From: <gerg@snapgear.com>
To: linux-m68k@vger.kernel.org, uclinux-dev@uclinux.org, sfking@fdwdc.com
Cc: Greg Ungerer <gerg@uclinux.org>
Subject: [PATCH 19/22] m68knommu: simplify the ColdFire 528x GPIO struct setup
Date: Thu, 26 Apr 2012 10:25:59 +1000 [thread overview]
Message-ID: <1335399962-10308-20-git-send-email-gerg@snapgear.com> (raw)
In-Reply-To: <1335399962-10308-1-git-send-email-gerg@snapgear.com>
From: Greg Ungerer <gerg@uclinux.org>
The GPIO data struct setup is now the only remaining code in the platform
gpio.c file. So move it to the platform config.c code and remove the gpio.c
file.
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
---
arch/m68k/platform/528x/Makefile | 2 +-
arch/m68k/platform/528x/config.c | 31 ++++++++++++++++++++++++
arch/m68k/platform/528x/gpio.c | 49 --------------------------------------
3 files changed, 32 insertions(+), 50 deletions(-)
delete mode 100644 arch/m68k/platform/528x/gpio.c
diff --git a/arch/m68k/platform/528x/Makefile b/arch/m68k/platform/528x/Makefile
index 6ac4b57..8755c9e 100644
--- a/arch/m68k/platform/528x/Makefile
+++ b/arch/m68k/platform/528x/Makefile
@@ -14,5 +14,5 @@
asflags-$(CONFIG_FULLDEBUG) := -DDEBUGGER_COMPATIBLE_CACHE=1
-obj-y := config.o gpio.o
+obj-y := config.o
diff --git a/arch/m68k/platform/528x/config.c b/arch/m68k/platform/528x/config.c
index d449292..3ea9545 100644
--- a/arch/m68k/platform/528x/config.c
+++ b/arch/m68k/platform/528x/config.c
@@ -21,6 +21,37 @@
#include <asm/coldfire.h>
#include <asm/mcfsim.h>
#include <asm/mcfuart.h>
+#include <asm/mcfgpio.h>
+
+/***************************************************************************/
+
+struct mcf_gpio_chip mcf_gpio_chips[] = {
+ MCFGPS(NQ, 1, 7, MCFEPORT_EPDDR, MCFEPORT_EPDR, MCFEPORT_EPPDR),
+ MCFGPS(TA, 8, 4, MCFGPTA_GPTDDR, MCFGPTA_GPTPORT, MCFGPTB_GPTPORT),
+ MCFGPS(TB, 16, 4, MCFGPTB_GPTDDR, MCFGPTB_GPTPORT, MCFGPTB_GPTPORT),
+ MCFGPS(QA, 24, 4, MCFQADC_DDRQA, MCFQADC_PORTQA, MCFQADC_PORTQA),
+ MCFGPS(QA, 32, 4, MCFQADC_DDRQB, MCFQADC_PORTQB, MCFQADC_PORTQB),
+ MCFGPF(A, 40, 8),
+ MCFGPF(B, 48, 8),
+ MCFGPF(C, 56, 8),
+ MCFGPF(D, 64, 8),
+ MCFGPF(E, 72, 8),
+ MCFGPF(F, 80, 8),
+ MCFGPF(G, 88, 8),
+ MCFGPF(H, 96, 8),
+ MCFGPF(J, 104, 8),
+ MCFGPF(DD, 112, 8),
+ MCFGPF(EH, 120, 8),
+ MCFGPF(EL, 128, 8),
+ MCFGPF(AS, 136, 6),
+ MCFGPF(QS, 144, 7),
+ MCFGPF(SD, 152, 6),
+ MCFGPF(TC, 160, 4),
+ MCFGPF(TD, 168, 4),
+ MCFGPF(UA, 176, 4),
+};
+
+unsigned int mcf_gpio_chips_size = ARRAY_SIZE(mcf_gpio_chips);
/***************************************************************************/
diff --git a/arch/m68k/platform/528x/gpio.c b/arch/m68k/platform/528x/gpio.c
deleted file mode 100644
index 764c6c8..0000000
--- a/arch/m68k/platform/528x/gpio.c
+++ /dev/null
@@ -1,49 +0,0 @@
-/*
- * Coldfire generic GPIO support
- *
- * (C) Copyright 2009, Steven King <sfking@fdwdc.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
-*/
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-
-#include <asm/coldfire.h>
-#include <asm/mcfsim.h>
-#include <asm/mcfgpio.h>
-
-struct mcf_gpio_chip mcf_gpio_chips[] = {
- MCFGPS(NQ, 1, 7, MCFEPORT_EPDDR, MCFEPORT_EPDR, MCFEPORT_EPPDR),
- MCFGPS(TA, 8, 4, MCFGPTA_GPTDDR, MCFGPTA_GPTPORT, MCFGPTB_GPTPORT),
- MCFGPS(TB, 16, 4, MCFGPTB_GPTDDR, MCFGPTB_GPTPORT, MCFGPTB_GPTPORT),
- MCFGPS(QA, 24, 4, MCFQADC_DDRQA, MCFQADC_PORTQA, MCFQADC_PORTQA),
- MCFGPS(QA, 32, 4, MCFQADC_DDRQB, MCFQADC_PORTQB, MCFQADC_PORTQB),
- MCFGPF(A, 40, 8),
- MCFGPF(B, 48, 8),
- MCFGPF(C, 56, 8),
- MCFGPF(D, 64, 8),
- MCFGPF(E, 72, 8),
- MCFGPF(F, 80, 8),
- MCFGPF(G, 88, 8),
- MCFGPF(H, 96, 8),
- MCFGPF(J, 104, 8),
- MCFGPF(DD, 112, 8),
- MCFGPF(EH, 120, 8),
- MCFGPF(EL, 128, 8),
- MCFGPF(AS, 136, 6),
- MCFGPF(QS, 144, 7),
- MCFGPF(SD, 152, 6),
- MCFGPF(TC, 160, 4),
- MCFGPF(TD, 168, 4),
- MCFGPF(UA, 176, 4),
-};
-
-unsigned int mcf_gpio_chips_size = ARRAY_SIZE(mcf_gpio_chips);
--
1.7.0.4
next prev parent reply other threads:[~2012-04-26 0:27 UTC|newest]
Thread overview: 33+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-04-26 0:25 [PATCH 00/22] m68knommu: simplify ColdFire GPIO init code gerg
2012-04-26 0:25 ` [PATCH 01/22] m68knommu: introduce macros to simplify ColdFire GPIO table initialization gerg
2012-04-26 7:16 ` Philippe De Muyter
2012-04-26 9:59 ` Greg Ungerer
2012-04-26 0:25 ` [PATCH 02/22] m68knommu: switch to GPIO init macros in ColdFire 5206 init code gerg
2012-04-26 0:25 ` [PATCH 03/22] m68knommu: switch to GPIO init macros in ColdFire 520x " gerg
2012-04-26 0:25 ` [PATCH 04/22] m68knommu: switch to GPIO init macros in ColdFire 523x " gerg
2012-04-26 0:25 ` [PATCH 05/22] m68knommu: switch to GPIO init macros in ColdFire 5249 " gerg
2012-04-26 0:25 ` [PATCH 06/22] m68knommu: switch to GPIO init macros in ColdFire 5272 " gerg
2012-04-26 0:25 ` [PATCH 07/22] m68knommu: switch to GPIO init macros in ColdFire 527x " gerg
2012-04-26 0:25 ` [PATCH 08/22] m68knommu: switch to GPIO init macros in ColdFire 528x " gerg
2012-04-27 2:49 ` Finn Thain
2012-04-27 6:36 ` Greg Ungerer
2012-04-26 0:25 ` [PATCH 09/22] m68knommu: switch to GPIO init macros in ColdFire 5307 " gerg
2012-04-26 0:25 ` [PATCH 10/22] m68knommu: switch to GPIO init macros in ColdFire 5407 " gerg
2012-04-26 0:25 ` [PATCH 11/22] m68knommu: switch to GPIO init macros in ColdFire 532x " gerg
2012-04-26 0:25 ` [PATCH 12/22] m68knommu: make duplicated ColdFire GPIO init code common for all gerg
2012-04-26 0:25 ` [PATCH 13/22] m68knommu: simplify the ColdFire 5206 GPIO struct setup gerg
2012-04-26 0:25 ` [PATCH 14/22] m68knommu: simplify the ColdFire 520x " gerg
2012-04-26 0:25 ` [PATCH 15/22] m68knommu: simplify the ColdFire 523x " gerg
2012-04-26 0:25 ` [PATCH 16/22] m68knommu: simplify the ColdFire 5249 " gerg
2012-04-26 0:25 ` [PATCH 17/22] m68knommu: simplify the ColdFire 5272 " gerg
2012-04-26 0:25 ` [PATCH 18/22] m68knommu: simplify the ColdFire 527x " gerg
2012-04-26 0:25 ` gerg [this message]
2012-04-26 0:26 ` [PATCH 20/22] m68knommu: simplify the ColdFire 5307 " gerg
2012-04-26 0:26 ` [PATCH 21/22] m68knommu: simplify the ColdFire 532x " gerg
2012-04-26 0:36 ` mohamed nabil
2012-04-26 0:45 ` Greg Ungerer
2012-04-26 16:14 ` Lennart Sorensen
2012-04-26 20:45 ` burcu sariozlu
2012-04-26 0:26 ` [PATCH 22/22] m68knommu: simplify the ColdFire 5407 " gerg
2012-04-26 7:28 ` [PATCH 00/22] m68knommu: simplify ColdFire GPIO init code Steven King
2012-04-26 10:02 ` Greg Ungerer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1335399962-10308-20-git-send-email-gerg@snapgear.com \
--to=gerg@snapgear.com \
--cc=gerg@uclinux.org \
--cc=linux-m68k@vger.kernel.org \
--cc=sfking@fdwdc.com \
--cc=uclinux-dev@uclinux.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox