Re: cannot make this Asus my cinema-u3100miniplusv2 work under linux

[Renato Gallo <renatogallo@unixproducts.com>]

i found it is a problem with kaffeine, with other programs i can lock a 
signal but reception is very very sketchy (like in unviewable).

GlovX xine-lib # dmesg |grep e4000
GlovX xine-lib # dmesg |grep FC0012
GlovX xine-lib # dmesg |grep FC0013
[   28.281685] fc0013: Fitipower FC0013 successfully attached.
GlovX xine-lib # dmesg |grep FC2580
GlovX xine-lib # dmesg |grep TUA
GlovX xine-lib #


Il 16/12/2012 18:55 Antti Palosaari ha scritto:
> On 12/16/2012 07:15 PM, Renato Gallo wrote:
>> now the modules loads and kaffeine recognizes the device but i 
>> cannot
>> find any channels.
>> can it be a tuner bug ?
>
> I think it is bad antenna / weak signal. Try w_scan, scan, tzap.
>
> Could you say which RF-tuner it finds from your device? use dmesg to
> dump output. It could be for example e4000, FC0012, FC0013, FC2580,
> TUA9001 etc.
>
> Antti
>
>>
>>
>> kaffeine(5978) DvbDevice::frontendEvent: tuning failed
>> kaffeine(5978) DvbScanFilter::timerEvent: timeout while reading 
>> section;
>> type = 0 pid = 0
>> kaffeine(5978) DvbScanFilter::timerEvent: timeout while reading 
>> section;
>> type = 2 pid = 17
>> kaffeine(5978) DvbScanFilter::timerEvent: timeout while reading 
>> section;
>> type = 4 pid = 16
>> kaffeine(5978) DvbDevice::frontendEvent: tuning failed
>> kaffeine(5978) DvbScanFilter::timerEvent: timeout while reading 
>> section;
>> type = 0 pid = 0
>> kaffeine(5978) DvbScanFilter::timerEvent: timeout while reading 
>> section;
>> type = 2 pid = 17
>> kaffeine(5978) DvbScanFilter::timerEvent: timeout while reading 
>> section;
>> type = 4 pid = 16
>> kaffeine(5978) DvbDevice::frontendEvent: tuning failed
>>
>>
>> Il 16/12/2012 15:50 Antti Palosaari ha scritto:
>>> On 12/16/2012 04:23 PM, Renato Gallo wrote:
>>>> any news on this ?
>>>>
>>>>
>>>>
>>>>
>>>>
>>>> Asus my cinema-u3100miniplusv2
>>>>
>>>> Bus 001 Device 015: ID 1b80:d3a8 Afatech
>>>>
>>>> [ 6956.333440] usb 1-6.3.6: new high-speed USB device number 16 
>>>> using
>>>> ehci_hcd
>>>> [ 6956.453943] usb 1-6.3.6: New USB device found, idVendor=1b80,
>>>> idProduct=d3a8
>>>> [ 6956.453950] usb 1-6.3.6: New USB device strings: Mfr=1, 
>>>> Product=2,
>>>> SerialNumber=0
>>>> [ 6956.453955] usb 1-6.3.6: Product: Rtl2832UDVB
>>>> [ 6956.453959] usb 1-6.3.6: Manufacturer: Realtek
>>>>
>>>
>>> Seems to be Realtek RTL2832U. Add that USB ID to the driver and 
>>> test.
>>> It is very high probability it starts working.
>>>
>>> Here is the patch:
>>>
>>> 
>>> http://git.linuxtv.org/anttip/media_tree.git/shortlog/refs/heads/rtl28xxu-usb-ids
>>>
>>>
>>> Please test and report.
>>>
>>> regards
>>> Antti
>>
>> --
>> To unsubscribe from this list: send the line "unsubscribe 
>> linux-media" in
>> the body of a message to majordomo@vger.kernel.org
>> More majordomo info at  http://vger.kernel.org/majordomo-info.html