From: Antti Palosaari <crope@iki.fi>
To: linux-media@vger.kernel.org
Cc: Nibble Max <nibble.max@gmail.com>,
Olli Salonen <olli.salonen@iki.fi>,
Evgeny Plehov <EvgenyPlehov@ukr.net>,
Antti Palosaari <crope@iki.fi>
Subject: [GIT PULL FINAL 15/21] m88ts2022: fix coding style issues
Date: Fri, 22 Aug 2014 13:58:07 +0300 [thread overview]
Message-ID: <1408705093-5167-16-git-send-email-crope@iki.fi> (raw)
In-Reply-To: <1408705093-5167-1-git-send-email-crope@iki.fi>
Fix coding style issues pointed out by checkpatch.pl.
Signed-off-by: Antti Palosaari <crope@iki.fi>
---
drivers/media/tuners/m88ts2022.c | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/drivers/media/tuners/m88ts2022.c b/drivers/media/tuners/m88ts2022.c
index 7a62097..f51b107 100644
--- a/drivers/media/tuners/m88ts2022.c
+++ b/drivers/media/tuners/m88ts2022.c
@@ -176,6 +176,7 @@ static int m88ts2022_set_params(struct dvb_frontend *fe)
unsigned int f_ref_khz, f_vco_khz, div_ref, div_out, pll_n, gdiv28;
u8 buf[3], u8tmp, cap_code, lpf_gm, lpf_mxdiv, div_max, div_min;
u16 u16tmp;
+
dev_dbg(&priv->client->dev,
"%s: frequency=%d symbol_rate=%d rolloff=%d\n",
__func__, c->frequency, c->symbol_rate, c->rolloff);
@@ -393,6 +394,7 @@ static int m88ts2022_init(struct dvb_frontend *fe)
{0x24, 0x02},
{0x12, 0xa0},
};
+
dev_dbg(&priv->client->dev, "%s:\n", __func__);
ret = m88ts2022_wr_reg(priv, 0x00, 0x01);
@@ -448,6 +450,7 @@ static int m88ts2022_sleep(struct dvb_frontend *fe)
{
struct m88ts2022_priv *priv = fe->tuner_priv;
int ret;
+
dev_dbg(&priv->client->dev, "%s:\n", __func__);
ret = m88ts2022_wr_reg(priv, 0x00, 0x00);
@@ -462,6 +465,7 @@ err:
static int m88ts2022_get_frequency(struct dvb_frontend *fe, u32 *frequency)
{
struct m88ts2022_priv *priv = fe->tuner_priv;
+
dev_dbg(&priv->client->dev, "%s:\n", __func__);
*frequency = priv->frequency_khz;
@@ -471,6 +475,7 @@ static int m88ts2022_get_frequency(struct dvb_frontend *fe, u32 *frequency)
static int m88ts2022_get_if_frequency(struct dvb_frontend *fe, u32 *frequency)
{
struct m88ts2022_priv *priv = fe->tuner_priv;
+
dev_dbg(&priv->client->dev, "%s:\n", __func__);
*frequency = 0; /* Zero-IF */
@@ -642,6 +647,7 @@ static int m88ts2022_remove(struct i2c_client *client)
{
struct m88ts2022_priv *priv = i2c_get_clientdata(client);
struct dvb_frontend *fe = priv->cfg.fe;
+
dev_dbg(&client->dev, "%s:\n", __func__);
memset(&fe->ops.tuner_ops, 0, sizeof(struct dvb_tuner_ops));
--
http://palosaari.fi/
next prev parent reply other threads:[~2014-08-22 10:58 UTC|newest]
Thread overview: 34+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-08-22 10:57 [GIT PULL FINAL 00/21] misc DTV stuff for 3.18 Antti Palosaari
2014-08-22 10:57 ` [GIT PULL FINAL 01/21] si2168: clean logging Antti Palosaari
2014-08-22 11:47 ` Mauro Carvalho Chehab
2014-08-22 12:13 ` Antti Palosaari
2014-08-22 12:28 ` Mauro Carvalho Chehab
2014-08-22 12:50 ` Antti Palosaari
2014-08-22 13:41 ` Mauro Carvalho Chehab
2014-08-22 10:57 ` [GIT PULL FINAL 02/21] si2157: " Antti Palosaari
2014-08-22 10:57 ` [GIT PULL FINAL 03/21] m88ds3103: implement set voltage and TS clock Antti Palosaari
2014-08-22 10:57 ` [GIT PULL FINAL 04/21] si2168: add ts_mode setting and move to si2168_init Antti Palosaari
2014-08-22 10:57 ` [GIT PULL FINAL 05/21] em28xx: add ts mode setting for PCTV 292e Antti Palosaari
2014-08-22 10:57 ` [GIT PULL FINAL 06/21] cxusb: add ts mode setting for TechnoTrend CT2-4400 Antti Palosaari
2014-08-22 10:57 ` [GIT PULL FINAL 07/21] sp2: Add I2C driver for CIMaX SP2 common interface module Antti Palosaari
2014-08-22 10:58 ` [GIT PULL FINAL 08/21] cxusb: Add support for TechnoTrend TT-connect CT2-4650 CI Antti Palosaari
2014-08-22 10:58 ` [GIT PULL FINAL 09/21] cxusb: Add read_mac_address for TT CT2-4400 and CT2-4650 Antti Palosaari
2014-08-22 10:58 ` [GIT PULL FINAL 10/21] si2168: DVB-T2 PLP selection implemented Antti Palosaari
2014-08-22 10:58 ` [GIT PULL FINAL 11/21] si2157: Add support for delivery system SYS_ATSC Antti Palosaari
2014-08-22 10:58 ` [GIT PULL FINAL 12/21] dvb-usb-v2: remove dvb_usb_device NULL check Antti Palosaari
2014-08-22 10:58 ` [GIT PULL FINAL 13/21] msi2500: remove unneeded local pointer on msi2500_isoc_init() Antti Palosaari
2014-08-22 10:58 ` [GIT PULL FINAL 14/21] m88ts2022: fix 32bit overflow on filter calc Antti Palosaari
2014-08-22 10:58 ` Antti Palosaari [this message]
2014-08-22 10:58 ` [GIT PULL FINAL 16/21] m88ts2022: rename device state (priv => s) Antti Palosaari
2014-09-02 18:51 ` Mauro Carvalho Chehab
2014-09-03 2:26 ` Antti Palosaari
2014-09-03 10:38 ` Mauro Carvalho Chehab
2014-09-03 10:50 ` Antti Palosaari
2014-09-03 11:47 ` Mauro Carvalho Chehab
2014-08-22 10:58 ` [GIT PULL FINAL 17/21] m88ts2022: clean up logging Antti Palosaari
2014-08-22 10:58 ` [GIT PULL FINAL 18/21] m88ts2022: convert to RegMap I2C API Antti Palosaari
2014-08-22 10:58 ` [GIT PULL FINAL 19/21] m88ts2022: change parameter type of m88ts2022_cmd Antti Palosaari
2014-08-22 10:58 ` [GIT PULL FINAL 20/21] m88ds3103: change .set_voltage() implementation Antti Palosaari
2014-08-22 10:58 ` [GIT PULL FINAL 21/21] m88ds3103: fix coding style issues Antti Palosaari
2014-08-22 11:08 ` [GIT PULL FINAL 00/21] misc DTV stuff for 3.18 Antti Palosaari
2014-09-02 18:59 ` Mauro Carvalho Chehab
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1408705093-5167-16-git-send-email-crope@iki.fi \
--to=crope@iki.fi \
--cc=EvgenyPlehov@ukr.net \
--cc=linux-media@vger.kernel.org \
--cc=nibble.max@gmail.com \
--cc=olli.salonen@iki.fi \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox