From: "Ilpo Järvinen" <ilpo.jarvinen@linux.intel.com>
To: linux-kselftest@vger.kernel.org,
"Reinette Chatre" <reinette.chatre@intel.com>,
"Shuah Khan" <shuah@kernel.org>,
"Shaopeng Tan" <tan.shaopeng@jp.fujitsu.com>,
"Maciej Wieczór-Retman" <maciej.wieczor-retman@intel.com>,
"Fenghua Yu" <fenghua.yu@intel.com>
Cc: linux-kernel@vger.kernel.org,
"Ilpo Järvinen" <ilpo.jarvinen@linux.intel.com>
Subject: [PATCH v2 08/26] selftests/resctrl: Split measure_cache_vals()
Date: Mon, 20 Nov 2023 13:13:22 +0200 [thread overview]
Message-ID: <20231120111340.7805-9-ilpo.jarvinen@linux.intel.com> (raw)
In-Reply-To: <20231120111340.7805-1-ilpo.jarvinen@linux.intel.com>
measure_cache_vals() does a different thing depending on the test case
that called it:
- For CAT, it measures LLC misses through perf.
- For CMT, it measures LLC occupancy through resctrl.
Split these two functionalities into own functions the CAT and CMT
tests can call directly. Replace passing the struct resctrl_val_param
parameter with the filename because it's more generic and all those
functions need out of resctrl_val.
Co-developed-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
---
tools/testing/selftests/resctrl/cache.c | 66 ++++++++++++-------
tools/testing/selftests/resctrl/resctrl.h | 2 +-
tools/testing/selftests/resctrl/resctrl_val.c | 2 +-
3 files changed, 43 insertions(+), 27 deletions(-)
diff --git a/tools/testing/selftests/resctrl/cache.c b/tools/testing/selftests/resctrl/cache.c
index 8aa6d67db978..129d1c293518 100644
--- a/tools/testing/selftests/resctrl/cache.c
+++ b/tools/testing/selftests/resctrl/cache.c
@@ -147,7 +147,7 @@ static int get_llc_occu_resctrl(unsigned long *llc_occupancy)
*
* Return: 0 on success. non-zero on failure.
*/
-static int print_results_cache(char *filename, int bm_pid,
+static int print_results_cache(const char *filename, int bm_pid,
unsigned long llc_value)
{
FILE *fp;
@@ -169,35 +169,51 @@ static int print_results_cache(char *filename, int bm_pid,
return 0;
}
-int measure_cache_vals(struct resctrl_val_param *param, int bm_pid)
+/*
+ * perf_event_measure - Measure perf events
+ * @filename: Filename for writing the results
+ * @bm_pid: PID that runs the benchmark
+ *
+ * Measures perf events (e.g., cache misses) and writes the results into
+ * @filename. @bm_pid is written to the results file along with the measured
+ * value.
+ *
+ * Return: =0 on success. <0 on failure.
+ */
+static int perf_event_measure(const char *filename, int bm_pid)
{
- unsigned long llc_perf_miss = 0, llc_occu_resc = 0, llc_value = 0;
+ unsigned long llc_perf_miss = 0;
int ret;
- /*
- * Measure cache miss from perf.
- */
- if (!strncmp(param->resctrl_val, CAT_STR, sizeof(CAT_STR))) {
- ret = get_llc_perf(&llc_perf_miss);
- if (ret < 0)
- return ret;
- llc_value = llc_perf_miss;
- }
+ ret = get_llc_perf(&llc_perf_miss);
+ if (ret < 0)
+ return ret;
- /*
- * Measure llc occupancy from resctrl.
- */
- if (!strncmp(param->resctrl_val, CMT_STR, sizeof(CMT_STR))) {
- ret = get_llc_occu_resctrl(&llc_occu_resc);
- if (ret < 0)
- return ret;
- llc_value = llc_occu_resc;
- }
- ret = print_results_cache(param->filename, bm_pid, llc_value);
- if (ret)
+ ret = print_results_cache(filename, bm_pid, llc_perf_miss);
+ return ret;
+}
+
+/*
+ * measure_llc_resctrl - Measure resctrl llc value from resctrl
+ * @filename: Filename for writing the results
+ * @bm_pid: PID that runs the benchmark
+ *
+ * Measures llc occupancy from resctrl and writes the results into @filename.
+ * @bm_pid is written to the results file along with the measured value.
+ *
+ * Return: =0 on success. <0 on failure.
+ */
+int measure_llc_resctrl(const char *filename, int bm_pid)
+{
+ unsigned long llc_occu_resc = 0;
+ int ret;
+
+ ret = get_llc_occu_resctrl(&llc_occu_resc);
+ if (ret < 0)
return ret;
- return 0;
+ ret = print_results_cache(filename, bm_pid, llc_occu_resc);
+ return ret;
}
/*
@@ -252,7 +268,7 @@ int cat_val(struct resctrl_val_param *param, size_t span)
}
sleep(1);
- ret = measure_cache_vals(param, bm_pid);
+ ret = perf_event_measure(param->filename, bm_pid);
if (ret)
goto pe_close;
}
diff --git a/tools/testing/selftests/resctrl/resctrl.h b/tools/testing/selftests/resctrl/resctrl.h
index a911b08fa595..d35e3ba4dfa2 100644
--- a/tools/testing/selftests/resctrl/resctrl.h
+++ b/tools/testing/selftests/resctrl/resctrl.h
@@ -114,7 +114,7 @@ int cmt_resctrl_val(int cpu_no, int n, const char * const *benchmark_cmd);
unsigned int count_bits(unsigned long n);
void cmt_test_cleanup(void);
int get_core_sibling(int cpu_no);
-int measure_cache_vals(struct resctrl_val_param *param, int bm_pid);
+int measure_llc_resctrl(const char *filename, int bm_pid);
int show_cache_info(unsigned long sum_llc_val, int no_of_bits,
size_t cache_span, unsigned long max_diff,
unsigned long max_diff_percent, unsigned long num_of_runs,
diff --git a/tools/testing/selftests/resctrl/resctrl_val.c b/tools/testing/selftests/resctrl/resctrl_val.c
index 88789678917b..a07ba336db48 100644
--- a/tools/testing/selftests/resctrl/resctrl_val.c
+++ b/tools/testing/selftests/resctrl/resctrl_val.c
@@ -830,7 +830,7 @@ int resctrl_val(const char * const *benchmark_cmd, struct resctrl_val_param *par
break;
} else if (!strncmp(resctrl_val, CMT_STR, sizeof(CMT_STR))) {
sleep(1);
- ret = measure_cache_vals(param, bm_pid);
+ ret = measure_llc_resctrl(param->filename, bm_pid);
if (ret)
break;
}
--
2.30.2
next prev parent reply other threads:[~2023-11-20 11:14 UTC|newest]
Thread overview: 62+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-11-20 11:13 [PATCH v2 00/26] selftests/resctrl: CAT test improvements & generalized test framework Ilpo Järvinen
2023-11-20 11:13 ` [PATCH v2 01/26] selftests/resctrl: Don't use ctrlc_handler() outside signal handling Ilpo Järvinen
2023-11-28 22:09 ` Reinette Chatre
2023-11-20 11:13 ` [PATCH v2 02/26] selftests/resctrl: Split fill_buf to allow tests finer-grained control Ilpo Järvinen
2023-11-28 22:10 ` Reinette Chatre
2023-12-07 14:04 ` Ilpo Järvinen
2023-11-20 11:13 ` [PATCH v2 03/26] selftests/resctrl: Refactor fill_buf functions Ilpo Järvinen
2023-11-28 22:10 ` Reinette Chatre
2023-11-20 11:13 ` [PATCH v2 04/26] selftests/resctrl: Refactor get_cbm_mask() and rename to get_full_cbm() Ilpo Järvinen
2023-11-28 22:11 ` Reinette Chatre
2023-11-20 11:13 ` [PATCH v2 05/26] selftests/resctrl: Mark get_cache_size() cache_type const Ilpo Järvinen
2023-11-28 22:11 ` Reinette Chatre
2023-11-20 11:13 ` [PATCH v2 06/26] selftests/resctrl: Create cache_portion_size() helper Ilpo Järvinen
2023-11-28 22:11 ` Reinette Chatre
2023-11-20 11:13 ` [PATCH v2 07/26] selftests/resctrl: Exclude shareable bits from schemata in CAT test Ilpo Järvinen
2023-11-28 22:12 ` Reinette Chatre
2023-11-20 11:13 ` Ilpo Järvinen [this message]
2023-11-28 22:13 ` [PATCH v2 08/26] selftests/resctrl: Split measure_cache_vals() Reinette Chatre
2023-12-07 14:32 ` Ilpo Järvinen
2023-12-07 18:02 ` Reinette Chatre
2023-12-07 18:33 ` Ilpo Järvinen
2023-12-07 18:35 ` Reinette Chatre
2023-11-20 11:13 ` [PATCH v2 09/26] selftests/resctrl: Split show_cache_info() to test specific and generic parts Ilpo Järvinen
2023-11-28 22:13 ` Reinette Chatre
2023-11-20 11:13 ` [PATCH v2 10/26] selftests/resctrl: Remove unnecessary __u64 -> unsigned long conversion Ilpo Järvinen
2023-11-28 22:14 ` Reinette Chatre
2023-11-20 11:13 ` [PATCH v2 11/26] selftests/resctrl: Remove nested calls in perf event handling Ilpo Järvinen
2023-11-28 22:15 ` Reinette Chatre
2023-11-20 11:13 ` [PATCH v2 12/26] selftests/resctrl: Consolidate naming of perf event related things Ilpo Järvinen
2023-11-28 22:15 ` Reinette Chatre
2023-11-20 11:13 ` [PATCH v2 13/26] selftests/resctrl: Improve perf init Ilpo Järvinen
2023-11-28 22:15 ` Reinette Chatre
2023-11-20 11:13 ` [PATCH v2 14/26] selftests/resctrl: Convert perf related globals to locals Ilpo Järvinen
2023-11-28 22:15 ` Reinette Chatre
2023-11-20 11:13 ` [PATCH v2 15/26] selftests/resctrl: Move cat_val() to cat_test.c and rename to cat_test() Ilpo Järvinen
2023-11-28 22:15 ` Reinette Chatre
2023-11-20 11:13 ` [PATCH v2 16/26] selftests/resctrl: Open perf fd before start & add error handling Ilpo Järvinen
2023-11-28 22:16 ` Reinette Chatre
2023-11-20 11:13 ` [PATCH v2 17/26] selftests/resctrl: Replace file write with volatile variable Ilpo Järvinen
2023-11-28 22:16 ` Reinette Chatre
2023-12-07 15:03 ` Ilpo Järvinen
2023-11-20 11:13 ` [PATCH v2 18/26] selftests/resctrl: Read in less obvious order to defeat prefetch optimizations Ilpo Järvinen
2023-11-28 22:17 ` Reinette Chatre
2023-11-20 11:13 ` [PATCH v2 19/26] selftests/resctrl: Rewrite Cache Allocation Technology (CAT) test Ilpo Järvinen
2023-11-28 22:17 ` Reinette Chatre
2023-12-07 15:18 ` Ilpo Järvinen
2023-11-20 11:13 ` [PATCH v2 20/26] selftests/resctrl: Create struct for input parameters Ilpo Järvinen
2023-11-28 22:18 ` Reinette Chatre
2023-11-20 11:13 ` [PATCH v2 21/26] selftests/resctrl: Introduce generalized test framework Ilpo Järvinen
2023-11-28 22:19 ` Reinette Chatre
2023-11-20 11:13 ` [PATCH v2 22/26] selftests/resctrl: Pass write_schemata() resource instead of test name Ilpo Järvinen
2023-11-28 22:19 ` Reinette Chatre
2023-11-20 11:13 ` [PATCH v2 23/26] selftests/resctrl: Add helper to convert L2/3 to integer Ilpo Järvinen
2023-11-28 22:22 ` Reinette Chatre
2023-11-20 11:13 ` [PATCH v2 24/26] selftests/resctrl: Rename resource ID to domain ID Ilpo Järvinen
2023-11-28 22:22 ` Reinette Chatre
2023-11-20 11:13 ` [PATCH v2 25/26] selftests/resctrl: Get domain id from cache id Ilpo Järvinen
2023-11-28 22:22 ` Reinette Chatre
2023-11-20 11:13 ` [PATCH v2 26/26] selftests/resctrl: Add test groups and name L3 CAT test L3_CAT Ilpo Järvinen
2023-11-28 22:22 ` Reinette Chatre
2023-11-29 11:11 ` Ilpo Järvinen
2023-11-30 7:36 ` Maciej Wieczór-Retman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20231120111340.7805-9-ilpo.jarvinen@linux.intel.com \
--to=ilpo.jarvinen@linux.intel.com \
--cc=fenghua.yu@intel.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-kselftest@vger.kernel.org \
--cc=maciej.wieczor-retman@intel.com \
--cc=reinette.chatre@intel.com \
--cc=shuah@kernel.org \
--cc=tan.shaopeng@jp.fujitsu.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox