From: Yuugo Yoneda via B4 Relay <devnull+yogo.0917.sabu.gmail.com@kernel.org>
To: linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org
Cc: Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Thomas Gleixner <tglx@kernel.org>, Radu Rendec <radu@rendec.net>,
Daniel Lezcano <daniel.lezcano@kernel.org>,
Dmitry Torokhov <dmitry.torokhov@gmail.com>,
Ulf Hansson <ulfh@kernel.org>,
Adrian Hunter <adrian.hunter@intel.com>,
Jonathan Corbet <corbet@lwn.net>,
Shuah Khan <skhan@linuxfoundation.org>,
Randy Dunlap <rdunlap@infradead.org>,
Russell King <linux@armlinux.org.uk>,
Arnd Bergmann <arnd@arndb.de>,
Alexandre Belloni <alexandre.belloni@bootlin.com>,
Linus Walleij <linusw@kernel.org>,
Drew Fustini <fustini@kernel.org>,
linux-kernel@vger.kernel.org, linux-input@vger.kernel.org,
linux-mmc@vger.kernel.org, linux-doc@vger.kernel.org,
soc@lists.linux.dev
Subject: [PATCH RFC v2 06/13] clocksource/drivers/timer-at550: add SiRF AT550 counter and match timer
Date: Sat, 21 Nov 2026 21:43:16 +0900 [thread overview]
Message-ID: <20261121-at550-rfc-v1-v2-6-b0309d0789b2@gmail.com> (raw)
In-Reply-To: <20261121-at550-rfc-v1-v2-0-b0309d0789b2@gmail.com>
From: Yuugo Yoneda <yogo.0917.sabu@gmail.com>
Add a clocksource, sched_clock, and one-shot clockevent driver for the
SiRF AT550 system timer using the low 32-bit counter and match channel
0.
Enable the timer clock before reading the watchdog and divider
registers, preserve the firmware-configured divider, refuse to
initialize if a watchdog is running, write MATCH0 before clearing
status, implement set_state_oneshot_stopped, and unwind resources on
error.
Signed-off-by: Yuugo Yoneda <yogo.0917.sabu@gmail.com>
---
MAINTAINERS | 1 +
drivers/clocksource/Kconfig | 6 ++
drivers/clocksource/Makefile | 2 +
drivers/clocksource/timer-at550.c | 136 ++++++++++++++++++++++++++++++++++++++
4 files changed, 145 insertions(+)
diff --git a/MAINTAINERS b/MAINTAINERS
index 3c5a814f2..d6ea4d946 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -25853,6 +25853,7 @@ S: Odd Fixes
F: Documentation/devicetree/bindings/arm/sirf,at550.yaml
F: Documentation/devicetree/bindings/interrupt-controller/sirf,at550-intc.yaml
F: Documentation/devicetree/bindings/timer/sirf,at550-timer.yaml
+F: drivers/clocksource/timer-at550.c
F: drivers/irqchip/irq-at550.c
SIS 190 ETHERNET DRIVER
diff --git a/drivers/clocksource/Kconfig b/drivers/clocksource/Kconfig
index da8348329..ed73947bd 100644
--- a/drivers/clocksource/Kconfig
+++ b/drivers/clocksource/Kconfig
@@ -835,4 +835,10 @@ choice
endchoice
+config CLKSRC_AT550
+ bool
+ depends on ARM
+ select TIMER_OF
+ select CLKSRC_MMIO
+
endmenu
diff --git a/drivers/clocksource/Makefile b/drivers/clocksource/Makefile
index 464ec6690..0f3d4fb1c 100644
--- a/drivers/clocksource/Makefile
+++ b/drivers/clocksource/Makefile
@@ -97,3 +97,5 @@ obj-$(CONFIG_RALINK_TIMER) += timer-ralink.o
obj-$(CONFIG_NXP_STM_TIMER) += timer-nxp-stm.o
obj-$(CONFIG_RTK_SYSTIMER) += timer-realtek.o
obj-$(CONFIG_RZN1_TIMER) += timer-rzn1.o
+
+obj-$(CONFIG_CLKSRC_AT550) += timer-at550.o
diff --git a/drivers/clocksource/timer-at550.c b/drivers/clocksource/timer-at550.c
new file mode 100644
index 000000000..a56446478
--- /dev/null
+++ b/drivers/clocksource/timer-at550.c
@@ -0,0 +1,136 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/* SiRF AT550 free-running counter and match channel 0. */
+#include <linux/clk.h>
+#include <linux/clockchips.h>
+#include <linux/clocksource.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/sched_clock.h>
+
+#define AT550_MATCH0 0x08
+#define AT550_STATUS 0x20
+#define AT550_ENABLE 0x24
+#define AT550_WATCHDOG 0x28
+#define AT550_DIVIDER 0x2c
+
+static void __iomem *at550_timer;
+static struct clock_event_device at550_event;
+
+static u64 notrace at550_sched_read(void)
+{
+ return readl_relaxed(at550_timer);
+}
+
+static int at550_shutdown(struct clock_event_device *event)
+{
+ writel(0, at550_timer + AT550_ENABLE);
+ return 0;
+}
+
+static int at550_next_event(unsigned long delta,
+ struct clock_event_device *event)
+{
+ u32 target;
+
+ writel(0, at550_timer + AT550_ENABLE);
+ target = readl(at550_timer) + delta;
+ writel(target, at550_timer + AT550_MATCH0);
+ writel(1, at550_timer + AT550_STATUS);
+ writel(1, at550_timer + AT550_ENABLE);
+ if ((s32)(target - readl(at550_timer)) <= 0) {
+ writel(0, at550_timer + AT550_ENABLE);
+ return -ETIME;
+ }
+ return 0;
+}
+
+static irqreturn_t at550_timer_interrupt(int irq, void *data)
+{
+ struct clock_event_device *event = data;
+
+ if (!(readl(at550_timer + AT550_STATUS) & 1))
+ return IRQ_NONE;
+ writel(0, at550_timer + AT550_ENABLE);
+ writel(1, at550_timer + AT550_STATUS);
+ event->event_handler(event);
+ return IRQ_HANDLED;
+}
+
+static int __init at550_timer_init(struct device_node *node)
+{
+ struct clk *clk;
+ unsigned long rate;
+ unsigned int irq;
+ int ret;
+
+ if (at550_timer)
+ return -EINVAL;
+ at550_timer = of_iomap(node, 0);
+ if (!at550_timer)
+ return -ENOMEM;
+ clk = of_clk_get(node, 0);
+ if (IS_ERR(clk)) {
+ ret = PTR_ERR(clk);
+ goto unmap;
+ }
+ ret = clk_prepare_enable(clk);
+ if (ret)
+ goto put_clock;
+ rate = clk_get_rate(clk);
+ if (!rate) {
+ ret = -EINVAL;
+ goto disable_clock;
+ }
+ /* Do not disturb a running firmware watchdog or unknown divider bits. */
+ if (readl(at550_timer + AT550_WATCHDOG) ||
+ readl(at550_timer + AT550_DIVIDER) > 0xffff) {
+ ret = -EBUSY;
+ goto disable_clock;
+ }
+ irq = irq_of_parse_and_map(node, 0);
+ if (!irq) {
+ ret = -EINVAL;
+ goto disable_clock;
+ }
+ writel(0, at550_timer + AT550_ENABLE);
+ writel(0x3f, at550_timer + AT550_STATUS);
+ at550_event.name = "at550-match0";
+ at550_event.features = CLOCK_EVT_FEAT_ONESHOT;
+ at550_event.rating = 200;
+ at550_event.set_next_event = at550_next_event;
+ at550_event.set_state_shutdown = at550_shutdown;
+ at550_event.set_state_oneshot = at550_shutdown;
+ at550_event.set_state_oneshot_stopped = at550_shutdown;
+ at550_event.tick_resume = at550_shutdown;
+ at550_event.cpumask = cpumask_of(0);
+ at550_event.irq = irq;
+ ret = request_irq(irq, at550_timer_interrupt, IRQF_TIMER,
+ "at550-match0", &at550_event);
+ if (ret)
+ goto dispose_irq;
+ ret = clocksource_mmio_init(at550_timer, "at550-counter", rate, 200,
+ 32, clocksource_mmio_readl_up);
+ if (ret)
+ goto free_irq;
+ /* Firmware has configured the divider; the supplied clock is its output. */
+ sched_clock_register(at550_sched_read, 32, rate);
+ clockevents_config_and_register(&at550_event, rate,
+ max(32UL, rate / 10000), 0x7fffffff);
+ return 0;
+
+free_irq:
+ free_irq(irq, &at550_event);
+dispose_irq:
+ irq_dispose_mapping(irq);
+disable_clock:
+ clk_disable_unprepare(clk);
+put_clock:
+ clk_put(clk);
+unmap:
+ iounmap(at550_timer);
+ at550_timer = NULL;
+ return ret;
+}
+TIMER_OF_DECLARE(at550, "sirf,at550-timer", at550_timer_init);
--
2.56.0
next prev parent reply other threads:[~2026-11-21 12:43 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-11-21 12:43 [PATCH RFC v2 00/13] SiRF AT550 / YPL514si initial RAM-boot platform support Yuugo Yoneda via B4 Relay
2026-11-21 12:43 ` [PATCH RFC v2 01/13] dt-bindings: vendor-prefixes: add Yupiteru Yuugo Yoneda via B4 Relay
2026-11-21 12:43 ` [PATCH RFC v2 02/13] dt-bindings: arm: add SiRF AT550 and Yupiteru YPL514si Yuugo Yoneda via B4 Relay
2026-11-21 12:43 ` [PATCH RFC v2 03/13] dt-bindings: interrupt-controller: add SiRF AT550 interrupt controller Yuugo Yoneda via B4 Relay
2026-11-21 12:43 ` [PATCH RFC v2 04/13] irqchip: add SiRF AT550 interrupt controller driver Yuugo Yoneda via B4 Relay
2026-11-21 12:43 ` [PATCH RFC v2 05/13] dt-bindings: timer: add SiRF AT550 system timer Yuugo Yoneda via B4 Relay
2026-11-21 12:48 ` sashiko-bot
2026-11-21 12:43 ` Yuugo Yoneda via B4 Relay [this message]
2026-11-21 12:43 ` [PATCH RFC v2 07/13] dt-bindings: input: touchscreen: add SiRF AT550 touchscreen Yuugo Yoneda via B4 Relay
2026-11-21 12:48 ` sashiko-bot
2026-11-21 12:43 ` [PATCH RFC v2 08/13] Input: add polled SiRF AT550 resistive touchscreen driver Yuugo Yoneda via B4 Relay
2026-11-21 12:43 ` [PATCH RFC v2 09/13] dt-bindings: mmc: add SiRF AT550 SDHCI host controller Yuugo Yoneda via B4 Relay
2026-11-21 12:48 ` sashiko-bot
2026-11-21 12:43 ` [PATCH RFC v2 10/13] mmc: sdhci-at550: add SiRF AT550 programmed-I/O host driver Yuugo Yoneda via B4 Relay
2026-11-21 12:43 ` [PATCH RFC v2 11/13] ARM: at550: add SiRF AT550 platform support Yuugo Yoneda via B4 Relay
2026-11-21 12:43 ` [PATCH RFC v2 12/13] ARM: dts: sirf: add SiRF AT550 SoC and Yupiteru YPL514si board Yuugo Yoneda via B4 Relay
2026-11-21 12:43 ` [PATCH RFC v2 13/13] ARM: configs: add at550_defconfig Yuugo Yoneda via B4 Relay
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20261121-at550-rfc-v1-v2-6-b0309d0789b2@gmail.com \
--to=devnull+yogo.0917.sabu.gmail.com@kernel.org \
--cc=adrian.hunter@intel.com \
--cc=alexandre.belloni@bootlin.com \
--cc=arnd@arndb.de \
--cc=conor+dt@kernel.org \
--cc=corbet@lwn.net \
--cc=daniel.lezcano@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=dmitry.torokhov@gmail.com \
--cc=fustini@kernel.org \
--cc=krzk+dt@kernel.org \
--cc=linusw@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-doc@vger.kernel.org \
--cc=linux-input@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mmc@vger.kernel.org \
--cc=linux@armlinux.org.uk \
--cc=radu@rendec.net \
--cc=rdunlap@infradead.org \
--cc=robh@kernel.org \
--cc=skhan@linuxfoundation.org \
--cc=soc@lists.linux.dev \
--cc=tglx@kernel.org \
--cc=ulfh@kernel.org \
--cc=yogo.0917.sabu@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox