From: Sergei Shtylyov <sshtylyov@ru.mvista.com>
To: bzolnier@gmail.com
Cc: linux-ide@vger.kernel.org, linux-m68k@vger.kernel.org
Subject: [PATCH 5/10] ide: move ack_intr() method into 'struct ide_port_ops' (take 2)
Date: Sat, 13 Jun 2009 17:31:19 +0400 [thread overview]
Message-ID: <200906131731.19917.sshtylyov@ru.mvista.com> (raw)
In-Reply-To: <200702140101.26639.sshtylyov@ru.mvista.com>
Move the ack_intr() method into 'struct ide_port_ops', also renaming it to
test_irq() while at it...
Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
---
The patch is atop of ide-2.6.git 'for-next' branch.
Changes since previous take:
- added the missed changes to ide-probe.c, falconide.c, and q40ide.c;
- fixed up buddha.c atop of the updated preceding patch;
- fixed error in gayle_init() by adding missed &...
drivers/ide/buddha.c | 15 +++++++++------
drivers/ide/falconide.c | 1 -
drivers/ide/gayle.c | 14 +++++++++-----
drivers/ide/ide-io.c | 3 ++-
drivers/ide/ide-probe.c | 1 -
drivers/ide/macide.c | 12 ++++--------
drivers/ide/q40ide.c | 7 ++-----
include/linux/ide.h | 10 +---------
8 files changed, 27 insertions(+), 36 deletions(-)
Index: ide-2.6/drivers/ide/buddha.c
===================================================================
--- ide-2.6.orig/drivers/ide/buddha.c
+++ ide-2.6/drivers/ide/buddha.c
@@ -99,7 +99,7 @@ static const char *buddha_board_name[] =
* Check and acknowledge the interrupt status
*/
-static int buddha_ack_intr(ide_hwif_t *hwif)
+static int buddha_test_irq(ide_hwif_t *hwif)
{
unsigned char ch;
@@ -118,8 +118,7 @@ static void xsurf_clear_irq(ide_drive_t
}
static void __init buddha_setup_ports(struct ide_hw *hw, unsigned long base,
- unsigned long ctl, unsigned long irq_port,
- ide_ack_intr_t *ack_intr)
+ unsigned long ctl, unsigned long irq_port)
{
int i;
@@ -134,14 +133,19 @@ static void __init buddha_setup_ports(st
hw->io_ports.irq_addr = irq_port;
hw->irq = IRQ_AMIGA_PORTS;
- hw->ack_intr = ack_intr;
}
+static const struct ide_port_ops buddha_port_ops = {
+ .test_irq = buddha_test_irq,
+};
+
static const struct ide_port_ops xsurf_port_ops = {
.clear_irq = xsurf_clear_irq,
+ .test_irq = buddha_test_irq,
};
static const struct ide_port_info buddha_port_info = {
+ .port_ops = &buddha_port_ops,
.host_flags = IDE_HFLAG_MMIO | IDE_HFLAG_NO_DMA,
.irq_flags = IRQF_SHARED,
.chipset = ide_generic,
@@ -217,8 +221,7 @@ fail_base2:
irq_port = buddha_board + xsurf_irqports[i];
}
- buddha_setup_ports(&hw[i], base, ctl, irq_port,
- buddha_ack_intr);
+ buddha_setup_ports(&hw[i], base, ctl, irq_port);
hws[i] = &hw[i];
}
Index: ide-2.6/drivers/ide/falconide.c
===================================================================
--- ide-2.6.orig/drivers/ide/falconide.c
+++ ide-2.6/drivers/ide/falconide.c
@@ -128,7 +128,6 @@ static void __init falconide_setup_ports
hw->io_ports.ctl_addr = ATA_HD_BASE + ATA_HD_CONTROL;
hw->irq = IRQ_MFP_IDE;
- hw->ack_intr = NULL;
}
/*
Index: ide-2.6/drivers/ide/gayle.c
===================================================================
--- ide-2.6.orig/drivers/ide/gayle.c
+++ ide-2.6/drivers/ide/gayle.c
@@ -66,7 +66,7 @@ MODULE_PARM_DESC(doubler, "enable suppor
* Check and acknowledge the interrupt status
*/
-static int gayle_ack_intr(ide_hwif_t *hwif)
+static int gayle_test_irq(ide_hwif_t *hwif)
{
unsigned char ch;
@@ -85,8 +85,7 @@ static void gayle_a1200_clear_irq(ide_dr
}
static void __init gayle_setup_ports(struct ide_hw *hw, unsigned long base,
- unsigned long ctl, unsigned long irq_port,
- ide_ack_intr_t *ack_intr)
+ unsigned long ctl, unsigned long irq_port)
{
int i;
@@ -101,11 +100,15 @@ static void __init gayle_setup_ports(str
hw->io_ports.irq_addr = irq_port;
hw->irq = IRQ_AMIGA_PORTS;
- hw->ack_intr = ack_intr;
}
+static const struct ide_port_ops gayle_a4000_port_ops = {
+ .test_irq = gayle_test_irq,
+};
+
static const struct ide_port_ops gayle_a1200_port_ops = {
.clear_irq = gayle_a1200_clear_irq,
+ .test_irq = gayle_test_irq,
};
static const struct ide_port_info gayle_port_info = {
@@ -148,6 +151,7 @@ found:
if (a4000) {
phys_base = GAYLE_BASE_4000;
irqport = (unsigned long)ZTWO_VADDR(GAYLE_IRQ_4000);
+ d.port_ops = &gayle_a4000_port_ops;
} else {
phys_base = GAYLE_BASE_1200;
irqport = (unsigned long)ZTWO_VADDR(GAYLE_IRQ_1200);
@@ -164,7 +168,7 @@ found:
base = (unsigned long)ZTWO_VADDR(phys_base + i * GAYLE_NEXT_PORT);
ctrlport = GAYLE_HAS_CONTROL_REG ? (base + GAYLE_CONTROL) : 0;
- gayle_setup_ports(&hw[i], base, ctrlport, irqport, gayle_ack_intr);
+ gayle_setup_ports(&hw[i], base, ctrlport, irqport);
hws[i] = &hw[i];
}
Index: ide-2.6/drivers/ide/ide-io.c
===================================================================
--- ide-2.6.orig/drivers/ide/ide-io.c
+++ ide-2.6/drivers/ide/ide-io.c
@@ -789,7 +789,8 @@ irqreturn_t ide_intr (int irq, void *dev
spin_lock_irqsave(&hwif->lock, flags);
- if (hwif->ack_intr && hwif->ack_intr(hwif) == 0)
+ if (hwif->port_ops && hwif->port_ops->test_irq &&
+ hwif->port_ops->test_irq(hwif) == 0)
goto out;
handler = hwif->handler;
Index: ide-2.6/drivers/ide/ide-probe.c
===================================================================
--- ide-2.6.orig/drivers/ide/ide-probe.c
+++ ide-2.6/drivers/ide/ide-probe.c
@@ -1170,7 +1170,6 @@ static void ide_init_port_hw(ide_hwif_t
hwif->irq = hw->irq;
hwif->dev = hw->dev;
hwif->gendev.parent = hw->parent ? hw->parent : hw->dev;
- hwif->ack_intr = hw->ack_intr;
hwif->config_data = hw->config;
}
Index: ide-2.6/drivers/ide/macide.c
===================================================================
--- ide-2.6.orig/drivers/ide/macide.c
+++ ide-2.6/drivers/ide/macide.c
@@ -53,7 +53,7 @@
volatile unsigned char *ide_ifr = (unsigned char *) (IDE_BASE + IDE_IFR);
-int macide_ack_intr(ide_hwif_t* hwif)
+int macide_test_irq(ide_hwif_t *hwif)
{
if (*ide_ifr & 0x20)
return 1;
@@ -66,7 +66,7 @@ static void macide_clear_irq(ide_drive_t
}
static void __init macide_setup_ports(struct ide_hw *hw, unsigned long base,
- int irq, ide_ack_intr_t *ack_intr)
+ int irq)
{
int i;
@@ -78,11 +78,11 @@ static void __init macide_setup_ports(st
hw->io_ports.ctl_addr = base + IDE_CONTROL;
hw->irq = irq;
- hw->ack_intr = ack_intr;
}
static const struct ide_port_ops macide_port_ops = {
.clear_irq = macide_clear_irq,
+ .test_irq = macide_test_irq,
};
static const struct ide_port_info macide_port_info = {
@@ -101,7 +101,6 @@ static const char *mac_ide_name[] =
static int __init macide_init(void)
{
- ide_ack_intr_t *ack_intr;
unsigned long base;
int irq;
struct ide_hw hw, *hws[] = { &hw };
@@ -113,17 +112,14 @@ static int __init macide_init(void)
switch (macintosh_config->ide_type) {
case MAC_IDE_QUADRA:
base = IDE_BASE;
- ack_intr = macide_ack_intr;
irq = IRQ_NUBUS_F;
break;
case MAC_IDE_PB:
base = IDE_BASE;
- ack_intr = macide_ack_intr;
irq = IRQ_NUBUS_C;
break;
case MAC_IDE_BABOON:
base = BABOON_BASE;
- ack_intr = NULL;
d.port_ops = NULL;
irq = IRQ_BABOON_1;
break;
@@ -134,7 +130,7 @@ static int __init macide_init(void)
printk(KERN_INFO "ide: Macintosh %s IDE controller\n",
mac_ide_name[macintosh_config->ide_type - 1]);
- macide_setup_ports(&hw, base, irq, ack_intr);
+ macide_setup_ports(&hw, base, irq);
return ide_host_add(&d, hws, 1, NULL);
}
Index: ide-2.6/drivers/ide/q40ide.c
===================================================================
--- ide-2.6.orig/drivers/ide/q40ide.c
+++ ide-2.6/drivers/ide/q40ide.c
@@ -51,9 +51,7 @@ static int q40ide_default_irq(unsigned l
/*
* Addresses are pretranslated for Q40 ISA access.
*/
-static void q40_ide_setup_ports(struct ide_hw *hw, unsigned long base,
- ide_ack_intr_t *ack_intr,
- int irq)
+static void q40_ide_setup_ports(struct ide_hw *hw, unsigned long base, int irq)
{
memset(hw, 0, sizeof(*hw));
/* BIG FAT WARNING:
@@ -69,7 +67,6 @@ static void q40_ide_setup_ports(struct i
hw->io_ports.ctl_addr = Q40_ISA_IO_B(base + 0x206);
hw->irq = irq;
- hw->ack_intr = ack_intr;
}
static void q40ide_input_data(ide_drive_t *drive, struct ide_cmd *cmd,
@@ -156,7 +153,7 @@ static int __init q40ide_init(void)
release_region(pcide_bases[i], 8);
continue;
}
- q40_ide_setup_ports(&hw[i], pcide_bases[i], NULL,
+ q40_ide_setup_ports(&hw[i], pcide_bases[i],
q40ide_default_irq(pcide_bases[i]));
hws[i] = &hw[i];
Index: ide-2.6/include/linux/ide.h
===================================================================
--- ide-2.6.orig/include/linux/ide.h
+++ ide-2.6/include/linux/ide.h
@@ -157,12 +157,6 @@ enum {
#define REQ_UNPARK_HEADS 0x23
/*
- * Check for an interrupt and acknowledge the interrupt status
- */
-struct hwif_s;
-typedef int (ide_ack_intr_t)(struct hwif_s *);
-
-/*
* hwif_chipset_t is used to keep track of the specific hardware
* chipset used by each IDE interface, if known.
*/
@@ -185,7 +179,6 @@ struct ide_hw {
};
int irq; /* our irq number */
- ide_ack_intr_t *ack_intr; /* acknowledge interrupt */
struct device *dev, *parent;
unsigned long config;
};
@@ -649,6 +642,7 @@ struct ide_port_ops {
void (*maskproc)(ide_drive_t *, int);
void (*quirkproc)(ide_drive_t *);
void (*clear_irq)(ide_drive_t *);
+ int (*test_irq)(struct hwif_s *);
u8 (*mdma_filter)(ide_drive_t *);
u8 (*udma_filter)(ide_drive_t *);
@@ -708,8 +702,6 @@ typedef struct hwif_s {
struct device *dev;
- ide_ack_intr_t *ack_intr;
-
void (*rw_disk)(ide_drive_t *, struct request *);
const struct ide_tp_ops *tp_ops;
next prev parent reply other threads:[~2009-06-13 13:29 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <200702140101.26639.sshtylyov@ru.mvista.com>
2009-06-13 13:31 ` [PATCH 4/10] ide: move IRQ clearing from ack_intr() method to clear_irq() method (take 2) Sergei Shtylyov
2009-06-13 13:31 ` Sergei Shtylyov [this message]
2009-06-13 16:15 ` [PATCH 5/10] ide: move ack_intr() method into 'struct ide_port_ops' " Finn Thain
2009-06-14 3:37 ` Finn Thain
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200906131731.19917.sshtylyov@ru.mvista.com \
--to=sshtylyov@ru.mvista.com \
--cc=bzolnier@gmail.com \
--cc=linux-ide@vger.kernel.org \
--cc=linux-m68k@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox