* [PATCH 07/27] iio: Allow compile test of GPIO consumers if !GPIOLIB [not found] ` <1430843563-18615-1-git-send-email-geert@linux-m68k.org> @ 2015-05-05 16:32 ` Geert Uytterhoeven 2015-05-07 10:37 ` Jonathan Cameron 2015-05-05 16:32 ` [PATCH 20/27] Staging: " Geert Uytterhoeven 1 sibling, 1 reply; 4+ messages in thread From: Geert Uytterhoeven @ 2015-05-05 16:32 UTC (permalink / raw) To: Linus Walleij, Alexandre Courbot, Arnd Bergmann Cc: linux-gpio, linux-kernel, Geert Uytterhoeven, Jonathan Cameron, linux-iio The GPIO subsystem provides dummy GPIO consumer functions if GPIOLIB is not enabled. Hence drivers that depend on GPIOLIB, but use GPIO consumer functionality only, can still be compiled if GPIOLIB is not enabled. Relax the dependency on GPIOLIB if COMPILE_TEST is enabled, where appropriate. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Jonathan Cameron <jic23@kernel.org> Cc: linux-iio@vger.kernel.org --- drivers/iio/humidity/Kconfig | 2 +- drivers/iio/magnetometer/Kconfig | 4 ++-- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/iio/humidity/Kconfig b/drivers/iio/humidity/Kconfig index 4813b793b9f7f944..688c0d1cb47dea36 100644 --- a/drivers/iio/humidity/Kconfig +++ b/drivers/iio/humidity/Kconfig @@ -5,7 +5,7 @@ menu "Humidity sensors" config DHT11 tristate "DHT11 (and compatible sensors) driver" - depends on GPIOLIB + depends on GPIOLIB || COMPILE_TEST help This driver supports reading data via a single interrupt generating GPIO line. Currently tested are DHT11 and DHT22. diff --git a/drivers/iio/magnetometer/Kconfig b/drivers/iio/magnetometer/Kconfig index a5d6de72c523bab2..00297bbb7e4b4a0b 100644 --- a/drivers/iio/magnetometer/Kconfig +++ b/drivers/iio/magnetometer/Kconfig @@ -8,7 +8,7 @@ menu "Magnetometer sensors" config AK8975 tristate "Asahi Kasei AK 3-Axis Magnetometer" depends on I2C - depends on GPIOLIB + depends on GPIOLIB || COMPILE_TEST help Say yes here to build support for Asahi Kasei AK8975, AK8963, AK09911 or AK09912 3-Axis Magnetometer. @@ -19,7 +19,7 @@ config AK8975 config AK09911 tristate "Asahi Kasei AK09911 3-axis Compass" depends on I2C - depends on GPIOLIB + depends on GPIOLIB || COMPILE_TEST select AK8975 help Deprecated: AK09911 is now supported by AK8975 driver. -- 1.9.1 ^ permalink raw reply related [flat|nested] 4+ messages in thread
* Re: [PATCH 07/27] iio: Allow compile test of GPIO consumers if !GPIOLIB 2015-05-05 16:32 ` [PATCH 07/27] iio: Allow compile test of GPIO consumers if !GPIOLIB Geert Uytterhoeven @ 2015-05-07 10:37 ` Jonathan Cameron 0 siblings, 0 replies; 4+ messages in thread From: Jonathan Cameron @ 2015-05-07 10:37 UTC (permalink / raw) To: Geert Uytterhoeven, Linus Walleij, Alexandre Courbot, Arnd Bergmann Cc: linux-gpio, linux-kernel, linux-iio On 05/05/15 17:32, Geert Uytterhoeven wrote: > The GPIO subsystem provides dummy GPIO consumer functions if GPIOLIB is > not enabled. Hence drivers that depend on GPIOLIB, but use GPIO consumer > functionality only, can still be compiled if GPIOLIB is not enabled. > > Relax the dependency on GPIOLIB if COMPILE_TEST is enabled, where > appropriate. > > Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> > Cc: Jonathan Cameron <jic23@kernel.org> > Cc: linux-iio@vger.kernel.org Not entirely convinced that the extra build coverage from this is going to be that extensive, but it does no harm, so why not? Applied to the togreg branch of iio.git, will sometime be pushed out as testing, for the autobuilders to play with it, as I am travelling. Jonathan > --- > drivers/iio/humidity/Kconfig | 2 +- > drivers/iio/magnetometer/Kconfig | 4 ++-- > 2 files changed, 3 insertions(+), 3 deletions(-) > > diff --git a/drivers/iio/humidity/Kconfig b/drivers/iio/humidity/Kconfig > index 4813b793b9f7f944..688c0d1cb47dea36 100644 > --- a/drivers/iio/humidity/Kconfig > +++ b/drivers/iio/humidity/Kconfig > @@ -5,7 +5,7 @@ menu "Humidity sensors" > > config DHT11 > tristate "DHT11 (and compatible sensors) driver" > - depends on GPIOLIB > + depends on GPIOLIB || COMPILE_TEST > help > This driver supports reading data via a single interrupt > generating GPIO line. Currently tested are DHT11 and DHT22. > diff --git a/drivers/iio/magnetometer/Kconfig b/drivers/iio/magnetometer/Kconfig > index a5d6de72c523bab2..00297bbb7e4b4a0b 100644 > --- a/drivers/iio/magnetometer/Kconfig > +++ b/drivers/iio/magnetometer/Kconfig > @@ -8,7 +8,7 @@ menu "Magnetometer sensors" > config AK8975 > tristate "Asahi Kasei AK 3-Axis Magnetometer" > depends on I2C > - depends on GPIOLIB > + depends on GPIOLIB || COMPILE_TEST > help > Say yes here to build support for Asahi Kasei AK8975, AK8963, > AK09911 or AK09912 3-Axis Magnetometer. > @@ -19,7 +19,7 @@ config AK8975 > config AK09911 > tristate "Asahi Kasei AK09911 3-axis Compass" > depends on I2C > - depends on GPIOLIB > + depends on GPIOLIB || COMPILE_TEST > select AK8975 > help > Deprecated: AK09911 is now supported by AK8975 driver. > ^ permalink raw reply [flat|nested] 4+ messages in thread
* [PATCH 20/27] Staging: iio: Allow compile test of GPIO consumers if !GPIOLIB [not found] ` <1430843563-18615-1-git-send-email-geert@linux-m68k.org> 2015-05-05 16:32 ` [PATCH 07/27] iio: Allow compile test of GPIO consumers if !GPIOLIB Geert Uytterhoeven @ 2015-05-05 16:32 ` Geert Uytterhoeven 2015-05-07 10:38 ` Jonathan Cameron 1 sibling, 1 reply; 4+ messages in thread From: Geert Uytterhoeven @ 2015-05-05 16:32 UTC (permalink / raw) To: Linus Walleij, Alexandre Courbot, Arnd Bergmann Cc: linux-gpio, linux-kernel, Geert Uytterhoeven, Jonathan Cameron, linux-iio, devel The GPIO subsystem provides dummy GPIO consumer functions if GPIOLIB is not enabled. Hence drivers that depend on GPIOLIB, but use GPIO consumer functionality only, can still be compiled if GPIOLIB is not enabled. Relax the dependency on GPIOLIB if COMPILE_TEST is enabled, where appropriate. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Jonathan Cameron <jic23@kernel.org> Cc: linux-iio@vger.kernel.org Cc: devel@driverdev.osuosl.org --- drivers/staging/iio/accel/Kconfig | 2 +- drivers/staging/iio/adc/Kconfig | 6 +++--- drivers/staging/iio/addac/Kconfig | 2 +- drivers/staging/iio/resolver/Kconfig | 4 ++-- 4 files changed, 7 insertions(+), 7 deletions(-) diff --git a/drivers/staging/iio/accel/Kconfig b/drivers/staging/iio/accel/Kconfig index 07b7ffa00ab53c86..fa67da9408b6b3b7 100644 --- a/drivers/staging/iio/accel/Kconfig +++ b/drivers/staging/iio/accel/Kconfig @@ -79,7 +79,7 @@ config LIS3L02DQ depends on SPI select IIO_TRIGGER if IIO_BUFFER depends on !IIO_BUFFER || IIO_KFIFO_BUF - depends on GPIOLIB + depends on GPIOLIB || COMPILE_TEST help Say Y here to build SPI support for the ST microelectronics accelerometer. The driver supplies direct access via sysfs files diff --git a/drivers/staging/iio/adc/Kconfig b/drivers/staging/iio/adc/Kconfig index d0016ce6e65840e6..94ae4232ee773497 100644 --- a/drivers/staging/iio/adc/Kconfig +++ b/drivers/staging/iio/adc/Kconfig @@ -5,7 +5,7 @@ menu "Analog to digital converters" config AD7606 tristate "Analog Devices AD7606 ADC driver" - depends on GPIOLIB + depends on GPIOLIB || COMPILE_TEST select IIO_BUFFER select IIO_TRIGGERED_BUFFER help @@ -39,7 +39,7 @@ config AD7606_IFACE_SPI config AD7780 tristate "Analog Devices AD7780 and similar ADCs driver" depends on SPI - depends on GPIOLIB + depends on GPIOLIB || COMPILE_TEST select AD_SIGMA_DELTA help Say yes here to build support for Analog Devices AD7170, AD7171, @@ -52,7 +52,7 @@ config AD7780 config AD7816 tristate "Analog Devices AD7816/7/8 temperature sensor and ADC driver" depends on SPI - depends on GPIOLIB + depends on GPIOLIB || COMPILE_TEST help Say yes here to build support for Analog Devices AD7816/7/8 temperature sensors and ADC. diff --git a/drivers/staging/iio/addac/Kconfig b/drivers/staging/iio/addac/Kconfig index 0ed7e13e2283edb0..ba18b8432d9cce6e 100644 --- a/drivers/staging/iio/addac/Kconfig +++ b/drivers/staging/iio/addac/Kconfig @@ -5,7 +5,7 @@ menu "Analog digital bi-direction converters" config ADT7316 tristate "Analog Devices ADT7316/7/8 ADT7516/7/9 temperature sensor, ADC and DAC driver" - depends on GPIOLIB + depends on GPIOLIB || COMPILE_TEST help Say yes here to build support for Analog Devices ADT7316, ADT7317, ADT7318 and ADT7516, ADT7517, ADT7519 temperature sensors, ADC and DAC. diff --git a/drivers/staging/iio/resolver/Kconfig b/drivers/staging/iio/resolver/Kconfig index c7a742ec122727b0..1c7e2860d6b75d56 100644 --- a/drivers/staging/iio/resolver/Kconfig +++ b/drivers/staging/iio/resolver/Kconfig @@ -16,7 +16,7 @@ config AD2S90 config AD2S1200 tristate "Analog Devices ad2s1200/ad2s1205 driver" depends on SPI - depends on GPIOLIB + depends on GPIOLIB || COMPILE_TEST help Say yes here to build support for Analog Devices spi resolver to digital converters, ad2s1200 and ad2s1205, provides direct access @@ -28,7 +28,7 @@ config AD2S1200 config AD2S1210 tristate "Analog Devices ad2s1210 driver" depends on SPI - depends on GPIOLIB + depends on GPIOLIB || COMPILE_TEST help Say yes here to build support for Analog Devices spi resolver to digital converters, ad2s1210, provides direct access via sysfs. -- 1.9.1 ^ permalink raw reply related [flat|nested] 4+ messages in thread
* Re: [PATCH 20/27] Staging: iio: Allow compile test of GPIO consumers if !GPIOLIB 2015-05-05 16:32 ` [PATCH 20/27] Staging: " Geert Uytterhoeven @ 2015-05-07 10:38 ` Jonathan Cameron 0 siblings, 0 replies; 4+ messages in thread From: Jonathan Cameron @ 2015-05-07 10:38 UTC (permalink / raw) To: Geert Uytterhoeven, Linus Walleij, Alexandre Courbot, Arnd Bergmann Cc: linux-gpio, linux-kernel, linux-iio, devel On 05/05/15 17:32, Geert Uytterhoeven wrote: > The GPIO subsystem provides dummy GPIO consumer functions if GPIOLIB is > not enabled. Hence drivers that depend on GPIOLIB, but use GPIO consumer > functionality only, can still be compiled if GPIOLIB is not enabled. > > Relax the dependency on GPIOLIB if COMPILE_TEST is enabled, where > appropriate. > > Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> > Cc: Jonathan Cameron <jic23@kernel.org> > Cc: linux-iio@vger.kernel.org > Cc: devel@driverdev.osuosl.org Applied to the togreg branch of iio.git - to be pushed out as testing 'soonish'. > --- > drivers/staging/iio/accel/Kconfig | 2 +- > drivers/staging/iio/adc/Kconfig | 6 +++--- > drivers/staging/iio/addac/Kconfig | 2 +- > drivers/staging/iio/resolver/Kconfig | 4 ++-- > 4 files changed, 7 insertions(+), 7 deletions(-) > > diff --git a/drivers/staging/iio/accel/Kconfig b/drivers/staging/iio/accel/Kconfig > index 07b7ffa00ab53c86..fa67da9408b6b3b7 100644 > --- a/drivers/staging/iio/accel/Kconfig > +++ b/drivers/staging/iio/accel/Kconfig > @@ -79,7 +79,7 @@ config LIS3L02DQ > depends on SPI > select IIO_TRIGGER if IIO_BUFFER > depends on !IIO_BUFFER || IIO_KFIFO_BUF > - depends on GPIOLIB > + depends on GPIOLIB || COMPILE_TEST > help > Say Y here to build SPI support for the ST microelectronics > accelerometer. The driver supplies direct access via sysfs files > diff --git a/drivers/staging/iio/adc/Kconfig b/drivers/staging/iio/adc/Kconfig > index d0016ce6e65840e6..94ae4232ee773497 100644 > --- a/drivers/staging/iio/adc/Kconfig > +++ b/drivers/staging/iio/adc/Kconfig > @@ -5,7 +5,7 @@ menu "Analog to digital converters" > > config AD7606 > tristate "Analog Devices AD7606 ADC driver" > - depends on GPIOLIB > + depends on GPIOLIB || COMPILE_TEST > select IIO_BUFFER > select IIO_TRIGGERED_BUFFER > help > @@ -39,7 +39,7 @@ config AD7606_IFACE_SPI > config AD7780 > tristate "Analog Devices AD7780 and similar ADCs driver" > depends on SPI > - depends on GPIOLIB > + depends on GPIOLIB || COMPILE_TEST > select AD_SIGMA_DELTA > help > Say yes here to build support for Analog Devices AD7170, AD7171, > @@ -52,7 +52,7 @@ config AD7780 > config AD7816 > tristate "Analog Devices AD7816/7/8 temperature sensor and ADC driver" > depends on SPI > - depends on GPIOLIB > + depends on GPIOLIB || COMPILE_TEST > help > Say yes here to build support for Analog Devices AD7816/7/8 > temperature sensors and ADC. > diff --git a/drivers/staging/iio/addac/Kconfig b/drivers/staging/iio/addac/Kconfig > index 0ed7e13e2283edb0..ba18b8432d9cce6e 100644 > --- a/drivers/staging/iio/addac/Kconfig > +++ b/drivers/staging/iio/addac/Kconfig > @@ -5,7 +5,7 @@ menu "Analog digital bi-direction converters" > > config ADT7316 > tristate "Analog Devices ADT7316/7/8 ADT7516/7/9 temperature sensor, ADC and DAC driver" > - depends on GPIOLIB > + depends on GPIOLIB || COMPILE_TEST > help > Say yes here to build support for Analog Devices ADT7316, ADT7317, ADT7318 > and ADT7516, ADT7517, ADT7519 temperature sensors, ADC and DAC. > diff --git a/drivers/staging/iio/resolver/Kconfig b/drivers/staging/iio/resolver/Kconfig > index c7a742ec122727b0..1c7e2860d6b75d56 100644 > --- a/drivers/staging/iio/resolver/Kconfig > +++ b/drivers/staging/iio/resolver/Kconfig > @@ -16,7 +16,7 @@ config AD2S90 > config AD2S1200 > tristate "Analog Devices ad2s1200/ad2s1205 driver" > depends on SPI > - depends on GPIOLIB > + depends on GPIOLIB || COMPILE_TEST > help > Say yes here to build support for Analog Devices spi resolver > to digital converters, ad2s1200 and ad2s1205, provides direct access > @@ -28,7 +28,7 @@ config AD2S1200 > config AD2S1210 > tristate "Analog Devices ad2s1210 driver" > depends on SPI > - depends on GPIOLIB > + depends on GPIOLIB || COMPILE_TEST > help > Say yes here to build support for Analog Devices spi resolver > to digital converters, ad2s1210, provides direct access via sysfs. > ^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2015-05-07 23:33 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
[not found] <1430836404-15513-1-git-send-email-geert@linux-m68k.org>
[not found] ` <1430843563-18615-1-git-send-email-geert@linux-m68k.org>
2015-05-05 16:32 ` [PATCH 07/27] iio: Allow compile test of GPIO consumers if !GPIOLIB Geert Uytterhoeven
2015-05-07 10:37 ` Jonathan Cameron
2015-05-05 16:32 ` [PATCH 20/27] Staging: " Geert Uytterhoeven
2015-05-07 10:38 ` Jonathan Cameron
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox