public inbox for linux-iio@vger.kernel.org
 help / color / mirror / Atom feed
From: Hans de Goede <hdegoede@redhat.com>
To: Andy Shevchenko <andriy.shevchenko@linux.intel.com>,
	Jonathan Cameron <Jonathan.Cameron@huawei.com>,
	linux-iio@vger.kernel.org, linux-kernel@vger.kernel.org
Cc: "Jonathan Cameron" <jic23@kernel.org>,
	"Lars-Peter Clausen" <lars@metafoo.de>,
	"Ilpo Järvinen" <ilpo.jarvinen@linux.intel.com>
Subject: Re: [PATCH v1 1/1] iio: light: ltr501: Drop most likely fake ACPI ID
Date: Thu, 12 Sep 2024 15:51:09 +0200	[thread overview]
Message-ID: <c45dd21c-493a-4e56-809e-85d6d7201254@redhat.com> (raw)
In-Reply-To: <20240911212202.2892451-1-andriy.shevchenko@linux.intel.com>

Hi,

On 9/11/24 11:22 PM, Andy Shevchenko wrote:
> The commit in question does not proove that ACPI ID exists.
> Quite likely it was a cargo cult addition while doint that
> for DT-based enumeration.  Drop most likely fake ACPI ID.
> 
> Googling for LTERxxxx gives no useful results in regard to DSDT.
> Moreover, there is no "LTER" official vendor ID in the registry.
> 
> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

Thanks, patch looks good to me:

Reviewed-by: Hans de Goede <hdegoede@redhat.com>

Regards,

Hans



> ---
>  drivers/iio/light/ltr501.c | 23 -----------------------
>  1 file changed, 23 deletions(-)
> 
> diff --git a/drivers/iio/light/ltr501.c b/drivers/iio/light/ltr501.c
> index 8c516ede9116..0e0420573286 100644
> --- a/drivers/iio/light/ltr501.c
> +++ b/drivers/iio/light/ltr501.c
> @@ -15,7 +15,6 @@
>  #include <linux/err.h>
>  #include <linux/delay.h>
>  #include <linux/regmap.h>
> -#include <linux/acpi.h>
>  #include <linux/regulator/consumer.h>
>  
>  #include <linux/iio/iio.h>
> @@ -1422,17 +1421,6 @@ static int ltr501_powerdown(struct ltr501_data *data)
>  				  data->ps_contr & ~LTR501_CONTR_ACTIVE);
>  }
>  
> -static const char *ltr501_match_acpi_device(struct device *dev, int *chip_idx)
> -{
> -	const struct acpi_device_id *id;
> -
> -	id = acpi_match_device(dev->driver->acpi_match_table, dev);
> -	if (!id)
> -		return NULL;
> -	*chip_idx = id->driver_data;
> -	return dev_name(dev);
> -}
> -
>  static int ltr501_probe(struct i2c_client *client)
>  {
>  	const struct i2c_device_id *id = i2c_client_get_device_id(client);
> @@ -1523,8 +1511,6 @@ static int ltr501_probe(struct i2c_client *client)
>  	if (id) {
>  		name = id->name;
>  		chip_idx = id->driver_data;
> -	} else  if (ACPI_HANDLE(&client->dev)) {
> -		name = ltr501_match_acpi_device(&client->dev, &chip_idx);
>  	} else {
>  		return -ENODEV;
>  	}
> @@ -1609,14 +1595,6 @@ static int ltr501_resume(struct device *dev)
>  
>  static DEFINE_SIMPLE_DEV_PM_OPS(ltr501_pm_ops, ltr501_suspend, ltr501_resume);
>  
> -static const struct acpi_device_id ltr_acpi_match[] = {
> -	{ "LTER0501", ltr501 },
> -	{ "LTER0559", ltr559 },
> -	{ "LTER0301", ltr301 },
> -	{ },
> -};
> -MODULE_DEVICE_TABLE(acpi, ltr_acpi_match);
> -
>  static const struct i2c_device_id ltr501_id[] = {
>  	{ "ltr501", ltr501 },
>  	{ "ltr559", ltr559 },
> @@ -1640,7 +1618,6 @@ static struct i2c_driver ltr501_driver = {
>  		.name   = LTR501_DRV_NAME,
>  		.of_match_table = ltr501_of_match,
>  		.pm	= pm_sleep_ptr(&ltr501_pm_ops),
> -		.acpi_match_table = ltr_acpi_match,
>  	},
>  	.probe = ltr501_probe,
>  	.remove	= ltr501_remove,


  reply	other threads:[~2024-09-12 13:51 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-09-11 21:22 [PATCH v1 1/1] iio: light: ltr501: Drop most likely fake ACPI ID Andy Shevchenko
2024-09-12 13:51 ` Hans de Goede [this message]
2024-09-13  9:31   ` Andy Shevchenko
2024-09-14 14:25     ` Jonathan Cameron
2024-09-14 14:30       ` Hans de Goede
2024-09-14 15:06         ` Jonathan Cameron
2024-09-14 13:45   ` Hans de Goede
2024-09-16 10:00     ` Andy Shevchenko

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=c45dd21c-493a-4e56-809e-85d6d7201254@redhat.com \
    --to=hdegoede@redhat.com \
    --cc=Jonathan.Cameron@huawei.com \
    --cc=andriy.shevchenko@linux.intel.com \
    --cc=ilpo.jarvinen@linux.intel.com \
    --cc=jic23@kernel.org \
    --cc=lars@metafoo.de \
    --cc=linux-iio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox