Re: [PATCH v8 3/9] dt: bindings: Add multicolor class dt bindings documention

[Jacek Anaszewski <jacek.anaszewski@gmail.com>]

Dan,

On 9/20/19 7:41 PM, Dan Murphy wrote:
> Add DT bindings for the LEDs multicolor class framework.
> 
> Signed-off-by: Dan Murphy <dmurphy@ti.com>
> ---
>  .../bindings/leds/leds-class-multicolor.txt   | 95 +++++++++++++++++++
>  1 file changed, 95 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/leds/leds-class-multicolor.txt
> 
> diff --git a/Documentation/devicetree/bindings/leds/leds-class-multicolor.txt b/Documentation/devicetree/bindings/leds/leds-class-multicolor.txt
> new file mode 100644
> index 000000000000..215d3c90f351
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/leds/leds-class-multicolor.txt
> @@ -0,0 +1,95 @@
> +* Multicolor LED properties
> +
> +Monochrome LEDs can grouped into LED clusters.  These clusters can provide a
> +visible output that have a wide range of colors and intensities.

Here is the same issue as I spotted in a review for the patch 2/9
from this set:

"
I'd say it won't be the most frequent use case. We can expect rather
compound RGB, RGBA[UV] etc. LED elements being connected to iouts of
multi color LED controllers like LP50xx.
"

How about:

Bindings for multi color LEDs show how to describe current outputs of
either integrated multi-color LED elements (like RGB, RGBW, RGBWA-UV
etc.) or standalone LEDs, to achieve logically grouped multi-color LED
modules. This is achieved by adding multi-led nodes layer to the
monochrome LED bindings.

> +
> +The nodes and properties defined in this document are unique to the multicolor
> +LED class.  Common LED nodes and properties are inherited from the common.txt
> +within this documentation directory.
> +
> +Required LED Child properties:
> +	- color : For multicolor LED support this property should be defined as
> +		  LED_COLOR_ID_MULTI and further definition can be found in
> +		  include/linux/leds/common.h.
> +
> +led-controller@30 {
> +	#address-cells = <1>;
> +	#size-cells = <0>;
> +	compatible = "ti,lp5024";
> +	reg = <0x29>;
> +
> +	multi-led@1 {
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +		reg = <1>;
> +		color = <LED_COLOR_ID_MULTI>;
> +		function = LED_FUNCTION_STATUS;
> +
> +
> +		led@3 {
> +			reg = <3>;
> +			color = <LED_COLOR_ID_RED>;
> +		};
> +
> +		led@4 {
> +			reg = <4>;
> +			color = <LED_COLOR_ID_GREEN>;
> +		};
> +
> +		led@5 {
> +			reg = <5>;
> +			color = <LED_COLOR_ID_BLUE>;
> +		};
> +	};
> +
> +	multi-led@2 {
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +		color = <LED_COLOR_ID_MULTI>;
> +		function = LED_FUNCTION_ACTIVITY;
> +		reg = <2>;
> +		ti,led-bank = <2 3 5>;
> +
> +		led@6 {
> +			reg = <0x6>;
> +			color = <LED_COLOR_ID_RED>;
> +			led-sources = <6 9 15>;
> +		};
> +
> +		led@7 {
> +			reg = <0x7>;
> +			color = <LED_COLOR_ID_GREEN>;
> +			led-sources = <7 10 16>;
> +		};
> +
> +		led@8 {
> +			reg = <0x8>;
> +			color = <LED_COLOR_ID_BLUE>;
> +			led-sources = <8 11 17>;
> +		};
> +	};
> +
> +	multi-led@4 {
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +		reg = <4>;
> +		color = <LED_COLOR_ID_MULTI>;
> +		function = LED_FUNCTION_ACTIVITY;
> +
> +		led@12 {
> +			reg = <12>;
> +			color = <LED_COLOR_ID_RED>;
> +		};
> +
> +		led@13 {
> +			reg = <13>;
> +			color = <LED_COLOR_ID_GREEN>;
> +		};
> +
> +		led@14 {
> +			reg = <14>;
> +			color = <LED_COLOR_ID_BLUE>;
> +		};
> +	};
> +
> +};
> 

-- 
Best regards,
Jacek Anaszewski