From: "Nuno Sá" <noname.nuno@gmail.com>
To: "Jonathan Cameron" <jic23@kernel.org>,
linux-iio@vger.kernel.org, "Nuno Sá" <nuno.sa@analog.com>,
"Andy Shevchenko" <andriy.shevchenko@linux.intel.com>
Cc: Cosmin Tanislav <cosmin.tanislav@analog.com>,
Mihail Chindris <mihail.chindris@analog.com>,
Rasmus Villemoes <linux@rasmusvillemoes.dk>,
Tomislav Denis <tomislav.denis@avl.com>,
Marek Vasut <marex@denx.de>,
Olivier Moysan <olivier.moysan@foss.st.com>,
Fabrice Gasnier <fabrice.gasnier@foss.st.com>,
Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>,
Dmitry Baryshkov <dmitry.baryshkov@linaro.org>,
Marijn Suijten <marijn.suijten@somainline.org>,
Marius Cristea <marius.cristea@microchip.com>,
Ibrahim Tilki <Ibrahim.Tilki@analog.com>,
Jonathan Cameron <Jonathan.Cameron@huawei.com>
Subject: Re: [PATCH v6 7/8] iio: dac: ad3552r: Use device_for_each_child_node_scoped()
Date: Thu, 04 Apr 2024 11:14:17 +0200 [thread overview]
Message-ID: <2f506f64a1b3dc0b7eccead4bac04869d55c52d2.camel@gmail.com> (raw)
In-Reply-To: <20240330185305.1319844-8-jic23@kernel.org>
On Sat, 2024-03-30 at 18:53 +0000, Jonathan Cameron wrote:
> From: Jonathan Cameron <Jonathan.Cameron@huawei.com>
>
> Switching to the _scoped() version removes the need for manual
> calling of fwnode_handle_put() in the paths where the code
> exits the loop early. In this case that's all in error paths.
>
> Removing the goto err; statements also allows more extensive use of
> dev_err_probe() further simplifying the code.
>
> Cc: Mihail Chindris <mihail.chindris@analog.com>
> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
> ---
Hmm, Mihail is no longer in ADI... I'll see what other drivers he's
"maintaining" and default them to me.
Anyways,
Reviewed-by: Nuno Sa <nuno.sa@analog.com>
> drivers/iio/dac/ad3552r.c | 51 +++++++++++++++------------------------
> 1 file changed, 19 insertions(+), 32 deletions(-)
>
> diff --git a/drivers/iio/dac/ad3552r.c b/drivers/iio/dac/ad3552r.c
> index a492e8f2fc0f..e14a065b29ca 100644
> --- a/drivers/iio/dac/ad3552r.c
> +++ b/drivers/iio/dac/ad3552r.c
> @@ -880,7 +880,6 @@ static void ad3552r_reg_disable(void *reg)
> static int ad3552r_configure_device(struct ad3552r_desc *dac)
> {
> struct device *dev = &dac->spi->dev;
> - struct fwnode_handle *child;
> struct regulator *vref;
> int err, cnt = 0, voltage, delta = 100000;
> u32 vals[2], val, ch;
> @@ -949,53 +948,45 @@ static int ad3552r_configure_device(struct ad3552r_desc
> *dac)
> return -ENODEV;
> }
>
> - device_for_each_child_node(dev, child) {
> + device_for_each_child_node_scoped(dev, child) {
> err = fwnode_property_read_u32(child, "reg", &ch);
> - if (err) {
> - dev_err(dev, "mandatory reg property missing\n");
> - goto put_child;
> - }
> - if (ch >= AD3552R_NUM_CH) {
> - dev_err(dev, "reg must be less than %d\n",
> - AD3552R_NUM_CH);
> - err = -EINVAL;
> - goto put_child;
> - }
> + if (err)
> + return dev_err_probe(dev, err,
> + "mandatory reg property
> missing\n");
> + if (ch >= AD3552R_NUM_CH)
> + return dev_err_probe(dev, -EINVAL,
> + "reg must be less than %d\n",
> + AD3552R_NUM_CH);
>
> if (fwnode_property_present(child, "adi,output-range-
> microvolt")) {
> err = fwnode_property_read_u32_array(child,
> "adi,output-
> range-microvolt",
> vals,
> 2);
> - if (err) {
> - dev_err(dev,
> + if (err)
> + return dev_err_probe(dev, err,
> "adi,output-range-microvolt property
> could not be parsed\n");
> - goto put_child;
> - }
>
> err = ad3552r_find_range(dac->chip_id, vals);
> - if (err < 0) {
> - dev_err(dev,
> - "Invalid adi,output-range-microvolt
> value\n");
> - goto put_child;
> - }
> + if (err < 0)
> + return dev_err_probe(dev, err,
> + "Invalid adi,output-
> range-microvolt value\n");
> +
> val = err;
> err = ad3552r_set_ch_value(dac,
>
> AD3552R_CH_OUTPUT_RANGE_SEL,
> ch, val);
> if (err)
> - goto put_child;
> + return err;
>
> dac->ch_data[ch].range = val;
> } else if (dac->chip_id == AD3542R_ID) {
> - dev_err(dev,
> - "adi,output-range-microvolt is required for
> ad3542r\n");
> - err = -EINVAL;
> - goto put_child;
> + return dev_err_probe(dev, -EINVAL,
> + "adi,output-range-microvolt is
> required for ad3542r\n");
> } else {
> err = ad3552r_configure_custom_gain(dac, child, ch);
> if (err)
> - goto put_child;
> + return err;
> }
>
> ad3552r_calc_gain_and_offset(dac, ch);
> @@ -1003,7 +994,7 @@ static int ad3552r_configure_device(struct ad3552r_desc
> *dac)
>
> err = ad3552r_set_ch_value(dac, AD3552R_CH_SELECT, ch, 1);
> if (err < 0)
> - goto put_child;
> + return err;
>
> dac->channels[cnt] = AD3552R_CH_DAC(ch);
> ++cnt;
> @@ -1021,10 +1012,6 @@ static int ad3552r_configure_device(struct ad3552r_desc
> *dac)
> dac->num_ch = cnt;
>
> return 0;
> -put_child:
> - fwnode_handle_put(child);
> -
> - return err;
> }
>
> static int ad3552r_init(struct ad3552r_desc *dac)
next prev parent reply other threads:[~2024-04-04 9:10 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-03-30 18:52 [PATCH v6 0/8] IIO: Use device_for_each_child_scope() Jonathan Cameron
2024-03-30 18:52 ` [PATCH v6 1/8] iio: adc: mcp3564: Use device_for_each_child_node_scoped() Jonathan Cameron
2024-03-30 18:52 ` [PATCH v6 2/8] iio: adc: qcom-spmi-adc5: " Jonathan Cameron
2024-04-13 9:36 ` Jonathan Cameron
2024-03-30 18:53 ` [PATCH v6 3/8] iio: adc: stm32: Fixing err code to not indicate success Jonathan Cameron
2024-04-12 12:31 ` Fabrice Gasnier
2024-04-13 9:37 ` Jonathan Cameron
2024-03-30 18:53 ` [PATCH v6 4/8] iio: adc: stm32: Use device_for_each_child_node_scoped() Jonathan Cameron
2024-04-13 9:38 ` Jonathan Cameron
2024-03-30 18:53 ` [PATCH v6 5/8] iio: adc: ti-ads1015: " Jonathan Cameron
2024-03-30 18:53 ` [PATCH v6 6/8] iio: adc: ti-ads131e08: " Jonathan Cameron
2024-03-30 18:53 ` [PATCH v6 7/8] iio: dac: ad3552r: " Jonathan Cameron
2024-04-04 9:14 ` Nuno Sá [this message]
2024-04-06 10:18 ` Jonathan Cameron
2024-03-30 18:53 ` [PATCH v6 8/8] iio: dac: ad5770r: " Jonathan Cameron
2024-04-04 9:11 ` Nuno Sá
2024-04-06 10:19 ` Jonathan Cameron
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=2f506f64a1b3dc0b7eccead4bac04869d55c52d2.camel@gmail.com \
--to=noname.nuno@gmail.com \
--cc=Ibrahim.Tilki@analog.com \
--cc=Jonathan.Cameron@huawei.com \
--cc=andriy.shevchenko@linux.intel.com \
--cc=cosmin.tanislav@analog.com \
--cc=dmitry.baryshkov@linaro.org \
--cc=fabrice.gasnier@foss.st.com \
--cc=jic23@kernel.org \
--cc=linux-iio@vger.kernel.org \
--cc=linux@rasmusvillemoes.dk \
--cc=marex@denx.de \
--cc=marijn.suijten@somainline.org \
--cc=marius.cristea@microchip.com \
--cc=mihail.chindris@analog.com \
--cc=nuno.sa@analog.com \
--cc=olivier.moysan@foss.st.com \
--cc=prabhakar.mahadev-lad.rj@bp.renesas.com \
--cc=tomislav.denis@avl.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox