[PATCH 7/8] iio: accel: fxls8962af: Switch from of specific to fwnode based properties.

[Jonathan Cameron <jic23@kernel.org>]

From: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Only the irq was retrieved using an of specific accessor. Switch to the
fwnode equivalent and adjust headers. Also include missing mod_devicetable.h
and irq.h.

Cc: Sean Nyekjaer <sean@geanix.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
---
 drivers/iio/accel/fxls8962af-core.c | 10 ++++++----
 1 file changed, 6 insertions(+), 4 deletions(-)

diff --git a/drivers/iio/accel/fxls8962af-core.c b/drivers/iio/accel/fxls8962af-core.c
index be8a15cb945f..4fbc01bda62e 100644
--- a/drivers/iio/accel/fxls8962af-core.c
+++ b/drivers/iio/accel/fxls8962af-core.c
@@ -15,9 +15,11 @@
 #include <linux/bits.h>
 #include <linux/bitfield.h>
 #include <linux/i2c.h>
+#include <linux/irq.h>
 #include <linux/module.h>
-#include <linux/of_irq.h>
+#include <linux/mod_devicetable.h>
 #include <linux/pm_runtime.h>
+#include <linux/property.h>
 #include <linux/regulator/consumer.h>
 #include <linux/regmap.h>
 
@@ -1062,12 +1064,12 @@ static void fxls8962af_pm_disable(void *dev_ptr)
 	fxls8962af_standby(iio_priv(indio_dev));
 }
 
-static void fxls8962af_get_irq(struct device_node *of_node,
+static void fxls8962af_get_irq(struct device *dev,
 			       enum fxls8962af_int_pin *pin)
 {
 	int irq;
 
-	irq = of_irq_get_byname(of_node, "INT2");
+	irq = fwnode_irq_get_byname(dev_fwnode(dev), "INT2");
 	if (irq > 0) {
 		*pin = FXLS8962AF_PIN_INT2;
 		return;
@@ -1086,7 +1088,7 @@ static int fxls8962af_irq_setup(struct iio_dev *indio_dev, int irq)
 	u8 int_pin_sel;
 	int ret;
 
-	fxls8962af_get_irq(dev->of_node, &int_pin);
+	fxls8962af_get_irq(dev, &int_pin);
 	switch (int_pin) {
 	case FXLS8962AF_PIN_INT1:
 		int_pin_sel = FXLS8962AF_INT_PIN_SEL_INT1;
-- 
2.43.2