Linux IIO development
 help / color / mirror / Atom feed
From: Jonathan Cameron <jic23@kernel.org>
To: Philipp Jungkamp <p.jungkamp@gmx.net>
Cc: Jiri Kosina <jikos@kernel.org>,
	Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>,
	linux-iio@vger.kernel.org
Subject: Re: [PATCH v4 3/4] IIO: hid-sensor-als: Use generic usage
Date: Sat, 26 Nov 2022 19:05:19 +0000	[thread overview]
Message-ID: <20221126190519.0f804316@jic23-huawei> (raw)
In-Reply-To: <20221124233841.3103-4-p.jungkamp@gmx.net>

On Fri, 25 Nov 2022 00:38:40 +0100
Philipp Jungkamp <p.jungkamp@gmx.net> wrote:

> Use a generic 'hsdev->usage' instead of the HID_USAGE_SENSOR_ALS to
> allow this driver to drive the Lenovo custom ambient light sensor,
> which is registered under a 'custom' usage and not HID_USAGE_SENSOR_ALS.
> 
> Add the Lenovo Intelligent Sensing Solution (LISS) ambient light sensor
> to the platform device ids.
> 
> Signed-off-by: Philipp Jungkamp <p.jungkamp@gmx.net>
Again, please pick up tags given when posting new versions.

Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

> ---
> 
> v2:
> - Remove some unnecessary newlines in function calls.
> 
> v3:
> - No change.
> 
> v4:
> - No change.
> 
>  drivers/iio/light/hid-sensor-als.c | 27 ++++++++++++++-------------
>  1 file changed, 14 insertions(+), 13 deletions(-)
> 
> diff --git a/drivers/iio/light/hid-sensor-als.c b/drivers/iio/light/hid-sensor-als.c
> index 5a1a625d8d16..eb1aedad7edc 100644
> --- a/drivers/iio/light/hid-sensor-als.c
> +++ b/drivers/iio/light/hid-sensor-als.c
> @@ -86,6 +86,7 @@ static int als_read_raw(struct iio_dev *indio_dev,
>  			      long mask)
>  {
>  	struct als_state *als_state = iio_priv(indio_dev);
> +	struct hid_sensor_hub_device *hsdev = als_state->common_attributes.hsdev;
>  	int report_id = -1;
>  	u32 address;
>  	int ret_type;
> @@ -110,11 +111,8 @@ static int als_read_raw(struct iio_dev *indio_dev,
>  			hid_sensor_power_state(&als_state->common_attributes,
>  						true);
>  			*val = sensor_hub_input_attr_get_raw_value(
> -					als_state->common_attributes.hsdev,
> -					HID_USAGE_SENSOR_ALS, address,
> -					report_id,
> -					SENSOR_HUB_SYNC,
> -					min < 0);
> +					hsdev, hsdev->usage, address, report_id,
> +					SENSOR_HUB_SYNC, min < 0);
>  			hid_sensor_power_state(&als_state->common_attributes,
>  						false);
>  		} else {
> @@ -259,9 +257,7 @@ static int als_parse_report(struct platform_device *pdev,
>  	dev_dbg(&pdev->dev, "als %x:%x\n", st->als_illum.index,
>  			st->als_illum.report_id);
> 
> -	st->scale_precision = hid_sensor_format_scale(
> -				HID_USAGE_SENSOR_ALS,
> -				&st->als_illum,
> +	st->scale_precision = hid_sensor_format_scale(usage_id, &st->als_illum,
>  				&st->scale_pre_decml, &st->scale_post_decml);
> 
>  	return ret;
> @@ -285,7 +281,8 @@ static int hid_als_probe(struct platform_device *pdev)
>  	als_state->common_attributes.hsdev = hsdev;
>  	als_state->common_attributes.pdev = pdev;
> 
> -	ret = hid_sensor_parse_common_attributes(hsdev, HID_USAGE_SENSOR_ALS,
> +	ret = hid_sensor_parse_common_attributes(hsdev,
> +					hsdev->usage,
>  					&als_state->common_attributes,
>  					als_sensitivity_addresses,
>  					ARRAY_SIZE(als_sensitivity_addresses));
> @@ -303,7 +300,8 @@ static int hid_als_probe(struct platform_device *pdev)
> 
>  	ret = als_parse_report(pdev, hsdev,
>  			       (struct iio_chan_spec *)indio_dev->channels,
> -			       HID_USAGE_SENSOR_ALS, als_state);
> +			       hsdev->usage,
> +			       als_state);
>  	if (ret) {
>  		dev_err(&pdev->dev, "failed to setup attributes\n");
>  		return ret;
> @@ -333,8 +331,7 @@ static int hid_als_probe(struct platform_device *pdev)
>  	als_state->callbacks.send_event = als_proc_event;
>  	als_state->callbacks.capture_sample = als_capture_sample;
>  	als_state->callbacks.pdev = pdev;
> -	ret = sensor_hub_register_callback(hsdev, HID_USAGE_SENSOR_ALS,
> -					&als_state->callbacks);
> +	ret = sensor_hub_register_callback(hsdev, hsdev->usage, &als_state->callbacks);
>  	if (ret < 0) {
>  		dev_err(&pdev->dev, "callback reg failed\n");
>  		goto error_iio_unreg;
> @@ -356,7 +353,7 @@ static int hid_als_remove(struct platform_device *pdev)
>  	struct iio_dev *indio_dev = platform_get_drvdata(pdev);
>  	struct als_state *als_state = iio_priv(indio_dev);
> 
> -	sensor_hub_remove_callback(hsdev, HID_USAGE_SENSOR_ALS);
> +	sensor_hub_remove_callback(hsdev, hsdev->usage);
>  	iio_device_unregister(indio_dev);
>  	hid_sensor_remove_trigger(indio_dev, &als_state->common_attributes);
> 
> @@ -368,6 +365,10 @@ static const struct platform_device_id hid_als_ids[] = {
>  		/* Format: HID-SENSOR-usage_id_in_hex_lowercase */
>  		.name = "HID-SENSOR-200041",
>  	},
> +	{
> +		/* Format: HID-SENSOR-custom_sensor_tag-usage_id_in_hex_lowercase */
> +		.name = "HID-SENSOR-LISS-0041",
> +	},
>  	{ /* sentinel */ }
>  };
>  MODULE_DEVICE_TABLE(platform, hid_als_ids);
> --
> 2.38.1
> 


  reply	other threads:[~2022-11-26 18:52 UTC|newest]

Thread overview: 15+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-11-24 23:38 [PATCH v4 0/4] IIO: More HID custom sensors Philipp Jungkamp
2022-11-24 23:38 ` [PATCH v4 1/4] HID: hid-sensor-custom: Allow more custom iio sensors Philipp Jungkamp
2022-11-26 19:11   ` Jonathan Cameron
2022-11-24 23:38 ` [PATCH v4 2/4] HID: hid-sensor-custom: Add LISS custom sensors Philipp Jungkamp
2022-11-26 19:11   ` Jonathan Cameron
2022-11-24 23:38 ` [PATCH v4 3/4] IIO: hid-sensor-als: Use generic usage Philipp Jungkamp
2022-11-26 19:05   ` Jonathan Cameron [this message]
2022-11-24 23:38 ` [PATCH v4 4/4] IIO: hid-sensor-prox: " Philipp Jungkamp
2022-11-26 19:04   ` Jonathan Cameron
2022-11-27 17:33 ` [PATCH v4 0/4] IIO: More HID custom sensors srinivas pandruvada
2022-12-13 22:51   ` Philipp Jungkamp
2022-12-14  9:27     ` Jonathan Cameron
2022-12-14 17:20     ` Jiri Kosina
2022-12-15 16:21       ` Jonathan Cameron
2022-12-20 14:26         ` Jiri Kosina

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20221126190519.0f804316@jic23-huawei \
    --to=jic23@kernel.org \
    --cc=jikos@kernel.org \
    --cc=linux-iio@vger.kernel.org \
    --cc=p.jungkamp@gmx.net \
    --cc=srinivas.pandruvada@linux.intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox