From: Yi Liu <yi.l.liu@intel.com>
To: kevin.tian@intel.com, jgg@nvidia.com
Cc: joro@8bytes.org, baolu.lu@linux.intel.com, yi.l.liu@intel.com,
iommu@lists.linux.dev, nicolinc@nvidia.com
Subject: [PATCH v10 11/18] iommufd: Support pasid attach/replace
Date: Thu, 20 Mar 2025 06:47:37 -0700 [thread overview]
Message-ID: <20250320134744.5777-12-yi.l.liu@intel.com> (raw)
In-Reply-To: <20250320134744.5777-1-yi.l.liu@intel.com>
This extends the below APIs to support PASID. Device drivers to manage pasid
attach/replace/detach.
int iommufd_device_attach(struct iommufd_device *idev,
ioasid_t pasid, u32 *pt_id);
int iommufd_device_replace(struct iommufd_device *idev,
ioasid_t pasid, u32 *pt_id);
void iommufd_device_detach(struct iommufd_device *idev,
ioasid_t pasid);
The pasid operations share underlying attach/replace/detach infrastructure
with the device operations, but still have some different implications:
- no reserved region per pasid otherwise SVA architecture is already
broken (CPU address space doesn't count device reserved regions);
- accordingly no sw_msi trick;
Cache coherency enforcement is still applied to pasid operations since
it is about memory accesses post page table walking (no matter the walk
is per RID or per PASID).
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
---
v9 -> v10: minor tweaks per rebase
---
drivers/iommu/iommufd/device.c | 57 ++++++++++++++++++++------------
drivers/iommu/iommufd/selftest.c | 8 ++---
drivers/vfio/iommufd.c | 10 +++---
include/linux/iommufd.h | 9 +++--
4 files changed, 52 insertions(+), 32 deletions(-)
diff --git a/drivers/iommu/iommufd/device.c b/drivers/iommu/iommufd/device.c
index 6d003f9f0668..17c424d9a355 100644
--- a/drivers/iommu/iommufd/device.c
+++ b/drivers/iommu/iommufd/device.c
@@ -543,9 +543,12 @@ static int iommufd_hwpt_attach_device(struct iommufd_hw_pagetable *hwpt,
}
handle->idev = idev;
- WARN_ON(pasid != IOMMU_NO_PASID);
- rc = iommu_attach_group_handle(hwpt->domain, idev->igroup->group,
- &handle->handle);
+ if (pasid == IOMMU_NO_PASID)
+ rc = iommu_attach_group_handle(hwpt->domain, idev->igroup->group,
+ &handle->handle);
+ else
+ rc = iommu_attach_device_pasid(hwpt->domain, idev->dev, pasid,
+ &handle->handle);
if (rc)
goto out_disable_iopf;
@@ -579,10 +582,12 @@ static void iommufd_hwpt_detach_device(struct iommufd_hw_pagetable *hwpt,
{
struct iommufd_attach_handle *handle;
- WARN_ON(pasid != IOMMU_NO_PASID);
+ if (pasid == IOMMU_NO_PASID)
+ iommu_detach_group_handle(hwpt->domain, idev->igroup->group);
+ else
+ iommu_detach_device_pasid(hwpt->domain, idev->dev, pasid);
handle = iommufd_device_get_attach_handle(idev, pasid);
- iommu_detach_group_handle(hwpt->domain, idev->igroup->group);
if (hwpt->fault) {
iommufd_auto_response_faults(hwpt, handle);
iommufd_fault_iopf_disable(idev);
@@ -598,8 +603,6 @@ static int iommufd_hwpt_replace_device(struct iommufd_device *idev,
struct iommufd_attach_handle *handle, *old_handle;
int rc;
- WARN_ON(pasid != IOMMU_NO_PASID);
-
rc = iommufd_hwpt_pasid_compat(hwpt, idev, pasid);
if (rc)
return rc;
@@ -617,8 +620,12 @@ static int iommufd_hwpt_replace_device(struct iommufd_device *idev,
}
handle->idev = idev;
- rc = iommu_replace_group_handle(idev->igroup->group, hwpt->domain,
- &handle->handle);
+ if (pasid == IOMMU_NO_PASID)
+ rc = iommu_replace_group_handle(idev->igroup->group,
+ hwpt->domain, &handle->handle);
+ else
+ rc = iommu_replace_device_pasid(hwpt->domain, idev->dev,
+ pasid, &handle->handle);
if (rc)
goto out_disable_iopf;
@@ -1026,22 +1033,25 @@ static int iommufd_device_change_pt(struct iommufd_device *idev,
}
/**
- * iommufd_device_attach - Connect a device to an iommu_domain
+ * iommufd_device_attach - Connect a device/pasid to an iommu_domain
* @idev: device to attach
+ * @pasid: pasid to attach
* @pt_id: Input a IOMMUFD_OBJ_IOAS, or IOMMUFD_OBJ_HWPT_PAGING
* Output the IOMMUFD_OBJ_HWPT_PAGING ID
*
- * This connects the device to an iommu_domain, either automatically or manually
- * selected. Once this completes the device could do DMA.
+ * This connects the device/pasid to an iommu_domain, either automatically
+ * or manually selected. Once this completes the device could do DMA with
+ * @pasid. @pasid is IOMMU_NO_PASID if this attach is for no pasid usage.
*
* The caller should return the resulting pt_id back to userspace.
* This function is undone by calling iommufd_device_detach().
*/
-int iommufd_device_attach(struct iommufd_device *idev, u32 *pt_id)
+int iommufd_device_attach(struct iommufd_device *idev, ioasid_t pasid,
+ u32 *pt_id)
{
int rc;
- rc = iommufd_device_change_pt(idev, IOMMU_NO_PASID, pt_id,
+ rc = iommufd_device_change_pt(idev, pasid, pt_id,
&iommufd_device_do_attach);
if (rc)
return rc;
@@ -1056,8 +1066,9 @@ int iommufd_device_attach(struct iommufd_device *idev, u32 *pt_id)
EXPORT_SYMBOL_NS_GPL(iommufd_device_attach, "IOMMUFD");
/**
- * iommufd_device_replace - Change the device's iommu_domain
+ * iommufd_device_replace - Change the device/pasid's iommu_domain
* @idev: device to change
+ * @pasid: pasid to change
* @pt_id: Input a IOMMUFD_OBJ_IOAS, or IOMMUFD_OBJ_HWPT_PAGING
* Output the IOMMUFD_OBJ_HWPT_PAGING ID
*
@@ -1068,27 +1079,31 @@ EXPORT_SYMBOL_NS_GPL(iommufd_device_attach, "IOMMUFD");
*
* If it fails then no change is made to the attachment. The iommu driver may
* implement this so there is no disruption in translation. This can only be
- * called if iommufd_device_attach() has already succeeded.
+ * called if iommufd_device_attach() has already succeeded. @pasid is
+ * IOMMU_NO_PASID for no pasid usage.
*/
-int iommufd_device_replace(struct iommufd_device *idev, u32 *pt_id)
+int iommufd_device_replace(struct iommufd_device *idev, ioasid_t pasid,
+ u32 *pt_id)
{
- return iommufd_device_change_pt(idev, IOMMU_NO_PASID, pt_id,
+ return iommufd_device_change_pt(idev, pasid, pt_id,
&iommufd_device_do_replace);
}
EXPORT_SYMBOL_NS_GPL(iommufd_device_replace, "IOMMUFD");
/**
- * iommufd_device_detach - Disconnect a device to an iommu_domain
+ * iommufd_device_detach - Disconnect a device/device to an iommu_domain
* @idev: device to detach
+ * @pasid: pasid to detach
*
* Undo iommufd_device_attach(). This disconnects the idev from the previously
* attached pt_id. The device returns back to a blocked DMA translation.
+ * @pasid is IOMMU_NO_PASID for no pasid usage.
*/
-void iommufd_device_detach(struct iommufd_device *idev)
+void iommufd_device_detach(struct iommufd_device *idev, ioasid_t pasid)
{
struct iommufd_hw_pagetable *hwpt;
- hwpt = iommufd_hw_pagetable_detach(idev, IOMMU_NO_PASID);
+ hwpt = iommufd_hw_pagetable_detach(idev, pasid);
iommufd_hw_pagetable_put(idev->ictx, hwpt);
refcount_dec(&idev->obj.users);
}
diff --git a/drivers/iommu/iommufd/selftest.c b/drivers/iommu/iommufd/selftest.c
index d55dde28e9bc..0b3f5cbf242b 100644
--- a/drivers/iommu/iommufd/selftest.c
+++ b/drivers/iommu/iommufd/selftest.c
@@ -945,7 +945,7 @@ static int iommufd_test_mock_domain(struct iommufd_ucmd *ucmd,
}
sobj->idev.idev = idev;
- rc = iommufd_device_attach(idev, &pt_id);
+ rc = iommufd_device_attach(idev, IOMMU_NO_PASID, &pt_id);
if (rc)
goto out_unbind;
@@ -960,7 +960,7 @@ static int iommufd_test_mock_domain(struct iommufd_ucmd *ucmd,
return 0;
out_detach:
- iommufd_device_detach(idev);
+ iommufd_device_detach(idev, IOMMU_NO_PASID);
out_unbind:
iommufd_device_unbind(idev);
out_mdev:
@@ -994,7 +994,7 @@ static int iommufd_test_mock_domain_replace(struct iommufd_ucmd *ucmd,
goto out_dev_obj;
}
- rc = iommufd_device_replace(sobj->idev.idev, &pt_id);
+ rc = iommufd_device_replace(sobj->idev.idev, IOMMU_NO_PASID, &pt_id);
if (rc)
goto out_dev_obj;
@@ -1655,7 +1655,7 @@ void iommufd_selftest_destroy(struct iommufd_object *obj)
switch (sobj->type) {
case TYPE_IDEV:
- iommufd_device_detach(sobj->idev.idev);
+ iommufd_device_detach(sobj->idev.idev, IOMMU_NO_PASID);
iommufd_device_unbind(sobj->idev.idev);
mock_dev_destroy(sobj->idev.mock_dev);
break;
diff --git a/drivers/vfio/iommufd.c b/drivers/vfio/iommufd.c
index 516294fd901b..37e1efa2c7bf 100644
--- a/drivers/vfio/iommufd.c
+++ b/drivers/vfio/iommufd.c
@@ -128,7 +128,7 @@ void vfio_iommufd_physical_unbind(struct vfio_device *vdev)
lockdep_assert_held(&vdev->dev_set->lock);
if (vdev->iommufd_attached) {
- iommufd_device_detach(vdev->iommufd_device);
+ iommufd_device_detach(vdev->iommufd_device, IOMMU_NO_PASID);
vdev->iommufd_attached = false;
}
iommufd_device_unbind(vdev->iommufd_device);
@@ -146,9 +146,11 @@ int vfio_iommufd_physical_attach_ioas(struct vfio_device *vdev, u32 *pt_id)
return -EINVAL;
if (vdev->iommufd_attached)
- rc = iommufd_device_replace(vdev->iommufd_device, pt_id);
+ rc = iommufd_device_replace(vdev->iommufd_device,
+ IOMMU_NO_PASID, pt_id);
else
- rc = iommufd_device_attach(vdev->iommufd_device, pt_id);
+ rc = iommufd_device_attach(vdev->iommufd_device,
+ IOMMU_NO_PASID, pt_id);
if (rc)
return rc;
vdev->iommufd_attached = true;
@@ -163,7 +165,7 @@ void vfio_iommufd_physical_detach_ioas(struct vfio_device *vdev)
if (WARN_ON(!vdev->iommufd_device) || !vdev->iommufd_attached)
return;
- iommufd_device_detach(vdev->iommufd_device);
+ iommufd_device_detach(vdev->iommufd_device, IOMMU_NO_PASID);
vdev->iommufd_attached = false;
}
EXPORT_SYMBOL_GPL(vfio_iommufd_physical_detach_ioas);
diff --git a/include/linux/iommufd.h b/include/linux/iommufd.h
index 60eff9272551..34b6e6ca4bfa 100644
--- a/include/linux/iommufd.h
+++ b/include/linux/iommufd.h
@@ -8,6 +8,7 @@
#include <linux/err.h>
#include <linux/errno.h>
+#include <linux/iommu.h>
#include <linux/refcount.h>
#include <linux/types.h>
#include <linux/xarray.h>
@@ -54,9 +55,11 @@ struct iommufd_device *iommufd_device_bind(struct iommufd_ctx *ictx,
struct device *dev, u32 *id);
void iommufd_device_unbind(struct iommufd_device *idev);
-int iommufd_device_attach(struct iommufd_device *idev, u32 *pt_id);
-int iommufd_device_replace(struct iommufd_device *idev, u32 *pt_id);
-void iommufd_device_detach(struct iommufd_device *idev);
+int iommufd_device_attach(struct iommufd_device *idev, ioasid_t pasid,
+ u32 *pt_id);
+int iommufd_device_replace(struct iommufd_device *idev, ioasid_t pasid,
+ u32 *pt_id);
+void iommufd_device_detach(struct iommufd_device *idev, ioasid_t pasid);
struct iommufd_ctx *iommufd_device_to_ictx(struct iommufd_device *idev);
u32 iommufd_device_to_id(struct iommufd_device *idev);
--
2.34.1
next prev parent reply other threads:[~2025-03-20 13:47 UTC|newest]
Thread overview: 78+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-03-20 13:47 [PATCH v10 00/18] iommufd support pasid attach/replace Yi Liu
2025-03-20 13:47 ` [PATCH v10 01/18] iommu: Require passing new handles to APIs supporting handle Yi Liu
2025-03-20 15:23 ` Jason Gunthorpe
2025-03-20 23:51 ` Yi Liu
2025-03-21 2:35 ` Baolu Lu
2025-03-20 13:47 ` [PATCH v10 02/18] iommu: Introduce a replace API for device pasid Yi Liu
2025-03-20 17:24 ` Nicolin Chen
2025-03-20 23:58 ` Yi Liu
2025-03-21 0:14 ` Yi Liu
2025-03-21 3:21 ` Nicolin Chen
2025-03-21 4:06 ` Yi Liu
2025-03-21 3:08 ` Baolu Lu
2025-03-21 4:19 ` Yi Liu
2025-03-20 13:47 ` [PATCH v10 03/18] iommufd: Pass @pasid through the device attach/replace path Yi Liu
2025-03-21 3:13 ` Baolu Lu
2025-03-20 13:47 ` [PATCH v10 04/18] iommufd/device: Only add reserved_iova in non-pasid path Yi Liu
2025-03-21 3:14 ` Baolu Lu
2025-03-20 13:47 ` [PATCH v10 05/18] iommufd/device: Replace idev->igroup with local variable Yi Liu
2025-03-21 3:14 ` Baolu Lu
2025-03-20 13:47 ` [PATCH v10 06/18] iommufd/device: Add helper to detect the first attach of a group Yi Liu
2025-03-20 15:36 ` Jason Gunthorpe
2025-03-20 17:36 ` Nicolin Chen
2025-03-20 17:51 ` Nicolin Chen
2025-03-21 0:02 ` Yi Liu
2025-03-20 18:04 ` Jason Gunthorpe
2025-03-20 18:24 ` Nicolin Chen
2025-03-21 3:18 ` Baolu Lu
2025-03-20 13:47 ` [PATCH v10 07/18] iommufd/device: Wrap igroup->hwpt and igroup->device_list into attach struct Yi Liu
2025-03-20 15:48 ` Jason Gunthorpe
2025-03-20 18:03 ` Nicolin Chen
2025-03-21 3:22 ` Baolu Lu
2025-03-20 13:47 ` [PATCH v10 08/18] iommufd/device: Replace device_list with device_array Yi Liu
2025-03-20 17:20 ` Jason Gunthorpe
2025-03-21 0:25 ` Yi Liu
2025-03-20 18:38 ` Nicolin Chen
2025-03-21 0:30 ` Yi Liu
2025-03-21 3:25 ` Nicolin Chen
2025-03-20 13:47 ` [PATCH v10 09/18] iommufd/device: Add pasid_attach array to track per-PASID attach Yi Liu
2025-03-20 17:33 ` Jason Gunthorpe
2025-03-20 19:19 ` Nicolin Chen
2025-03-20 19:29 ` Jason Gunthorpe
2025-03-20 20:13 ` Nicolin Chen
2025-03-21 0:15 ` Yi Liu
2025-03-20 13:47 ` [PATCH v10 10/18] iommufd: Enforce PASID-compatible domain in PASID path Yi Liu
2025-03-20 13:47 ` Yi Liu [this message]
2025-03-20 20:42 ` [PATCH v10 11/18] iommufd: Support pasid attach/replace Nicolin Chen
2025-03-20 23:29 ` Jason Gunthorpe
2025-03-21 0:31 ` Yi Liu
2025-03-21 0:35 ` Nicolin Chen
2025-03-21 1:05 ` Yi Liu
2025-03-21 11:45 ` Jason Gunthorpe
2025-03-20 13:47 ` [PATCH v10 12/18] iommufd: Enforce PASID-compatible domain for RID Yi Liu
2025-03-20 17:35 ` Jason Gunthorpe
2025-03-20 22:23 ` Nicolin Chen
2025-03-20 23:31 ` Jason Gunthorpe
2025-03-21 0:45 ` Yi Liu
2025-03-21 0:41 ` Yi Liu
2025-03-20 13:47 ` [PATCH v10 13/18] iommu/vt-d: Add IOMMU_HWPT_ALLOC_PASID support Yi Liu
2025-03-20 13:47 ` [PATCH v10 14/18] iommufd: Allow allocating PASID-compatible domain Yi Liu
2025-03-20 17:51 ` Jason Gunthorpe
2025-03-21 0:52 ` Yi Liu
2025-03-20 22:36 ` Nicolin Chen
2025-03-20 13:47 ` [PATCH v10 15/18] iommufd/selftest: Add set_dev_pasid in mock iommu Yi Liu
2025-03-20 22:48 ` Nicolin Chen
2025-03-20 13:47 ` [PATCH v10 16/18] iommufd/selftest: Add a helper to get test device Yi Liu
2025-03-20 13:47 ` [PATCH v10 17/18] iommufd/selftest: Add test ops to test pasid attach/detach Yi Liu
2025-03-20 23:17 ` Nicolin Chen
2025-03-20 23:33 ` Jason Gunthorpe
2025-03-20 23:42 ` Nicolin Chen
2025-03-21 1:43 ` Yi Liu
2025-03-21 17:25 ` Nicolin Chen
2025-03-20 23:20 ` Nicolin Chen
2025-03-21 1:20 ` Yi Liu
2025-03-20 13:47 ` [PATCH v10 18/18] iommufd/selftest: Add coverage for iommufd " Yi Liu
2025-03-21 0:34 ` Nicolin Chen
2025-03-21 15:26 ` Yi Liu
2025-03-21 17:10 ` Nicolin Chen
2025-03-20 13:59 ` [PATCH v10 00/18] iommufd support pasid attach/replace Yi Liu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250320134744.5777-12-yi.l.liu@intel.com \
--to=yi.l.liu@intel.com \
--cc=baolu.lu@linux.intel.com \
--cc=iommu@lists.linux.dev \
--cc=jgg@nvidia.com \
--cc=joro@8bytes.org \
--cc=kevin.tian@intel.com \
--cc=nicolinc@nvidia.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox