[PATCH v0 10/14] iio: magnetometer: ak8975: switch to using managed resources

[Andy Shevchenko <andriy.shevchenko@linux.intel.com>]

Switch the driver to use managed resources (devm_*) which simplifier
error handling and allows removing ak8975_remove() method from
the driver.

Note, on error path we now also set mode to POWER_DOWN state which is
fine. Even if the device is in that mode, there is no problem to set
that mode again, it should be no-op.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
---
 drivers/iio/magnetometer/ak8975.c | 59 ++++++++++++++-----------------
 1 file changed, 26 insertions(+), 33 deletions(-)

diff --git a/drivers/iio/magnetometer/ak8975.c b/drivers/iio/magnetometer/ak8975.c
index 53158ffd173b..d666d9d171bd 100644
--- a/drivers/iio/magnetometer/ak8975.c
+++ b/drivers/iio/magnetometer/ak8975.c
@@ -888,9 +888,16 @@ static irqreturn_t ak8975_handle_trigger(int irq, void *p)
 	return IRQ_HANDLED;
 }
 
+static void devm_ak8975_power_off(void *data)
+{
+	ak8975_set_mode(data, POWER_DOWN);
+	ak8975_power_off(data);
+}
+
 static int ak8975_probe(struct i2c_client *client)
 {
 	const struct i2c_device_id *id = i2c_client_get_device_id(client);
+	struct device *dev = &client->dev;
 	struct ak8975_data *data;
 	struct iio_dev *indio_dev;
 	struct gpio_desc *eoc_gpiod;
@@ -958,10 +965,14 @@ static int ak8975_probe(struct i2c_client *client)
 	if (ret)
 		return ret;
 
+	ret = devm_add_action_or_reset(dev, devm_ak8975_power_off, data);
+	if (ret)
+		return ret;
+
 	ret = ak8975_who_i_am(client, data->def->type);
 	if (ret) {
 		dev_err(&client->dev, "Unexpected device\n");
-		goto power_off;
+		return ret;
 	}
 	dev_dbg(&client->dev, "Asahi compass chip %s\n", name);
 
@@ -969,10 +980,13 @@ static int ak8975_probe(struct i2c_client *client)
 	ret = ak8975_setup(client);
 	if (ret) {
 		dev_err(&client->dev, "%s initialization fails\n", name);
-		goto power_off;
+		return ret;
 	}
 
-	mutex_init(&data->lock);
+	ret = devm_mutex_init(dev, &data->lock);
+	if (ret)
+		return ret;
+
 	indio_dev->channels = ak8975_channels;
 	indio_dev->num_channels = ARRAY_SIZE(ak8975_channels);
 	indio_dev->info = &ak8975_info;
@@ -980,52 +994,32 @@ static int ak8975_probe(struct i2c_client *client)
 	indio_dev->modes = INDIO_DIRECT_MODE;
 	indio_dev->name = name;
 
-	ret = iio_triggered_buffer_setup(indio_dev, NULL, ak8975_handle_trigger,
-					 NULL);
+	ret = devm_iio_triggered_buffer_setup(dev, indio_dev, NULL,
+					      ak8975_handle_trigger, NULL);
 	if (ret) {
 		dev_err(&client->dev, "triggered buffer setup failed\n");
-		goto power_off;
+		return ret;
 	}
 
-	ret = iio_device_register(indio_dev);
+	ret = devm_iio_device_register(dev, indio_dev);
 	if (ret) {
 		dev_err(&client->dev, "device register failed\n");
-		goto cleanup_buffer;
+		return ret;
 	}
 
 	/* Enable runtime PM */
-	pm_runtime_get_noresume(&client->dev);
-	pm_runtime_set_active(&client->dev);
-	pm_runtime_enable(&client->dev);
+	ret = devm_pm_runtime_set_active_enabled(dev);
+	if (ret)
+		return ret;
+
 	/*
 	 * The device comes online in 500us, so add two orders of magnitude
 	 * of delay before autosuspending: 50 ms.
 	 */
 	pm_runtime_set_autosuspend_delay(&client->dev, 50);
 	pm_runtime_use_autosuspend(&client->dev);
-	pm_runtime_put(&client->dev);
 
 	return 0;
-
-cleanup_buffer:
-	iio_triggered_buffer_cleanup(indio_dev);
-power_off:
-	ak8975_power_off(data);
-	return ret;
-}
-
-static void ak8975_remove(struct i2c_client *client)
-{
-	struct iio_dev *indio_dev = i2c_get_clientdata(client);
-	struct ak8975_data *data = iio_priv(indio_dev);
-
-	pm_runtime_get_sync(&client->dev);
-	pm_runtime_put_noidle(&client->dev);
-	pm_runtime_disable(&client->dev);
-	iio_device_unregister(indio_dev);
-	iio_triggered_buffer_cleanup(indio_dev);
-	ak8975_set_mode(data, POWER_DOWN);
-	ak8975_power_off(data);
 }
 
 static int ak8975_runtime_suspend(struct device *dev)
@@ -1119,7 +1113,6 @@ static struct i2c_driver ak8975_driver = {
 		.acpi_match_table = ak_acpi_match,
 	},
 	.probe		= ak8975_probe,
-	.remove		= ak8975_remove,
 	.id_table	= ak8975_id,
 };
 module_i2c_driver(ak8975_driver);
-- 
2.50.1