10:0:0:0: [sde] Media removed, stopped polling
[ 2.758176] sd 10:0:0:1: [sdf] Media removed, stopped polling
[ 2.758572] sd 10:0:0:2: [sdg] Media removed, stopped polling
[ 2.758937] sd 10:0:0:4: Attached scsi generic sg9 type 0
[ 2.758944] sd 10:0:0:3: [sdh] Media removed, stopped polling
[ 2.759419] sd 10:0:0:4: [sdi] Media removed, stopped polling
[ 2.761001] sd 10:0:0:0: [sde] Attached SCSI removable disk
[ 2.761757] sd 10:0:0:1: [sdf] Attached SCSI removable disk
[ 2.762500] sd 10:0:0:2: [sdg] Attached SCSI removable disk
[ 2.765871] sd 10:0:0:4: [sdi] Attached SCSI removable disk
[ 2.766254] sd 10:0:0:3: [sdh] Attached SCSI removable disk
[ 3.152490] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 3.160383] ata1.00: configured for UDMA/100
[ 5.068007] raid6: avx2x4 gen() 35926 MB/s
[ 5.136008] raid6: avx2x2 gen() 40373 MB/s
[ 5.204021] raid6: avx2x1 gen() 30941 MB/s
[ 5.204021] raid6: using algorithm avx2x2 gen() 40373 MB/s
[ 5.272008] raid6: .... xor() 24482 MB/s, rmw enabled
[ 5.272008] raid6: using avx2x2 recovery algorithm
[ 5.272834] xor: automatically using best checksumming function avx
[ 5.305651] Btrfs loaded, crc32c=crc32c-intel, zoned=yes, fsverity=yes
[ 5.496287] EXT4-fs (sdb4): mounted filesystem with ordered data mode. Quota mode: none.
[ 5.653790] systemd[1]: Inserted module 'autofs4'
[ 5.670992] systemd[1]: systemd 245.4-4ubuntu3.17 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
[ 5.688035] systemd[1]: Detected architecture x86-64.
[ 5.728631] systemd[1]: Set hostname to <Nico>.
[ 6.913977] systemd[1]: Binding to IPv6 address not available since kernel does not support IPv6.
[ 6.913983] systemd[1]: Binding to IPv6 address not available since kernel does not support IPv6.
[ 6.949008] systemd[1]: Created slice system-modprobe.slice.
[ 6.949202] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[ 6.949366] systemd[1]: Created slice User and Session Slice.
[ 6.949393] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 6.949475] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 6.949500] systemd[1]: Reached target NFS client services.
[ 6.949511] systemd[1]: Reached target User and Group Name Lookups.
[ 6.949520] systemd[1]: Reached target Slices.
[ 6.949562] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[ 6.949603] systemd[1]: Listening on LVM2 poll daemon socket.
[ 6.951001] systemd[1]: Listening on RPCbind Server Activation Socket.
[ 6.951111] systemd[1]: Listening on Syslog Socket.
[ 6.951196] systemd[1]: Listening on fsck to fsckd communication Socket.
[ 6.951243] systemd[1]: Listening on initctl Compatibility Named Pipe.
[ 6.951389] systemd[1]: Listening on Journal Audit Socket.
[ 6.951463] systemd[1]: Listening on Journal Socket (/dev/log).
[ 6.951543] systemd[1]: Listening on Journal Socket.
[ 6.951621] systemd[1]: Listening on udev Control Socket.
[ 6.951683] systemd[1]: Listening on udev Kernel Socket.
[ 6.952553] systemd[1]: Mounting Huge Pages File System...
[ 6.953446] systemd[1]: Mounting POSIX Message Queue File System...
[ 6.954286] systemd[1]: Mounting NFSD configuration filesystem...
[ 6.955084] systemd[1]: Mounting Kernel Debug File System...
[ 6.955883] systemd[1]: Mounting Kernel Trace File System...
[ 6.957005] systemd[1]: Starting Journal Service...
[ 6.957882] systemd[1]: Starting Availability of block devices...
[ 6.958807] systemd[1]: Starting Set the console keyboard layout...
[ 6.959578] systemd[1]: Starting Create list of static device nodes for the current kernel...
[ 6.960350] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
[ 6.961026] systemd[1]: Starting Load Kernel Module drm...
[ 6.962340] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
[ 6.962358] systemd[1]: Condition check resulted in File System Check on Root Device being skipped.
[ 6.963264] systemd[1]: Starting Load Kernel Modules...
[ 6.963776] systemd[1]: Starting Remount Root and Kernel File Systems...
[ 6.964266] systemd[1]: Starting udev Coldplug all Devices...
[ 6.964787] systemd[1]: Starting Uncomplicated firewall...
[ 6.965613] systemd[1]: Mounted Huge Pages File System.
[ 6.965706] systemd[1]: Mounted POSIX Message Queue File System.
[ 6.965781] systemd[1]: Mounted Kernel Debug File System.
[ 6.965853] systemd[1]: Mounted Kernel Trace File System.
[ 6.966161] systemd[1]: Finished Availability of block devices.
[ 6.966496] systemd[1]: Finished Create list of static device nodes for the current kernel.
[ 6.970847] EXT4-fs (sdb4): re-mounted. Quota mode: none.
[ 6.971342] ACPI: bus type drm_connector registered
[ 6.971621] systemd[1]: Finished Remount Root and Kernel File Systems.
[ 6.973167] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
[ 6.973192] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped.
[ 6.974064] systemd[1]: Starting Load/Save Random Seed...
[ 6.975047] systemd[1]: Starting Create System Users...
[ 6.975256] systemd[1]: modprobe@drm.service: Succeeded.
[ 6.975495] systemd[1]: Finished Load Kernel Module drm.
[ 6.977430] bpfilter: Loaded bpfilter_umh pid 506
[ 6.977506] bpfilter: read fail 0
[ 6.977509] fbcon: Taking over console
[ 6.977566] Console: switching to colour frame buffer device 210x65
[ 6.981183] RPC: Registered named UNIX socket transport module.
[ 6.981185] RPC: Registered udp transport module.
[ 6.981185] RPC: Registered tcp transport module.
[ 6.981186] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 6.982864] systemd[1]: Finished Load/Save Random Seed.
[ 6.985248] lp: driver loaded but no devices found
[ 6.987371] ppdev: user-space parallel port driver
[ 6.988213] systemd[1]: Finished Create System Users.
[ 6.988865] systemd[1]: Starting Create Static Device Nodes in /dev...
[ 6.994301] IPMI message handler: version 39.2
[ 6.996350] ipmi device interface
[ 6.998988] systemd[1]: Finished Create Static Device Nodes in /dev.
[ 6.999913] systemd[1]: Starting udev Kernel Device Manager...
[ 7.001625] nct6775: Found NCT6798D or compatible chip at 0x2e:0x290
[ 7.003311] systemd[1]: Finished Load Kernel Modules.
[ 7.003641] systemd[1]: Finished Set the console keyboard layout.
[ 7.004302] systemd[1]: Mounting FUSE Control File System...
[ 7.004883] systemd[1]: Mounting Kernel Configuration File System...
[ 7.005481] systemd[1]: Starting Apply Kernel Variables...
[ 7.006275] systemd[1]: Mounted FUSE Control File System.
[ 7.006354] systemd[1]: Mounted Kernel Configuration File System.
[ 7.014073] systemd[1]: Started Journal Service.
[ 7.017272] systemd-journald[480]: Received client request to flush runtime journal.
[ 7.022087] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 7.115044] bpfilter: Loaded bpfilter_umh pid 592
[ 7.115131] bpfilter: read fail 0
[ 7.151937] ccp 0000:0f:00.1: enabling device (0000 -> 0002)
[ 7.154680] ccp 0000:0f:00.1: ccp: unable to access the device: you might be running a broken BIOS.
[ 7.210210] pstore: Using crash dump compression: deflate
[ 7.210216] pstore: Registered efi as persistent store backend
[ 7.211260] usblp 3-4:1.1: usblp1: USB Bidirectional printer dev 2 if 1 alt 0 proto 2 vid 0x04A9 pid 0x1748
[ 7.211281] usbcore: registered new interface driver usblp
[ 7.248497] RAPL PMU: API unit is 2^-32 Joules, 1 fixed counters, 163840 ms ovfl timer
[ 7.248499] RAPL PMU: hw unit of domain package 2^-16 Joules
[ 7.260781] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 7.271278] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 7.278726] bpfilter: Loaded bpfilter_umh pid 876
[ 7.278810] bpfilter: read fail 0
[ 7.289746] SVM: TSC scaling supported
[ 7.289748] kvm: Nested Virtualization enabled
[ 7.289749] SVM: kvm: Nested Paging enabled
[ 7.289750] SEV supported: 509 ASIDs
[ 7.289769] SVM: Virtual VMLOAD VMSAVE supported
[ 7.289769] SVM: Virtual GIF supported
[ 7.289769] SVM: LBR virtualization supported
[ 7.324178] Intel(R) Wireless WiFi driver for Linux
[ 7.324378] iwlwifi 0000:05:00.0: enabling device (0000 -> 0002)
[ 7.326394] MCE: In-kernel MCE decoding enabled.
[ 7.330864] iwlwifi 0000:05:00.0: Direct firmware load for iwlwifi-cc-a0-72.ucode failed with error -2
[ 7.331217] iwlwifi 0000:05:00.0: Direct firmware load for iwlwifi-cc-a0-71.ucode failed with error -2
[ 7.331799] iwlwifi 0000:05:00.0: Direct firmware load for iwlwifi-cc-a0-70.ucode failed with error -2
[ 7.332022] iwlwifi 0000:05:00.0: Direct firmware load for iwlwifi-cc-a0-69.ucode failed with error -2
[ 7.332032] iwlwifi 0000:05:00.0: Direct firmware load for iwlwifi-cc-a0-68.ucode failed with error -2
[ 7.332042] iwlwifi 0000:05:00.0: Direct firmware load for iwlwifi-cc-a0-67.ucode failed with error -2
[ 7.335555] iwlwifi 0000:05:00.0: api flags index 2 larger than supported by driver
[ 7.335567] iwlwifi 0000:05:00.0: TLV_FW_FSEQ_VERSION: FSEQ Version: 89.3.35.37
[ 7.335813] iwlwifi 0000:05:00.0: loaded firmware version 66.f1c864e0.0 cc-a0-66.ucode op_mode iwlmvm
[ 7.416080] Adding 18431996k swap on /dev/sdb5. Priority:-2 extents:1 across:18431996k SSFS
[ 7.421243] EXT4-fs (sda1): mounted filesystem with ordered data mode. Quota mode: none.
[ 7.437028] EXT4-fs (sdb3): mounted filesystem with ordered data mode. Quota mode: none.
[ 7.469346] bpfilter: Loaded bpfilter_umh pid 1088
[ 7.469431] bpfilter: read fail 0
[ 7.469823] EXT4-fs (sdb6): mounted filesystem with ordered data mode. Quota mode: none.
[ 7.478077] intel_rapl_common: Found RAPL domain package
[ 7.478080] intel_rapl_common: Found RAPL domain core
[ 7.482422] snd_hda_intel 0000:0d:00.1: enabling device (0000 -> 0002)
[ 7.482491] snd_hda_intel 0000:0d:00.1: Disabling MSI
[ 7.482499] snd_hda_intel 0000:0d:00.1: Handle vga_switcheroo audio client
[ 7.482568] snd_hda_intel 0000:0f:00.4: enabling device (0000 -> 0002)
[ 7.493524] iwlwifi 0000:05:00.0: Detected Intel(R) Wi-Fi 6 AX200 160MHz, REV=0x340
[ 7.493563] thermal thermal_zone0: failed to read out thermal zone (-61)
[ 7.499967] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.1/0000:0d:00.1/sound/card0/input14
[ 7.500005] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.1/0000:0d:00.1/sound/card0/input15
[ 7.500046] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.1/0000:0d:00.1/sound/card0/input16
[ 7.500077] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.1/0000:0d:00.1/sound/card0/input17
[ 7.500107] input: HDA NVidia HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:03.1/0000:0d:00.1/sound/card0/input18
[ 7.500157] input: HDA NVidia HDMI/DP,pcm=11 as /devices/pci0000:00/0000:00:03.1/0000:0d:00.1/sound/card0/input19
[ 7.502991] iwlwifi 0000:05:00.0: reporting RF_KILL (radio disabled)
[ 7.503863] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC1220: line_outs=3 (0x14/0x15/0x16/0x0/0x0) type:line
[ 7.503868] snd_hda_codec_realtek hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 7.503870] snd_hda_codec_realtek hdaudioC1D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[ 7.503871] snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0
[ 7.503872] snd_hda_codec_realtek hdaudioC1D0: dig-out=0x1e/0x0
[ 7.503872] snd_hda_codec_realtek hdaudioC1D0: inputs:
[ 7.503873] snd_hda_codec_realtek hdaudioC1D0: Front Mic=0x19
[ 7.503879] snd_hda_codec_realtek hdaudioC1D0: Rear Mic=0x18
[ 7.503880] snd_hda_codec_realtek hdaudioC1D0: Line=0x1a
[ 7.507211] audit: type=1400 audit(1653645264.590:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="firejail-default" pid=1120 comm="apparmor_parser"
[ 7.514839] audit: type=1400 audit(1653645264.598:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lsb_release" pid=1123 comm="apparmor_parser"
[ 7.514844] audit: type=1400 audit(1653645264.598:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc" pid=1119 comm="apparmor_parser"
[ 7.514885] audit: type=1400 audit(1653645264.598:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=1124 comm="apparmor_parser"
[ 7.514887] audit: type=1400 audit(1653645264.598:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=1124 comm="apparmor_parser"
[ 7.514902] audit: type=1400 audit(1653645264.598:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-xpdfimport" pid=1122 comm="apparmor_parser"
[ 7.514986] audit: type=1400 audit(1653645264.598:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oopslash" pid=1116 comm="apparmor_parser"
[ 7.515244] audit: type=1400 audit(1653645264.598:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=1121 comm="apparmor_parser"
[ 7.515247] audit: type=1400 audit(1653645264.598:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=1121 comm="apparmor_parser"
[ 7.515253] audit: type=1400 audit(1653645264.598:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=1121 comm="apparmor_parser"
[ 7.616559] input: HD-Audio Generic Front Mic as /devices/pci0000:00/0000:00:08.1/0000:0f:00.4/sound/card1/input20
[ 7.616616] input: HD-Audio Generic Rear Mic as /devices/pci0000:00/0000:00:08.1/0000:0f:00.4/sound/card1/input21
[ 7.616668] input: HD-Audio Generic Line as /devices/pci0000:00/0000:00:08.1/0000:0f:00.4/sound/card1/input22
[ 7.616716] input: HD-Audio Generic Line Out Front as /devices/pci0000:00/0000:00:08.1/0000:0f:00.4/sound/card1/input23
[ 7.616783] input: HD-Audio Generic Line Out Surround as /devices/pci0000:00/0000:00:08.1/0000:0f:00.4/sound/card1/input24
[ 7.616860] input: HD-Audio Generic Line Out CLFE as /devices/pci0000:00/0000:00:08.1/0000:0f:00.4/sound/card1/input25
[ 7.616919] input: HD-Audio Generic Front Headphone as /devices/pci0000:00/0000:00:08.1/0000:0f:00.4/sound/card1/input26
[ 7.618844] iwlwifi 0000:05:00.0: Detected RF HR B3, rfid=0x10a100
[ 7.658410] bpfilter: Loaded bpfilter_umh pid 1212
[ 7.658471] bpfilter: read fail 0
[ 7.683114] iwlwifi 0000:05:00.0: base HW address: dc:fb:48:02:da:96
[ 7.699892] iwlwifi 0000:05:00.0 wlp5s0: renamed from wlan0
[ 7.764615] bpfilter: Loaded bpfilter_umh pid 1349
[ 7.764692] bpfilter: read fail 0
[ 7.900544] bpfilter: Loaded bpfilter_umh pid 1422
[ 7.900604] bpfilter: read fail 0
[ 8.028667] bpfilter: Loaded bpfilter_umh pid 1425
[ 8.028801] bpfilter: read fail 0
[ 8.132141] bpfilter: Loaded bpfilter_umh pid 1429
[ 8.132267] bpfilter: read fail 0
[ 8.233900] bpfilter: Loaded bpfilter_umh pid 1431
[ 8.234011] bpfilter: read fail 0
[ 8.292519] nvidia-gpu 0000:0d:00.3: i2c timeout error e0000000
[ 8.292542] ucsi_ccg 0-0008: i2c_transfer failed -110
[ 8.292557] ucsi_ccg 0-0008: ucsi_ccg_init failed - -110
[ 8.292574] ucsi_ccg: probe of 0-0008 failed with error -110
[ 8.313543] bpfilter: Loaded bpfilter_umh pid 1433
[ 8.313663] bpfilter: read fail 0
[ 8.395136] bpfilter: Loaded bpfilter_umh pid 1436
[ 8.395265] bpfilter: read fail 0
[ 8.515063] bpfilter: Loaded bpfilter_umh pid 1438
[ 8.515171] bpfilter: read fail 0
[ 8.615463] bpfilter: Loaded bpfilter_umh pid 1440
[ 8.615548] bpfilter: read fail 0
[ 8.675017] bpfilter: Loaded bpfilter_umh pid 1442
[ 8.675125] bpfilter: read fail 0
[ 8.700055] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 8.707808] ata1.00: configured for UDMA/100
[ 8.770690] bpfilter: Loaded bpfilter_umh pid 1448
[ 8.770783] bpfilter: read fail 0
[ 8.888456] bpfilter: Loaded bpfilter_umh pid 1457
[ 8.888570] bpfilter: read fail 0
[ 9.005849] bpfilter: Loaded bpfilter_umh pid 1466
[ 9.005955] bpfilter: read fail 0
[ 9.082609] bpfilter: Loaded bpfilter_umh pid 1468
[ 9.082661] bpfilter: read fail 0
[ 9.151021] bpfilter: Loaded bpfilter_umh pid 1470
[ 9.151129] bpfilter: read fail 0
[ 9.201861] bpfilter: Loaded bpfilter_umh pid 1472
[ 9.201980] bpfilter: read fail 0
[ 9.278710] bpfilter: Loaded bpfilter_umh pid 1474
[ 9.278813] bpfilter: read fail 0
[ 9.338527] bpfilter: Loaded bpfilter_umh pid 1476
[ 9.338646] bpfilter: read fail 0
[ 9.415544] bpfilter: Loaded bpfilter_umh pid 1479
[ 9.415668] bpfilter: read fail 0
[ 9.495135] bpfilter: Loaded bpfilter_umh pid 1481
[ 9.495249] bpfilter: read fail 0
[ 9.552576] bpfilter: Loaded bpfilter_umh pid 1485
[ 9.552710] bpfilter: read fail 0
[ 9.618862] bpfilter: Loaded bpfilter_umh pid 1487
[ 9.618964] bpfilter: read fail 0
[ 9.699150] bpfilter: Loaded bpfilter_umh pid 1489
[ 9.699284] bpfilter: read fail 0
[ 9.775465] bpfilter: Loaded bpfilter_umh pid 1491
[ 9.775605] bpfilter: read fail 0
[ 9.872004] bpfilter: Loaded bpfilter_umh pid 1495
[ 9.872138] bpfilter: read fail 0
[ 9.938042] bpfilter: Loaded bpfilter_umh pid 1497
[ 9.938120] bpfilter: read fail 0
[ 10.003803] bpfilter: Loaded bpfilter_umh pid 1501
[ 10.003896] bpfilter: read fail 0
[ 10.066965] bpfilter: Loaded bpfilter_umh pid 1503
[ 10.067087] bpfilter: read fail 0
[ 10.145959] bpfilter: Loaded bpfilter_umh pid 1505
[ 10.146077] bpfilter: read fail 0
[ 10.218847] bpfilter: Loaded bpfilter_umh pid 1507
[ 10.218940] bpfilter: read fail 0
[ 10.282862] bpfilter: Loaded bpfilter_umh pid 1510
[ 10.282994] bpfilter: read fail 0
[ 10.333736] bpfilter: Loaded bpfilter_umh pid 1512
[ 10.333827] bpfilter: read fail 0
[ 10.393968] bpfilter: Loaded bpfilter_umh pid 1514
[ 10.394084] bpfilter: read fail 0
[ 10.449779] bpfilter: Loaded bpfilter_umh pid 1516
[ 10.449896] bpfilter: read fail 0
[ 10.510983] bpfilter: Loaded bpfilter_umh pid 1518
[ 10.511100] bpfilter: read fail 0
[ 10.557068] e1000e 0000:09:00.0 enp9s0: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None
[ 10.585854] bpfilter: Loaded bpfilter_umh pid 1520
[ 10.585971] bpfilter: read fail 0
[ 10.648649] igb 0000:07:00.0 enp7s0: igb: enp7s0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX
[ 10.658541] bpfilter: Loaded bpfilter_umh pid 1522
[ 10.658653] bpfilter: read fail 0
[ 10.750613] bpfilter: Loaded bpfilter_umh pid 1546
[ 10.750725] bpfilter: read fail 0
[ 10.818775] bpfilter: Loaded bpfilter_umh pid 1548
[ 10.818884] bpfilter: read fail 0
[ 10.902775] bpfilter: Loaded bpfilter_umh pid 1550
[ 10.902881] bpfilter: read fail 0
[ 10.969802] bpfilter: Loaded bpfilter_umh pid 1552
[ 10.969913] bpfilter: read fail 0
[ 11.070664] bpfilter: Loaded bpfilter_umh pid 1555
[ 11.070770] bpfilter: read fail 0
[ 11.174024] bpfilter: Loaded bpfilter_umh pid 1557
[ 11.174114] bpfilter: read fail 0
[ 11.242653] bpfilter: Loaded bpfilter_umh pid 1559
[ 11.242744] bpfilter: read fail 0
[ 11.302511] bpfilter: Loaded bpfilter_umh pid 1561
[ 11.302593] bpfilter: read fail 0
[ 11.362544] bpfilter: Loaded bpfilter_umh pid 1563
[ 11.362610] bpfilter: read fail 0
[ 11.422852] bpfilter: Loaded bpfilter_umh pid 1565
[ 11.422918] bpfilter: read fail 0
[ 11.474058] bpfilter: Loaded bpfilter_umh pid 1567
[ 11.474095] bpfilter: read fail 0
[ 11.536457] bpfilter: Loaded bpfilter_umh pid 1570
[ 11.536493] bpfilter: read fail 0
[ 11.599814] bpfilter: Loaded bpfilter_umh pid 1573
[ 11.599862] bpfilter: read fail 0
[ 11.657774] bpfilter: Loaded bpfilter_umh pid 1575
[ 11.657813] bpfilter: read fail 0
[ 11.730082] bpfilter: Loaded bpfilter_umh pid 1582
[ 11.730134] bpfilter: read fail 0
[ 11.791920] bpfilter: Loaded bpfilter_umh pid 1585
[ 11.791958] bpfilter: read fail 0
[ 11.853820] bpfilter: Loaded bpfilter_umh pid 1587
[ 11.853863] bpfilter: read fail 0
[ 11.919750] bpfilter: Loaded bpfilter_umh pid 1590
[ 11.919856] bpfilter: read fail 0
[ 11.986683] bpfilter: Loaded bpfilter_umh pid 1592
[ 11.986758] bpfilter: read fail 0
[ 12.066748] bpfilter: Loaded bpfilter_umh pid 1594
[ 12.066815] bpfilter: read fail 0
[ 12.158992] bpfilter: Loaded bpfilter_umh pid 1596
[ 12.159059] bpfilter: read fail 0
[ 12.210564] bpfilter: Loaded bpfilter_umh pid 1598
[ 12.210641] bpfilter: read fail 0
[ 12.262167] bpfilter: Loaded bpfilter_umh pid 1600
[ 12.262251] bpfilter: read fail 0
[ 12.334564] bpfilter: Loaded bpfilter_umh pid 1602
[ 12.334647] bpfilter: read fail 0
[ 12.390217] bpfilter: Loaded bpfilter_umh pid 1604
[ 12.390300] bpfilter: read fail 0
[ 12.442604] bpfilter: Loaded bpfilter_umh pid 1606
[ 12.442689] bpfilter: read fail 0
[ 12.500002] bpfilter: Loaded bpfilter_umh pid 1609
[ 12.500138] bpfilter: read fail 0
[ 12.593538] bpfilter: Loaded bpfilter_umh pid 1636
[ 12.593606] bpfilter: read fail 0
[ 12.664615] usblp1: removed
[ 12.670374] usblp 3-4:1.1: usblp1: USB Bidirectional printer dev 2 if 1 alt 0 proto 2 vid 0x04A9 pid 0x1748
[ 12.694295] bpfilter: Loaded bpfilter_umh pid 1669
[ 12.694365] bpfilter: read fail 0
[ 12.766491] bpfilter: Loaded bpfilter_umh pid 1671
[ 12.766589] bpfilter: read fail 0
[ 12.862961] bpfilter: Loaded bpfilter_umh pid 1673
[ 12.863070] bpfilter: read fail 0
[ 12.943158] bpfilter: Loaded bpfilter_umh pid 1675
[ 12.943281] bpfilter: read fail 0
[ 13.023787] bpfilter: Loaded bpfilter_umh pid 1678
[ 13.023892] bpfilter: read fail 0
[ 13.082757] bpfilter: Loaded bpfilter_umh pid 1680
[ 13.082860] bpfilter: read fail 0
[ 13.143215] bpfilter: Loaded bpfilter_umh pid 1682
[ 13.143325] bpfilter: read fail 0
[ 13.204468] bpfilter: Loaded bpfilter_umh pid 1685
[ 13.204593] bpfilter: read fail 0
[ 13.271067] bpfilter: Loaded bpfilter_umh pid 1687
[ 13.271150] bpfilter: read fail 0
[ 13.334903] bpfilter: Loaded bpfilter_umh pid 1689
[ 13.335010] bpfilter: read fail 0
[ 13.394908] bpfilter: Loaded bpfilter_umh pid 1691
[ 13.395018] bpfilter: read fail 0
[ 13.458946] bpfilter: Loaded bpfilter_umh pid 1693
[ 13.459046] bpfilter: read fail 0
[ 13.522932] bpfilter: Loaded bpfilter_umh pid 1695
[ 13.523031] bpfilter: read fail 0
[ 13.586901] bpfilter: Loaded bpfilter_umh pid 1699
[ 13.587024] bpfilter: read fail 0
[ 13.650980] bpfilter: Loaded bpfilter_umh pid 1703
[ 13.651082] bpfilter: read fail 0
[ 13.706786] bpfilter: Loaded bpfilter_umh pid 1705
[ 13.706901] bpfilter: read fail 0
[ 13.762944] bpfilter: Loaded bpfilter_umh pid 1707
[ 13.763060] bpfilter: read fail 0
[ 13.830774] bpfilter: Loaded bpfilter_umh pid 1709
[ 13.830886] bpfilter: read fail 0
[ 13.892982] bpfilter: Loaded bpfilter_umh pid 1712
[ 13.893092] bpfilter: read fail 0
[ 13.980445] bpfilter: Loaded bpfilter_umh pid 1715
[ 13.980564] bpfilter: read fail 0
[ 14.063082] bpfilter: Loaded bpfilter_umh pid 1717
[ 14.063194] bpfilter: read fail 0
[ 14.151907] bpfilter: Loaded bpfilter_umh pid 1721
[ 14.152034] bpfilter: read fail 0
[ 14.226951] bpfilter: Loaded bpfilter_umh pid 1723
[ 14.227065] bpfilter: read fail 0
[ 14.279178] bpfilter: Loaded bpfilter_umh pid 1725
[ 14.279299] bpfilter: read fail 0
[ 14.335027] bpfilter: Loaded bpfilter_umh pid 1727
[ 14.335138] bpfilter: read fail 0
[ 14.407817] bpfilter: Loaded bpfilter_umh pid 1731
[ 14.407934] bpfilter: read fail 0
[ 14.491016] bpfilter: Loaded bpfilter_umh pid 1733
[ 14.491122] bpfilter: read fail 0
[ 14.563165] bpfilter: Loaded bpfilter_umh pid 1735
[ 14.563283] bpfilter: read fail 0
[ 14.639158] bpfilter: Loaded bpfilter_umh pid 1737
[ 14.639274] bpfilter: read fail 0
[ 14.786836] kauditd_printk_skb: 14 callbacks suppressed
[ 14.786840] audit: type=1400 audit(1653645271.870:26): apparmor="DENIED" operation="capable" profile="/usr/sbin/cups-browsed" pid=1860 comm="cups-browsed" capability=23 capname="sys_nice"
[ 15.816948] NFSD: Using UMH upcall client tracking operations.
[ 15.816952] NFSD: starting 90-second grace period (net f0000000)
[ 33.718353] logitech-hidpp-device 0003:046D:4051.0006: HID++ 4.5 device connected.
[ 84.595104] [UFW BLOCK] IN=enp9s0 OUT= MAC=01:00:5e:00:00:01:dc:15:c8:b6:c8:fe:08:00 SRC=192.168.178.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0xC0 TTL=1 ID=19442 DF PROTO=2
[ 114.231147] ISO 9660 Extensions: Microsoft Joliet Level 3
[ 114.233528] ISO 9660 Extensions: IEEE_1282
[ 133.535017] ata1.00: exception Emask 0x10 SAct 0x0 SErr 0x40d0000 action 0xe frozen
[ 133.535024] ata1.00: irq_stat 0x00000040, connection status changed
[ 133.535025] ata1: SError: { PHYRdyChg CommWake 10B8B DevExch }
[ 133.535028] ata1.00: cmd a0/01:00:00:00:fc/00:00:00:00:00/a0 tag 15 dma 131072 in
Read(10) 28 00 00 00 13 19 00 00 40 00res 50/00:03:00:00:00/00:00:00:00:00/a0 Emask 0x10 (ATA bus error)
[ 133.535033] ata1.00: status: { DRDY }
[ 133.535037] ata1: hard resetting link
[ 134.418991] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 134.426501] ata1.00: configured for UDMA/100
[ 134.427110] sr 0:0:0:0: [sr0] tag#15 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_OK cmd_age=0s
[ 134.427113] sr 0:0:0:0: [sr0] tag#15 Sense Key : Illegal Request [current]
[ 134.427114] sr 0:0:0:0: [sr0] tag#15 Add. Sense: Unaligned write command
[ 134.427116] sr 0:0:0:0: [sr0] tag#15 CDB: Read(10) 28 00 00 00 13 19 00 00 40 00
[ 134.427117] I/O error, dev sr0, sector 19556 op 0x0:(READ) flags 0x80700 phys_seg 4 prio class 0
[ 134.427126] ata1: EH complete
[ 134.554987] ata1.00: limiting speed to UDMA/66:PIO4
[ 134.554991] ata1.00: exception Emask 0x10 SAct 0x0 SErr 0x40d0000 action 0xe frozen
[ 134.554994] ata1.00: irq_stat 0x00000040, connection status changed
[ 134.554995] ata1: SError: { PHYRdyChg CommWake 10B8B DevExch }
[ 134.554999] ata1.00: cmd a0/01:00:00:00:10/00:00:00:00:00/a0 tag 11 dma 4096 in
Read(10) 28 00 00 00 13 4f 00 00 02 00res 50/00:03:00:00:00/00:00:00:00:00/a0 Emask 0x10 (ATA bus error)
[ 134.555003] ata1.00: status: { DRDY }
[ 134.555007] ata1: hard resetting link
[ 135.431012] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 135.438461] ata1.00: configured for UDMA/66
[ 135.439068] ata1: EH complete
[ 141.175204] ata1.00: exception Emask 0x10 SAct 0x0 SErr 0x40d0000 action 0xe frozen
[ 141.175210] ata1.00: irq_stat 0x00000040, connection status changed
[ 141.175212] ata1: SError: { PHYRdyChg CommWake 10B8B DevExch }
[ 141.175216] ata1.00: cmd a0/01:00:00:00:fc/00:00:00:00:00/a0 tag 22 dma 131072 in
Read(10) 28 00 00 00 1e 19 00 00 40 00res 50/00:03:00:00:00/00:00:00:00:00/a0 Emask 0x10 (ATA bus error)
[ 141.175221] ata1.00: status: { DRDY }
[ 141.175224] ata1: hard resetting link
[ 142.051228] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 142.058737] ata1.00: configured for UDMA/66
[ 142.059285] sr 0:0:0:0: [sr0] tag#22 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_OK cmd_age=0s
[ 142.059288] sr 0:0:0:0: [sr0] tag#22 Sense Key : Illegal Request [current]
[ 142.059290] sr 0:0:0:0: [sr0] tag#22 Add. Sense: Unaligned write command
[ 142.059291] sr 0:0:0:0: [sr0] tag#22 CDB: Read(10) 28 00 00 00 1e 19 00 00 40 00
[ 142.059292] I/O error, dev sr0, sector 30820 op 0x0:(READ) flags 0x80700 phys_seg 2 prio class 0
[ 142.059304] ata1: EH complete
[ 145.187308] ata1.00: exception Emask 0x10 SAct 0x0 SErr 0x40d0000 action 0xe frozen
[ 145.187317] ata1.00: irq_stat 0x00000040, connection status changed
[ 145.187319] ata1: SError: { PHYRdyChg CommWake 10B8B DevExch }
[ 145.187324] ata1.00: cmd a0/01:00:00:00:fc/00:00:00:00:00/a0 tag 19 dma 131072 in
Read(10) 28 00 00 00 2b 19 00 00 40 00res 50/00:03:00:00:00/00:00:00:00:00/a0 Emask 0x10 (ATA bus error)
[ 145.187330] ata1.00: status: { DRDY }
[ 145.187334] ata1: hard resetting link
[ 146.071327] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 146.078793] ata1.00: configured for UDMA/66
[ 146.079403] sr 0:0:0:0: [sr0] tag#19 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_OK cmd_age=0s
[ 146.079406] sr 0:0:0:0: [sr0] tag#19 Sense Key : Illegal Request [current]
[ 146.079408] sr 0:0:0:0: [sr0] tag#19 Add. Sense: Unaligned write command
[ 146.079410] sr 0:0:0:0: [sr0] tag#19 CDB: Read(10) 28 00 00 00 2b 19 00 00 40 00
[ 146.079411] I/O error, dev sr0, sector 44132 op 0x0:(READ) flags 0x80700 phys_seg 2 prio class 0
[ 146.079421] ata1: EH complete
[ 146.175330] ata1.00: exception Emask 0x10 SAct 0x0 SErr 0x40d0000 action 0xe frozen
[ 146.175339] ata1.00: irq_stat 0x00000040, connection status changed
[ 146.175341] ata1: SError: { PHYRdyChg CommWake 10B8B DevExch }
[ 146.175346] ata1.00: cmd a0/01:00:00:00:10/00:00:00:00:00/a0 tag 5 dma 4096 in
Read(10) 28 00 00 00 2b 51 00 00 02 00res 50/00:03:00:00:00/00:00:00:00:00/a0 Emask 0x10 (ATA bus error)
[ 146.175351] ata1.00: status: { DRDY }
[ 146.175356] ata1: hard resetting link
[ 147.059350] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 147.066798] ata1.00: configured for UDMA/66
[ 147.067405] ata1: EH complete
[ 148.087377] ata1.00: limiting speed to UDMA/33:PIO4
[ 148.087382] ata1.00: exception Emask 0x10 SAct 0x0 SErr 0x40d0000 action 0xe frozen
[ 148.087386] ata1.00: irq_stat 0x00000040, connection status changed
[ 148.087387] ata1: SError: { PHYRdyChg CommWake 10B8B DevExch }
[ 148.087392] ata1.00: cmd a0/01:00:00:00:fc/00:00:00:00:00/a0 tag 12 dma 131072 in
Read(10) 28 00 00 00 33 19 00 00 40 00res 50/00:03:00:00:00/00:00:00:00:00/a0 Emask 0x10 (ATA bus error)
[ 148.087397] ata1.00: status: { DRDY }
[ 148.087401] ata1: hard resetting link
[ 148.963385] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 148.970874] ata1.00: configured for UDMA/33
[ 148.971490] sr 0:0:0:0: [sr0] tag#12 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_OK cmd_age=0s
[ 148.971493] sr 0:0:0:0: [sr0] tag#12 Sense Key : Illegal Request [current]
[ 148.971496] sr 0:0:0:0: [sr0] tag#12 Add. Sense: Unaligned write command
[ 148.971498] sr 0:0:0:0: [sr0] tag#12 CDB: Read(10) 28 00 00 00 33 19 00 00 40 00
[ 148.971499] I/O error, dev sr0, sector 52324 op 0x0:(READ) flags 0x80700 phys_seg 2 prio class 0
[ 148.971518] ata1: EH complete
[ 150.979412] ata1.00: exception Emask 0x10 SAct 0x0 SErr 0x40d0000 action 0xe frozen
[ 150.979419] ata1.00: irq_stat 0x00000040, connection status changed
[ 150.979420] ata1: SError: { PHYRdyChg CommWake 10B8B DevExch }
[ 150.979425] ata1.00: cmd a0/01:00:00:00:fc/00:00:00:00:00/a0 tag 23 dma 131072 in
Read(10) 28 00 00 00 3d 59 00 00 40 00res 50/00:03:00:00:00/00:00:00:00:00/a0 Emask 0x10 (ATA bus error)
[ 150.979429] ata1.00: status: { DRDY }
[ 150.979433] ata1: hard resetting link
[ 151.863433] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 151.870955] ata1.00: configured for UDMA/33
[ 151.871503] sr 0:0:0:0: [sr0] tag#23 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_OK cmd_age=0s
[ 151.871511] sr 0:0:0:0: [sr0] tag#23 Sense Key : Illegal Request [current]
[ 151.871515] sr 0:0:0:0: [sr0] tag#23 Add. Sense: Unaligned write command
[ 151.871519] sr 0:0:0:0: [sr0] tag#23 CDB: Read(10) 28 00 00 00 3d 59 00 00 40 00
[ 151.871521] I/O error, dev sr0, sector 62820 op 0x0:(READ) flags 0x80700 phys_seg 2 prio class 0
[ 151.871542] ata1: EH complete
[ 151.959434] ata1.00: exception Emask 0x10 SAct 0x0 SErr 0x40d0000 action 0xe frozen
[ 151.959441] ata1.00: irq_stat 0x00000040, connection status changed
[ 151.959442] ata1: SError: { PHYRdyChg CommWake 10B8B DevExch }
[ 151.959446] ata1.00: cmd a0/01:00:00:00:10/00:00:00:00:00/a0 tag 9 dma 4096 in
Read(10) 28 00 00 00 3d 81 00 00 02 00res 50/00:03:00:00:00/00:00:00:00:00/a0 Emask 0x10 (ATA bus error)
[ 151.959451] ata1.00: status: { DRDY }
[ 151.959455] ata1: hard resetting link
[ 152.847442] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 152.854887] ata1.00: configured for UDMA/33
[ 152.855491] ata1: EH complete
[ 209.596696] [UFW BLOCK] IN=enp9s0 OUT= MAC=01:00:5e:00:00:01:dc:15:c8:b6:c8:fe:08:00 SRC=192.168.178.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0xC0 TTL=1 ID=27432 DF PROTO=2
[ 224.807278] [UFW BLOCK] IN=enp9s0 OUT= MAC=68:05:ca:0c:63:13:dc:15:c8:b6:c8:fe:08:00 SRC=192.168.178.1 DST=192.168.178.21 LEN=60 TOS=0x00 PREC=0x00 TTL=64 ID=50901 DF PROTO=TCP SPT=35577 DPT=80 WINDOW=29200 RES=0x00 SYN URGP=0
[ 225.833160] [UFW BLOCK] IN=enp9s0 OUT= MAC=68:05:ca:0c:63:13:dc:15:c8:b6:c8:fe:08:00 SRC=192.168.178.1 DST=192.168.178.21 LEN=60 TOS=0x00 PREC=0x00 TTL=64 ID=50902 DF PROTO=TCP SPT=35577 DPT=80 WINDOW=29200 RES=0x00 SYN URGP=0
[ 227.848994] [UFW BLOCK] IN=enp9s0 OUT= MAC=68:05:ca:0c:63:13:dc:15:c8:b6:c8:fe:08:00 SRC=192.168.178.1 DST=192.168.178.21 LEN=60 TOS=0x00 PREC=0x00 TTL=64 ID=50903 DF PROTO=TCP SPT=35577 DPT=80 WINDOW=29200 RES=0x00 SYN URGP=0
[ 232.073210] [UFW BLOCK] IN=enp9s0 OUT= MAC=68:05:ca:0c:63:13:dc:15:c8:b6:c8:fe:08:00 SRC=192.168.178.1 DST=192.168.178.21 LEN=60 TOS=0x00 PREC=0x00 TTL=64 ID=50904 DF PROTO=TCP SPT=35577 DPT=80 WINDOW=29200 RES=0x00 SYN URGP=0
[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 833 bytes --]
^ permalink raw reply [flat|nested] 20+ messages in thread