[PATCH 16/19] iommu/vt-d: Add custom allocator for IOASID

[Lu Baolu <baolu.lu@linux.intel.com>]

From: Jacob Pan <jacob.jun.pan@linux.intel.com>

When VT-d driver runs in the guest, PASID allocation must be
performed via virtual command interface. This patch registers a
custom IOASID allocator which takes precedence over the default
XArray based allocator. The resulting IOASID allocation will always
come from the host. This ensures that PASID namespace is system-
wide.

Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Liu, Yi L <yi.l.liu@intel.com>
Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
---
 drivers/iommu/intel-iommu.c | 84 +++++++++++++++++++++++++++++++++++++
 include/linux/intel-iommu.h |  2 +
 2 files changed, 86 insertions(+)

diff --git a/drivers/iommu/intel-iommu.c b/drivers/iommu/intel-iommu.c
index 2310f8466594..087cf8a701f6 100644
--- a/drivers/iommu/intel-iommu.c
+++ b/drivers/iommu/intel-iommu.c
@@ -1727,6 +1727,9 @@ static void free_dmar_iommu(struct intel_iommu *iommu)
 		if (ecap_prs(iommu->ecap))
 			intel_svm_finish_prq(iommu);
 	}
+	if (ecap_vcs(iommu->ecap) && vccap_pasid(iommu->vccap))
+		ioasid_unregister_allocator(&iommu->pasid_allocator);
+
 #endif
 }
 
@@ -3039,6 +3042,84 @@ static int copy_translation_tables(struct intel_iommu *iommu)
 	return ret;
 }
 
+#ifdef CONFIG_INTEL_IOMMU_SVM
+static ioasid_t intel_vcmd_ioasid_alloc(ioasid_t min, ioasid_t max, void *data)
+{
+	struct intel_iommu *iommu = data;
+	ioasid_t ioasid;
+
+	if (!iommu)
+		return INVALID_IOASID;
+	/*
+	 * VT-d virtual command interface always uses the full 20 bit
+	 * PASID range. Host can partition guest PASID range based on
+	 * policies but it is out of guest's control.
+	 */
+	if (min < PASID_MIN || max > intel_pasid_max_id)
+		return INVALID_IOASID;
+
+	if (vcmd_alloc_pasid(iommu, &ioasid))
+		return INVALID_IOASID;
+
+	return ioasid;
+}
+
+static void intel_vcmd_ioasid_free(ioasid_t ioasid, void *data)
+{
+	struct intel_iommu *iommu = data;
+
+	if (!iommu)
+		return;
+	/*
+	 * Sanity check the ioasid owner is done at upper layer, e.g. VFIO
+	 * We can only free the PASID when all the devices are unbound.
+	 */
+	if (ioasid_find(NULL, ioasid, NULL)) {
+		pr_alert("Cannot free active IOASID %d\n", ioasid);
+		return;
+	}
+	vcmd_free_pasid(iommu, ioasid);
+}
+
+static void register_pasid_allocator(struct intel_iommu *iommu)
+{
+	/*
+	 * If we are running in the host, no need for custom allocator
+	 * in that PASIDs are allocated from the host system-wide.
+	 */
+	if (!cap_caching_mode(iommu->cap))
+		return;
+
+	if (!sm_supported(iommu)) {
+		pr_warn("VT-d Scalable Mode not enabled, no PASID allocation\n");
+		return;
+	}
+
+	/*
+	 * Register a custom PASID allocator if we are running in a guest,
+	 * guest PASID must be obtained via virtual command interface.
+	 * There can be multiple vIOMMUs in each guest but only one allocator
+	 * is active. All vIOMMU allocators will eventually be calling the same
+	 * host allocator.
+	 */
+	if (ecap_vcs(iommu->ecap) && vccap_pasid(iommu->vccap)) {
+		pr_info("Register custom PASID allocator\n");
+		iommu->pasid_allocator.alloc = intel_vcmd_ioasid_alloc;
+		iommu->pasid_allocator.free = intel_vcmd_ioasid_free;
+		iommu->pasid_allocator.pdata = (void *)iommu;
+		if (ioasid_register_allocator(&iommu->pasid_allocator)) {
+			pr_warn("Custom PASID allocator failed, scalable mode disabled\n");
+			/*
+			 * Disable scalable mode on this IOMMU if there
+			 * is no custom allocator. Mixing SM capable vIOMMU
+			 * and non-SM vIOMMU are not supported.
+			 */
+			intel_iommu_sm = 0;
+		}
+	}
+}
+#endif
+
 static int __init init_dmars(void)
 {
 	struct dmar_drhd_unit *drhd;
@@ -3156,6 +3237,9 @@ static int __init init_dmars(void)
 	 */
 	for_each_active_iommu(iommu, drhd) {
 		iommu_flush_write_buffer(iommu);
+#ifdef CONFIG_INTEL_IOMMU_SVM
+		register_pasid_allocator(iommu);
+#endif
 		iommu_set_root_entry(iommu);
 		iommu->flush.flush_context(iommu, 0, 0, 0, DMA_CCMD_GLOBAL_INVL);
 		iommu->flush.flush_iotlb(iommu, 0, 0, 0, DMA_TLB_GLOBAL_FLUSH);
diff --git a/include/linux/intel-iommu.h b/include/linux/intel-iommu.h
index fcee324173a8..4038fa3d837a 100644
--- a/include/linux/intel-iommu.h
+++ b/include/linux/intel-iommu.h
@@ -19,6 +19,7 @@
 #include <linux/iommu.h>
 #include <linux/io-64-nonatomic-lo-hi.h>
 #include <linux/dmar.h>
+#include <linux/ioasid.h>
 
 #include <asm/cacheflush.h>
 #include <asm/iommu.h>
@@ -580,6 +581,7 @@ struct intel_iommu {
 #ifdef CONFIG_INTEL_IOMMU_SVM
 	struct page_req_dsc *prq;
 	unsigned char prq_name[16];    /* Name for PRQ interrupt */
+	struct ioasid_allocator_ops pasid_allocator; /* Custom allocator for PASIDs */
 #endif
 	struct q_inval  *qi;            /* Queued invalidation info */
 	u32 *iommu_state; /* Store iommu states between suspend and resume.*/
-- 
2.17.1

_______________________________________________
iommu mailing list
iommu@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/iommu