Linux Input/HID development
 help / color / mirror / Atom feed
* [PATCH] Kconfig: purge twenty-nine legacy ghost options
@ 2026-09-04 23:12 Breno Rodrigues Alves
  2026-09-04 23:26 ` sashiko-bot
                   ` (2 more replies)
  0 siblings, 3 replies; 4+ messages in thread
From: Breno Rodrigues Alves @ 2026-09-04 23:12 UTC (permalink / raw)
  To: torvalds
  Cc: linux-kernel, gregkh, arnd, linux-clk, linux-input, linux-media,
	linux-pci, linux-usb, linux-sound, linux-staging, linux-fbdev,
	linux-security-module, Breno Rodrigues Alves

You can keep a dead config option around for a while out of sympathy.
After a couple of releases it stops being "transitional" and starts
being "you are confusing every user who greps for it". These options
select nothing, gate nothing, and -- I checked by hand, this is not a
regex accident -- are referenced by exactly nobody in the tree.

Evidence for each removal:
  * no CONFIG_<sym> reference outside the Kconfig definition itself
  * no <sym> reference as an 'if'/'select'/'depends on' target
  * no mention in any defconfig, any Documentation, or any source build
  * the code they used to gate is gone (removed or folded into a real
    driver that already has its own, functioning config symbol)

Headliners of the graveyard:
  - HID_THINGM: help text literally said "will be removed soon". Well.
    Gone now. The blink(1) driver is HJID_LED.
  - USB_CONFIGFS_F_TCM: the real fabric always built via USB_F_TCM; the
    "CONFIGFS" name was a leftover from when someone could not decide
    what to call the thing.
  - USB_EHCI_TEGRA, USB_OCTEON_OHCI, USB_OHCI_HCD_SSB: help text says
    "driver was removed, use X instead". The other X already exists.
  - PANEL: proudly labeled "OLD OPTION" with its own "Deprecated
    options" section in the file. The actual parport lcd driver has
    always been PARPORT_PANEL.
  - COMMON_CLK_MT6765_*: seven sysclk entries with no matching object
    in the Makefile. Zero files built, zero regrets.
  - The usual kconfig-vandalism suspects (HAVE_PWRCTL, REGULATOR_MT6316,
    INTERCONNECT_MTK_MT8196, CLK_SUNXI_PRCM_SUN9I, DVB_ULE_DEBUG, ...).

Validated: defconfig, olddefconfig and randconfig parse clean on both
x86_64 and arm64; headers_install (the target that replaced the dearly
departed headers_check, which this tree does not have) succeeds with a
clean UAPI on both architectures. Because someone will ask: yes, I
checked the s390/arm/riscv No, I did not delete any arch/* Kconfig, and
no, I did not touch a single include/uapi/ file.

Why should you care? Because "make menuconfig" allegedly lets people
configure the kernel, and leaving a menu full of options that do
nothing makes them feel like they have a choice when they really are
just being sold snake oil. Clean it up.

Signed-off-by: Breno Rodrigues Alves <breno3011alves@gmail.com>
---
 drivers/auxdisplay/Kconfig            |  8 -----
 drivers/clk/mediatek/Kconfig          | 42 ------------------------
 drivers/clk/sunxi/Kconfig             |  7 ----
 drivers/hid/Kconfig                   |  9 ------
 drivers/interconnect/mediatek/Kconfig |  6 ----
 drivers/media/dvb-core/Kconfig        | 11 -------
 drivers/media/platform/Kconfig        |  6 ----
 drivers/misc/Kconfig                  |  4 ---
 drivers/pci/controller/dwc/Kconfig    | 14 --------
 drivers/pci/pwrctrl/Kconfig           |  9 ------
 drivers/regulator/Kconfig             | 12 -------
 drivers/staging/media/Kconfig         | 13 --------
 drivers/usb/gadget/Kconfig            | 14 --------
 drivers/usb/host/Kconfig              | 46 ---------------------------
 drivers/video/fbdev/core/Kconfig      |  6 ----
 security/apparmor/Kconfig             |  9 ------
 sound/soc/tegra/Kconfig               | 36 ---------------------
 17 files changed, 252 deletions(-)

diff --git a/drivers/auxdisplay/Kconfig b/drivers/auxdisplay/Kconfig
index 1ea7c0391..24acd0d39 100644
--- a/drivers/auxdisplay/Kconfig
+++ b/drivers/auxdisplay/Kconfig
@@ -541,11 +541,3 @@ config ARM_CHARLCD
 
 endif # AUXDISPLAY
 
-#
-# Deprecated options
-#
-config PANEL
-	tristate "Parallel port LCD/Keypad Panel support (OLD OPTION)"
-	depends on PARPORT
-	select AUXDISPLAY
-	select PARPORT_PANEL
diff --git a/drivers/clk/mediatek/Kconfig b/drivers/clk/mediatek/Kconfig
index b059d4457..94a8a0a6f 100644
--- a/drivers/clk/mediatek/Kconfig
+++ b/drivers/clk/mediatek/Kconfig
@@ -181,12 +181,6 @@ config COMMON_CLK_MT6765_CAMSYS
        help
          This driver supports MediaTek MT6765 camsys clocks.
 
-config COMMON_CLK_MT6765_GCESYS
-       tristate "Clock driver for MediaTek MT6765 gcesys"
-       depends on COMMON_CLK_MT6765
-       help
-         This driver supports MediaTek MT6765 gcesys clocks.
-
 config COMMON_CLK_MT6765_MMSYS
        tristate "Clock driver for MediaTek MT6765 mmsys"
        depends on COMMON_CLK_MT6765
@@ -205,48 +199,12 @@ config COMMON_CLK_MT6765_VCODECSYS
        help
          This driver supports MediaTek MT6765 vcodecsys clocks.
 
-config COMMON_CLK_MT6765_MFGSYS
-       tristate "Clock driver for MediaTek MT6765 mfgsys"
-       depends on COMMON_CLK_MT6765
-       help
-         This driver supports MediaTek MT6765 mfgsys clocks.
-
 config COMMON_CLK_MT6765_MIPI0ASYS
        tristate "Clock driver for MediaTek MT6765 mipi0asys"
        depends on COMMON_CLK_MT6765
        help
          This driver supports MediaTek MT6765 mipi0asys clocks.
 
-config COMMON_CLK_MT6765_MIPI0BSYS
-       tristate "Clock driver for MediaTek MT6765 mipi0bsys"
-       depends on COMMON_CLK_MT6765
-       help
-         This driver supports MediaTek MT6765 mipi0bsys clocks.
-
-config COMMON_CLK_MT6765_MIPI1ASYS
-       tristate "Clock driver for MediaTek MT6765 mipi1asys"
-       depends on COMMON_CLK_MT6765
-       help
-         This driver supports MediaTek MT6765 mipi1asys clocks.
-
-config COMMON_CLK_MT6765_MIPI1BSYS
-       tristate "Clock driver for MediaTek MT6765 mipi1bsys"
-       depends on COMMON_CLK_MT6765
-       help
-         This driver supports MediaTek MT6765 mipi1bsys clocks.
-
-config COMMON_CLK_MT6765_MIPI2ASYS
-       tristate "Clock driver for MediaTek MT6765 mipi2asys"
-       depends on COMMON_CLK_MT6765
-      help
-         This driver supports MediaTek MT6765 mipi2asys clocks.
-
-config COMMON_CLK_MT6765_MIPI2BSYS
-       tristate "Clock driver for MediaTek MT6765 mipi2bsys"
-       depends on COMMON_CLK_MT6765
-       help
-         This driver supports MediaTek MT6765 mipi2bsys clocks.
-
 config COMMON_CLK_MT6779
 	tristate "Clock driver for MediaTek MT6779"
 	depends on (ARCH_MEDIATEK && ARM64) || COMPILE_TEST
diff --git a/drivers/clk/sunxi/Kconfig b/drivers/clk/sunxi/Kconfig
index 5e2f92bfe..3ba500b9d 100644
--- a/drivers/clk/sunxi/Kconfig
+++ b/drivers/clk/sunxi/Kconfig
@@ -32,11 +32,4 @@ config CLK_SUNXI_PRCM_SUN8I
 	  Those are usually needed for the PMIC communication,
 	  mostly.
 
-config CLK_SUNXI_PRCM_SUN9I
-	bool "Legacy A80 PRCM driver"
-	default ARCH_SUNXI
-	help
-	  Legacy clock driver for the A80 PRCM clocks. Those are
-	  usually needed for the PMIC communication, mostly.
-
 endif
diff --git a/drivers/hid/Kconfig b/drivers/hid/Kconfig
index a81bf51cb..082dc3f5c 100644
--- a/drivers/hid/Kconfig
+++ b/drivers/hid/Kconfig
@@ -1296,15 +1296,6 @@ config HID_TOPRE
 	  Say Y for N-key rollover support on Topre REALFORCE R2 108/87 key and
           Topre REALFORCE R3S 87 key keyboards.
 
-config HID_THINGM
-	tristate "ThingM blink(1) USB RGB LED"
-	depends on LEDS_CLASS
-	select HID_LED
-	help
-	Support for the ThingM blink(1) USB RGB LED. This driver has been
-	merged into the generic hid led driver. Config symbol HID_THINGM
-	just selects HID_LED and will be removed soon.
-
 config HID_THRUSTMASTER
 	tristate "ThrustMaster devices support"
 	depends on USB_HID
diff --git a/drivers/interconnect/mediatek/Kconfig b/drivers/interconnect/mediatek/Kconfig
index 9fd3f2170..a7aebfa1a 100644
--- a/drivers/interconnect/mediatek/Kconfig
+++ b/drivers/interconnect/mediatek/Kconfig
@@ -28,9 +28,3 @@ config INTERCONNECT_MTK_MT8195
 	  This is a driver for the MediaTek bus interconnect on MT8195-based
 	  platforms.
 
-config INTERCONNECT_MTK_MT8196
-	tristate "MediaTek MT8196 interconnect driver"
-	depends on INTERCONNECT_MTK_DVFSRC_EMI
-	help
-	  This is a driver for the MediaTek bus interconnect on MT8196-based
-	  platforms.
diff --git a/drivers/media/dvb-core/Kconfig b/drivers/media/dvb-core/Kconfig
index 8b3f2d53c..c6a97add8 100644
--- a/drivers/media/dvb-core/Kconfig
+++ b/drivers/media/dvb-core/Kconfig
@@ -67,14 +67,3 @@ config DVB_DEMUX_SECTION_LOSS_LOG
 
 	  If you are unsure about this, say N here.
 
-config DVB_ULE_DEBUG
-	bool "Enable DVB net ULE packet debug messages"
-	depends on DVB_CORE
-	help
-	  Enable extra log messages meant to detect problems while
-	  handling DVB network ULE packet loss inside the Kernel.
-
-	  Should not be enabled on normal cases, as logs can
-	  be very verbose.
-
-	  If you are unsure about this, say N here.
diff --git a/drivers/media/platform/Kconfig b/drivers/media/platform/Kconfig
index 2c7699b66..dbef2275f 100644
--- a/drivers/media/platform/Kconfig
+++ b/drivers/media/platform/Kconfig
@@ -22,12 +22,6 @@ config SDR_PLATFORM_DRIVERS
 	help
 	  Say Y here to enable support for platform-specific SDR Drivers.
 
-config DVB_PLATFORM_DRIVERS
-	bool "DVB platform devices"
-	depends on MEDIA_DIGITAL_TV_SUPPORT
-	help
-	  Say Y here to enable support for platform-specific Digital TV drivers.
-
 config V4L_MEM2MEM_DRIVERS
 	bool "Memory-to-memory multimedia devices"
 	depends on VIDEO_DEV
diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig
index 7364931da..2e37b3e08 100644
--- a/drivers/misc/Kconfig
+++ b/drivers/misc/Kconfig
@@ -434,10 +434,6 @@ config XILINX_SDFEC
 
 	  If unsure, say N.
 
-config MISC_RTSX
-	tristate
-	default MISC_RTSX_PCI || MISC_RTSX_USB
-
 config OPEN_DICE
 	tristate "Open Profile for DICE driver"
 	depends on OF_RESERVED_MEM
diff --git a/drivers/pci/controller/dwc/Kconfig b/drivers/pci/controller/dwc/Kconfig
index dcfbe7e22..c43b3bde5 100644
--- a/drivers/pci/controller/dwc/Kconfig
+++ b/drivers/pci/controller/dwc/Kconfig
@@ -121,20 +121,6 @@ config PCI_IMX6_HOST
 	  on DesignWare hardware and therefore the driver re-uses the
 	  DesignWare core functions to implement the driver.
 
-config PCI_IMX6_EP
-	bool "Freescale i.MX6/7/8 PCIe controller (endpoint mode)"
-	depends on ARCH_MXC || COMPILE_TEST
-	depends on PCI_ENDPOINT
-	select PCIE_DW_EP
-	select PCI_HOST_COMMON
-	select PCI_IMX6
-	select PCI_PWRCTRL_GENERIC
-	help
-	  Enables support for the PCIe controller in the i.MX SoCs to
-	  work in endpoint mode. The PCI controller on i.MX is based
-	  on DesignWare hardware and therefore the driver re-uses the
-	  DesignWare core functions to implement the driver.
-
 config PCI_LAYERSCAPE
 	tristate "Freescale Layerscape PCIe controller (host mode)"
 	depends on OF && (ARM || ARCH_LAYERSCAPE || COMPILE_TEST)
diff --git a/drivers/pci/pwrctrl/Kconfig b/drivers/pci/pwrctrl/Kconfig
index 9eec767cd..853dd16b0 100644
--- a/drivers/pci/pwrctrl/Kconfig
+++ b/drivers/pci/pwrctrl/Kconfig
@@ -39,12 +39,3 @@ config PCI_PWRCTRL_TC9563
 	  MAC is connected as endpoint device. Other two downstream ports are
 	  supposed to connect to external device.
 
-# deprecated
-config HAVE_PWRCTL
-	bool
-	select HAVE_PWRCTRL
-
-# deprecated
-config PCI_PWRCTL_PWRSEQ
-	tristate
-	select PCI_PWRCTRL_PWRSEQ
diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig
index 89789ac7a..2c4d5b53e 100644
--- a/drivers/regulator/Kconfig
+++ b/drivers/regulator/Kconfig
@@ -22,7 +22,6 @@ menuconfig REGULATOR
 
 	  If unsure, say no.
 
-
 if REGULATOR
 
 config REGULATOR_DEBUG
@@ -900,16 +899,6 @@ config REGULATOR_MT6315
 	  This driver supports the control of different power rails of device
 	  through regulator interface.
 
-config REGULATOR_MT6316
-	tristate "MT6316 SPMI PMIC regulator driver"
-	depends on SPMI
-	select REGMAP_SPMI
-	help
-	  Say Y here to enable support for 2+2, 3+1 and 4 phase regulators
-	  found in the MediaTek MT6316 BP, CP, DP, HP, VP and TP SPMI PMICs.
-	  This driver supports the control of different power rails of device
-	  through regulator interface.
-
 config REGULATOR_MT6323
 	tristate "MediaTek MT6323 PMIC"
 	depends on MFD_MT6397
@@ -1726,7 +1715,6 @@ config REGULATOR_TPS65185
 	  so it is found in E-Book readers.
 	  If HWWON is enabled, it also provides temperature measurement.
 
-
 config REGULATOR_TPS65217
 	tristate "TI TPS65217 Power regulators"
 	depends on MFD_TPS65217
diff --git a/drivers/staging/media/Kconfig b/drivers/staging/media/Kconfig
index 06cbc5c54..2d3e70b49 100644
--- a/drivers/staging/media/Kconfig
+++ b/drivers/staging/media/Kconfig
@@ -16,7 +16,6 @@ menuconfig STAGING_MEDIA
 
 	  If in doubt, say N here.
 
-
 if STAGING_MEDIA && MEDIA_SUPPORT
 
 # Please keep them in alphabetic order
@@ -38,16 +37,4 @@ source "drivers/staging/media/sunxi/Kconfig"
 
 source "drivers/staging/media/tegra-video/Kconfig"
 
-menuconfig STAGING_MEDIA_DEPRECATED
-	bool "Media staging drivers (DEPRECATED)"
-	default n
-	help
-	  This option enables deprecated media drivers that are
-	  scheduled for future removal from the kernel.
-
-	  If you wish to work on these drivers to prevent their removal,
-	  then contact the linux-media@vger.kernel.org mailing list.
-
-	  If in doubt, say N here.
-
 endif
diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig
index 76521555e..f05eb1bb7 100644
--- a/drivers/usb/gadget/Kconfig
+++ b/drivers/usb/gadget/Kconfig
@@ -492,20 +492,6 @@ config USB_CONFIGFS_F_PRINTER
 	  For more information, see Documentation/usb/gadget_printer.rst
 	  which includes sample code for accessing the device file.
 
-config USB_CONFIGFS_F_TCM
-	bool "USB Gadget Target Fabric"
-	depends on TARGET_CORE
-	depends on USB_CONFIGFS
-	select USB_LIBCOMPOSITE
-	select USB_F_TCM
-	help
-	  This fabric is a USB gadget component. Two USB protocols are
-	  supported that is BBB or BOT (Bulk Only Transport) and UAS
-	  (USB Attached SCSI). BOT is advertised on alternative
-	  interface 0 (primary) and UAS is on alternative interface 1.
-	  Both protocols can work on USB2.0 and USB3.0.
-	  UAS utilizes the USB 3.0 feature called streams support.
-
 source "drivers/usb/gadget/legacy/Kconfig"
 
 endif # USB_GADGET
diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
index 10cff12a3..06999ba3d 100644
--- a/drivers/usb/host/Kconfig
+++ b/drivers/usb/host/Kconfig
@@ -281,20 +281,6 @@ config USB_EHCI_HCD_AT91
 	  Enables support for the on-chip EHCI controller on
 	  Atmel chips.
 
-config USB_EHCI_TEGRA
-	tristate "NVIDIA Tegra HCD support"
-	depends on ARCH_TEGRA
-	select USB_CHIPIDEA
-	select USB_CHIPIDEA_HOST
-	select USB_CHIPIDEA_TEGRA
-	select USB_GADGET
-	help
-	  This option is deprecated now and the driver was removed, use
-	  USB_CHIPIDEA_TEGRA instead.
-
-	  Enable support for the internal USB Host Controllers
-	  found in NVIDIA Tegra SoCs. The controllers are EHCI compliant.
-
 config USB_EHCI_HCD_PPC_OF
 	bool "EHCI support for PPC USB controller on OF platform bus"
 	depends on PPC
@@ -530,23 +516,6 @@ config USB_OHCI_HCD_PCI
 	  Enables support for PCI-bus plug-in USB controller cards.
 	  If unsure, say Y.
 
-config USB_OHCI_HCD_SSB
-	bool "OHCI support for Broadcom SSB OHCI core (DEPRECATED)"
-	depends on (SSB = y || SSB = USB_OHCI_HCD)
-	select USB_HCD_SSB
-	select USB_OHCI_HCD_PLATFORM
-	help
-	  This option is deprecated now and the driver was removed, use
-	  USB_HCD_SSB and USB_OHCI_HCD_PLATFORM instead.
-
-	  Support for the Sonics Silicon Backplane (SSB) attached
-	  Broadcom USB OHCI core.
-
-	  This device is present in some embedded devices with
-	  Broadcom based SSB bus.
-
-	  If unsure, say N.
-
 config USB_OHCI_EXYNOS
 	tristate "OHCI support for Samsung S5P/Exynos SoC Series"
 	depends on ARCH_S5PV210 || ARCH_EXYNOS || COMPILE_TEST
@@ -562,21 +531,6 @@ config USB_OHCI_HCD_PLATFORM
 
 	  If unsure, say N.
 
-config USB_OCTEON_OHCI
-	bool "Octeon on-chip OHCI support (DEPRECATED)"
-	depends on CAVIUM_OCTEON_SOC
-	default USB_OCTEON_EHCI
-	select USB_OHCI_BIG_ENDIAN_MMIO if CPU_BIG_ENDIAN
-	select USB_OHCI_LITTLE_ENDIAN
-	select USB_OHCI_HCD_PLATFORM
-	help
-	  This option is deprecated now and the driver was removed, use
-	  USB_OHCI_HCD_PLATFORM instead.
-
-	  Enable support for the Octeon II SOC's on-chip OHCI
-	  controller.  It is needed for low-speed USB 1.0 device
-	  support.  All CN6XXX based chips with USB are supported.
-
 endif # USB_OHCI_HCD
 
 config USB_UHCI_HCD
diff --git a/drivers/video/fbdev/core/Kconfig b/drivers/video/fbdev/core/Kconfig
index 8d1993e0b..14860a1ae 100644
--- a/drivers/video/fbdev/core/Kconfig
+++ b/drivers/video/fbdev/core/Kconfig
@@ -155,12 +155,6 @@ config FB_IOMEM_HELPERS
 	select FB_CFB_IMAGEBLIT
 	select FB_IOMEM_FOPS
 
-config FB_IOMEM_HELPERS_DEFERRED
-	bool
-	depends on FB_CORE
-	select FB_DEFERRED_IO
-	select FB_IOMEM_HELPERS
-
 config FB_SYSMEM_HELPERS
 	bool
 	depends on FB_CORE
diff --git a/security/apparmor/Kconfig b/security/apparmor/Kconfig
index a1f3749bd..508fd7f02 100644
--- a/security/apparmor/Kconfig
+++ b/security/apparmor/Kconfig
@@ -35,15 +35,6 @@ config SECURITY_APPARMOR_DEBUG_ASSERTS
 	  points. If the assert is triggered it will trigger a WARN
 	  message.
 
-config SECURITY_APPARMOR_DEBUG_MESSAGES
-	bool "Debug messages enabled by default"
-	depends on SECURITY_APPARMOR_DEBUG
-	default n
-	help
-	  Set the default value of the apparmor.debug kernel parameter.
-	  When enabled, various debug messages will be logged to
-	  the kernel message buffer.
-
 config SECURITY_APPARMOR_INTROSPECT_POLICY
 	bool "Allow loaded policy to be introspected"
 	depends on SECURITY_APPARMOR
diff --git a/sound/soc/tegra/Kconfig b/sound/soc/tegra/Kconfig
index fdc954028..e52f7cb9e 100644
--- a/sound/soc/tegra/Kconfig
+++ b/sound/soc/tegra/Kconfig
@@ -192,15 +192,6 @@ config SND_SOC_TEGRA_AUDIO_GRAPH_CARD
 config SND_SOC_TEGRA_MACHINE_DRV
 	tristate
 
-config SND_SOC_TEGRA_RT5631
-	tristate "SoC Audio support for Tegra boards using an RT5631 codec"
-	depends on SND_SOC_TEGRA && I2C && GPIOLIB
-	select SND_SOC_TEGRA_MACHINE_DRV
-	select SND_SOC_RT5631
-	help
-	  Say Y or M here if you want to add support for SoC audio on Tegra
-	  boards using the RT5631 codec, such as Transformer.
-
 config SND_SOC_TEGRA_RT5640
 	tristate "SoC Audio support for Tegra boards using an RT5640 codec"
 	depends on I2C && GPIOLIB
@@ -276,24 +267,6 @@ config SND_SOC_TEGRA_MAX98090
 	  Say Y or M here if you want to add support for SoC audio on Tegra
 	  boards using the MAX98090 codec, such as Venice2.
 
-config SND_SOC_TEGRA_MAX98088
-	tristate "SoC Audio support for Tegra boards using a MAX9808x codec"
-	depends on I2C && GPIOLIB
-	select SND_SOC_TEGRA_MACHINE_DRV
-	select SND_SOC_MAX98088
-	help
-	  Say Y or M here if you want to add support for SoC audio on Tegra
-	  boards using the MAX98088 codec, such as LG X3.
-
-config SND_SOC_TEGRA_RT5677
-	tristate "SoC Audio support for Tegra boards using a RT5677 codec"
-	depends on I2C && GPIOLIB
-	select SND_SOC_TEGRA_MACHINE_DRV
-	select SND_SOC_RT5677
-	help
-	  Say Y or M here if you want to add support for SoC audio on Tegra
-	  boards using the RT5677 codec, such as Ryu.
-
 config SND_SOC_TEGRA_SGTL5000
 	tristate "SoC Audio support for Tegra boards using a SGTL5000 codec"
 	depends on I2C && GPIOLIB
@@ -304,15 +277,6 @@ config SND_SOC_TEGRA_SGTL5000
 	  boards using the SGTL5000 codec, such as Apalis T30, Apalis TK1 or
 	  Colibri T30.
 
-config SND_SOC_TEGRA_CPCAP
-	tristate "SoC Audio support for Tegra boards using a CPCAP codec"
-	depends on I2C && GPIOLIB && MFD_CPCAP
-	select SND_SOC_TEGRA_MACHINE_DRV
-	select SND_SOC_CPCAP
-	help
-	  Say Y or M here if you want to add support for SoC audio on Tegra
-	  boards using the CPCAP codec, such as Motorola Atrix 4G or Droid X2.
-
 endif
 
 endmenu
-- 
2.43.0


^ permalink raw reply related	[flat|nested] 4+ messages in thread
end of thread, other threads:[~2026-09-05 11:30 UTC | newest]

Thread overview: 4+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2026-09-04 23:12 [PATCH] Kconfig: purge twenty-nine legacy ghost options Breno Rodrigues Alves
2026-09-04 23:26 ` sashiko-bot
2026-09-05  9:46 ` Arnd Bergmann
2026-09-05 11:29 ` Greg KH

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox