From: Jonathan Cameron <jic23@kernel.org>
To: Vasiliy Doylov via B4 Relay
<devnull+nekodevelopper.gmail.com@kernel.org>
Cc: nekodevelopper@gmail.com, Lars-Peter Clausen <lars@metafoo.de>,
Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
linux-iio@vger.kernel.org, linux-kernel@vger.kernel.org,
devicetree@vger.kernel.org
Subject: Re: [PATCH v3 4/5] iio: accel: mc3230: add multiple devices support
Date: Sun, 12 Jan 2025 16:32:21 +0000 [thread overview]
Message-ID: <20250112163221.4782ad53@jic23-huawei> (raw)
In-Reply-To: <20250112-mainlining-mc3510c-v3-4-9ee6520ab69d@gmail.com>
On Sun, 12 Jan 2025 15:25:38 +0300
Vasiliy Doylov via B4 Relay <devnull+nekodevelopper.gmail.com@kernel.org> wrote:
> From: Vasiliy Doylov <nekodevelopper@gmail.com>
>
> This patch allows to add new devices to this driver.
>
> Signed-off-by: Vasiliy Doylov <nekodevelopper@gmail.com>
One comment inline.
Jonathan
> ---
> drivers/iio/accel/mc3230.c | 50 ++++++++++++++++++++++++++++++++++------------
> 1 file changed, 37 insertions(+), 13 deletions(-)
>
> diff --git a/drivers/iio/accel/mc3230.c b/drivers/iio/accel/mc3230.c
> index ba30c904d3f67002deeb3ca5a7e12bfae312e05f..1b58f3ea50655b6563a78a2531b16a8088e8f8d5 100644
> --- a/drivers/iio/accel/mc3230.c
> +++ b/drivers/iio/accel/mc3230.c
> @@ -22,20 +22,29 @@
> #define MC3230_MODE_OPCON_STANDBY 0x03
>
> #define MC3230_REG_CHIP_ID 0x18
> -#define MC3230_CHIP_ID 0x01
> -
> #define MC3230_REG_PRODUCT_CODE 0x3b
> -#define MC3230_PRODUCT_CODE 0x19
>
> /*
> * The accelerometer has one measurement range:
> *
> * -1.5g - +1.5g (8-bit, signed)
> *
> - * scale = (1.5 + 1.5) * 9.81 / (2^8 - 1) = 0.115411765
> */
>
> -static const int mc3230_nscale = 115411765;
> +struct mc3230_chip_info {
> + const u8 chip_id;
> + const char *name;
> + const u8 product_code;
Keep chip_id and product_code together. They are coming from
the same place and closely related fields. Original
ordering in v1 made more sense than this.
> + const int scale;
> +};
> +
> +static struct mc3230_chip_info mc3230_chip_info = {
> + .chip_id = 0x01,
> + .name = "mc3230",
> + .product_code = 0x19,
> + /* (1.5 + 1.5) * 9.81 / (2^8 - 1) = 0.115411765 */
> + .scale = 115411765,
> +};
>
> #define MC3230_CHANNEL(reg, axis) { \
> .type = IIO_ACCEL, \
> @@ -48,6 +57,7 @@ static const int mc3230_nscale = 115411765;
> }
>
> struct mc3230_data {
> + const struct mc3230_chip_info *chip_info;
> struct i2c_client *client;
> struct iio_mount_matrix orientation;
> };
> @@ -111,7 +121,7 @@ static int mc3230_read_raw(struct iio_dev *indio_dev,
> return IIO_VAL_INT;
> case IIO_CHAN_INFO_SCALE:
> *val = 0;
> - *val2 = mc3230_nscale;
> + *val2 = data->chip_info->scale;
> return IIO_VAL_INT_PLUS_NANO;
> default:
> return -EINVAL;
> @@ -127,15 +137,28 @@ static int mc3230_probe(struct i2c_client *client)
> int ret;
> struct iio_dev *indio_dev;
> struct mc3230_data *data;
> + const struct mc3230_chip_info *chip_info;
> +
> + chip_info = i2c_get_match_data(client);
> + if (chip_info == NULL) {
> + dev_err(&client->dev, "failed to get match data");
> + return -ENODATA;
> + }
>
> /* First check chip-id and product-id */
> ret = i2c_smbus_read_byte_data(client, MC3230_REG_CHIP_ID);
> - if (ret != MC3230_CHIP_ID)
> - return (ret < 0) ? ret : -ENODEV;
> + if (ret != chip_info->chip_id) {
> + dev_info(&client->dev,
> + "chip id check fail: 0x%x != 0x%x !\n",
> + ret, chip_info->chip_id);
> + }
>
> ret = i2c_smbus_read_byte_data(client, MC3230_REG_PRODUCT_CODE);
> - if (ret != MC3230_PRODUCT_CODE)
> - return (ret < 0) ? ret : -ENODEV;
> + if (ret != chip_info->product_code) {
> + dev_info(&client->dev,
> + "product code check fail: 0x%x != 0x%x !\n",
> + ret, chip_info->product_code);
> + }
>
> indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data));
> if (!indio_dev) {
> @@ -144,11 +167,12 @@ static int mc3230_probe(struct i2c_client *client)
> }
>
> data = iio_priv(indio_dev);
> + data->chip_info = chip_info;
> data->client = client;
> i2c_set_clientdata(client, indio_dev);
>
> indio_dev->info = &mc3230_info;
> - indio_dev->name = "mc3230";
> + indio_dev->name = chip_info->name;
> indio_dev->modes = INDIO_DIRECT_MODE;
> indio_dev->channels = mc3230_channels;
> indio_dev->num_channels = ARRAY_SIZE(mc3230_channels);
> @@ -200,13 +224,13 @@ static int mc3230_resume(struct device *dev)
> static DEFINE_SIMPLE_DEV_PM_OPS(mc3230_pm_ops, mc3230_suspend, mc3230_resume);
>
> static const struct i2c_device_id mc3230_i2c_id[] = {
> - { "mc3230" },
> + { "mc3230", (kernel_ulong_t)&mc3230_chip_info },
> {}
> };
> MODULE_DEVICE_TABLE(i2c, mc3230_i2c_id);
>
> static const struct of_device_id mc3230_of_match[] = {
> - { .compatible = "mcube,mc3230" },
> + { .compatible = "mcube,mc3230", &mc3230_chip_info },
> {}
> };
> MODULE_DEVICE_TABLE(of, mc3230_of_match);
>
next prev parent reply other threads:[~2025-01-12 16:32 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-01-12 12:25 [PATCH v3 0/5] iio: accel: mc3230: add mount matrix, of match and mc3510c support Vasiliy Doylov via B4 Relay
2025-01-12 12:25 ` [PATCH v3 1/5] dt-bindings: iio: accel: mc3230: document mc3510c Vasiliy Doylov via B4 Relay
2025-01-13 8:49 ` Krzysztof Kozlowski
2025-01-12 12:25 ` [PATCH v3 2/5] iio: accel: mc3230: add mount matrix support Vasiliy Doylov via B4 Relay
2025-01-12 16:28 ` Jonathan Cameron
2025-01-12 12:25 ` [PATCH v3 3/5] iio: accel: mc3230: add OF match table Vasiliy Doylov via B4 Relay
2025-01-12 16:29 ` Jonathan Cameron
2025-01-12 16:38 ` Vasiliy Doylov
2025-01-12 12:25 ` [PATCH v3 4/5] iio: accel: mc3230: add multiple devices support Vasiliy Doylov via B4 Relay
2025-01-12 16:32 ` Jonathan Cameron [this message]
2025-01-13 8:51 ` Krzysztof Kozlowski
2025-01-12 12:25 ` [PATCH v3 5/5] iio: accel: mc3230: add mc3510c support Vasiliy Doylov via B4 Relay
2025-01-12 16:34 ` Jonathan Cameron
2025-01-13 8:51 ` Krzysztof Kozlowski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250112163221.4782ad53@jic23-huawei \
--to=jic23@kernel.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=devnull+nekodevelopper.gmail.com@kernel.org \
--cc=krzk+dt@kernel.org \
--cc=lars@metafoo.de \
--cc=linux-iio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=nekodevelopper@gmail.com \
--cc=robh@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox