From: Jonathan Cameron <jic23@kernel.org>
To: linux-iio@vger.kernel.org,
Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: "Lars-Peter Clausen" <lars@metafoo.de>,
"Michael Hennerich" <Michael.Hennerich@analog.com>,
"Nuno Sá" <nuno.sa@analog.com>,
"Alisa-Dariana Roman" <alisa.roman@analog.com>,
"Haibo Chen" <haibo.chen@nxp.com>,
"Sean Nyekjaer" <sean@geanix.com>,
"Andreas Klinger" <ak@it-klinger.de>,
"Jonathan Cameron" <Jonathan.Cameron@huawei.com>
Subject: [PATCH 3/8] iio: adc: ad7124: Switch from of specific to fwnode based property handling
Date: Sun, 18 Feb 2024 17:27:26 +0000 [thread overview]
Message-ID: <20240218172731.1023367-4-jic23@kernel.org> (raw)
In-Reply-To: <20240218172731.1023367-1-jic23@kernel.org>
From: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Using the generic firmware data access functions from property.h
provides a number of advantages:
1) Works with different firmware types.
2) Doesn't provide a 'bad' example for new IIO drivers.
3) Lets us use the new _scoped() loops with automatic reference count
cleanup for fwnode_handle
Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: Michael Hennerich <Michael.Hennerich@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
---
drivers/iio/adc/ad7124.c | 55 +++++++++++++++++-----------------------
1 file changed, 23 insertions(+), 32 deletions(-)
diff --git a/drivers/iio/adc/ad7124.c b/drivers/iio/adc/ad7124.c
index b9b206fcd748..e7b1d517d3de 100644
--- a/drivers/iio/adc/ad7124.c
+++ b/drivers/iio/adc/ad7124.c
@@ -14,7 +14,8 @@
#include <linux/kernel.h>
#include <linux/kfifo.h>
#include <linux/module.h>
-#include <linux/of.h>
+#include <linux/mod_devicetable.h>
+#include <linux/property.h>
#include <linux/regulator/consumer.h>
#include <linux/spi/spi.h>
@@ -807,22 +808,19 @@ static int ad7124_check_chip_id(struct ad7124_state *st)
return 0;
}
-static int ad7124_of_parse_channel_config(struct iio_dev *indio_dev,
- struct device_node *np)
+static int ad7124_parse_channel_config(struct iio_dev *indio_dev,
+ struct device *dev)
{
struct ad7124_state *st = iio_priv(indio_dev);
struct ad7124_channel_config *cfg;
struct ad7124_channel *channels;
- struct device_node *child;
struct iio_chan_spec *chan;
unsigned int ain[2], channel = 0, tmp;
int ret;
- st->num_channels = of_get_available_child_count(np);
- if (!st->num_channels) {
- dev_err(indio_dev->dev.parent, "no channel children\n");
- return -ENODEV;
- }
+ st->num_channels = device_get_child_node_count(dev);
+ if (!st->num_channels)
+ return dev_err_probe(dev, -ENODEV, "no channel children\n");
chan = devm_kcalloc(indio_dev->dev.parent, st->num_channels,
sizeof(*chan), GFP_KERNEL);
@@ -838,39 +836,38 @@ static int ad7124_of_parse_channel_config(struct iio_dev *indio_dev,
indio_dev->num_channels = st->num_channels;
st->channels = channels;
- for_each_available_child_of_node(np, child) {
+ device_for_each_child_node_scoped(dev, child) {
cfg = &st->channels[channel].cfg;
- ret = of_property_read_u32(child, "reg", &channel);
+ ret = fwnode_property_read_u32(child, "reg", &channel);
if (ret)
- goto err;
+ return ret;
- if (channel >= indio_dev->num_channels) {
- dev_err(indio_dev->dev.parent,
+ if (channel >= indio_dev->num_channels)
+ return dev_err_probe(dev, -EINVAL,
"Channel index >= number of channels\n");
- ret = -EINVAL;
- goto err;
- }
- ret = of_property_read_u32_array(child, "diff-channels",
- ain, 2);
+ ret = fwnode_property_read_u32_array(child, "diff-channels",
+ ain, 2);
if (ret)
- goto err;
+ return ret;
st->channels[channel].nr = channel;
st->channels[channel].ain = AD7124_CHANNEL_AINP(ain[0]) |
AD7124_CHANNEL_AINM(ain[1]);
- cfg->bipolar = of_property_read_bool(child, "bipolar");
+ cfg->bipolar = fwnode_property_read_bool(child, "bipolar");
- ret = of_property_read_u32(child, "adi,reference-select", &tmp);
+ ret = fwnode_property_read_u32(child, "adi,reference-select", &tmp);
if (ret)
cfg->refsel = AD7124_INT_REF;
else
cfg->refsel = tmp;
- cfg->buf_positive = of_property_read_bool(child, "adi,buffered-positive");
- cfg->buf_negative = of_property_read_bool(child, "adi,buffered-negative");
+ cfg->buf_positive =
+ fwnode_property_read_bool(child, "adi,buffered-positive");
+ cfg->buf_negative =
+ fwnode_property_read_bool(child, "adi,buffered-negative");
chan[channel] = ad7124_channel_template;
chan[channel].address = channel;
@@ -880,10 +877,6 @@ static int ad7124_of_parse_channel_config(struct iio_dev *indio_dev,
}
return 0;
-err:
- of_node_put(child);
-
- return ret;
}
static int ad7124_setup(struct ad7124_state *st)
@@ -943,9 +936,7 @@ static int ad7124_probe(struct spi_device *spi)
struct iio_dev *indio_dev;
int i, ret;
- info = of_device_get_match_data(&spi->dev);
- if (!info)
- info = (void *)spi_get_device_id(spi)->driver_data;
+ info = spi_get_device_match_data(spi);
if (!info)
return -ENODEV;
@@ -965,7 +956,7 @@ static int ad7124_probe(struct spi_device *spi)
if (ret < 0)
return ret;
- ret = ad7124_of_parse_channel_config(indio_dev, spi->dev.of_node);
+ ret = ad7124_parse_channel_config(indio_dev, &spi->dev);
if (ret < 0)
return ret;
--
2.43.2
next prev parent reply other threads:[~2024-02-18 17:27 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-02-18 17:27 [PATCH 0/8] IIO: Convert DT specific handling over to fwnode Jonathan Cameron
2024-02-18 17:27 ` [PATCH 1/8] iio: adc: fsl-imx25-gcq: Switch from of specific handing to fwnode based Jonathan Cameron
2024-02-18 17:27 ` [PATCH 2/8] iio: adc: fsl-imx25-gcq: Use devm_* and dev_err_probe() to simplify probe Jonathan Cameron
2024-02-18 17:27 ` Jonathan Cameron [this message]
2024-02-19 9:24 ` [PATCH 3/8] iio: adc: ad7124: Switch from of specific to fwnode based property handling Nuno Sá
2024-02-19 11:59 ` Andy Shevchenko
2024-02-19 11:58 ` Andy Shevchenko
2024-02-24 15:19 ` Jonathan Cameron
2024-02-18 17:27 ` [PATCH 4/8] iio: adc: ad7292: Switch from of specific to fwnode " Jonathan Cameron
2024-02-19 9:26 ` Nuno Sá
2024-02-18 17:27 ` [PATCH 5/8] iio: adc: ad7192: Convert " Jonathan Cameron
2024-02-19 9:30 ` Nuno Sá
2024-02-19 12:02 ` Andy Shevchenko
2024-02-18 17:27 ` [PATCH 6/8] iio: accel: mma8452: Switch " Jonathan Cameron
2024-02-23 11:10 ` Bough Chen
2024-02-18 17:27 ` [PATCH 7/8] iio: accel: fxls8962af: Switch from of specific to fwnode based properties Jonathan Cameron
2024-02-19 12:03 ` Andy Shevchenko
2024-02-18 17:27 ` [PATCH 8/8] iio: adc: hx711: Switch from of specific to fwnode property handling Jonathan Cameron
2024-02-19 12:06 ` Andy Shevchenko
2024-02-19 12:06 ` [PATCH 0/8] IIO: Convert DT specific handling over to fwnode Andy Shevchenko
2024-02-24 15:31 ` Jonathan Cameron
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240218172731.1023367-4-jic23@kernel.org \
--to=jic23@kernel.org \
--cc=Jonathan.Cameron@huawei.com \
--cc=Michael.Hennerich@analog.com \
--cc=ak@it-klinger.de \
--cc=alisa.roman@analog.com \
--cc=andriy.shevchenko@linux.intel.com \
--cc=haibo.chen@nxp.com \
--cc=lars@metafoo.de \
--cc=linux-iio@vger.kernel.org \
--cc=nuno.sa@analog.com \
--cc=sean@geanix.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox