[PATCH v5 0/6] iio: dac: ad5504: bindings, cleanups, locking, and scale fixes

[PATCH v5 0/6] iio: dac: ad5504: bindings, cleanups, locking, and scale fixes

[Taha Ed-Dafili]

Jonathan Cameron applied patches 2 (sort headers alphabetically) and 4
(introduce local dev pointer) from v3 directly to iio/testing. This
series rebases on top of that state and does not re-send those
patches.

This v5 series addresses feedback from the v4 review by Jonathan
Cameron, Andy Shevchenko and Uwe Kleine-König:

* Drop <linux/mod_devicetable.h> — now covered by spi.h (Andy, Uwe)
* Add blank lines after all guard() call sites (Andy)
* Rename macro to AD5504_VREF_ACPI_DEFAULT_mV (Andy)
* Switch to is_acpi_device_node(dev_fwnode(dev)) (Andy)
* Use (MICRO / MILLI) for microvolt-to-millivolt conversions (Andy)
* Trim all commit messages (Andy, Jonathan)
* Reorder ACPI/DT separation before pdata removal to avoid an
  intermediate commit that hard-fails probe on regulator-less
  systems (issue raised by Andy)

Testing:
Re-verified on ARM64 Raspberry Pi 5 (BCM2712) using a custom Device
Tree overlay on spi10, without physical AD5504 hardware. All test
cases from v4 pass unchanged with the v5 code:

60V path (output-range-microvolt = <0 60000000>):
$ cat /sys/bus/iio/devices/iio:device0/out_voltage_scale
14.648437500  (60000 mV / 4096)

30V path (output-range-microvolt = <0 30000000>):
$ cat /sys/bus/iio/devices/iio:device0/out_voltage_scale
7.324218750   (30000 mV / 4096)

Invalid range (output-range-microvolt = <0 70000000>):
[   94.762850] ad5504 spi10.0: error -EINVAL: Invalid output-range-microvolt
[   94.762857] ad5504 spi10.0: probe with driver ad5504 failed with error -22

Backward compatibility (no output-range-microvolt, vcc-supply = 60V):
$ cat /sys/bus/iio/devices/iio:device0/out_voltage_scale
14.648437500  (60000 mV / 4096 via regulator fallback)

Powerdown sysfs read/write and powerdown mode switching (20kohm_to_gnd,
three_state) verified on all four channels without errors.

Previous versions:
v4: https://lore.kernel.org/linux-iio/20260817211118.21833-1-0rayn.dev@gmail.com/
v3: https://lore.kernel.org/linux-iio/20260509142047.30302-1-0rayn.dev@gmail.com/
v2: https://lore.kernel.org/linux-iio/20260310174835.24209-1-0rayn.dev@gmail.com/
v1: https://lore.kernel.org/linux-iio/20260212181955.42724-1-0rayn.dev@gmail.com/

Thank you to Jonathan Cameron, David Lechner, Andy Shevchenko, Nuno Sá,
Krzysztof Kozlowski, Conor Dooley and Uwe Kleine-König for the
continued reviews.

Taha Ed-Dafili (6):
  dt-bindings: iio: dac: ad5504: add output-range and missing gpios
  iio: dac: ad5504: Align headers with IWYU principle
  iio: dac: ad5504: separate ACPI and DT paths
  iio: dac: ad5504: remove legacy platform data support
  iio: dac: ad5504: introduce local lock to protect state and spi
    transfers
  iio: dac: ad5504: support scale via output-range-microvolt property

 .../bindings/iio/dac/adi,ad5504.yaml          | 39 ++++++++-
 drivers/iio/dac/ad5504.c                      | 82 +++++++++++++++----
 include/linux/iio/dac/ad5504.h                | 15 ----
 3 files changed, 103 insertions(+), 33 deletions(-)
 delete mode 100644 include/linux/iio/dac/ad5504.h

-- 
2.55.0

[PATCH v5 1/6] dt-bindings: iio: dac: ad5504: add output-range and missing gpios

[Taha Ed-Dafili]

The AD5504 output range (0-30V or 0-60V) is determined by the R_SEL pin.

Use standard output-range-microvolt and range-sel-gpios properties to
describe the hardware configuration of the R_SEL pin. Ensure mutual
exclusivity using the not/required logic. Additionally, add missing
vlogic-supply, clr-gpios, ldac-gpios and datasheet links, and provide
a complete usage example.

Signed-off-by: Taha Ed-Dafili <0rayn.dev@gmail.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
---
 .../bindings/iio/dac/adi,ad5504.yaml          | 39 ++++++++++++++++++-
 1 file changed, 38 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/iio/dac/adi,ad5504.yaml b/Documentation/devicetree/bindings/iio/dac/adi,ad5504.yaml
index 9c2c038683b4..e0123dceaa33 100644
--- a/Documentation/devicetree/bindings/iio/dac/adi,ad5504.yaml
+++ b/Documentation/devicetree/bindings/iio/dac/adi,ad5504.yaml
@@ -10,8 +10,10 @@ maintainers:
   - Lars-Peter Clausen <lars@metafoo.de>
   - Jonathan Cameron <jic23@kernel.org>
 
-description:
+description: |
   High voltage (up to 60V) DACs with temperature sensor alarm function
+  https://www.analog.com/media/en/technical-documentation/data-sheets/ad5504.pdf
+  https://www.analog.com/media/en/technical-documentation/data-sheets/ad5501.pdf
 
 properties:
   compatible:
@@ -27,6 +29,29 @@ properties:
     maxItems: 1
 
   vcc-supply: true
+  vlogic-supply: true
+
+  output-range-microvolt:
+    description: |
+      Specify the channel output full scale range. The R_SEL pin
+      determines if the range is 0-30V or 0-60V.
+    items:
+      - const: 0
+      - enum: [30000000, 60000000]
+    default: [0, 60000000]
+
+  range-sel-gpios:
+    description:
+      GPIO connected to the R_SEL pin to select the output voltage range.
+    maxItems: 1
+
+  clr-gpios:
+    description: GPIO that controls the /CLR pin (active low).
+    maxItems: 1
+
+  ldac-gpios:
+    description: GPIO that controls the /LDAC pin (active low).
+    maxItems: 1
 
 additionalProperties: false
 
@@ -34,9 +59,17 @@ required:
   - compatible
   - reg
 
+allOf:
+  - not:
+      required:
+        - range-sel-gpios
+        - output-range-microvolt
+
 examples:
   - |
     #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/gpio/gpio.h>
+
     spi {
         #address-cells = <1>;
         #size-cells = <0>;
@@ -45,6 +78,10 @@ examples:
             compatible = "adi,ad5504";
             vcc-supply = <&dac_vcc>;
             interrupts = <55 IRQ_TYPE_EDGE_FALLING>;
+
+            output-range-microvolt = <0 60000000>;
+            clr-gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
+            ldac-gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
         };
     };
 ...
-- 
2.55.0

[PATCH v5 2/6] iio: dac: ad5504: Align headers with IWYU principle

[Taha Ed-Dafili]

Update the header inclusions to follow the IWYU principle and ensure
they are sorted alphabetically:

- Remove <linux/fs.h>, <linux/slab.h>, and <linux/kernel.h> as they
  are unused. The driver relies on devm_ managed allocations, so slab
  is not required.
- Replace <linux/bitops.h> with <linux/bits.h> as only the BIT() and
  GENMASK() macros are used.
- Add <linux/errno.h> and <linux/types.h> for error codes and data types.
- Add <asm/byteorder.h> for cpu_to_be16().
- Add <linux/array_size.h> for ARRAY_SIZE().
- Add <linux/kstrtox.h> for string to integer conversions.
- Replaced <linux/device.h> with <linux/dev_printk.h>

Signed-off-by: Taha Ed-Dafili <0rayn.dev@gmail.com>
---
 drivers/iio/dac/ad5504.c | 13 ++++++++-----
 1 file changed, 8 insertions(+), 5 deletions(-)

diff --git a/drivers/iio/dac/ad5504.c b/drivers/iio/dac/ad5504.c
index ad1a74678cf2..5c9c66b04154 100644
--- a/drivers/iio/dac/ad5504.c
+++ b/drivers/iio/dac/ad5504.c
@@ -5,22 +5,25 @@
  * Copyright 2011 Analog Devices Inc.
  */
 
-#include <linux/bitops.h>
-#include <linux/device.h>
-#include <linux/fs.h>
+#include <linux/array_size.h>
+#include <linux/bits.h>
+#include <linux/dev_printk.h>
+#include <linux/errno.h>
 #include <linux/interrupt.h>
-#include <linux/kernel.h>
+#include <linux/kstrtox.h>
 #include <linux/module.h>
 #include <linux/regulator/consumer.h>
-#include <linux/slab.h>
 #include <linux/spi/spi.h>
 #include <linux/sysfs.h>
+#include <linux/types.h>
 
 #include <linux/iio/dac/ad5504.h>
 #include <linux/iio/events.h>
 #include <linux/iio/iio.h>
 #include <linux/iio/sysfs.h>
 
+#include <asm/byteorder.h>
+
 #define AD5504_RES_MASK			GENMASK(11, 0)
 #define AD5504_CMD_READ			BIT(15)
 #define AD5504_CMD_WRITE		0
-- 
2.55.0

[PATCH v5 3/6] iio: dac: ad5504: separate ACPI and DT paths

[Taha Ed-Dafili]

The driver relied on a fragile -ENODEV check from the regulator
framework to bypass voltage configuration on ACPI platforms, sharing
the same fallback path as legacy pdata.

Fork probe on is_acpi_device_node() to explicitly handle each path.
On ACPI, skip the regulator and use a fixed 60V default via
AD5504_VREF_ACPI_DEFAULT_mV. The pdata fallback remains for non-ACPI
systems in this commit; it is removed in the next.

Signed-off-by: Taha Ed-Dafili <0rayn.dev@gmail.com>
---
 drivers/iio/dac/ad5504.c | 29 ++++++++++++++++++++---------
 1 file changed, 20 insertions(+), 9 deletions(-)

diff --git a/drivers/iio/dac/ad5504.c b/drivers/iio/dac/ad5504.c
index 5c9c66b04154..6f70c57c7a82 100644
--- a/drivers/iio/dac/ad5504.c
+++ b/drivers/iio/dac/ad5504.c
@@ -5,6 +5,7 @@
  * Copyright 2011 Analog Devices Inc.
  */
 
+#include <linux/acpi.h>
 #include <linux/array_size.h>
 #include <linux/bits.h>
 #include <linux/dev_printk.h>
@@ -12,10 +13,12 @@
 #include <linux/interrupt.h>
 #include <linux/kstrtox.h>
 #include <linux/module.h>
+#include <linux/property.h>
 #include <linux/regulator/consumer.h>
 #include <linux/spi/spi.h>
 #include <linux/sysfs.h>
 #include <linux/types.h>
+#include <linux/units.h>
 
 #include <linux/iio/dac/ad5504.h>
 #include <linux/iio/events.h>
@@ -24,6 +27,10 @@
 
 #include <asm/byteorder.h>
 
+/*
+ * In case of ACPI, we use the 60 V as default voltage reference.
+ */
+#define AD5504_VREF_ACPI_DEFAULT_mV	(60 * MILLI)
 #define AD5504_RES_MASK			GENMASK(11, 0)
 #define AD5504_CMD_READ			BIT(15)
 #define AD5504_CMD_WRITE		0
@@ -285,16 +292,20 @@ static int ad5504_probe(struct spi_device *spi)
 
 	st = iio_priv(indio_dev);
 
-	ret = devm_regulator_get_enable_read_voltage(dev, "vcc");
-	if (ret < 0 && ret != -ENODEV)
-		return ret;
-	if (ret == -ENODEV) {
-		if (pdata->vref_mv)
-			st->vref_mv = pdata->vref_mv;
-		else
-			dev_warn(dev, "reference voltage unspecified\n");
+	if (is_acpi_device_node(dev_fwnode(dev))) {
+		st->vref_mv = AD5504_VREF_ACPI_DEFAULT_mV;
 	} else {
-		st->vref_mv = ret / 1000;
+		ret = devm_regulator_get_enable_read_voltage(dev, "vcc");
+		if (ret < 0 && ret != -ENODEV)
+			return ret;
+		if (ret == -ENODEV) {
+			if (pdata->vref_mv)
+				st->vref_mv = pdata->vref_mv;
+			else
+				dev_warn(dev, "reference voltage unspecified\n");
+		} else {
+			st->vref_mv = ret / 1000;
+		}
 	}
 
 	st->spi = spi;
-- 
2.55.0

[PATCH v5 4/6] iio: dac: ad5504: remove legacy platform data support

[Taha Ed-Dafili]

The AD5504 driver has no in-tree users of its legacy platform data
support. Now that ACPI has its own explicit path, non-ACPI systems can
safely treat the vcc regulator as mandatory.

Drop the ad5504_platform_data structure, remove the fallback logic
from probe, and delete include/linux/iio/dac/ad5504.h.

Signed-off-by: Taha Ed-Dafili <0rayn.dev@gmail.com>
---
 drivers/iio/dac/ad5504.c       | 17 +++++------------
 include/linux/iio/dac/ad5504.h | 15 ---------------
 2 files changed, 5 insertions(+), 27 deletions(-)
 delete mode 100644 include/linux/iio/dac/ad5504.h

diff --git a/drivers/iio/dac/ad5504.c b/drivers/iio/dac/ad5504.c
index 6f70c57c7a82..799726eafdf2 100644
--- a/drivers/iio/dac/ad5504.c
+++ b/drivers/iio/dac/ad5504.c
@@ -20,7 +20,6 @@
 #include <linux/types.h>
 #include <linux/units.h>
 
-#include <linux/iio/dac/ad5504.h>
 #include <linux/iio/events.h>
 #include <linux/iio/iio.h>
 #include <linux/iio/sysfs.h>
@@ -281,7 +280,6 @@ static const struct iio_chan_spec ad5504_channels[] = {
 static int ad5504_probe(struct spi_device *spi)
 {
 	struct device *dev = &spi->dev;
-	const struct ad5504_platform_data *pdata = dev_get_platdata(dev);
 	struct iio_dev *indio_dev;
 	struct ad5504_state *st;
 	int ret;
@@ -296,16 +294,11 @@ static int ad5504_probe(struct spi_device *spi)
 		st->vref_mv = AD5504_VREF_ACPI_DEFAULT_mV;
 	} else {
 		ret = devm_regulator_get_enable_read_voltage(dev, "vcc");
-		if (ret < 0 && ret != -ENODEV)
-			return ret;
-		if (ret == -ENODEV) {
-			if (pdata->vref_mv)
-				st->vref_mv = pdata->vref_mv;
-			else
-				dev_warn(dev, "reference voltage unspecified\n");
-		} else {
-			st->vref_mv = ret / 1000;
-		}
+		if (ret < 0)
+			return dev_err_probe(dev, ret,
+					     "Failed to get vcc regulator\n");
+
+		st->vref_mv = ret / 1000;
 	}
 
 	st->spi = spi;
diff --git a/include/linux/iio/dac/ad5504.h b/include/linux/iio/dac/ad5504.h
deleted file mode 100644
index 9f23c90486ee..000000000000
--- a/include/linux/iio/dac/ad5504.h
+++ /dev/null
@@ -1,15 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * AD5504 SPI DAC driver
- *
- * Copyright 2011 Analog Devices Inc.
- */
-
-#ifndef SPI_AD5504_H_
-#define SPI_AD5504_H_
-
-struct ad5504_platform_data {
-	u16				vref_mv;
-};
-
-#endif /* SPI_AD5504_H_ */
-- 
2.55.0

[PATCH v5 5/6] iio: dac: ad5504: introduce local lock to protect state and spi transfers

[Taha Ed-Dafili]

The driver lacks locking, exposing concurrent access to the shared DMA
SPI buffers, the non-atomic CTRL+NOOP write sequence in powerdown, and
the pwr_down_mask/pwr_down_mode state variables.

Introduce a mutex via devm_mutex_init() and guard(mutex) at the IIO
callbacks to serialize access. In read_raw() and write_raw(), scope the
lock to IIO_CHAN_INFO_RAW only since IIO_CHAN_INFO_SCALE reads vref_mv
which is immutable after probe.

Signed-off-by: Taha Ed-Dafili <0rayn.dev@gmail.com>
---
 drivers/iio/dac/ad5504.c | 26 ++++++++++++++++++++++++--
 1 file changed, 24 insertions(+), 2 deletions(-)

diff --git a/drivers/iio/dac/ad5504.c b/drivers/iio/dac/ad5504.c
index 799726eafdf2..489d2e03e9f6 100644
--- a/drivers/iio/dac/ad5504.c
+++ b/drivers/iio/dac/ad5504.c
@@ -8,11 +8,13 @@
 #include <linux/acpi.h>
 #include <linux/array_size.h>
 #include <linux/bits.h>
+#include <linux/cleanup.h>
 #include <linux/dev_printk.h>
 #include <linux/errno.h>
 #include <linux/interrupt.h>
 #include <linux/kstrtox.h>
 #include <linux/module.h>
+#include <linux/mutex.h>
 #include <linux/property.h>
 #include <linux/regulator/consumer.h>
 #include <linux/spi/spi.h>
@@ -55,10 +57,12 @@
  * @pwr_down_mask:	power down mask
  * @pwr_down_mode:	current power down mode
  * @data:		transfer buffer
+ * @lock:		lock to protect state and spi transfers
  */
 struct ad5504_state {
 	struct spi_device		*spi;
 	struct regulator		*reg;
+	struct mutex			lock;
 	unsigned short			vref_mv;
 	unsigned			pwr_down_mask;
 	unsigned			pwr_down_mode;
@@ -109,7 +113,9 @@ static int ad5504_read_raw(struct iio_dev *indio_dev,
 	int ret;
 
 	switch (m) {
-	case IIO_CHAN_INFO_RAW:
+	case IIO_CHAN_INFO_RAW: {
+		guard(mutex)(&st->lock);
+
 		ret = ad5504_spi_read(st, chan->address);
 		if (ret < 0)
 			return ret;
@@ -117,6 +123,7 @@ static int ad5504_read_raw(struct iio_dev *indio_dev,
 		*val = ret;
 
 		return IIO_VAL_INT;
+	}
 	case IIO_CHAN_INFO_SCALE:
 		*val = st->vref_mv;
 		*val2 = chan->scan_type.realbits;
@@ -134,11 +141,14 @@ static int ad5504_write_raw(struct iio_dev *indio_dev,
 	struct ad5504_state *st = iio_priv(indio_dev);
 
 	switch (mask) {
-	case IIO_CHAN_INFO_RAW:
+	case IIO_CHAN_INFO_RAW: {
+		guard(mutex)(&st->lock);
+
 		if (val >= (1 << chan->scan_type.realbits) || val < 0)
 			return -EINVAL;
 
 		return ad5504_spi_write(st, chan->address, val);
+	}
 	default:
 		return -EINVAL;
 	}
@@ -154,6 +164,8 @@ static int ad5504_get_powerdown_mode(struct iio_dev *indio_dev,
 {
 	struct ad5504_state *st = iio_priv(indio_dev);
 
+	guard(mutex)(&st->lock);
+
 	return st->pwr_down_mode;
 }
 
@@ -162,6 +174,8 @@ static int ad5504_set_powerdown_mode(struct iio_dev *indio_dev,
 {
 	struct ad5504_state *st = iio_priv(indio_dev);
 
+	guard(mutex)(&st->lock);
+
 	st->pwr_down_mode = mode;
 
 	return 0;
@@ -179,6 +193,8 @@ static ssize_t ad5504_read_dac_powerdown(struct iio_dev *indio_dev,
 {
 	struct ad5504_state *st = iio_priv(indio_dev);
 
+	guard(mutex)(&st->lock);
+
 	return sysfs_emit(buf, "%d\n",
 			  !(st->pwr_down_mask & (1 << chan->channel)));
 }
@@ -191,6 +207,8 @@ static ssize_t ad5504_write_dac_powerdown(struct iio_dev *indio_dev,
 	int ret;
 	struct ad5504_state *st = iio_priv(indio_dev);
 
+	guard(mutex)(&st->lock);
+
 	ret = kstrtobool(buf, &pwr_down);
 	if (ret)
 		return ret;
@@ -290,6 +308,10 @@ static int ad5504_probe(struct spi_device *spi)
 
 	st = iio_priv(indio_dev);
 
+	ret = devm_mutex_init(dev, &st->lock);
+	if (ret)
+		return ret;
+
 	if (is_acpi_device_node(dev_fwnode(dev))) {
 		st->vref_mv = AD5504_VREF_ACPI_DEFAULT_mV;
 	} else {
-- 
2.55.0

[PATCH v5 6/6] iio: dac: ad5504: support scale via output-range-microvolt property

[Taha Ed-Dafili]

The AD5504 output range is set by the R_SEL pin, not the VCC supply.
Add support for 'output-range-microvolt' to set vref_mv directly from
firmware. Use device_property_present() to distinguish absent from
malformed property rather than relying on the ambiguous -EINVAL from
device_property_read_u32_array(). Fall back to the vcc regulator
voltage for old DTs that predate this property.

Signed-off-by: Taha Ed-Dafili <0rayn.dev@gmail.com>
---
 drivers/iio/dac/ad5504.c | 31 +++++++++++++++++++++++++------
 1 file changed, 25 insertions(+), 6 deletions(-)

diff --git a/drivers/iio/dac/ad5504.c b/drivers/iio/dac/ad5504.c
index 489d2e03e9f6..19ece5a2af58 100644
--- a/drivers/iio/dac/ad5504.c
+++ b/drivers/iio/dac/ad5504.c
@@ -300,6 +300,7 @@ static int ad5504_probe(struct spi_device *spi)
 	struct device *dev = &spi->dev;
 	struct iio_dev *indio_dev;
 	struct ad5504_state *st;
+	u32 range[2];
 	int ret;
 
 	indio_dev = devm_iio_device_alloc(dev, sizeof(*st));
@@ -315,12 +316,30 @@ static int ad5504_probe(struct spi_device *spi)
 	if (is_acpi_device_node(dev_fwnode(dev))) {
 		st->vref_mv = AD5504_VREF_ACPI_DEFAULT_mV;
 	} else {
-		ret = devm_regulator_get_enable_read_voltage(dev, "vcc");
-		if (ret < 0)
-			return dev_err_probe(dev, ret,
-					     "Failed to get vcc regulator\n");
-
-		st->vref_mv = ret / 1000;
+		if (device_property_present(dev, "output-range-microvolt")) {
+			ret = device_property_read_u32_array(dev, "output-range-microvolt",
+							     range, ARRAY_SIZE(range));
+			if (ret)
+				return dev_err_probe(dev, ret,
+							"Error parsing output-range-microvolt\n");
+
+			if (range[0] != 0 || (range[1] != 30 * MICRO && range[1] != 60 * MICRO))
+				return dev_err_probe(dev, -EINVAL,
+					"Invalid output-range-microvolt\n");
+
+			st->vref_mv = range[1] / (MICRO / MILLI);
+
+			ret = devm_regulator_get_enable(dev, "vcc");
+			if (ret < 0)
+				return dev_err_probe(dev, ret, "Failed to enable vcc regulator\n");
+		} else {
+			/* Backward compat: old DTs without output-range-microvolt */
+			ret = devm_regulator_get_enable_read_voltage(dev, "vcc");
+			if (ret < 0)
+				return dev_err_probe(dev, ret, "Failed to get vcc regulator\n");
+
+			st->vref_mv = ret / (MICRO / MILLI);
+		}
 	}
 
 	st->spi = spi;
-- 
2.55.0

Re: [PATCH v5 3/6] iio: dac: ad5504: separate ACPI and DT paths

[Joshua Crofts]

On Fri, 21 Aug 2026 06:24:45 -0400
Taha Ed-Dafili <0rayn.dev@gmail.com> wrote:
> @@ -285,16 +292,20 @@ static int ad5504_probe(struct spi_device *spi)
>  
>  	st = iio_priv(indio_dev);
>  
> -	ret = devm_regulator_get_enable_read_voltage(dev, "vcc");
> -	if (ret < 0 && ret != -ENODEV)
> -		return ret;
> -	if (ret == -ENODEV) {
> -		if (pdata->vref_mv)
> -			st->vref_mv = pdata->vref_mv;
> -		else
> -			dev_warn(dev, "reference voltage unspecified\n");
> +	if (is_acpi_device_node(dev_fwnode(dev))) {
> +		st->vref_mv = AD5504_VREF_ACPI_DEFAULT_mV;
>  	} else {
> -		st->vref_mv = ret / 1000;
> +		ret = devm_regulator_get_enable_read_voltage(dev, "vcc");
> +		if (ret < 0 && ret != -ENODEV)
> +			return ret;
> +		if (ret == -ENODEV) {
> +			if (pdata->vref_mv)
> +				st->vref_mv = pdata->vref_mv;
> +			else
> +				dev_warn(dev, "reference voltage unspecified\n");
> +		} else {
> +			st->vref_mv = ret / 1000;

ret / (MICRO / MILLI)

-- 
Kind regards,
Joshua Crofts

Re: [PATCH v5 3/6] iio: dac: ad5504: strictly separate ACPI and DT probe paths

[Taha Ed-Dafili]

> ret / (MICRO / MILLI)

This exact line was discussed with Andy on v4. Patch 6 in this series
replaces this whole branch with the output-range-microvolt property
parsing, which does use (MICRO / MILLI) correctly. We agreed it wasn't
worth changing here to avoid an unnecessary intermediate diff. Let me
know if it would be better to fix it at this patch regardless.

Best Regards,
Taha Ed-Dafili

Re: [PATCH v5 3/6] iio: dac: ad5504: strictly separate ACPI and DT probe paths

[Joshua Crofts]

On Fri, 21 Aug 2026 07:41:53 -0400
Taha Ed-Dafili <0rayn.dev@gmail.com> wrote:

> > ret / (MICRO / MILLI)  
> 
> This exact line was discussed with Andy on v4. Patch 6 in this series
> replaces this whole branch with the output-range-microvolt property
> parsing, which does use (MICRO / MILLI) correctly. We agreed it wasn't
> worth changing here to avoid an unnecessary intermediate diff. Let me
> know if it would be better to fix it at this patch regardless.
> 

Ah, hadn't gotten to the v4 discussion, in that case it's fine!

-- 
Kind regards,
Joshua Crofts

Re: [PATCH v5 5/6] iio: dac: ad5504: introduce local lock to protect state and spi transfers

[Andy Shevchenko]

On Fri, Aug 21, 2026 at 06:24:47AM -0400, Taha Ed-Dafili wrote:
> The driver lacks locking, exposing concurrent access to the shared DMA
> SPI buffers, the non-atomic CTRL+NOOP write sequence in powerdown, and
> the pwr_down_mask/pwr_down_mode state variables.
> 
> Introduce a mutex via devm_mutex_init() and guard(mutex) at the IIO
> callbacks to serialize access. In read_raw() and write_raw(), scope the
> lock to IIO_CHAN_INFO_RAW only since IIO_CHAN_INFO_SCALE reads vref_mv
> which is immutable after probe.

...

> static ssize_t ad5504_write_dac_powerdown(struct iio_dev *indio_dev,

>  	int ret;
>  	struct ad5504_state *st = iio_priv(indio_dev);
>  
> +	guard(mutex)(&st->lock);
> +
>  	ret = kstrtobool(buf, &pwr_down);
>  	if (ret)
>  		return ret;

This part is not needed to be under the mutex. So, first convert the input,
then acquire the lock.

-- 
With Best Regards,
Andy Shevchenko