* [PATCH iio] imu: inv_mpu6050: adds device tree bindings
@ 2015-04-24 9:23 Varka Bhadram
2015-04-28 3:31 ` Varka Bhadram
2015-05-08 15:08 ` Jonathan Cameron
0 siblings, 2 replies; 4+ messages in thread
From: Varka Bhadram @ 2015-04-24 9:23 UTC (permalink / raw)
To: devicetree, linux-iio; +Cc: jic23, Varka Bhadram
Signed-off-by: Varka Bhadram <varkab@cdac.in>
---
.../devicetree/bindings/iio/imu/inv_mpu6050.txt | 17 +++++++++++++++++
1 file changed, 17 insertions(+)
create mode 100644 Documentation/devicetree/bindings/iio/imu/inv_mpu6050.txt
diff --git a/Documentation/devicetree/bindings/iio/imu/inv_mpu6050.txt b/Documentation/devicetree/bindings/iio/imu/inv_mpu6050.txt
new file mode 100644
index 0000000..e4d8f1c
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/imu/inv_mpu6050.txt
@@ -0,0 +1,17 @@
+InvenSense MPU-6050 Six-Axis (Gyro + Accelerometer) MEMS MotionTracking Device
+
+http://www.invensense.com/mems/gyro/mpu6050.html
+
+Required properties:
+ - compatible : should be "invensense,mpu6050"
+ - reg : the I2C address of the sensor
+ - interrupt-parent : should be the phandle for the interrupt controller
+ - interrupts : interrupt mapping for GPIO IRQ
+
+Example:
+ mpu6050@68 {
+ compatible = "invensense,mpu6050";
+ reg = <0x68>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <18 1>;
+ };
--
1.7.9.5
^ permalink raw reply related [flat|nested] 4+ messages in thread* Re: [PATCH iio] imu: inv_mpu6050: adds device tree bindings
2015-04-24 9:23 [PATCH iio] imu: inv_mpu6050: adds device tree bindings Varka Bhadram
@ 2015-04-28 3:31 ` Varka Bhadram
2015-04-28 5:52 ` Jonathan Cameron
2015-05-08 15:08 ` Jonathan Cameron
1 sibling, 1 reply; 4+ messages in thread
From: Varka Bhadram @ 2015-04-28 3:31 UTC (permalink / raw)
To: devicetree, linux-iio; +Cc: jic23, Varka Bhadram
On 04/24/2015 02:53 PM, Varka Bhadram wrote:
> Signed-off-by: Varka Bhadram <varkab@cdac.in>
> ---
> .../devicetree/bindings/iio/imu/inv_mpu6050.txt | 17 +++++++++++++++++
> 1 file changed, 17 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/iio/imu/inv_mpu6050.txt
>
> diff --git a/Documentation/devicetree/bindings/iio/imu/inv_mpu6050.txt b/Documentation/devicetree/bindings/iio/imu/inv_mpu6050.txt
> new file mode 100644
> index 0000000..e4d8f1c
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/iio/imu/inv_mpu6050.txt
> @@ -0,0 +1,17 @@
> +InvenSense MPU-6050 Six-Axis (Gyro + Accelerometer) MEMS MotionTracking Device
> +
> +http://www.invensense.com/mems/gyro/mpu6050.html
> +
> +Required properties:
> + - compatible : should be "invensense,mpu6050"
> + - reg : the I2C address of the sensor
> + - interrupt-parent : should be the phandle for the interrupt controller
> + - interrupts : interrupt mapping for GPIO IRQ
> +
> +Example:
> + mpu6050@68 {
> + compatible = "invensense,mpu6050";
> + reg = <0x68>;
> + interrupt-parent = <&gpio1>;
> + interrupts = <18 1>;
> + };
Ping..?
--
Varka Bhadram
^ permalink raw reply [flat|nested] 4+ messages in thread* Re: [PATCH iio] imu: inv_mpu6050: adds device tree bindings
2015-04-28 3:31 ` Varka Bhadram
@ 2015-04-28 5:52 ` Jonathan Cameron
0 siblings, 0 replies; 4+ messages in thread
From: Jonathan Cameron @ 2015-04-28 5:52 UTC (permalink / raw)
To: Varka Bhadram, devicetree, linux-iio; +Cc: jic23, Varka Bhadram
On 28 April 2015 04:31:06 BST, Varka Bhadram <varkabhadram@gmail.com> wrote:
>On 04/24/2015 02:53 PM, Varka Bhadram wrote:
>
>> Signed-off-by: Varka Bhadram <varkab@cdac.in>
>> ---
>> .../devicetree/bindings/iio/imu/inv_mpu6050.txt | 17
>+++++++++++++++++
>> 1 file changed, 17 insertions(+)
>> create mode 100644
>Documentation/devicetree/bindings/iio/imu/inv_mpu6050.txt
>>
>> diff --git
>a/Documentation/devicetree/bindings/iio/imu/inv_mpu6050.txt
>b/Documentation/devicetree/bindings/iio/imu/inv_mpu6050.txt
>> new file mode 100644
>> index 0000000..e4d8f1c
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/iio/imu/inv_mpu6050.txt
>> @@ -0,0 +1,17 @@
>> +InvenSense MPU-6050 Six-Axis (Gyro + Accelerometer) MEMS
>MotionTracking Device
>> +
>> +http://www.invensense.com/mems/gyro/mpu6050.html
>> +
>> +Required properties:
>> + - compatible : should be "invensense,mpu6050"
>> + - reg : the I2C address of the sensor
>> + - interrupt-parent : should be the phandle for the interrupt
>controller
>> + - interrupts : interrupt mapping for GPIO IRQ
>> +
>> +Example:
>> + mpu6050@68 {
>> + compatible = "invensense,mpu6050";
>> + reg = <0x68>;
>> + interrupt-parent = <&gpio1>;
>> + interrupts = <18 1>;
>> + };
>
>Ping..?
Device tree bindings. Either need a device tree back or 3 weeks to pass before I can
take them. Looks fine to me! Could cross ref the interrupts binding doc....
--
Sent from my Android device with K-9 Mail. Please excuse my brevity.
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [PATCH iio] imu: inv_mpu6050: adds device tree bindings
2015-04-24 9:23 [PATCH iio] imu: inv_mpu6050: adds device tree bindings Varka Bhadram
2015-04-28 3:31 ` Varka Bhadram
@ 2015-05-08 15:08 ` Jonathan Cameron
1 sibling, 0 replies; 4+ messages in thread
From: Jonathan Cameron @ 2015-05-08 15:08 UTC (permalink / raw)
To: Varka Bhadram, devicetree, linux-iio; +Cc: Varka Bhadram
On 24/04/15 05:23, Varka Bhadram wrote:
> Signed-off-by: Varka Bhadram <varkab@cdac.in>
Applied to the togreg branch of iio.git. Will be initially pushed
out as testing for the autobuilders to play with it.
Thanks,
Jonathan
> ---
> .../devicetree/bindings/iio/imu/inv_mpu6050.txt | 17 +++++++++++++++++
> 1 file changed, 17 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/iio/imu/inv_mpu6050.txt
>
> diff --git a/Documentation/devicetree/bindings/iio/imu/inv_mpu6050.txt b/Documentation/devicetree/bindings/iio/imu/inv_mpu6050.txt
> new file mode 100644
> index 0000000..e4d8f1c
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/iio/imu/inv_mpu6050.txt
> @@ -0,0 +1,17 @@
> +InvenSense MPU-6050 Six-Axis (Gyro + Accelerometer) MEMS MotionTracking Device
> +
> +http://www.invensense.com/mems/gyro/mpu6050.html
> +
> +Required properties:
> + - compatible : should be "invensense,mpu6050"
> + - reg : the I2C address of the sensor
> + - interrupt-parent : should be the phandle for the interrupt controller
> + - interrupts : interrupt mapping for GPIO IRQ
> +
> +Example:
> + mpu6050@68 {
> + compatible = "invensense,mpu6050";
> + reg = <0x68>;
> + interrupt-parent = <&gpio1>;
> + interrupts = <18 1>;
> + };
>
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2015-05-08 18:30 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2015-04-24 9:23 [PATCH iio] imu: inv_mpu6050: adds device tree bindings Varka Bhadram
2015-04-28 3:31 ` Varka Bhadram
2015-04-28 5:52 ` Jonathan Cameron
2015-05-08 15:08 ` Jonathan Cameron
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox