* [PATCH] HID: cleanup help indentation in kconfig
@ 2026-06-30 14:20 Julian Braha
2026-06-30 14:33 ` sashiko-bot
0 siblings, 1 reply; 2+ messages in thread
From: Julian Braha @ 2026-06-30 14:20 UTC (permalink / raw)
To: jikos; +Cc: bentiss, linux-input, linux-kernel, Julian Braha
The indentation in this kconfig was all over the place:
Half of the 'help' texts were not indented, while the other
half indented by the more standard 2 spaces shown in the
kconfig documentation.
Let's standardize to 2 spaces.
Signed-off-by: Julian Braha <julianbraha@gmail.com>
---
drivers/hid/Kconfig | 660 ++++++++++++++++++++++----------------------
1 file changed, 330 insertions(+), 330 deletions(-)
diff --git a/drivers/hid/Kconfig b/drivers/hid/Kconfig
index f9bcaeb66385..9b04ef19a4d2 100644
--- a/drivers/hid/Kconfig
+++ b/drivers/hid/Kconfig
@@ -38,77 +38,77 @@ config HID_BATTERY_STRENGTH
select POWER_SUPPLY
default n
help
- This option adds support of reporting battery strength (for HID devices
- that support this feature) through power_supply class so that userspace
- tools, such as upower, can display it.
+ This option adds support of reporting battery strength (for HID devices
+ that support this feature) through power_supply class so that userspace
+ tools, such as upower, can display it.
config HIDRAW
bool "/dev/hidraw raw HID device support"
help
- Say Y here if you want to support HID devices (from the USB
- specification standpoint) that aren't strictly user interface
- devices, like monitor controls and Uninterruptible Power Supplies.
+ Say Y here if you want to support HID devices (from the USB
+ specification standpoint) that aren't strictly user interface
+ devices, like monitor controls and Uninterruptible Power Supplies.
- This module supports these devices separately using a separate
- event interface on /dev/hidraw.
+ This module supports these devices separately using a separate
+ event interface on /dev/hidraw.
- There is also a /dev/hiddev configuration option in the USB HID
- configuration menu. In comparison to hiddev, this device does not process
- the hid events at all (no parsing, no lookups). This lets applications
- to work on raw hid events when they want to, and avoid using transport-specific
- userspace libhid/libusb libraries.
+ There is also a /dev/hiddev configuration option in the USB HID
+ configuration menu. In comparison to hiddev, this device does not process
+ the hid events at all (no parsing, no lookups). This lets applications
+ to work on raw hid events when they want to, and avoid using transport-specific
+ userspace libhid/libusb libraries.
- If unsure, say Y.
+ If unsure, say Y.
config UHID
tristate "User-space I/O driver support for HID subsystem"
default n
help
- Say Y here if you want to provide HID I/O Drivers from user-space.
- This allows to write I/O drivers in user-space and feed the data from
- the device into the kernel. The kernel parses the HID reports, loads the
- corresponding HID Device Driver or provides input devices on top of your
- user-space device.
+ Say Y here if you want to provide HID I/O Drivers from user-space.
+ This allows to write I/O drivers in user-space and feed the data from
+ the device into the kernel. The kernel parses the HID reports, loads the
+ corresponding HID Device Driver or provides input devices on top of your
+ user-space device.
- This driver cannot be used to parse HID-reports in user-space and write
- special HID-drivers. You should use hidraw for that.
- Instead, this driver allows to write the transport-layer driver in
- user-space like USB-HID and Bluetooth-HID do in kernel-space.
+ This driver cannot be used to parse HID-reports in user-space and write
+ special HID-drivers. You should use hidraw for that.
+ Instead, this driver allows to write the transport-layer driver in
+ user-space like USB-HID and Bluetooth-HID do in kernel-space.
- If unsure, say N.
+ If unsure, say N.
- To compile this driver as a module, choose M here: the
- module will be called uhid.
+ To compile this driver as a module, choose M here: the
+ module will be called uhid.
config HID_GENERIC
tristate "Generic HID driver"
default HID
help
- Support for generic devices on the HID bus. This includes most
- keyboards and mice, joysticks, tablets and digitizers.
+ Support for generic devices on the HID bus. This includes most
+ keyboards and mice, joysticks, tablets and digitizers.
- To compile this driver as a module, choose M here: the module
- will be called hid-generic.
+ To compile this driver as a module, choose M here: the module
+ will be called hid-generic.
- If unsure, say Y.
+ If unsure, say Y.
config HID_HAPTIC
bool "Haptic touchpad support"
default n
help
- Support for touchpads with force sensors and haptic actuators instead of a
- traditional button.
- Adds extra parsing and FF device for the hid multitouch driver.
- It can be used for Elan 2703 haptic touchpad.
+ Support for touchpads with force sensors and haptic actuators instead of a
+ traditional button.
+ Adds extra parsing and FF device for the hid multitouch driver.
+ It can be used for Elan 2703 haptic touchpad.
- If unsure, say N.
+ If unsure, say N.
menu "Special HID drivers"
config HID_A4TECH
tristate "A4TECH mice"
help
- Support for some A4TECH mice with two scroll wheels.
+ Support for some A4TECH mice with two scroll wheels.
config HID_ACCUTOUCH
tristate "Accutouch touch device"
@@ -118,44 +118,44 @@ config HID_ACCUTOUCH
The driver works around a problem in the reported device capabilities
which causes userspace to detect the device as a mouse rather than
- a touchscreen.
+ a touchscreen.
Say Y here if you have a Accutouch 2216 touch controller.
config HID_ACRUX
tristate "ACRUX game controller support"
help
- Say Y here if you want to enable support for ACRUX game controllers.
+ Say Y here if you want to enable support for ACRUX game controllers.
config HID_ACRUX_FF
bool "ACRUX force feedback support"
depends on HID_ACRUX
select INPUT_FF_MEMLESS
help
- Say Y here if you want to enable force feedback support for ACRUX
- game controllers.
+ Say Y here if you want to enable force feedback support for ACRUX
+ game controllers.
config HID_APPLE
tristate "Apple {i,Power,Mac}Books"
depends on LEDS_CLASS
depends on NEW_LEDS
help
- Support for some Apple devices which less or more break
- HID specification.
+ Support for some Apple devices which less or more break
+ HID specification.
- Say Y here if you want support for keyboards of Apple iBooks, PowerBooks,
- MacBooks, MacBook Pros and Apple Aluminum.
+ Say Y here if you want support for keyboards of Apple iBooks, PowerBooks,
+ MacBooks, MacBook Pros and Apple Aluminum.
config HID_APPLEIR
tristate "Apple infrared receiver"
depends on (USB_HID)
help
- Support for Apple infrared remote control. All the Apple computers from
+ Support for Apple infrared remote control. All the Apple computers from
2005 onwards include such a port, except the unibody Macbook (2009),
and Mac Pros. This receiver is also used in the Apple TV set-top box
prior to the 2010 model.
- Say Y here if you want support for Apple infrared remote control.
+ Say Y here if you want support for Apple infrared remote control.
config HID_APPLETB_BL
tristate "Apple Touch Bar Backlight"
@@ -191,34 +191,34 @@ config HID_ASUS
depends on ASUS_WMI || ASUS_WMI=n
select POWER_SUPPLY
help
- Support for Asus notebook built-in keyboard and touchpad via i2c, and
- the Asus Republic of Gamers laptop keyboard special keys.
+ Support for Asus notebook built-in keyboard and touchpad via i2c, and
+ the Asus Republic of Gamers laptop keyboard special keys.
- Supported devices:
- - EeeBook X205TA
- - VivoBook E200HA
- - GL553V series
- - GL753V series
+ Supported devices:
+ - EeeBook X205TA
+ - VivoBook E200HA
+ - GL553V series
+ - GL753V series
config HID_AUREAL
tristate "Aureal"
help
- Support for Aureal Cy se W-01RN Remote Controller and other Aureal derived remotes.
+ Support for Aureal Cy se W-01RN Remote Controller and other Aureal derived remotes.
config HID_BELKIN
tristate "Belkin Flip KVM and Wireless keyboard"
help
- Support for Belkin Flip KVM and Wireless keyboard.
+ Support for Belkin Flip KVM and Wireless keyboard.
config HID_BETOP_FF
tristate "Betop Production Inc. force feedback support"
depends on USB_HID
select INPUT_FF_MEMLESS
help
- Say Y here if you want to enable force feedback support for devices by
- BETOP Production Ltd.
- Currently the following devices are known to be supported:
- - BETOP 2185 PC & BFM MODE
+ Say Y here if you want to enable force feedback support for devices by
+ BETOP Production Ltd.
+ Currently the following devices are known to be supported:
+ - BETOP 2185 PC & BFM MODE
config HID_BIGBEN_FF
tristate "BigBen Interactive Kids' gamepad support"
@@ -235,54 +235,54 @@ config HID_BIGBEN_FF
config HID_CHERRY
tristate "Cherry Cymotion keyboard"
help
- Support for Cherry Cymotion keyboard.
+ Support for Cherry Cymotion keyboard.
config HID_CHICONY
tristate "Chicony devices"
depends on USB_HID
help
- Support for Chicony Tactical pad and special keys on Chicony keyboards.
+ Support for Chicony Tactical pad and special keys on Chicony keyboards.
config HID_CORSAIR
tristate "Corsair devices"
depends on USB_HID && LEDS_CLASS
select POWER_SUPPLY
help
- Support for Corsair devices that are not fully compliant with the
- HID standard.
- Support for Corsair Void headsets.
+ Support for Corsair devices that are not fully compliant with the
+ HID standard.
+ Support for Corsair Void headsets.
- Supported devices:
- - Vengeance K90
- - Scimitar PRO RGB
- - Corsair Void headsets
+ Supported devices:
+ - Vengeance K90
+ - Scimitar PRO RGB
+ - Corsair Void headsets
config HID_COUGAR
tristate "Cougar devices"
help
- Support for Cougar devices that are not fully compliant with the
- HID standard.
+ Support for Cougar devices that are not fully compliant with the
+ HID standard.
- Supported devices:
- - Cougar 500k Gaming Keyboard
+ Supported devices:
+ - Cougar 500k Gaming Keyboard
config HID_MACALLY
tristate "Macally devices"
help
- Support for Macally devices that are not fully compliant with the
- HID standard.
+ Support for Macally devices that are not fully compliant with the
+ HID standard.
- supported devices:
- - Macally ikey keyboard
+ supported devices:
+ - Macally ikey keyboard
config HID_PRODIKEYS
tristate "Prodikeys PC-MIDI Keyboard support"
depends on USB_HID && SND
select SND_RAWMIDI
help
- Support for Prodikeys PC-MIDI Keyboard device support.
- Say Y here to enable support for this device.
- - Prodikeys PC-MIDI keyboard.
+ Support for Prodikeys PC-MIDI Keyboard device support.
+ Say Y here to enable support for this device.
+ - Prodikeys PC-MIDI keyboard.
The Prodikeys PC-MIDI acts as a USB Audio device, with one MIDI
input and one MIDI output. These MIDI jacks appear as
a sound "card" in the ALSA sound system.
@@ -293,97 +293,97 @@ config HID_PRODIKEYS
config HID_CMEDIA
tristate "CMedia audio chips"
help
- Support for CMedia CM6533 HID audio jack controls
- and HS100B mute buttons.
+ Support for CMedia CM6533 HID audio jack controls
+ and HS100B mute buttons.
config HID_CP2112
tristate "Silicon Labs CP2112 HID USB-to-SMBus Bridge support"
depends on USB_HID && HIDRAW && I2C && GPIOLIB
select GPIOLIB_IRQCHIP
help
- Support for Silicon Labs CP2112 HID USB to SMBus Master Bridge.
- This is a HID device driver which registers as an i2c adapter
- and gpiochip to expose these functions of the CP2112. The
- customizable USB descriptor fields are exposed as sysfs attributes.
+ Support for Silicon Labs CP2112 HID USB to SMBus Master Bridge.
+ This is a HID device driver which registers as an i2c adapter
+ and gpiochip to expose these functions of the CP2112. The
+ customizable USB descriptor fields are exposed as sysfs attributes.
config HID_CREATIVE_SB0540
tristate "Creative SB0540 infrared receiver"
depends on USB_HID
help
- Support for Creative infrared SB0540-compatible remote controls, such
- as the RM-1500 and RM-1800 remotes.
+ Support for Creative infrared SB0540-compatible remote controls, such
+ as the RM-1500 and RM-1800 remotes.
- Say Y here if you want support for Creative SB0540 infrared receiver.
+ Say Y here if you want support for Creative SB0540 infrared receiver.
config HID_CYPRESS
tristate "Cypress mouse and barcode readers"
help
- Support for cypress mouse and barcode readers.
+ Support for cypress mouse and barcode readers.
config HID_DRAGONRISE
tristate "DragonRise Inc. game controller"
help
- Say Y here if you have DragonRise Inc. game controllers.
- These might be branded as:
- - Tesun USB-703
- - Media-tech MT1504 "Rogue"
- - DVTech JS19 "Gear"
- - Defender Game Master
+ Say Y here if you have DragonRise Inc. game controllers.
+ These might be branded as:
+ - Tesun USB-703
+ - Media-tech MT1504 "Rogue"
+ - DVTech JS19 "Gear"
+ - Defender Game Master
config DRAGONRISE_FF
bool "DragonRise Inc. force feedback"
depends on HID_DRAGONRISE
select INPUT_FF_MEMLESS
help
- Say Y here if you want to enable force feedback support for DragonRise Inc.
- game controllers.
+ Say Y here if you want to enable force feedback support for DragonRise Inc.
+ game controllers.
config HID_EMS_FF
tristate "EMS Production Inc. force feedback support"
select INPUT_FF_MEMLESS
help
- Say Y here if you want to enable force feedback support for devices by
- EMS Production Ltd.
- Currently the following devices are known to be supported:
- - Trio Linker Plus II
+ Say Y here if you want to enable force feedback support for devices by
+ EMS Production Ltd.
+ Currently the following devices are known to be supported:
+ - Trio Linker Plus II
config HID_ELAN
tristate "ELAN USB Touchpad Support"
depends on LEDS_CLASS && USB_HID
help
- Say Y to enable support for the USB ELAN touchpad
- Currently the following devices are known to be supported:
- - HP Pavilion X2 10-p0XX.
+ Say Y to enable support for the USB ELAN touchpad
+ Currently the following devices are known to be supported:
+ - HP Pavilion X2 10-p0XX.
config HID_ELECOM
tristate "ELECOM HID devices"
help
- Support for ELECOM devices:
- - BM084 Bluetooth Mouse
- - EX-G Trackballs (M-XT3DRBK, M-XT3URBK)
- - DEFT Trackballs (M-DT1DRBK, M-DT1URBK, M-DT2DRBK, M-DT2URBK)
- - HUGE Trackballs (M-HT1DRBK, M-HT1URBK)
- - HUGE Plus Trackball (M-HT1MRBK)
+ Support for ELECOM devices:
+ - BM084 Bluetooth Mouse
+ - EX-G Trackballs (M-XT3DRBK, M-XT3URBK)
+ - DEFT Trackballs (M-DT1DRBK, M-DT1URBK, M-DT2DRBK, M-DT2URBK)
+ - HUGE Trackballs (M-HT1DRBK, M-HT1URBK)
+ - HUGE Plus Trackball (M-HT1MRBK)
config HID_ELO
tristate "ELO USB 4000/4500 touchscreen"
depends on USB_HID
help
- Support for the ELO USB 4000/4500 touchscreens. Note that this is for
- different devices than those handled by CONFIG_TOUCHSCREEN_USB_ELO.
+ Support for the ELO USB 4000/4500 touchscreens. Note that this is for
+ different devices than those handled by CONFIG_TOUCHSCREEN_USB_ELO.
config HID_EVISION
tristate "EVision Keyboards Support"
depends on HID
help
- Support for some EVision keyboards. Note that this is needed only when
- applying customization using userspace programs.
- Support for some EVision devices requiring report descriptor fixups.
+ Support for some EVision keyboards. Note that this is needed only when
+ applying customization using userspace programs.
+ Support for some EVision devices requiring report descriptor fixups.
config HID_EZKEY
tristate "Ezkey BTC 8193 keyboard"
help
- Support for Ezkey BTC 8193 keyboard.
+ Support for Ezkey BTC 8193 keyboard.
config HID_FT260
tristate "FTDI FT260 USB HID to I2C host support"
@@ -399,12 +399,12 @@ config HID_FT260
config HID_GEMBIRD
tristate "Gembird Joypad"
help
- Support for Gembird JPD-DualForce 2.
+ Support for Gembird JPD-DualForce 2.
config HID_GFRM
tristate "Google Fiber TV Box remote control support"
help
- Support for Google Fiber TV Box remote controls
+ Support for Google Fiber TV Box remote controls
config HID_GLORIOUS
tristate "Glorious PC Gaming Race mice"
@@ -416,14 +416,14 @@ config HID_HOLTEK
tristate "Holtek HID devices"
depends on USB_HID
help
- Support for Holtek based devices:
- - Holtek On Line Grip based game controller
- - Trust GXT 18 Gaming Keyboard
- - Sharkoon Drakonia / Perixx MX-2000 gaming mice
- - Tracer Sniper TRM-503 / NOVA Gaming Slider X200 /
- Zalman ZM-GM1
- - SHARKOON DarkGlider Gaming mouse
- - LEETGION Hellion Gaming Mouse
+ Support for Holtek based devices:
+ - Holtek On Line Grip based game controller
+ - Trust GXT 18 Gaming Keyboard
+ - Sharkoon Drakonia / Perixx MX-2000 gaming mice
+ - Tracer Sniper TRM-503 / NOVA Gaming Slider X200 /
+ Zalman ZM-GM1
+ - SHARKOON DarkGlider Gaming mouse
+ - LEETGION Hellion Gaming Mouse
config HOLTEK_FF
bool "Holtek On Line Grip force feedback support"
@@ -452,14 +452,14 @@ config HID_GOOGLE_HAMMER
select INPUT_VIVALDIFMAP
depends on USB_HID && LEDS_CLASS && CROS_EC
help
- Say Y here if you have a Google Hammer device.
+ Say Y here if you have a Google Hammer device.
config HID_GOOGLE_STADIA_FF
tristate "Google Stadia force feedback"
select INPUT_FF_MEMLESS
help
- Say Y here if you want to enable force feedback support for the Google
- Stadia controller.
+ Say Y here if you want to enable force feedback support for the Google
+ Stadia controller.
config HID_VIVALDI
tristate "Vivaldi Keyboard"
@@ -475,51 +475,51 @@ config HID_GT683R
tristate "MSI GT68xR LED support"
depends on LEDS_CLASS && USB_HID
help
- Say Y here if you want to enable support for the three MSI GT68xR LEDs
+ Say Y here if you want to enable support for the three MSI GT68xR LEDs
- This driver support following modes:
- - Normal: LEDs are fully on when enabled
- - Audio: LEDs brightness depends on sound level
- - Breathing: LEDs brightness varies at human breathing rate
+ This driver support following modes:
+ - Normal: LEDs are fully on when enabled
+ - Audio: LEDs brightness depends on sound level
+ - Breathing: LEDs brightness varies at human breathing rate
- Currently the following devices are know to be supported:
- - MSI GT683R
+ Currently the following devices are know to be supported:
+ - MSI GT683R
config HID_KEYTOUCH
tristate "Keytouch HID devices"
help
- Support for Keytouch HID devices not fully compliant with
- the specification. Currently supported:
+ Support for Keytouch HID devices not fully compliant with
+ the specification. Currently supported:
- Keytouch IEC 60945
config HID_KYE
tristate "KYE/Genius devices"
help
- Support for KYE/Genius devices not fully compliant with HID standard:
- - Ergo Mouse
- - EasyPen i405X tablet
- - MousePen i608X tablet
- - EasyPen M610X tablet
+ Support for KYE/Genius devices not fully compliant with HID standard:
+ - Ergo Mouse
+ - EasyPen i405X tablet
+ - MousePen i608X tablet
+ - EasyPen M610X tablet
config HID_KYSONA
tristate "Kysona devices"
depends on USB_HID
help
- Support for Kysona mice.
+ Support for Kysona mice.
- Say Y here if you have a Kysona M600 mouse
- and want to be able to read its battery capacity.
+ Say Y here if you have a Kysona M600 mouse
+ and want to be able to read its battery capacity.
config HID_UCLOGIC
tristate "UC-Logic"
depends on USB_HID
help
- Support for UC-Logic and Huion tablets.
+ Support for UC-Logic and Huion tablets.
config HID_WALTOP
tristate "Waltop"
help
- Support for Waltop tablets.
+ Support for Waltop tablets.
config HID_VIEWSONIC
tristate "ViewSonic/Signotec"
@@ -530,11 +530,11 @@ config HID_VRC2
tristate "VRC-2 Car Controller"
depends on HID
help
- Support for VRC-2 which is a 2-axis controller often used in
- car simulators.
+ Support for VRC-2 which is a 2-axis controller often used in
+ car simulators.
- To compile this driver as a module, choose M here: the
- module will be called hid-vrc2.
+ To compile this driver as a module, choose M here: the
+ module will be called hid-vrc2.
config HID_XIAOMI
tristate "Xiaomi"
@@ -545,95 +545,95 @@ config HID_XIAOMI
config HID_GYRATION
tristate "Gyration remote control"
help
- Support for Gyration remote control.
+ Support for Gyration remote control.
config HID_ICADE
tristate "ION iCade arcade controller"
help
- Support for the ION iCade arcade controller to work as a joystick.
+ Support for the ION iCade arcade controller to work as a joystick.
- To compile this driver as a module, choose M here: the
- module will be called hid-icade.
+ To compile this driver as a module, choose M here: the
+ module will be called hid-icade.
config HID_ITE
tristate "ITE devices"
help
- Support for ITE devices not fully compliant with HID standard.
+ Support for ITE devices not fully compliant with HID standard.
config HID_JABRA
tristate "Jabra USB HID Driver"
help
- Support for Jabra USB HID devices.
+ Support for Jabra USB HID devices.
- Prevents mapping of vendor defined HID usages to input events. Without
- this driver HID reports from Jabra devices may incorrectly be seen as
- mouse button events.
- Say M here if you may ever plug in a Jabra USB device.
+ Prevents mapping of vendor defined HID usages to input events. Without
+ this driver HID reports from Jabra devices may incorrectly be seen as
+ mouse button events.
+ Say M here if you may ever plug in a Jabra USB device.
config HID_TWINHAN
tristate "Twinhan IR remote control"
help
- Support for Twinhan IR remote control.
+ Support for Twinhan IR remote control.
config HID_KENSINGTON
tristate "Kensington Slimblade Trackball"
help
- Support for Kensington Slimblade Trackball.
+ Support for Kensington Slimblade Trackball.
config HID_LCPOWER
tristate "LC-Power"
help
- Support for LC-Power RC1000MCE RF remote control.
+ Support for LC-Power RC1000MCE RF remote control.
config HID_LED
tristate "Simple RGB LED support"
depends on LEDS_CLASS
help
- Support for simple RGB LED devices. Currently supported are:
- - Riso Kagaku Webmail Notifier
- - Dream Cheeky Webmail Notifier and Friends Alert
- - ThingM blink(1)
- - Delcom Visual Signal Indicator Generation 2
- - Greynut Luxafor
+ Support for simple RGB LED devices. Currently supported are:
+ - Riso Kagaku Webmail Notifier
+ - Dream Cheeky Webmail Notifier and Friends Alert
+ - ThingM blink(1)
+ - Delcom Visual Signal Indicator Generation 2
+ - Greynut Luxafor
- To compile this driver as a module, choose M here: the
- module will be called hid-led.
+ To compile this driver as a module, choose M here: the
+ module will be called hid-led.
config HID_LENOVO
tristate "Lenovo / Thinkpad devices"
depends on LEDS_CLASS
help
- Support for IBM/Lenovo devices that are not fully compliant with HID standard.
+ Support for IBM/Lenovo devices that are not fully compliant with HID standard.
- Say Y if you want support for horizontal scrolling of the IBM/Lenovo
- Scrollpoint mice or the non-compliant features of the Lenovo Thinkpad
- standalone keyboards, e.g:
- - ThinkPad USB Keyboard with TrackPoint (supports extra LEDs and trackpoint
- configuration)
- - ThinkPad Compact Bluetooth Keyboard with TrackPoint (supports Fn keys)
- - ThinkPad Compact USB Keyboard with TrackPoint (supports Fn keys)
+ Say Y if you want support for horizontal scrolling of the IBM/Lenovo
+ Scrollpoint mice or the non-compliant features of the Lenovo Thinkpad
+ standalone keyboards, e.g:
+ - ThinkPad USB Keyboard with TrackPoint (supports extra LEDs and trackpoint
+ configuration)
+ - ThinkPad Compact Bluetooth Keyboard with TrackPoint (supports Fn keys)
+ - ThinkPad Compact USB Keyboard with TrackPoint (supports Fn keys)
config HID_LENOVO_GO
tristate "HID Driver for Lenovo Legion Go Series Controllers"
depends on USB_HID
depends on LEDS_CLASS_MULTICOLOR
help
- Support for Lenovo Legion Go devices with detachable controllers.
+ Support for Lenovo Legion Go devices with detachable controllers.
- Say Y here to include configuration interface support for the Lenovo Legion Go
- and Legion Go 2 Handheld Console Controllers. Say M here to compile this
- driver as a module. The module will be called hid-lenovo-go.
+ Say Y here to include configuration interface support for the Lenovo Legion Go
+ and Legion Go 2 Handheld Console Controllers. Say M here to compile this
+ driver as a module. The module will be called hid-lenovo-go.
config HID_LENOVO_GO_S
tristate "HID Driver for Lenovo Legion Go S Controller"
depends on USB_HID
depends on LEDS_CLASS_MULTICOLOR
help
- Support for Lenovo Legion Go S Handheld Console Controller.
+ Support for Lenovo Legion Go S Handheld Console Controller.
- Say Y here to include configuration interface support for the Lenovo Legion Go
- S. Say M here to compile this driver as a module. The module will be called
- hid-lenovo-go-s.
+ Say Y here to include configuration interface support for the Lenovo Legion Go
+ S. Say M here to compile this driver as a module. The module will be called
+ hid-lenovo-go-s.
config HID_LETSKETCH
tristate "Letsketch WP9620N tablets"
@@ -655,7 +655,7 @@ config HID_LOGITECH
depends on LEDS_CLASS
depends on LEDS_CLASS_MULTICOLOR
help
- Support for Logitech devices that are not fully compliant with HID standard.
+ Support for Logitech devices that are not fully compliant with HID standard.
config HID_LOGITECH_DJ
tristate "Logitech receivers full support"
@@ -664,23 +664,23 @@ config HID_LOGITECH_DJ
depends on HID_LOGITECH
select HID_LOGITECH_HIDPP
help
- Say Y if you want support for Logitech receivers and devices.
- Logitech receivers are capable of pairing multiple Logitech compliant
- devices to the same receiver. Without this driver it will be handled by
- generic USB_HID driver and all incoming events will be multiplexed
- into a single mouse and a single keyboard device.
+ Say Y if you want support for Logitech receivers and devices.
+ Logitech receivers are capable of pairing multiple Logitech compliant
+ devices to the same receiver. Without this driver it will be handled by
+ generic USB_HID driver and all incoming events will be multiplexed
+ into a single mouse and a single keyboard device.
config HID_LOGITECH_HIDPP
tristate "Logitech HID++ devices support"
depends on HID_LOGITECH
select POWER_SUPPLY
help
- Support for Logitech devices relying on the HID++ Logitech specification
+ Support for Logitech devices relying on the HID++ Logitech specification
- Say Y if you want support for Logitech devices relying on the HID++
- specification. Such devices are the various Logitech Touchpads (T650,
- T651, TK820), some mice (Zone Touch mouse), or even keyboards (Solar
- Keyboard).
+ Say Y if you want support for Logitech devices relying on the HID++
+ specification. Such devices are the various Logitech Touchpads (T650,
+ T651, TK820), some mice (Zone Touch mouse), or even keyboards (Solar
+ Keyboard).
config LOGITECH_FF
bool "Logitech force feedback support"
@@ -740,31 +740,31 @@ config LOGIWHEELS_FF
config HID_MAGICMOUSE
tristate "Apple Magic Mouse/Trackpad multi-touch support"
help
- Support for the Apple Magic Mouse/Trackpad multi-touch.
+ Support for the Apple Magic Mouse/Trackpad multi-touch.
- Say Y here if you want support for the multi-touch features of the
- Apple Wireless "Magic" Mouse and the Apple Wireless "Magic" Trackpad.
+ Say Y here if you want support for the multi-touch features of the
+ Apple Wireless "Magic" Mouse and the Apple Wireless "Magic" Trackpad.
config HID_MALTRON
tristate "Maltron L90 keyboard"
help
- Adds support for the volume up, volume down, mute, and play/pause buttons
- of the Maltron L90 keyboard.
+ Adds support for the volume up, volume down, mute, and play/pause buttons
+ of the Maltron L90 keyboard.
config HID_MAYFLASH
tristate "Mayflash game controller adapter force feedback"
select INPUT_FF_MEMLESS
help
- Say Y here if you have HJZ Mayflash PS3 game controller adapters
- and want to enable force feedback support.
+ Say Y here if you have HJZ Mayflash PS3 game controller adapters
+ and want to enable force feedback support.
config HID_MEGAWORLD_FF
tristate "Mega World based game controller force feedback support"
depends on USB_HID
select INPUT_FF_MEMLESS
help
- Say Y here if you have a Mega World based game controller and want
- to have force feedback support for it.
+ Say Y here if you have a Mega World based game controller and want
+ to have force feedback support for it.
config HID_RAKK
tristate "Rakk support"
@@ -778,18 +778,18 @@ config HID_RAKK
config HID_REDRAGON
tristate "Redragon keyboards"
help
- Support for Redragon keyboards that need fix-ups to work properly.
+ Support for Redragon keyboards that need fix-ups to work properly.
config HID_MICROSOFT
tristate "Microsoft non-fully HID-compliant devices"
select INPUT_FF_MEMLESS
help
- Support for Microsoft devices that are not fully compliant with HID standard.
+ Support for Microsoft devices that are not fully compliant with HID standard.
config HID_MONTEREY
tristate "Monterey Genius KB29E keyboard"
help
- Support for Monterey Genius KB29E.
+ Support for Monterey Genius KB29E.
config HID_MULTITOUCH
tristate "HID Multitouch panels"
@@ -843,35 +843,35 @@ config HID_NINTENDO
depends on LEDS_CLASS
select POWER_SUPPLY
help
- Adds support for the Nintendo Switch Joy-Cons, NSO, Pro Controller.
- All controllers support bluetooth, and the Pro Controller also supports
- its USB mode. This also includes support for the Nintendo Switch Online
- Controllers which include the NES, Genesis, SNES, and N64 controllers.
+ Adds support for the Nintendo Switch Joy-Cons, NSO, Pro Controller.
+ All controllers support bluetooth, and the Pro Controller also supports
+ its USB mode. This also includes support for the Nintendo Switch Online
+ Controllers which include the NES, Genesis, SNES, and N64 controllers.
- To compile this driver as a module, choose M here: the
- module will be called hid-nintendo.
+ To compile this driver as a module, choose M here: the
+ module will be called hid-nintendo.
config NINTENDO_FF
bool "Nintendo Switch controller force feedback support"
depends on HID_NINTENDO
select INPUT_FF_MEMLESS
help
- Say Y here if you have a Nintendo Switch controller and want to enable
- force feedback support for it. This works for both joy-cons, the pro
- controller, and the NSO N64 controller. For the pro controller, both
- rumble motors can be controlled individually.
+ Say Y here if you have a Nintendo Switch controller and want to enable
+ force feedback support for it. This works for both joy-cons, the pro
+ controller, and the NSO N64 controller. For the pro controller, both
+ rumble motors can be controlled individually.
config HID_NTI
tristate "NTI keyboard adapters"
help
- Support for the "extra" Sun keyboard keys on keyboards attached
- through Network Technologies USB-SUN keyboard adapters.
+ Support for the "extra" Sun keyboard keys on keyboards attached
+ through Network Technologies USB-SUN keyboard adapters.
config HID_NTRIG
tristate "N-Trig touch screen"
depends on USB_HID
help
- Support for N-Trig touch screen.
+ Support for N-Trig touch screen.
config HID_NVIDIA_SHIELD
tristate "NVIDIA SHIELD devices"
@@ -896,14 +896,14 @@ config NVIDIA_SHIELD_FF
config HID_ORTEK
tristate "Ortek PKB-1700/WKB-2000/Skycable wireless keyboard and mouse trackpad"
help
- There are certain devices which have LogicalMaximum wrong in the keyboard
- usage page of their report descriptor. The most prevailing ones so far
- are manufactured by Ortek, thus the name of the driver. Currently
- supported devices by this driver are
+ There are certain devices which have LogicalMaximum wrong in the keyboard
+ usage page of their report descriptor. The most prevailing ones so far
+ are manufactured by Ortek, thus the name of the driver. Currently
+ supported devices by this driver are
- - Ortek PKB-1700
- - Ortek WKB-2000
- - Skycable wireless presenter
+ - Ortek PKB-1700
+ - Ortek WKB-2000
+ - Skycable wireless presenter
config HID_OXP
tristate "OneXPlayer handheld controller configuration support"
@@ -946,7 +946,7 @@ config HID_PENMOUNT
config HID_PETALYNX
tristate "Petalynx Maxter remote control"
help
- Support for Petalynx Maxter remote control.
+ Support for Petalynx Maxter remote control.
config HID_PICOLCD
tristate "PicoLCD (graphic version)"
@@ -1038,77 +1038,77 @@ config PLAYSTATION_FF
PlayStation game controllers.
config HID_PXRC
- tristate "PhoenixRC HID Flight Controller"
- depends on HID
- help
- Support for PhoenixRC HID Flight Controller, a 8-axis flight controller.
+ tristate "PhoenixRC HID Flight Controller"
+ depends on HID
+ help
+ Support for PhoenixRC HID Flight Controller, a 8-axis flight controller.
- To compile this driver as a module, choose M here: the
- module will be called hid-pxrc.
+ To compile this driver as a module, choose M here: the
+ module will be called hid-pxrc.
config HID_RAPOO
tristate "Rapoo non-fully HID-compliant devices"
help
- Support for Rapoo devices that are not fully compliant with the
- HID standard.
+ Support for Rapoo devices that are not fully compliant with the
+ HID standard.
config HID_RAZER
tristate "Razer non-fully HID-compliant devices"
help
- Support for Razer devices that are not fully compliant with the
- HID standard.
+ Support for Razer devices that are not fully compliant with the
+ HID standard.
config HID_PRIMAX
tristate "Primax non-fully HID-compliant devices"
help
- Support for Primax devices that are not fully compliant with the
- HID standard.
+ Support for Primax devices that are not fully compliant with the
+ HID standard.
config HID_RETRODE
tristate "Retrode 2 USB adapter for vintage video games"
depends on USB_HID
help
- Support for
- * Retrode 2 cartridge and controller adapter
+ Support for
+ * Retrode 2 cartridge and controller adapter
config HID_ROCCAT
tristate "Roccat device support"
depends on USB_HID
help
- Support for Roccat devices.
- Say Y here if you have a Roccat mouse or keyboard and want
- support for its special functionalities.
+ Support for Roccat devices.
+ Say Y here if you have a Roccat mouse or keyboard and want
+ support for its special functionalities.
config HID_SAITEK
tristate "Saitek (Mad Catz) non-fully HID-compliant devices"
help
- Support for Saitek devices that are not fully compliant with the
- HID standard.
+ Support for Saitek devices that are not fully compliant with the
+ HID standard.
- Supported devices:
- - PS1000 Dual Analog Pad
- - Saitek R.A.T.7, R.A.T.9, M.M.O.7 Gaming Mice
- - Mad Catz R.A.T.5, R.A.T.9 Gaming Mice
+ Supported devices:
+ - PS1000 Dual Analog Pad
+ - Saitek R.A.T.7, R.A.T.9, M.M.O.7 Gaming Mice
+ - Mad Catz R.A.T.5, R.A.T.9 Gaming Mice
config HID_SAMSUNG
tristate "Samsung InfraRed remote control or keyboards"
depends on USB_HID
help
- Support for Samsung InfraRed remote control or keyboards.
+ Support for Samsung InfraRed remote control or keyboards.
config HID_SEMITEK
tristate "Semitek USB keyboards"
help
- Support for Semitek USB keyboards that are not fully compliant
- with the HID standard.
+ Support for Semitek USB keyboards that are not fully compliant
+ with the HID standard.
- There are many variants, including:
- - GK61, GK64, GK68, GK84, GK96, etc.
- - SK61, SK64, SK68, SK84, SK96, etc.
- - Dierya DK61/DK66
- - Tronsmart TK09R
- - Woo-dy
- - X-Bows Nature/Knight
+ There are many variants, including:
+ - GK61, GK64, GK68, GK84, GK96, etc.
+ - SK61, SK64, SK68, SK84, SK96, etc.
+ - Dierya DK61/DK66
+ - Tronsmart TK09R
+ - Woo-dy
+ - X-Bows Nature/Knight
config HID_SIGMAMICRO
tristate "SiGma Micro-based keyboards"
@@ -1128,58 +1128,58 @@ config HID_SONY
select POWER_SUPPLY
select CRC32
help
- Support for
+ Support for
- * Sixaxis controllers for PS3
- * Buzz controllers
- * Blu-ray Disc Remote Control for PS3
- * Logitech Harmony adapter for PS3
- * Guitar Hero Live PS3, Wii U and PS4 guitars
- * Guitar Hero PS3 and PC guitars
- * Rock Band 1, 2 and 3 PS3 and Wii instruments
- * Rock Band 4 PS4 and PS5 guitars
- * DJ Hero Turntable for PS3
+ * Sixaxis controllers for PS3
+ * Buzz controllers
+ * Blu-ray Disc Remote Control for PS3
+ * Logitech Harmony adapter for PS3
+ * Guitar Hero Live PS3, Wii U and PS4 guitars
+ * Guitar Hero PS3 and PC guitars
+ * Rock Band 1, 2 and 3 PS3 and Wii instruments
+ * Rock Band 4 PS4 and PS5 guitars
+ * DJ Hero Turntable for PS3
config SONY_FF
bool "Sony PS2/3/4 accessories force feedback support"
depends on HID_SONY
select INPUT_FF_MEMLESS
help
- Say Y here if you have a Sony PS2/3/4 accessory and want to enable
- force feedback support for it.
+ Say Y here if you have a Sony PS2/3/4 accessory and want to enable
+ force feedback support for it.
config HID_SPEEDLINK
tristate "Speedlink VAD Cezanne mouse support"
help
- Support for Speedlink Vicious and Divine Cezanne mouse.
+ Support for Speedlink Vicious and Divine Cezanne mouse.
config HID_STEAM
tristate "Steam Controller/Deck support"
select POWER_SUPPLY
help
- Say Y here if you have a Steam Controller or Deck if you want to use it
- without running the Steam Client. It supports both the wired and
- the wireless adaptor.
+ Say Y here if you have a Steam Controller or Deck if you want to use it
+ without running the Steam Client. It supports both the wired and
+ the wireless adaptor.
config STEAM_FF
bool "Steam Deck force feedback support"
depends on HID_STEAM
select INPUT_FF_MEMLESS
help
- Say Y here if you want to enable force feedback support for the Steam
- Deck.
+ Say Y here if you want to enable force feedback support for the Steam
+ Deck.
config HID_STEELSERIES
tristate "Steelseries devices support"
depends on USB_HID
help
- Support for Steelseries SRW-S1 steering wheel, and the Steelseries
- Arctis 1 Wireless for XBox headset.
+ Support for Steelseries SRW-S1 steering wheel, and the Steelseries
+ Arctis 1 Wireless for XBox headset.
config HID_SUNPLUS
tristate "Sunplus wireless desktop"
help
- Support for Sunplus wireless desktop.
+ Support for Sunplus wireless desktop.
config HID_RMI
tristate "Synaptics RMI4 device support"
@@ -1190,9 +1190,9 @@ config HID_RMI
select RMI4_F30
select RMI4_F3A
help
- Support for Synaptics RMI4 touchpads.
- Say Y here if you have a Synaptics RMI4 touchpads over i2c-hid or usbhid
- and want support for its special functionalities.
+ Support for Synaptics RMI4 touchpads.
+ Say Y here if you have a Synaptics RMI4 touchpads over i2c-hid or usbhid
+ and want support for its special functionalities.
config HID_GREENASIA
tristate "GreenAsia (Product ID 0x12) game controller support"
@@ -1205,43 +1205,43 @@ config GREENASIA_FF
depends on HID_GREENASIA
select INPUT_FF_MEMLESS
help
- Say Y here if you have a GreenAsia (Product ID 0x12) based game controller
- (like MANTA Warrior MM816 and SpeedLink Strike2 SL-6635) or adapter
- and want to enable force feedback support for it.
+ Say Y here if you have a GreenAsia (Product ID 0x12) based game controller
+ (like MANTA Warrior MM816 and SpeedLink Strike2 SL-6635) or adapter
+ and want to enable force feedback support for it.
config HID_HYPERV_MOUSE
tristate "Microsoft Hyper-V mouse driver"
depends on HYPERV_VMBUS
help
- Select this option to enable the Hyper-V mouse driver.
+ Select this option to enable the Hyper-V mouse driver.
config HID_SMARTJOYPLUS
tristate "SmartJoy PLUS PS2/USB adapter support"
help
- Support for SmartJoy PLUS PS2/USB adapter, Super Dual Box,
- Super Joy Box 3 Pro, Super Dual Box Pro, and Super Joy Box 5 Pro.
+ Support for SmartJoy PLUS PS2/USB adapter, Super Dual Box,
+ Super Joy Box 3 Pro, Super Dual Box Pro, and Super Joy Box 5 Pro.
- Note that DDR (Dance Dance Revolution) mode is not supported, nor
- is pressure sensitive buttons on the pro models.
+ Note that DDR (Dance Dance Revolution) mode is not supported, nor
+ is pressure sensitive buttons on the pro models.
config SMARTJOYPLUS_FF
bool "SmartJoy PLUS PS2/USB adapter force feedback support"
depends on HID_SMARTJOYPLUS
select INPUT_FF_MEMLESS
help
- Say Y here if you have a SmartJoy PLUS PS2/USB adapter and want to
- enable force feedback support for it.
+ Say Y here if you have a SmartJoy PLUS PS2/USB adapter and want to
+ enable force feedback support for it.
config HID_TIVO
tristate "TiVo Slide Bluetooth remote control support"
help
- Say Y if you have a TiVo Slide Bluetooth remote control.
+ Say Y if you have a TiVo Slide Bluetooth remote control.
config HID_TOPSEED
tristate "TopSeed Cyberlink, BTC Emprex, Conceptronic remote control support"
help
- Say Y if you have a TopSeed Cyberlink or BTC Emprex or Conceptronic
- CLLRCMCE remote control.
+ Say Y if you have a TopSeed Cyberlink or BTC Emprex or Conceptronic
+ CLLRCMCE remote control.
config HID_TOPRE
tristate "Topre REALFORCE keyboards"
@@ -1255,9 +1255,9 @@ config HID_THINGM
depends on LEDS_CLASS
select HID_LED
help
- Support for the ThingM blink(1) USB RGB LED. This driver has been
- merged into the generic hid led driver. Config symbol HID_THINGM
- just selects HID_LED and will be removed soon.
+ Support for the ThingM blink(1) USB RGB LED. This driver has been
+ merged into the generic hid led driver. Config symbol HID_THINGM
+ just selects HID_LED and will be removed soon.
config HID_THRUSTMASTER
tristate "ThrustMaster devices support"
@@ -1332,23 +1332,23 @@ config HID_WIIMOTE
select POWER_SUPPLY
select INPUT_FF_MEMLESS
help
- Support for Nintendo Wii and Wii U Bluetooth peripherals. Supported
- devices are the Wii Remote and its extension devices, but also devices
- based on the Wii Remote like the Wii U Pro Controller or the
- Wii Balance Board.
+ Support for Nintendo Wii and Wii U Bluetooth peripherals. Supported
+ devices are the Wii Remote and its extension devices, but also devices
+ based on the Wii Remote like the Wii U Pro Controller or the
+ Wii Balance Board.
- Support for all official Nintendo extensions is available, however, 3rd
- party extensions might not be supported. Please report these devices to:
+ Support for all official Nintendo extensions is available, however, 3rd
+ party extensions might not be supported. Please report these devices to:
http://github.com/dvdhrm/xwiimote/issues
- Other Nintendo Wii U peripherals that are IEEE 802.11 based (including
- the Wii U Gamepad) might be supported in the future. But currently
- support is limited to Bluetooth based devices.
+ Other Nintendo Wii U peripherals that are IEEE 802.11 based (including
+ the Wii U Gamepad) might be supported in the future. But currently
+ support is limited to Bluetooth based devices.
- If unsure, say N.
+ If unsure, say N.
- To compile this driver as a module, choose M here: the
- module will be called hid-wiimote.
+ To compile this driver as a module, choose M here: the
+ module will be called hid-wiimote.
config HID_WINWING
tristate "WinWing Orion2 throttle support"
@@ -1371,9 +1371,9 @@ config HID_WINWING
config HID_XINMO
tristate "Xin-Mo non-fully compliant devices"
help
- Support for Xin-Mo devices that are not fully compliant with the HID
- standard. Currently only supports the Xin-Mo Dual Arcade. Say Y here
- if you have a Xin-Mo Dual Arcade controller.
+ Support for Xin-Mo devices that are not fully compliant with the HID
+ standard. Currently only supports the Xin-Mo Dual Arcade. Say Y here
+ if you have a Xin-Mo Dual Arcade controller.
config HID_ZEROPLUS
tristate "Zeroplus based game controller support"
@@ -1391,7 +1391,7 @@ config ZEROPLUS_FF
config HID_ZYDACRON
tristate "Zydacron remote control support"
help
- Support for Zydacron remote control.
+ Support for Zydacron remote control.
config HID_SENSOR_HUB
tristate "HID Sensors framework support"
@@ -1425,9 +1425,9 @@ config HID_SENSOR_CUSTOM_SENSOR
config HID_ALPS
tristate "Alps HID device support"
help
- Support for Alps I2C HID touchpads and StickPointer.
- Say Y here if you have a Alps touchpads over i2c-hid or usbhid
- and want support for its special functionalities.
+ Support for Alps I2C HID touchpads and StickPointer.
+ Say Y here if you have a Alps touchpads over i2c-hid or usbhid
+ and want support for its special functionalities.
config HID_MCP2200
tristate "Microchip MCP2200 HID USB-to-GPIO bridge"
@@ -1444,11 +1444,11 @@ config HID_MCP2221
imply GPIOLIB
imply IIO
help
- Provides I2C and SMBUS host adapter functionality over USB-HID
- through MCP2221 device.
+ Provides I2C and SMBUS host adapter functionality over USB-HID
+ through MCP2221 device.
- To compile this driver as a module, choose M here: the module
- will be called hid-mcp2221.ko.
+ To compile this driver as a module, choose M here: the module
+ will be called hid-mcp2221.ko.
config HID_KUNIT_TEST
tristate "KUnit tests for HID" if !KUNIT_ALL_TESTS
--
2.54.0
^ permalink raw reply related [flat|nested] 2+ messages in thread* Re: [PATCH] HID: cleanup help indentation in kconfig
2026-06-30 14:20 [PATCH] HID: cleanup help indentation in kconfig Julian Braha
@ 2026-06-30 14:33 ` sashiko-bot
0 siblings, 0 replies; 2+ messages in thread
From: sashiko-bot @ 2026-06-30 14:33 UTC (permalink / raw)
To: Julian Braha; +Cc: dmitry.torokhov, linux-input
Thank you for your contribution! Sashiko AI review found 1 potential issue(s) to consider:
- [Low] Malformed Kconfig help text indentation in `config HID_LENOVO` introduces a syntax error that breaks the kernel configuration process.
--
commit a32d9e3aafce015a8cfc25d49c3d96d9d8d186de
Author: Julian Braha <julianbraha@gmail.com>
HID: cleanup help indentation in kconfig
This commit standardizes the Kconfig help text indentation in the HID
subsystem to 2 spaces.
> diff --git a/drivers/hid/Kconfig b/drivers/hid/Kconfig
> index f9bcaeb66385b..9b04ef19a4d24 100644
> --- a/drivers/hid/Kconfig
> +++ b/drivers/hid/Kconfig
[ ... ]
> @@ -608,12 +608,12 @@ config HID_LENOVO
> tristate "Lenovo / Thinkpad devices"
> depends on LEDS_CLASS
> help
> - Support for IBM/Lenovo devices that are not fully compliant with HID standard.
> + Support for IBM/Lenovo devices that are not fully compliant with HID standard.
>
> - Say Y if you want support for horizontal scrolling of the IBM/Lenovo
> - Scrollpoint mice or the non-compliant features of the Lenovo Thinkpad
> - standalone keyboards, e.g:
> - - ThinkPad USB Keyboard with TrackPoint (supports extra LEDs and trackpoint
> - configuration)
> - - ThinkPad Compact Bluetooth Keyboard with TrackPoint (supports Fn keys)
> - - ThinkPad Compact USB Keyboard with TrackPoint (supports Fn keys)
> + Say Y if you want support for horizontal scrolling of the IBM/Lenovo
> + Scrollpoint mice or the non-compliant features of the Lenovo Thinkpad
> + standalone keyboards, e.g:
> + - ThinkPad USB Keyboard with TrackPoint (supports extra LEDs and trackpoint
> + configuration)
> + - ThinkPad Compact Bluetooth Keyboard with TrackPoint (supports Fn keys)
> + - ThinkPad Compact USB Keyboard with TrackPoint (supports Fn keys)
[Severity: Low]
Does this indentation cause a Kconfig syntax error?
These last two lines in the config HID_LENOVO block appear to be indented
with 6 spaces instead of matching the preceding lines. Because 6 spaces is
less than the indentation of the first line of the help text, the Kconfig
lexer will prematurely terminate the help block here.
Will this cause the parser to treat these lines as top-level Kconfig
statements and result in a syntax error when trying to build or configure
the kernel?
--
Sashiko AI review · https://sashiko.dev/#/patchset/20260630142043.496559-1-julianbraha@gmail.com?part=1
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2026-06-30 14:33 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2026-06-30 14:20 [PATCH] HID: cleanup help indentation in kconfig Julian Braha
2026-06-30 14:33 ` sashiko-bot
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox