From: Jonathan Cameron <jic23@kernel.org>
To: Astrid Rost <astrid.rost@axis.com>
Cc: Lars-Peter Clausen <lars@metafoo.de>, <linux-iio@vger.kernel.org>,
<linux-kernel@vger.kernel.org>, <kernel@axis.com>
Subject: Re: [PATCH v2 5/7] iio: light: vcnl4000: Add debounce count for vcnl4040/4200
Date: Sun, 14 May 2023 18:37:48 +0100 [thread overview]
Message-ID: <20230514183748.256a210c@jic23-huawei> (raw)
In-Reply-To: <20230509140153.3279288-6-astrid.rost@axis.com>
On Tue, 9 May 2023 16:01:51 +0200
Astrid Rost <astrid.rost@axis.com> wrote:
> Add read/write attribute for proximity and illumination debounce-count
> and read attribute for available debounce-counts.
> The debounce-count is set in the interrupt persistence flags
> (PS_PERS and ALS_PERS). An interrupt will not be asserted if the raw
> value is not over (or lower) than the threshold for the set
> continued refresh times.
> This is supported for vcnl4040 vcnl4200.
Why debounce count? That has previously just been used for step detection
on accelerometers and has a pretty specific definition in
See Documentation/ABI/testing/sysfs-bus-iio
"
What: /sys/.../iio:deviceX/in_steps_debounce_count
...
Specifies the number of steps that must occur within
in_steps_filter_debounce_time for the pedometer to decide the
consumer is making steps.
"
What you probably want is period, though that is defined in seconds so
you may need some unit conversions. That is defined for events, not for
a channel so IIO_EV_INFO_PERIOD.
"
Period of time (in seconds) for which the condition must be
met before an event is generated. If direction is not
specified then this period applies to both directions.
"
>
> Signed-off-by: Astrid Rost <astrid.rost@axis.com>
> ---
> drivers/iio/light/vcnl4000.c | 156 ++++++++++++++++++++++++++++++++++-
> 1 file changed, 152 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/iio/light/vcnl4000.c b/drivers/iio/light/vcnl4000.c
> index 68eea686b2dc..b8ce4ed6b0bb 100644
> --- a/drivers/iio/light/vcnl4000.c
> +++ b/drivers/iio/light/vcnl4000.c
> @@ -84,8 +84,10 @@
> #define VCNL4040_ALS_CONF_ALS_SHUTDOWN BIT(0)
> #define VCNL4040_ALS_CONF_IT GENMASK(7, 6) /* Ambient integration time */
> #define VCNL4040_ALS_CONF_INT_EN BIT(1) /* Ambient light Interrupt enable */
> +#define VCNL4040_ALS_CONF_PERS GENMASK(3, 2) /* Ambient interrupt persistence setting */
> #define VCNL4040_PS_CONF1_PS_SHUTDOWN BIT(0)
> #define VCNL4040_PS_CONF2_PS_IT GENMASK(3, 1) /* Proximity integration time */
> +#define VCNL4040_CONF1_PS_PERS GENMASK(5, 4) /* Proximity interrupt persistence setting */
> #define VCNL4040_PS_CONF2_PS_INT GENMASK(9, 8) /* Proximity interrupt mode */
> #define VCNL4040_PS_IF_AWAY BIT(8) /* Proximity event cross low threshold */
> #define VCNL4040_PS_IF_CLOSE BIT(9) /* Proximity event cross high threshold */
> @@ -153,6 +155,9 @@ static const int vcnl4200_als_it_times[][2] = {
> {0, 400000},
> };
>
> +static const int vcnl4040_als_debounce_count[] = {1, 2, 4, 8};
> +static const int vcnl4040_ps_debounce_count[] = {1, 2, 3, 4};
> +
> #define VCNL4000_SLEEP_DELAY_MS 2000 /* before we enter pm_runtime_suspend */
>
> enum vcnl4000_device_ids {
> @@ -680,6 +685,106 @@ static ssize_t vcnl4040_write_ps_it(struct vcnl4000_data *data, int val)
> return ret;
> }
>
> +static ssize_t vcnl4040_read_als_debounce_count(struct vcnl4000_data *data, int *val)
> +{
> + int ret;
> +
> + ret = i2c_smbus_read_word_data(data->client, VCNL4200_AL_CONF);
> + if (ret < 0)
> + return ret;
> +
> + ret = FIELD_GET(VCNL4040_ALS_CONF_PERS, ret);
> +
> + if (ret >= ARRAY_SIZE(vcnl4200_als_it_times))
> + return -EINVAL;
> +
> + *val = vcnl4040_als_debounce_count[ret];
> +
> + return ret;
> +}
> +
> +static ssize_t vcnl4040_write_als_debounce_count(struct vcnl4000_data *data, int val)
> +{
> + unsigned int i;
> + int ret, index = -1;
> + u16 regval;
> +
> + for (i = 0; i < ARRAY_SIZE(vcnl4040_als_debounce_count); i++) {
> + if (val == vcnl4040_als_debounce_count[i]) {
> + index = i;
> + break;
> + }
> + }
> +
> + if (index < 0)
> + return -EINVAL;
> +
> + mutex_lock(&data->vcnl4000_lock);
> +
> + ret = i2c_smbus_read_word_data(data->client, VCNL4200_AL_CONF);
> + if (ret < 0)
> + goto out;
> +
> + regval = (ret & ~VCNL4040_ALS_CONF_PERS) |
> + FIELD_PREP(VCNL4040_ALS_CONF_PERS, index);
> + ret = i2c_smbus_write_word_data(data->client, VCNL4200_AL_CONF,
> + regval);
> +
> +out:
> + mutex_unlock(&data->vcnl4000_lock);
> + return ret;
> +}
> +
> +static ssize_t vcnl4040_read_ps_debounce_count(struct vcnl4000_data *data, int *val)
> +{
> + int ret;
> +
> + ret = i2c_smbus_read_word_data(data->client, VCNL4200_PS_CONF1);
> + if (ret < 0)
> + return ret;
> +
> + ret = FIELD_GET(VCNL4040_CONF1_PS_PERS, ret);
> +
> + if (ret >= ARRAY_SIZE(vcnl4200_ps_it_times))
> + return -EINVAL;
> +
> + *val = vcnl4040_ps_debounce_count[ret];
> +
> + return ret;
> +}
> +
> +static ssize_t vcnl4040_write_ps_debounce_count(struct vcnl4000_data *data, int val)
> +{
> + unsigned int i;
> + int ret, index = -1;
> + u16 regval;
> +
> + for (i = 0; i < ARRAY_SIZE(vcnl4040_ps_debounce_count); i++) {
> + if (val == vcnl4040_ps_debounce_count[i]) {
> + index = i;
> + break;
> + }
> + }
> +
> + if (index < 0)
> + return -EINVAL;
> +
> + mutex_lock(&data->vcnl4000_lock);
> +
> + ret = i2c_smbus_read_word_data(data->client, VCNL4200_PS_CONF1);
> + if (ret < 0)
> + goto out;
> +
> + regval = (ret & ~VCNL4040_CONF1_PS_PERS) |
> + FIELD_PREP(VCNL4040_CONF1_PS_PERS, index);
> + ret = i2c_smbus_write_word_data(data->client, VCNL4200_PS_CONF1,
> + regval);
> +
> +out:
> + mutex_unlock(&data->vcnl4000_lock);
> + return ret;
> +}
> +
> static int vcnl4000_read_raw(struct iio_dev *indio_dev,
> struct iio_chan_spec const *chan,
> int *val, int *val2, long mask)
> @@ -730,6 +835,21 @@ static int vcnl4000_read_raw(struct iio_dev *indio_dev,
> if (ret < 0)
> return ret;
> return IIO_VAL_INT_PLUS_MICRO;
> + case IIO_CHAN_INFO_DEBOUNCE_COUNT:
> + switch (chan->type) {
> + case IIO_LIGHT:
> + ret = vcnl4040_read_als_debounce_count(data, val);
> + break;
> + case IIO_PROXIMITY:
> + ret = vcnl4040_read_ps_debounce_count(data, val);
> + break;
> + default:
> + return -EINVAL;
> + }
> + if (ret < 0)
> + return ret;
> + return IIO_VAL_INT;
> +
> default:
> return -EINVAL;
> }
> @@ -753,6 +873,15 @@ static int vcnl4040_write_raw(struct iio_dev *indio_dev,
> default:
> return -EINVAL;
> }
> + case IIO_CHAN_INFO_DEBOUNCE_COUNT:
> + switch (chan->type) {
> + case IIO_LIGHT:
> + return vcnl4040_write_als_debounce_count(data, val);
> + case IIO_PROXIMITY:
> + return vcnl4040_write_ps_debounce_count(data, val);
> + default:
> + return -EINVAL;
> + }
> default:
> return -EINVAL;
> }
> @@ -791,6 +920,21 @@ static int vcnl4040_read_avail(struct iio_dev *indio_dev,
> }
> *type = IIO_VAL_INT_PLUS_MICRO;
> return IIO_AVAIL_LIST;
> + case IIO_CHAN_INFO_DEBOUNCE_COUNT:
> + switch (chan->type) {
> + case IIO_LIGHT:
> + *vals = (int *)vcnl4040_als_debounce_count;
> + *length = ARRAY_SIZE(vcnl4040_als_debounce_count);
> + break;
> + case IIO_PROXIMITY:
> + *vals = (int *)vcnl4040_ps_debounce_count;
> + *length = ARRAY_SIZE(vcnl4040_ps_debounce_count);
> + break;
> + default:
> + return -EINVAL;
> + }
> + *type = IIO_VAL_INT;
> + return IIO_AVAIL_LIST;
> default:
> return -EINVAL;
> }
> @@ -1504,15 +1648,19 @@ static const struct iio_chan_spec vcnl4040_channels[] = {
> .type = IIO_LIGHT,
> .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
> BIT(IIO_CHAN_INFO_SCALE) |
> - BIT(IIO_CHAN_INFO_INT_TIME),
> - .info_mask_separate_available = BIT(IIO_CHAN_INFO_INT_TIME),
> + BIT(IIO_CHAN_INFO_INT_TIME) |
> + BIT(IIO_CHAN_INFO_DEBOUNCE_COUNT),
> + .info_mask_separate_available = BIT(IIO_CHAN_INFO_INT_TIME) |
> + BIT(IIO_CHAN_INFO_DEBOUNCE_COUNT),
> .event_spec = vcnl4000_event_spec,
> .num_event_specs = ARRAY_SIZE(vcnl4000_event_spec),
> }, {
> .type = IIO_PROXIMITY,
> .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
> - BIT(IIO_CHAN_INFO_INT_TIME),
> - .info_mask_separate_available = BIT(IIO_CHAN_INFO_INT_TIME),
> + BIT(IIO_CHAN_INFO_INT_TIME) |
> + BIT(IIO_CHAN_INFO_DEBOUNCE_COUNT),
> + .info_mask_separate_available = BIT(IIO_CHAN_INFO_INT_TIME) |
> + BIT(IIO_CHAN_INFO_DEBOUNCE_COUNT),
> .ext_info = vcnl4000_ext_info,
> .event_spec = vcnl4040_event_spec,
> .num_event_specs = ARRAY_SIZE(vcnl4040_event_spec),
next prev parent reply other threads:[~2023-05-14 17:21 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-05-09 14:01 [PATCH v2 0/7] iio: light: vcnl4000: Add features for vncl4040/4200 Astrid Rost
2023-05-09 14:01 ` [PATCH v2 1/7] iio: light: vcnl4000: Add proximity irq for vcnl4200 Astrid Rost
2023-05-13 18:57 ` Jonathan Cameron
2023-05-09 14:01 ` [PATCH v2 2/7] iio: light: vcnl4000: Add proximity ps_it " Astrid Rost
2023-05-14 17:24 ` Jonathan Cameron
2023-05-09 14:01 ` [PATCH v2 3/7] iio: light: vcnl4000: Add als_it for vcnl4040/4200 Astrid Rost
2023-05-14 17:28 ` Jonathan Cameron
2023-05-09 14:01 ` [PATCH v2 4/7] iio: light: vcnl4000: add illumination irq vcnl4040/4200 Astrid Rost
2023-05-14 17:31 ` Jonathan Cameron
2023-05-09 14:01 ` [PATCH v2 5/7] iio: light: vcnl4000: Add debounce count for vcnl4040/4200 Astrid Rost
2023-05-14 17:37 ` Jonathan Cameron [this message]
2023-05-15 15:00 ` Astrid Rost
2023-05-09 14:01 ` [PATCH v2 6/7] iio: light: vcnl4000: Add oversampling_ratio for 4040/4200 Astrid Rost
2023-05-14 17:41 ` Jonathan Cameron
2023-05-15 14:55 ` Astrid Rost
2023-05-09 14:01 ` [PATCH v2 7/7] iio: light: vcnl4000: Add calibration bias " Astrid Rost
2023-05-14 17:44 ` Jonathan Cameron
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230514183748.256a210c@jic23-huawei \
--to=jic23@kernel.org \
--cc=astrid.rost@axis.com \
--cc=kernel@axis.com \
--cc=lars@metafoo.de \
--cc=linux-iio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox