From: Hans de Goede <hdegoede@redhat.com>
To: Mark Gross <markgross@kernel.org>,
Andy Shevchenko <andy@kernel.org>, Pavel Machek <pavel@ucw.cz>,
Lee Jones <lee@kernel.org>,
Linus Walleij <linus.walleij@linaro.org>,
Daniel Scally <djrscally@gmail.com>,
Laurent Pinchart <laurent.pinchart@ideasonboard.com>,
Mauro Carvalho Chehab <mchehab@kernel.org>,
Sakari Ailus <sakari.ailus@linux.intel.com>
Cc: Hans de Goede <hdegoede@redhat.com>,
platform-driver-x86@vger.kernel.org, linux-leds@vger.kernel.org,
linux-gpio@vger.kernel.org, Kate Hsuan <hpa@redhat.com>,
Mark Pearson <markpearson@lenovo.com>,
Andy Yeh <andy.yeh@intel.com>, Yao Hao <yao.hao@intel.com>,
linux-media@vger.kernel.org
Subject: [PATCH v3 09/11] platform/x86: int3472/discrete: Move GPIO request to skl_int3472_register_clock()
Date: Fri, 16 Dec 2022 12:30:11 +0100 [thread overview]
Message-ID: <20221216113013.126881-10-hdegoede@redhat.com> (raw)
In-Reply-To: <20221216113013.126881-1-hdegoede@redhat.com>
Move the requesting of the clk-enable GPIO to skl_int3472_register_clock()
(and move the gpiod_put to unregister).
This mirrors the GPIO handling in skl_int3472_register_regulator() and
allows removing skl_int3472_map_gpio_to_clk() from discrete.c .
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
---
.../x86/intel/int3472/clk_and_regulator.c | 26 +++++++++++++++--
drivers/platform/x86/intel/int3472/common.h | 3 +-
drivers/platform/x86/intel/int3472/discrete.c | 28 ++-----------------
3 files changed, 28 insertions(+), 29 deletions(-)
diff --git a/drivers/platform/x86/intel/int3472/clk_and_regulator.c b/drivers/platform/x86/intel/int3472/clk_and_regulator.c
index e61119b17677..4b4d77db44ce 100644
--- a/drivers/platform/x86/intel/int3472/clk_and_regulator.c
+++ b/drivers/platform/x86/intel/int3472/clk_and_regulator.c
@@ -86,18 +86,32 @@ static const struct clk_ops skl_int3472_clock_ops = {
.recalc_rate = skl_int3472_clk_recalc_rate,
};
-int skl_int3472_register_clock(struct int3472_discrete_device *int3472)
+int skl_int3472_register_clock(struct int3472_discrete_device *int3472,
+ struct acpi_resource_gpio *agpio)
{
+ char *path = agpio->resource_source.string_ptr;
struct clk_init_data init = {
.ops = &skl_int3472_clock_ops,
.flags = CLK_GET_RATE_NOCACHE,
};
int ret;
+ if (int3472->clock.cl)
+ return -EBUSY;
+
+ int3472->clock.ena_gpio = acpi_get_and_request_gpiod(path, agpio->pin_table[0],
+ "int3472,clk-enable");
+ if (IS_ERR(int3472->clock.ena_gpio)) {
+ ret = PTR_ERR(int3472->clock.ena_gpio);
+ return dev_err_probe(int3472->dev, ret, "getting regulator GPIO\n");
+ }
+
init.name = kasprintf(GFP_KERNEL, "%s-clk",
acpi_dev_name(int3472->adev));
- if (!init.name)
- return -ENOMEM;
+ if (!init.name) {
+ ret = -ENOMEM;
+ goto out_put_gpio;
+ }
int3472->clock.frequency = skl_int3472_get_clk_frequency(int3472);
@@ -123,14 +137,20 @@ int skl_int3472_register_clock(struct int3472_discrete_device *int3472)
clk_unregister(int3472->clock.clk);
out_free_init_name:
kfree(init.name);
+out_put_gpio:
+ gpiod_put(int3472->clock.ena_gpio);
return ret;
}
void skl_int3472_unregister_clock(struct int3472_discrete_device *int3472)
{
+ if (!int3472->clock.cl)
+ return;
+
clkdev_drop(int3472->clock.cl);
clk_unregister(int3472->clock.clk);
+ gpiod_put(int3472->clock.ena_gpio);
}
int skl_int3472_register_regulator(struct int3472_discrete_device *int3472,
diff --git a/drivers/platform/x86/intel/int3472/common.h b/drivers/platform/x86/intel/int3472/common.h
index e106bbfe8ffa..5ec89038ae07 100644
--- a/drivers/platform/x86/intel/int3472/common.h
+++ b/drivers/platform/x86/intel/int3472/common.h
@@ -121,7 +121,8 @@ int skl_int3472_get_sensor_adev_and_name(struct device *dev,
struct acpi_device **sensor_adev_ret,
const char **name_ret);
-int skl_int3472_register_clock(struct int3472_discrete_device *int3472);
+int skl_int3472_register_clock(struct int3472_discrete_device *int3472,
+ struct acpi_resource_gpio *agpio);
void skl_int3472_unregister_clock(struct int3472_discrete_device *int3472);
int skl_int3472_register_regulator(struct int3472_discrete_device *int3472,
diff --git a/drivers/platform/x86/intel/int3472/discrete.c b/drivers/platform/x86/intel/int3472/discrete.c
index 1a1e0b196bfa..b7752c2b798d 100644
--- a/drivers/platform/x86/intel/int3472/discrete.c
+++ b/drivers/platform/x86/intel/int3472/discrete.c
@@ -2,8 +2,6 @@
/* Author: Dan Scally <djrscally@gmail.com> */
#include <linux/acpi.h>
-#include <linux/clkdev.h>
-#include <linux/clk-provider.h>
#include <linux/device.h>
#include <linux/gpio/consumer.h>
#include <linux/gpio/machine.h>
@@ -154,22 +152,6 @@ static int skl_int3472_map_gpio_to_sensor(struct int3472_discrete_device *int347
return 0;
}
-static int skl_int3472_map_gpio_to_clk(struct int3472_discrete_device *int3472,
- struct acpi_resource_gpio *agpio)
-{
- char *path = agpio->resource_source.string_ptr;
- u16 pin = agpio->pin_table[0];
- struct gpio_desc *gpio;
-
- gpio = acpi_get_and_request_gpiod(path, pin, "int3472,clk-enable");
- if (IS_ERR(gpio))
- return (PTR_ERR(gpio));
-
- int3472->clock.ena_gpio = gpio;
-
- return skl_int3472_register_clock(int3472);
-}
-
static void int3472_get_func_and_polarity(u8 type, const char **func, u32 *polarity)
{
switch (type) {
@@ -275,9 +257,9 @@ static int skl_int3472_handle_gpio_resources(struct acpi_resource *ares,
break;
case INT3472_GPIO_TYPE_CLK_ENABLE:
- ret = skl_int3472_map_gpio_to_clk(int3472, agpio);
+ ret = skl_int3472_register_clock(int3472, agpio);
if (ret)
- err_msg = "Failed to map GPIO to clock\n";
+ err_msg = "Failed to register clock\n";
break;
case INT3472_GPIO_TYPE_PRIVACY_LED:
@@ -340,11 +322,7 @@ static int skl_int3472_discrete_remove(struct platform_device *pdev)
gpiod_remove_lookup_table(&int3472->gpios);
- if (int3472->clock.cl)
- skl_int3472_unregister_clock(int3472);
-
- gpiod_put(int3472->clock.ena_gpio);
-
+ skl_int3472_unregister_clock(int3472);
skl_int3472_unregister_pled(int3472);
skl_int3472_unregister_regulator(int3472);
--
2.38.1
next prev parent reply other threads:[~2022-12-16 11:32 UTC|newest]
Thread overview: 48+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-12-16 11:30 [PATCH v3 00/11] leds: lookup-table support + int3472/media privacy LED support Hans de Goede
2022-12-16 11:30 ` [PATCH v3 01/11] leds: led-class: Add missing put_device() to led_put() Hans de Goede
2022-12-16 13:35 ` Andy Shevchenko
2022-12-16 13:55 ` Andy Shevchenko
2022-12-16 15:22 ` Hans de Goede
2022-12-16 11:30 ` [PATCH v3 02/11] leds: led-class: Add __led_get() helper function Hans de Goede
2022-12-16 13:54 ` Andy Shevchenko
2022-12-16 15:46 ` Hans de Goede
2022-12-16 11:30 ` [PATCH v3 03/11] leds: led-class: Add __of_led_get() helper Hans de Goede
2022-12-16 13:50 ` Andy Shevchenko
2022-12-16 15:52 ` Hans de Goede
2022-12-16 16:05 ` Andy Shevchenko
2022-12-16 11:30 ` [PATCH v3 04/11] leds: led-class: Add __devm_led_get() helper Hans de Goede
2022-12-16 11:30 ` [PATCH v3 05/11] leds: led-class: Add generic [devm_]led_get() Hans de Goede
2022-12-16 13:43 ` Andy Shevchenko
2022-12-16 15:54 ` Hans de Goede
2022-12-16 16:07 ` Andy Shevchenko
2022-12-16 16:12 ` Hans de Goede
2022-12-16 14:15 ` Andy Shevchenko
2022-12-18 23:20 ` Linus Walleij
2022-12-16 11:30 ` [PATCH v3 06/11] v4l: subdev: Make the v4l2-subdev core code enable/disable the privacy LED if present Hans de Goede
2022-12-16 13:56 ` Laurent Pinchart
2022-12-16 13:59 ` Laurent Pinchart
2022-12-16 15:45 ` Hans de Goede
2022-12-16 16:44 ` Laurent Pinchart
2022-12-16 16:52 ` Hans de Goede
2022-12-16 14:02 ` Andy Shevchenko
2022-12-16 16:12 ` Hans de Goede
2022-12-16 11:30 ` [PATCH v3 07/11] platform/x86: int3472/discrete: Refactor GPIO to sensor mapping Hans de Goede
2022-12-16 13:57 ` Andy Shevchenko
2022-12-16 16:15 ` Hans de Goede
2022-12-16 16:26 ` Andy Shevchenko
2022-12-16 11:30 ` [PATCH v3 08/11] platform/x86: int3472/discrete: Create a LED class device for the privacy LED Hans de Goede
2022-12-16 14:16 ` Andy Shevchenko
2022-12-16 16:29 ` Hans de Goede
2022-12-16 17:14 ` Andy Shevchenko
2023-01-11 11:35 ` Hans de Goede
2022-12-16 11:30 ` Hans de Goede [this message]
2022-12-16 14:20 ` [PATCH v3 09/11] platform/x86: int3472/discrete: Move GPIO request to skl_int3472_register_clock() Andy Shevchenko
2022-12-16 16:35 ` Hans de Goede
2022-12-16 17:15 ` Andy Shevchenko
2022-12-16 11:30 ` [PATCH v3 10/11] platform/x86: int3472/discrete: Ensure the clk/power enable pins are in output mode Hans de Goede
2022-12-16 11:30 ` [PATCH v3 11/11] platform/x86: int3472/discrete: Get the polarity from the _DSM entry Hans de Goede
2022-12-16 14:57 ` Andy Shevchenko
2022-12-16 14:57 ` Andy Shevchenko
2022-12-16 16:42 ` Hans de Goede
2022-12-16 17:20 ` Andy Shevchenko
2022-12-16 12:02 ` [PATCH v3 00/11] leds: lookup-table support + int3472/media privacy LED support Hans de Goede
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20221216113013.126881-10-hdegoede@redhat.com \
--to=hdegoede@redhat.com \
--cc=andy.yeh@intel.com \
--cc=andy@kernel.org \
--cc=djrscally@gmail.com \
--cc=hpa@redhat.com \
--cc=laurent.pinchart@ideasonboard.com \
--cc=lee@kernel.org \
--cc=linus.walleij@linaro.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-leds@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=markgross@kernel.org \
--cc=markpearson@lenovo.com \
--cc=mchehab@kernel.org \
--cc=pavel@ucw.cz \
--cc=platform-driver-x86@vger.kernel.org \
--cc=sakari.ailus@linux.intel.com \
--cc=yao.hao@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox