From: Antti Palosaari <crope@iki.fi>
To: linux-media@vger.kernel.org
Cc: Nibble Max <nibble.max@gmail.com>,
Olli Salonen <olli.salonen@iki.fi>,
Evgeny Plehov <EvgenyPlehov@ukr.net>,
Antti Palosaari <crope@iki.fi>
Subject: [GIT PULL FINAL 02/21] si2157: clean logging
Date: Fri, 22 Aug 2014 13:57:54 +0300 [thread overview]
Message-ID: <1408705093-5167-3-git-send-email-crope@iki.fi> (raw)
In-Reply-To: <1408705093-5167-1-git-send-email-crope@iki.fi>
From: Olli Salonen <olli.salonen@iki.fi>
Same thing for si2157 as Antti did earlier for tda18212:
There is no need to print module name nor function name as those
are done by kernel logging system when dev_xxx logging is used and
driver is proper I2C driver.
While here, fix a typo ("unknown") in si2157_init.
Signed-off-by: Olli Salonen <olli.salonen@iki.fi>
Reviewed-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Antti Palosaari <crope@iki.fi>
---
drivers/media/tuners/si2157.c | 52 +++++++++++++++++++++----------------------
1 file changed, 25 insertions(+), 27 deletions(-)
diff --git a/drivers/media/tuners/si2157.c b/drivers/media/tuners/si2157.c
index 6c53edb..2281b7d 100644
--- a/drivers/media/tuners/si2157.c
+++ b/drivers/media/tuners/si2157.c
@@ -55,8 +55,7 @@ static int si2157_cmd_execute(struct si2157 *s, struct si2157_cmd *cmd)
break;
}
- dev_dbg(&s->client->dev, "%s: cmd execution took %d ms\n",
- __func__,
+ dev_dbg(&s->client->dev, "cmd execution took %d ms\n",
jiffies_to_msecs(jiffies) -
(jiffies_to_msecs(timeout) - TIMEOUT));
@@ -75,7 +74,7 @@ err_mutex_unlock:
return 0;
err:
- dev_dbg(&s->client->dev, "%s: failed=%d\n", __func__, ret);
+ dev_dbg(&s->client->dev, "failed=%d\n", ret);
return ret;
}
@@ -88,7 +87,7 @@ static int si2157_init(struct dvb_frontend *fe)
u8 *fw_file;
unsigned int chip_id;
- dev_dbg(&s->client->dev, "%s:\n", __func__);
+ dev_dbg(&s->client->dev, "\n");
/* configure? */
memcpy(cmd.args, "\xc0\x00\x0c\x00\x00\x01\x01\x01\x01\x01\x01\x02\x00\x00\x01", 15);
@@ -121,35 +120,35 @@ static int si2157_init(struct dvb_frontend *fe)
break;
default:
dev_err(&s->client->dev,
- "%s: unkown chip version Si21%d-%c%c%c\n",
- KBUILD_MODNAME, cmd.args[2], cmd.args[1],
+ "unknown chip version Si21%d-%c%c%c\n",
+ cmd.args[2], cmd.args[1],
cmd.args[3], cmd.args[4]);
ret = -EINVAL;
goto err;
}
/* cold state - try to download firmware */
- dev_info(&s->client->dev, "%s: found a '%s' in cold state\n",
- KBUILD_MODNAME, si2157_ops.info.name);
+ dev_info(&s->client->dev, "found a '%s' in cold state\n",
+ si2157_ops.info.name);
/* request the firmware, this will block and timeout */
ret = request_firmware(&fw, fw_file, &s->client->dev);
if (ret) {
- dev_err(&s->client->dev, "%s: firmware file '%s' not found\n",
- KBUILD_MODNAME, fw_file);
+ dev_err(&s->client->dev, "firmware file '%s' not found\n",
+ fw_file);
goto err;
}
/* firmware should be n chunks of 17 bytes */
if (fw->size % 17 != 0) {
- dev_err(&s->client->dev, "%s: firmware file '%s' is invalid\n",
- KBUILD_MODNAME, fw_file);
+ dev_err(&s->client->dev, "firmware file '%s' is invalid\n",
+ fw_file);
ret = -EINVAL;
goto err;
}
- dev_info(&s->client->dev, "%s: downloading firmware from file '%s'\n",
- KBUILD_MODNAME, fw_file);
+ dev_info(&s->client->dev, "downloading firmware from file '%s'\n",
+ fw_file);
for (remaining = fw->size; remaining > 0; remaining -= 17) {
len = fw->data[fw->size - remaining];
@@ -159,8 +158,8 @@ static int si2157_init(struct dvb_frontend *fe)
ret = si2157_cmd_execute(s, &cmd);
if (ret) {
dev_err(&s->client->dev,
- "%s: firmware download failed=%d\n",
- KBUILD_MODNAME, ret);
+ "firmware download failed=%d\n",
+ ret);
goto err;
}
}
@@ -184,7 +183,7 @@ err:
if (fw)
release_firmware(fw);
- dev_dbg(&s->client->dev, "%s: failed=%d\n", __func__, ret);
+ dev_dbg(&s->client->dev, "failed=%d\n", ret);
return ret;
}
@@ -194,7 +193,7 @@ static int si2157_sleep(struct dvb_frontend *fe)
int ret;
struct si2157_cmd cmd;
- dev_dbg(&s->client->dev, "%s:\n", __func__);
+ dev_dbg(&s->client->dev, "\n");
s->active = false;
@@ -207,7 +206,7 @@ static int si2157_sleep(struct dvb_frontend *fe)
return 0;
err:
- dev_dbg(&s->client->dev, "%s: failed=%d\n", __func__, ret);
+ dev_dbg(&s->client->dev, "failed=%d\n", ret);
return ret;
}
@@ -220,8 +219,8 @@ static int si2157_set_params(struct dvb_frontend *fe)
u8 bandwidth, delivery_system;
dev_dbg(&s->client->dev,
- "%s: delivery_system=%d frequency=%u bandwidth_hz=%u\n",
- __func__, c->delivery_system, c->frequency,
+ "delivery_system=%d frequency=%u bandwidth_hz=%u\n",
+ c->delivery_system, c->frequency,
c->bandwidth_hz);
if (!s->active) {
@@ -275,7 +274,7 @@ static int si2157_set_params(struct dvb_frontend *fe)
return 0;
err:
- dev_dbg(&s->client->dev, "%s: failed=%d\n", __func__, ret);
+ dev_dbg(&s->client->dev, "failed=%d\n", ret);
return ret;
}
@@ -310,7 +309,7 @@ static int si2157_probe(struct i2c_client *client,
s = kzalloc(sizeof(struct si2157), GFP_KERNEL);
if (!s) {
ret = -ENOMEM;
- dev_err(&client->dev, "%s: kzalloc() failed\n", KBUILD_MODNAME);
+ dev_err(&client->dev, "kzalloc() failed\n");
goto err;
}
@@ -333,11 +332,10 @@ static int si2157_probe(struct i2c_client *client,
i2c_set_clientdata(client, s);
dev_info(&s->client->dev,
- "%s: Silicon Labs Si2157/Si2158 successfully attached\n",
- KBUILD_MODNAME);
+ "Silicon Labs Si2157/Si2158 successfully attached\n");
return 0;
err:
- dev_dbg(&client->dev, "%s: failed=%d\n", __func__, ret);
+ dev_dbg(&client->dev, "failed=%d\n", ret);
kfree(s);
return ret;
@@ -348,7 +346,7 @@ static int si2157_remove(struct i2c_client *client)
struct si2157 *s = i2c_get_clientdata(client);
struct dvb_frontend *fe = s->fe;
- dev_dbg(&client->dev, "%s:\n", __func__);
+ dev_dbg(&client->dev, "\n");
memset(&fe->ops.tuner_ops, 0, sizeof(struct dvb_tuner_ops));
fe->tuner_priv = NULL;
--
http://palosaari.fi/
next prev parent reply other threads:[~2014-08-22 10:58 UTC|newest]
Thread overview: 34+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-08-22 10:57 [GIT PULL FINAL 00/21] misc DTV stuff for 3.18 Antti Palosaari
2014-08-22 10:57 ` [GIT PULL FINAL 01/21] si2168: clean logging Antti Palosaari
2014-08-22 11:47 ` Mauro Carvalho Chehab
2014-08-22 12:13 ` Antti Palosaari
2014-08-22 12:28 ` Mauro Carvalho Chehab
2014-08-22 12:50 ` Antti Palosaari
2014-08-22 13:41 ` Mauro Carvalho Chehab
2014-08-22 10:57 ` Antti Palosaari [this message]
2014-08-22 10:57 ` [GIT PULL FINAL 03/21] m88ds3103: implement set voltage and TS clock Antti Palosaari
2014-08-22 10:57 ` [GIT PULL FINAL 04/21] si2168: add ts_mode setting and move to si2168_init Antti Palosaari
2014-08-22 10:57 ` [GIT PULL FINAL 05/21] em28xx: add ts mode setting for PCTV 292e Antti Palosaari
2014-08-22 10:57 ` [GIT PULL FINAL 06/21] cxusb: add ts mode setting for TechnoTrend CT2-4400 Antti Palosaari
2014-08-22 10:57 ` [GIT PULL FINAL 07/21] sp2: Add I2C driver for CIMaX SP2 common interface module Antti Palosaari
2014-08-22 10:58 ` [GIT PULL FINAL 08/21] cxusb: Add support for TechnoTrend TT-connect CT2-4650 CI Antti Palosaari
2014-08-22 10:58 ` [GIT PULL FINAL 09/21] cxusb: Add read_mac_address for TT CT2-4400 and CT2-4650 Antti Palosaari
2014-08-22 10:58 ` [GIT PULL FINAL 10/21] si2168: DVB-T2 PLP selection implemented Antti Palosaari
2014-08-22 10:58 ` [GIT PULL FINAL 11/21] si2157: Add support for delivery system SYS_ATSC Antti Palosaari
2014-08-22 10:58 ` [GIT PULL FINAL 12/21] dvb-usb-v2: remove dvb_usb_device NULL check Antti Palosaari
2014-08-22 10:58 ` [GIT PULL FINAL 13/21] msi2500: remove unneeded local pointer on msi2500_isoc_init() Antti Palosaari
2014-08-22 10:58 ` [GIT PULL FINAL 14/21] m88ts2022: fix 32bit overflow on filter calc Antti Palosaari
2014-08-22 10:58 ` [GIT PULL FINAL 15/21] m88ts2022: fix coding style issues Antti Palosaari
2014-08-22 10:58 ` [GIT PULL FINAL 16/21] m88ts2022: rename device state (priv => s) Antti Palosaari
2014-09-02 18:51 ` Mauro Carvalho Chehab
2014-09-03 2:26 ` Antti Palosaari
2014-09-03 10:38 ` Mauro Carvalho Chehab
2014-09-03 10:50 ` Antti Palosaari
2014-09-03 11:47 ` Mauro Carvalho Chehab
2014-08-22 10:58 ` [GIT PULL FINAL 17/21] m88ts2022: clean up logging Antti Palosaari
2014-08-22 10:58 ` [GIT PULL FINAL 18/21] m88ts2022: convert to RegMap I2C API Antti Palosaari
2014-08-22 10:58 ` [GIT PULL FINAL 19/21] m88ts2022: change parameter type of m88ts2022_cmd Antti Palosaari
2014-08-22 10:58 ` [GIT PULL FINAL 20/21] m88ds3103: change .set_voltage() implementation Antti Palosaari
2014-08-22 10:58 ` [GIT PULL FINAL 21/21] m88ds3103: fix coding style issues Antti Palosaari
2014-08-22 11:08 ` [GIT PULL FINAL 00/21] misc DTV stuff for 3.18 Antti Palosaari
2014-09-02 18:59 ` Mauro Carvalho Chehab
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1408705093-5167-3-git-send-email-crope@iki.fi \
--to=crope@iki.fi \
--cc=EvgenyPlehov@ukr.net \
--cc=linux-media@vger.kernel.org \
--cc=nibble.max@gmail.com \
--cc=olli.salonen@iki.fi \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox