From: Hans de Goede <hdegoede@redhat.com>
To: Mark Gross <markgross@kernel.org>,
Andy Shevchenko <andy@kernel.org>, Pavel Machek <pavel@ucw.cz>,
Lee Jones <lee@kernel.org>,
Linus Walleij <linus.walleij@linaro.org>,
Daniel Scally <djrscally@gmail.com>,
Laurent Pinchart <laurent.pinchart@ideasonboard.com>,
Mauro Carvalho Chehab <mchehab@kernel.org>,
Sakari Ailus <sakari.ailus@linux.intel.com>
Cc: Hans de Goede <hdegoede@redhat.com>,
platform-driver-x86@vger.kernel.org, linux-leds@vger.kernel.org,
linux-gpio@vger.kernel.org, Kate Hsuan <hpa@redhat.com>,
Mark Pearson <markpearson@lenovo.com>,
Andy Yeh <andy.yeh@intel.com>, Yao Hao <yao.hao@intel.com>,
linux-media@vger.kernel.org
Subject: [PATCH v3 05/11] leds: led-class: Add generic [devm_]led_get()
Date: Fri, 16 Dec 2022 12:30:07 +0100 [thread overview]
Message-ID: <20221216113013.126881-6-hdegoede@redhat.com> (raw)
In-Reply-To: <20221216113013.126881-1-hdegoede@redhat.com>
Add a generic [devm_]led_get() method which can be used on both devicetree
and non devicetree platforms to get a LED classdev associated with
a specific function on a specific device, e.g. the privacy LED associated
with a specific camera sensor.
Note unlike of_led_get() this takes a string describing the function
rather then an index. This is done because e.g. camera sensors might
have a privacy LED, or a flash LED, or both and using an index
approach leaves it unclear what the function of index 0 is if there is
only 1 LED. The existing of support is extended to also support
getting a LED by function-name using the standard devicetree pattern
of adding a -names string array to map names to the indexes.
For non devicetree platforms a lookup-table mechanism is added to
allow the platform code to map specific LED class_dev-s to specific
device,function combinations this way.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
---
drivers/leds/led-class.c | 91 ++++++++++++++++++++++++++++++++++++++++
include/linux/leds.h | 18 ++++++++
2 files changed, 109 insertions(+)
diff --git a/drivers/leds/led-class.c b/drivers/leds/led-class.c
index 6e25c411ba35..76b3ab66eb88 100644
--- a/drivers/leds/led-class.c
+++ b/drivers/leds/led-class.c
@@ -23,6 +23,8 @@
#include "leds.h"
static struct class *leds_class;
+static DEFINE_MUTEX(leds_lookup_lock);
+static LIST_HEAD(leds_lookup_list);
static ssize_t brightness_show(struct device *dev,
struct device_attribute *attr, char *buf)
@@ -329,6 +331,95 @@ struct led_classdev *__must_check devm_of_led_get(struct device *dev,
}
EXPORT_SYMBOL_GPL(devm_of_led_get);
+/**
+ * led_get() - request a LED device via the LED framework
+ * @dev: device for which to get the LED device
+ * @function: string describing the function of the LED device
+ *
+ * @return a pointer to a LED device or ERR_PTR(errno) on failure.
+ */
+struct led_classdev *led_get(struct device *dev, char *function)
+{
+ struct led_lookup_data *lookup;
+ struct led_classdev *led_cdev;
+ const char *led_name = NULL;
+ struct device *led_dev;
+
+ if (dev->of_node) {
+ led_cdev = __of_led_get(dev->of_node, -1, function);
+ if (!IS_ERR(led_cdev) || PTR_ERR(led_cdev) != -ENOENT)
+ return led_cdev;
+ }
+
+ mutex_lock(&leds_lookup_lock);
+ list_for_each_entry(lookup, &leds_lookup_list, list) {
+ if (!strcmp(lookup->consumer_dev_name, dev_name(dev)) &&
+ !strcmp(lookup->consumer_function, function)) {
+ led_name = kstrdup(lookup->led_name, GFP_KERNEL);
+ break;
+ }
+ }
+ mutex_unlock(&leds_lookup_lock);
+
+ if (!led_name)
+ return ERR_PTR(-ENOENT);
+
+ led_dev = class_find_device_by_name(leds_class, led_name);
+ kfree(led_name);
+
+ return __led_get(led_dev);
+}
+EXPORT_SYMBOL_GPL(led_get);
+
+/**
+ * devm_led_get() - request a LED device via the LED framework
+ * @dev: device for which to get the LED device
+ * @function: string describing the function of the LED device
+ *
+ * The LED device returned from this function is automatically released
+ * on driver detach.
+ *
+ * @return a pointer to a LED device or ERR_PTR(errno) on failure.
+ */
+struct led_classdev *devm_led_get(struct device *dev, char *function)
+{
+ struct led_classdev *led;
+
+ led = led_get(dev, function);
+ if (IS_ERR(led))
+ return led;
+
+ return __devm_led_get(dev, led);
+}
+EXPORT_SYMBOL_GPL(devm_led_get);
+
+/**
+ * led_add_lookup() - Add a LED lookup table entry
+ * @led_lookup: the lookup table entry to add
+ *
+ * Add a LED lookup table entry. On systems without devicetree the lookup table
+ * is used by led_get() to find LEDs.
+ */
+void led_add_lookup(struct led_lookup_data *led_lookup)
+{
+ mutex_lock(&leds_lookup_lock);
+ list_add_tail(&led_lookup->list, &leds_lookup_list);
+ mutex_unlock(&leds_lookup_lock);
+}
+EXPORT_SYMBOL_GPL(led_add_lookup);
+
+/**
+ * led_remove_lookup() - Remove a LED lookup table entry
+ * @led_lookup: the lookup table entry to remove
+ */
+void led_remove_lookup(struct led_lookup_data *led_lookup)
+{
+ mutex_lock(&leds_lookup_lock);
+ list_del(&led_lookup->list);
+ mutex_unlock(&leds_lookup_lock);
+}
+EXPORT_SYMBOL_GPL(led_remove_lookup);
+
static int led_classdev_next_name(const char *init_name, char *name,
size_t len)
{
diff --git a/include/linux/leds.h b/include/linux/leds.h
index ba4861ec73d3..e44fc5ec7c9a 100644
--- a/include/linux/leds.h
+++ b/include/linux/leds.h
@@ -39,6 +39,18 @@ enum led_default_state {
LEDS_DEFSTATE_KEEP = 2,
};
+/*
+ * This is used to tell led_get() device which led_classdev to return for
+ * a specific consumer device-name, function pair on non devicetree platforms.
+ * Note all strings must be set.
+ */
+struct led_lookup_data {
+ struct list_head list;
+ const char *led_name;
+ const char *consumer_dev_name;
+ const char *consumer_function;
+};
+
struct led_init_data {
/* device fwnode handle */
struct fwnode_handle *fwnode;
@@ -211,6 +223,12 @@ void devm_led_classdev_unregister(struct device *parent,
void led_classdev_suspend(struct led_classdev *led_cdev);
void led_classdev_resume(struct led_classdev *led_cdev);
+void led_add_lookup(struct led_lookup_data *led_lookup);
+void led_remove_lookup(struct led_lookup_data *led_lookup);
+
+struct led_classdev *__must_check led_get(struct device *dev, char *function);
+struct led_classdev *__must_check devm_led_get(struct device *dev, char *function);
+
extern struct led_classdev *of_led_get(struct device_node *np, int index);
extern void led_put(struct led_classdev *led_cdev);
struct led_classdev *__must_check devm_of_led_get(struct device *dev,
--
2.38.1
next prev parent reply other threads:[~2022-12-16 11:31 UTC|newest]
Thread overview: 48+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-12-16 11:30 [PATCH v3 00/11] leds: lookup-table support + int3472/media privacy LED support Hans de Goede
2022-12-16 11:30 ` [PATCH v3 01/11] leds: led-class: Add missing put_device() to led_put() Hans de Goede
2022-12-16 13:35 ` Andy Shevchenko
2022-12-16 13:55 ` Andy Shevchenko
2022-12-16 15:22 ` Hans de Goede
2022-12-16 11:30 ` [PATCH v3 02/11] leds: led-class: Add __led_get() helper function Hans de Goede
2022-12-16 13:54 ` Andy Shevchenko
2022-12-16 15:46 ` Hans de Goede
2022-12-16 11:30 ` [PATCH v3 03/11] leds: led-class: Add __of_led_get() helper Hans de Goede
2022-12-16 13:50 ` Andy Shevchenko
2022-12-16 15:52 ` Hans de Goede
2022-12-16 16:05 ` Andy Shevchenko
2022-12-16 11:30 ` [PATCH v3 04/11] leds: led-class: Add __devm_led_get() helper Hans de Goede
2022-12-16 11:30 ` Hans de Goede [this message]
2022-12-16 13:43 ` [PATCH v3 05/11] leds: led-class: Add generic [devm_]led_get() Andy Shevchenko
2022-12-16 15:54 ` Hans de Goede
2022-12-16 16:07 ` Andy Shevchenko
2022-12-16 16:12 ` Hans de Goede
2022-12-16 14:15 ` Andy Shevchenko
2022-12-18 23:20 ` Linus Walleij
2022-12-16 11:30 ` [PATCH v3 06/11] v4l: subdev: Make the v4l2-subdev core code enable/disable the privacy LED if present Hans de Goede
2022-12-16 13:56 ` Laurent Pinchart
2022-12-16 13:59 ` Laurent Pinchart
2022-12-16 15:45 ` Hans de Goede
2022-12-16 16:44 ` Laurent Pinchart
2022-12-16 16:52 ` Hans de Goede
2022-12-16 14:02 ` Andy Shevchenko
2022-12-16 16:12 ` Hans de Goede
2022-12-16 11:30 ` [PATCH v3 07/11] platform/x86: int3472/discrete: Refactor GPIO to sensor mapping Hans de Goede
2022-12-16 13:57 ` Andy Shevchenko
2022-12-16 16:15 ` Hans de Goede
2022-12-16 16:26 ` Andy Shevchenko
2022-12-16 11:30 ` [PATCH v3 08/11] platform/x86: int3472/discrete: Create a LED class device for the privacy LED Hans de Goede
2022-12-16 14:16 ` Andy Shevchenko
2022-12-16 16:29 ` Hans de Goede
2022-12-16 17:14 ` Andy Shevchenko
2023-01-11 11:35 ` Hans de Goede
2022-12-16 11:30 ` [PATCH v3 09/11] platform/x86: int3472/discrete: Move GPIO request to skl_int3472_register_clock() Hans de Goede
2022-12-16 14:20 ` Andy Shevchenko
2022-12-16 16:35 ` Hans de Goede
2022-12-16 17:15 ` Andy Shevchenko
2022-12-16 11:30 ` [PATCH v3 10/11] platform/x86: int3472/discrete: Ensure the clk/power enable pins are in output mode Hans de Goede
2022-12-16 11:30 ` [PATCH v3 11/11] platform/x86: int3472/discrete: Get the polarity from the _DSM entry Hans de Goede
2022-12-16 14:57 ` Andy Shevchenko
2022-12-16 14:57 ` Andy Shevchenko
2022-12-16 16:42 ` Hans de Goede
2022-12-16 17:20 ` Andy Shevchenko
2022-12-16 12:02 ` [PATCH v3 00/11] leds: lookup-table support + int3472/media privacy LED support Hans de Goede
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20221216113013.126881-6-hdegoede@redhat.com \
--to=hdegoede@redhat.com \
--cc=andy.yeh@intel.com \
--cc=andy@kernel.org \
--cc=djrscally@gmail.com \
--cc=hpa@redhat.com \
--cc=laurent.pinchart@ideasonboard.com \
--cc=lee@kernel.org \
--cc=linus.walleij@linaro.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-leds@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=markgross@kernel.org \
--cc=markpearson@lenovo.com \
--cc=mchehab@kernel.org \
--cc=pavel@ucw.cz \
--cc=platform-driver-x86@vger.kernel.org \
--cc=sakari.ailus@linux.intel.com \
--cc=yao.hao@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox