From: "Ilpo Järvinen" <ilpo.jarvinen@linux.intel.com>
To: linux-kselftest@vger.kernel.org,
"Reinette Chatre" <reinette.chatre@intel.com>,
"Shuah Khan" <shuah@kernel.org>,
"Shaopeng Tan" <tan.shaopeng@jp.fujitsu.com>,
"Maciej Wieczór-Retman" <maciej.wieczor-retman@intel.com>,
"Fenghua Yu" <fenghua.yu@intel.com>
Cc: linux-kernel@vger.kernel.org,
"Ilpo Järvinen" <ilpo.jarvinen@linux.intel.com>
Subject: [PATCH v2 10/26] selftests/resctrl: Remove unnecessary __u64 -> unsigned long conversion
Date: Mon, 20 Nov 2023 13:13:24 +0200 [thread overview]
Message-ID: <20231120111340.7805-11-ilpo.jarvinen@linux.intel.com> (raw)
In-Reply-To: <20231120111340.7805-1-ilpo.jarvinen@linux.intel.com>
Perf counters are __u64 but the code converts them to unsigned long
before printing them out.
Remove unnecessary type conversion and retain the value as __u64 whole
the time.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
---
tools/testing/selftests/resctrl/cache.c | 21 ++++++++-------------
tools/testing/selftests/resctrl/cat_test.c | 8 ++++----
tools/testing/selftests/resctrl/resctrl.h | 3 +--
3 files changed, 13 insertions(+), 19 deletions(-)
diff --git a/tools/testing/selftests/resctrl/cache.c b/tools/testing/selftests/resctrl/cache.c
index 493e0e924123..6a754ea376c9 100644
--- a/tools/testing/selftests/resctrl/cache.c
+++ b/tools/testing/selftests/resctrl/cache.c
@@ -83,9 +83,8 @@ static int reset_enable_llc_perf(pid_t pid, int cpu_no)
*
* Return: =0 on success. <0 on failure.
*/
-static int get_llc_perf(unsigned long *llc_perf_miss)
+static int get_llc_perf(__u64 *llc_perf_miss)
{
- __u64 total_misses;
int ret;
/* Stop counters after one span to get miss rate */
@@ -98,8 +97,7 @@ static int get_llc_perf(unsigned long *llc_perf_miss)
return -1;
}
- total_misses = rf_cqm.values[0].value;
- *llc_perf_miss = total_misses;
+ *llc_perf_miss = rf_cqm.values[0].value;
return 0;
}
@@ -147,14 +145,12 @@ static int get_llc_occu_resctrl(unsigned long *llc_occupancy)
*
* Return: 0 on success. non-zero on failure.
*/
-static int print_results_cache(const char *filename, int bm_pid,
- unsigned long llc_value)
+static int print_results_cache(const char *filename, int bm_pid, __u64 llc_value)
{
FILE *fp;
if (strcmp(filename, "stdio") == 0 || strcmp(filename, "stderr") == 0) {
- printf("Pid: %d \t LLC_value: %lu\n", bm_pid,
- llc_value);
+ printf("Pid: %d \t LLC_value: %llu\n", bm_pid, llc_value);
} else {
fp = fopen(filename, "a");
if (!fp) {
@@ -162,7 +158,7 @@ static int print_results_cache(const char *filename, int bm_pid,
return errno;
}
- fprintf(fp, "Pid: %d \t llc_value: %lu\n", bm_pid, llc_value);
+ fprintf(fp, "Pid: %d \t llc_value: %llu\n", bm_pid, llc_value);
fclose(fp);
}
@@ -182,7 +178,7 @@ static int print_results_cache(const char *filename, int bm_pid,
*/
static int perf_event_measure(const char *filename, int bm_pid)
{
- unsigned long llc_perf_miss = 0;
+ __u64 llc_perf_miss = 0;
int ret;
ret = get_llc_perf(&llc_perf_miss);
@@ -287,11 +283,10 @@ int cat_val(struct resctrl_val_param *param, size_t span)
* @cache_span: Cache span
* @lines: @cache_span in lines or bytes
*/
-void show_cache_info(int no_of_bits, unsigned long avg_llc_val,
- size_t cache_span, bool lines)
+void show_cache_info(int no_of_bits, __u64 avg_llc_val, size_t cache_span, bool lines)
{
ksft_print_msg("Number of bits: %d\n", no_of_bits);
- ksft_print_msg("Average LLC val: %lu\n", avg_llc_val);
+ ksft_print_msg("Average LLC val: %llu\n", avg_llc_val);
ksft_print_msg("Cache span (%s): %zu\n", lines ? "lines" : "bytes",
cache_span);
}
diff --git a/tools/testing/selftests/resctrl/cat_test.c b/tools/testing/selftests/resctrl/cat_test.c
index 2842dff292f0..ca2dd46ec733 100644
--- a/tools/testing/selftests/resctrl/cat_test.c
+++ b/tools/testing/selftests/resctrl/cat_test.c
@@ -41,12 +41,12 @@ static int cat_setup(struct resctrl_val_param *p)
return ret;
}
-static int show_results_info(unsigned long sum_llc_val, int no_of_bits,
+static int show_results_info(__u64 sum_llc_val, int no_of_bits,
unsigned long cache_span, unsigned long max_diff,
unsigned long max_diff_percent, unsigned long num_of_runs,
bool platform)
{
- unsigned long avg_llc_val = 0;
+ __u64 avg_llc_val = 0;
float diff_percent;
int ret;
@@ -68,8 +68,8 @@ static int show_results_info(unsigned long sum_llc_val, int no_of_bits,
static int check_results(struct resctrl_val_param *param, size_t span)
{
char *token_array[8], temp[512];
- unsigned long sum_llc_perf_miss = 0;
int runs = 0, no_of_bits = 0;
+ __u64 sum_llc_perf_miss = 0;
FILE *fp;
ksft_print_msg("Checking for pass/fail\n");
@@ -93,7 +93,7 @@ static int check_results(struct resctrl_val_param *param, size_t span)
* setup transition phase.
*/
if (runs > 0)
- sum_llc_perf_miss += strtoul(token_array[3], NULL, 0);
+ sum_llc_perf_miss += strtoull(token_array[3], NULL, 0);
runs++;
}
diff --git a/tools/testing/selftests/resctrl/resctrl.h b/tools/testing/selftests/resctrl/resctrl.h
index 4a05efccab35..e5a7b02a6a54 100644
--- a/tools/testing/selftests/resctrl/resctrl.h
+++ b/tools/testing/selftests/resctrl/resctrl.h
@@ -115,8 +115,7 @@ unsigned int count_bits(unsigned long n);
void cmt_test_cleanup(void);
int get_core_sibling(int cpu_no);
int measure_llc_resctrl(const char *filename, int bm_pid);
-void show_cache_info(int no_of_bits, unsigned long avg_llc_val,
- size_t cache_span, bool lines);
+void show_cache_info(int no_of_bits, __u64 avg_llc_val, size_t cache_span, bool lines);
/*
* cache_portion_size - Calculate the size of a cache portion
--
2.30.2
next prev parent reply other threads:[~2023-11-20 11:15 UTC|newest]
Thread overview: 62+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-11-20 11:13 [PATCH v2 00/26] selftests/resctrl: CAT test improvements & generalized test framework Ilpo Järvinen
2023-11-20 11:13 ` [PATCH v2 01/26] selftests/resctrl: Don't use ctrlc_handler() outside signal handling Ilpo Järvinen
2023-11-28 22:09 ` Reinette Chatre
2023-11-20 11:13 ` [PATCH v2 02/26] selftests/resctrl: Split fill_buf to allow tests finer-grained control Ilpo Järvinen
2023-11-28 22:10 ` Reinette Chatre
2023-12-07 14:04 ` Ilpo Järvinen
2023-11-20 11:13 ` [PATCH v2 03/26] selftests/resctrl: Refactor fill_buf functions Ilpo Järvinen
2023-11-28 22:10 ` Reinette Chatre
2023-11-20 11:13 ` [PATCH v2 04/26] selftests/resctrl: Refactor get_cbm_mask() and rename to get_full_cbm() Ilpo Järvinen
2023-11-28 22:11 ` Reinette Chatre
2023-11-20 11:13 ` [PATCH v2 05/26] selftests/resctrl: Mark get_cache_size() cache_type const Ilpo Järvinen
2023-11-28 22:11 ` Reinette Chatre
2023-11-20 11:13 ` [PATCH v2 06/26] selftests/resctrl: Create cache_portion_size() helper Ilpo Järvinen
2023-11-28 22:11 ` Reinette Chatre
2023-11-20 11:13 ` [PATCH v2 07/26] selftests/resctrl: Exclude shareable bits from schemata in CAT test Ilpo Järvinen
2023-11-28 22:12 ` Reinette Chatre
2023-11-20 11:13 ` [PATCH v2 08/26] selftests/resctrl: Split measure_cache_vals() Ilpo Järvinen
2023-11-28 22:13 ` Reinette Chatre
2023-12-07 14:32 ` Ilpo Järvinen
2023-12-07 18:02 ` Reinette Chatre
2023-12-07 18:33 ` Ilpo Järvinen
2023-12-07 18:35 ` Reinette Chatre
2023-11-20 11:13 ` [PATCH v2 09/26] selftests/resctrl: Split show_cache_info() to test specific and generic parts Ilpo Järvinen
2023-11-28 22:13 ` Reinette Chatre
2023-11-20 11:13 ` Ilpo Järvinen [this message]
2023-11-28 22:14 ` [PATCH v2 10/26] selftests/resctrl: Remove unnecessary __u64 -> unsigned long conversion Reinette Chatre
2023-11-20 11:13 ` [PATCH v2 11/26] selftests/resctrl: Remove nested calls in perf event handling Ilpo Järvinen
2023-11-28 22:15 ` Reinette Chatre
2023-11-20 11:13 ` [PATCH v2 12/26] selftests/resctrl: Consolidate naming of perf event related things Ilpo Järvinen
2023-11-28 22:15 ` Reinette Chatre
2023-11-20 11:13 ` [PATCH v2 13/26] selftests/resctrl: Improve perf init Ilpo Järvinen
2023-11-28 22:15 ` Reinette Chatre
2023-11-20 11:13 ` [PATCH v2 14/26] selftests/resctrl: Convert perf related globals to locals Ilpo Järvinen
2023-11-28 22:15 ` Reinette Chatre
2023-11-20 11:13 ` [PATCH v2 15/26] selftests/resctrl: Move cat_val() to cat_test.c and rename to cat_test() Ilpo Järvinen
2023-11-28 22:15 ` Reinette Chatre
2023-11-20 11:13 ` [PATCH v2 16/26] selftests/resctrl: Open perf fd before start & add error handling Ilpo Järvinen
2023-11-28 22:16 ` Reinette Chatre
2023-11-20 11:13 ` [PATCH v2 17/26] selftests/resctrl: Replace file write with volatile variable Ilpo Järvinen
2023-11-28 22:16 ` Reinette Chatre
2023-12-07 15:03 ` Ilpo Järvinen
2023-11-20 11:13 ` [PATCH v2 18/26] selftests/resctrl: Read in less obvious order to defeat prefetch optimizations Ilpo Järvinen
2023-11-28 22:17 ` Reinette Chatre
2023-11-20 11:13 ` [PATCH v2 19/26] selftests/resctrl: Rewrite Cache Allocation Technology (CAT) test Ilpo Järvinen
2023-11-28 22:17 ` Reinette Chatre
2023-12-07 15:18 ` Ilpo Järvinen
2023-11-20 11:13 ` [PATCH v2 20/26] selftests/resctrl: Create struct for input parameters Ilpo Järvinen
2023-11-28 22:18 ` Reinette Chatre
2023-11-20 11:13 ` [PATCH v2 21/26] selftests/resctrl: Introduce generalized test framework Ilpo Järvinen
2023-11-28 22:19 ` Reinette Chatre
2023-11-20 11:13 ` [PATCH v2 22/26] selftests/resctrl: Pass write_schemata() resource instead of test name Ilpo Järvinen
2023-11-28 22:19 ` Reinette Chatre
2023-11-20 11:13 ` [PATCH v2 23/26] selftests/resctrl: Add helper to convert L2/3 to integer Ilpo Järvinen
2023-11-28 22:22 ` Reinette Chatre
2023-11-20 11:13 ` [PATCH v2 24/26] selftests/resctrl: Rename resource ID to domain ID Ilpo Järvinen
2023-11-28 22:22 ` Reinette Chatre
2023-11-20 11:13 ` [PATCH v2 25/26] selftests/resctrl: Get domain id from cache id Ilpo Järvinen
2023-11-28 22:22 ` Reinette Chatre
2023-11-20 11:13 ` [PATCH v2 26/26] selftests/resctrl: Add test groups and name L3 CAT test L3_CAT Ilpo Järvinen
2023-11-28 22:22 ` Reinette Chatre
2023-11-29 11:11 ` Ilpo Järvinen
2023-11-30 7:36 ` Maciej Wieczór-Retman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20231120111340.7805-11-ilpo.jarvinen@linux.intel.com \
--to=ilpo.jarvinen@linux.intel.com \
--cc=fenghua.yu@intel.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-kselftest@vger.kernel.org \
--cc=maciej.wieczor-retman@intel.com \
--cc=reinette.chatre@intel.com \
--cc=shuah@kernel.org \
--cc=tan.shaopeng@jp.fujitsu.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox