From: Sergei Shtylyov <sshtylyov@ru.mvista.com>
To: bzolnier@gmail.com
Cc: linux-ide@vger.kernel.org, linux-m68k@vger.kernel.org
Subject: [PATCH 4/10] ide: move IRQ clearing from ack_intr() method to clear_irq() method (take 2)
Date: Sat, 13 Jun 2009 17:31:00 +0400 [thread overview]
Message-ID: <200906131731.00976.sshtylyov@ru.mvista.com> (raw)
In-Reply-To: <200702140101.26639.sshtylyov@ru.mvista.com>
There are now two methods that clear the port interrupt: ack_intr() method,
implemented only on M680x0 machines, that is called at the start of ide_intr(),
and clear_irq() method, that is called somewhat later in this function. In
order to stop this duplication, delegate the task of clearing the interrupt
to clear_irq() method, only leaving to ack_intr() the task of testing for the
port interrupt.
Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
---
The patch is atop of ide-2.6.git 'for-next' branch.
Changes since previous take:
- undid the code reordering in ide_intr();
- converted xsurf_ack_intr() into xsurf_clear_irq();
- fixed error in gayle_init() by adding missed &;
- fixed 2 warnings by making macide_clear_irq() void.
drivers/ide/buddha.c | 27 +++++++++++++--------------
drivers/ide/gayle.c | 23 +++++++++++------------
drivers/ide/ide-io.c | 2 --
drivers/ide/macide.c | 18 ++++++++++++++----
4 files changed, 38 insertions(+), 32 deletions(-)
Index: ide-2.6/drivers/ide/buddha.c
===================================================================
--- ide-2.6.orig/drivers/ide/buddha.c
+++ ide-2.6/drivers/ide/buddha.c
@@ -109,16 +109,12 @@ static int buddha_ack_intr(ide_hwif_t *h
return 1;
}
-static int xsurf_ack_intr(ide_hwif_t *hwif)
+static void xsurf_clear_irq(ide_drive_t *drive)
{
- unsigned char ch;
-
- ch = z_readb(hwif->io_ports.irq_addr);
- /* X-Surf needs a 0 written to IRQ register to ensure ISA bit A11 stays at 0 */
- z_writeb(0, hwif->io_ports.irq_addr);
- if (!(ch & 0x80))
- return 0;
- return 1;
+ /*
+ * X-Surf needs 0 written to IRQ register to ensure ISA bit A11 stays at 0
+ */
+ z_writeb(0, drive->hwif->io_ports.irq_addr);
}
static void __init buddha_setup_ports(struct ide_hw *hw, unsigned long base,
@@ -141,6 +137,10 @@ static void __init buddha_setup_ports(st
hw->ack_intr = ack_intr;
}
+static const struct ide_port_ops xsurf_port_ops = {
+ .clear_irq = xsurf_clear_irq,
+};
+
static const struct ide_port_info buddha_port_info = {
.host_flags = IDE_HFLAG_MMIO | IDE_HFLAG_NO_DMA,
.irq_flags = IRQF_SHARED,
@@ -161,6 +161,7 @@ static int __init buddha_init(void)
while ((z = zorro_find_device(ZORRO_WILDCARD, z))) {
unsigned long board;
struct ide_hw hw[MAX_NUM_HWIFS], *hws[MAX_NUM_HWIFS];
+ struct ide_port_info d = buddha_port_info;
if (z->id == ZORRO_PROD_INDIVIDUAL_COMPUTERS_BUDDHA) {
buddha_num_hwifs = BUDDHA_NUM_HWIFS;
@@ -171,6 +172,7 @@ static int __init buddha_init(void)
} else if (z->id == ZORRO_PROD_INDIVIDUAL_COMPUTERS_X_SURF) {
buddha_num_hwifs = XSURF_NUM_HWIFS;
type=BOARD_XSURF;
+ d.port_ops = &xsurf_port_ops;
} else
continue;
@@ -203,28 +205,25 @@ fail_base2:
for (i = 0; i < buddha_num_hwifs; i++) {
unsigned long base, ctl, irq_port;
- ide_ack_intr_t *ack_intr;
if (type != BOARD_XSURF) {
base = buddha_board + buddha_bases[i];
ctl = base + BUDDHA_CONTROL;
irq_port = buddha_board + buddha_irqports[i];
- ack_intr = buddha_ack_intr;
} else {
base = buddha_board + xsurf_bases[i];
/* X-Surf has no CS1* (Control/AltStat) */
ctl = 0;
irq_port = buddha_board + xsurf_irqports[i];
- ack_intr = xsurf_ack_intr;
}
buddha_setup_ports(&hw[i], base, ctl, irq_port,
- ack_intr);
+ buddha_ack_intr);
hws[i] = &hw[i];
}
- ide_host_add(&buddha_port_info, hws, i, NULL);
+ ide_host_add(&d, hws, i, NULL);
}
return 0;
Index: ide-2.6/drivers/ide/gayle.c
===================================================================
--- ide-2.6.orig/drivers/ide/gayle.c
+++ ide-2.6/drivers/ide/gayle.c
@@ -66,7 +66,7 @@ MODULE_PARM_DESC(doubler, "enable suppor
* Check and acknowledge the interrupt status
*/
-static int gayle_ack_intr_a4000(ide_hwif_t *hwif)
+static int gayle_ack_intr(ide_hwif_t *hwif)
{
unsigned char ch;
@@ -76,16 +76,12 @@ static int gayle_ack_intr_a4000(ide_hwif
return 1;
}
-static int gayle_ack_intr_a1200(ide_hwif_t *hwif)
+static void gayle_a1200_clear_irq(ide_drive_t *drive)
{
- unsigned char ch;
+ ide_hwif_t *hwif = drive->hwif;
- ch = z_readb(hwif->io_ports.irq_addr);
- if (!(ch & GAYLE_IRQ_IDE))
- return 0;
(void)z_readb(hwif->io_ports.status_addr);
z_writeb(0x7c, hwif->io_ports.irq_addr);
- return 1;
}
static void __init gayle_setup_ports(struct ide_hw *hw, unsigned long base,
@@ -108,6 +104,10 @@ static void __init gayle_setup_ports(str
hw->ack_intr = ack_intr;
}
+static const struct ide_port_ops gayle_a1200_port_ops = {
+ .clear_irq = gayle_a1200_clear_irq,
+};
+
static const struct ide_port_info gayle_port_info = {
.host_flags = IDE_HFLAG_MMIO | IDE_HFLAG_SERIALIZE |
IDE_HFLAG_NO_DMA,
@@ -123,9 +123,9 @@ static int __init gayle_init(void)
{
unsigned long phys_base, res_start, res_n;
unsigned long base, ctrlport, irqport;
- ide_ack_intr_t *ack_intr;
int a4000, i, rc;
struct ide_hw hw[GAYLE_NUM_HWIFS], *hws[GAYLE_NUM_HWIFS];
+ struct ide_port_info d = gayle_port_info;
if (!MACH_IS_AMIGA)
return -ENODEV;
@@ -148,11 +148,10 @@ found:
if (a4000) {
phys_base = GAYLE_BASE_4000;
irqport = (unsigned long)ZTWO_VADDR(GAYLE_IRQ_4000);
- ack_intr = gayle_ack_intr_a4000;
} else {
phys_base = GAYLE_BASE_1200;
irqport = (unsigned long)ZTWO_VADDR(GAYLE_IRQ_1200);
- ack_intr = gayle_ack_intr_a1200;
+ d.port_ops = &gayle_a1200_port_ops;
}
res_start = ((unsigned long)phys_base) & ~(GAYLE_NEXT_PORT-1);
@@ -165,12 +164,12 @@ found:
base = (unsigned long)ZTWO_VADDR(phys_base + i * GAYLE_NEXT_PORT);
ctrlport = GAYLE_HAS_CONTROL_REG ? (base + GAYLE_CONTROL) : 0;
- gayle_setup_ports(&hw[i], base, ctrlport, irqport, ack_intr);
+ gayle_setup_ports(&hw[i], base, ctrlport, irqport, gayle_ack_intr);
hws[i] = &hw[i];
}
- rc = ide_host_add(&gayle_port_info, hws, i, NULL);
+ rc = ide_host_add(&d, hws, i, NULL);
if (rc)
release_mem_region(res_start, res_n);
Index: ide-2.6/drivers/ide/ide-io.c
===================================================================
--- ide-2.6.orig/drivers/ide/ide-io.c
+++ ide-2.6/drivers/ide/ide-io.c
@@ -671,8 +671,6 @@ void ide_timer_expiry (unsigned long dat
} else if (drive_is_ready(drive)) {
if (drive->waiting_for_dma)
hwif->dma_ops->dma_lost_irq(drive);
- if (hwif->ack_intr)
- hwif->ack_intr(hwif);
if (hwif->port_ops && hwif->port_ops->clear_irq)
hwif->port_ops->clear_irq(drive);
Index: ide-2.6/drivers/ide/macide.c
===================================================================
--- ide-2.6.orig/drivers/ide/macide.c
+++ ide-2.6/drivers/ide/macide.c
@@ -55,13 +55,16 @@ volatile unsigned char *ide_ifr = (unsig
int macide_ack_intr(ide_hwif_t* hwif)
{
- if (*ide_ifr & 0x20) {
- *ide_ifr &= ~0x20;
+ if (*ide_ifr & 0x20)
return 1;
- }
return 0;
}
+static void macide_clear_irq(ide_drive_t *drive)
+{
+ *ide_ifr &= ~0x20;
+}
+
static void __init macide_setup_ports(struct ide_hw *hw, unsigned long base,
int irq, ide_ack_intr_t *ack_intr)
{
@@ -78,7 +81,12 @@ static void __init macide_setup_ports(st
hw->ack_intr = ack_intr;
}
+static const struct ide_port_ops macide_port_ops = {
+ .clear_irq = macide_clear_irq,
+};
+
static const struct ide_port_info macide_port_info = {
+ .port_ops = &macide_port_ops,
.host_flags = IDE_HFLAG_MMIO | IDE_HFLAG_NO_DMA,
.irq_flags = IRQF_SHARED,
.chipset = ide_generic,
@@ -97,6 +105,7 @@ static int __init macide_init(void)
unsigned long base;
int irq;
struct ide_hw hw, *hws[] = { &hw };
+ struct ide_port_info d = macide_port_info;
if (!MACH_IS_MAC)
return -ENODEV;
@@ -115,6 +124,7 @@ static int __init macide_init(void)
case MAC_IDE_BABOON:
base = BABOON_BASE;
ack_intr = NULL;
+ d.port_ops = NULL;
irq = IRQ_BABOON_1;
break;
default:
@@ -126,7 +136,7 @@ static int __init macide_init(void)
macide_setup_ports(&hw, base, irq, ack_intr);
- return ide_host_add(&macide_port_info, hws, 1, NULL);
+ return ide_host_add(&d, hws, 1, NULL);
}
module_init(macide_init);
next parent reply other threads:[~2009-06-13 13:29 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <200702140101.26639.sshtylyov@ru.mvista.com>
2009-06-13 13:31 ` Sergei Shtylyov [this message]
2009-06-13 13:31 ` [PATCH 5/10] ide: move ack_intr() method into 'struct ide_port_ops' (take 2) Sergei Shtylyov
2009-06-13 16:15 ` Finn Thain
2009-06-14 3:37 ` Finn Thain
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200906131731.00976.sshtylyov@ru.mvista.com \
--to=sshtylyov@ru.mvista.com \
--cc=bzolnier@gmail.com \
--cc=linux-ide@vger.kernel.org \
--cc=linux-m68k@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox