From: Antti Palosaari <crope@iki.fi>
To: Renato Gallo <renatogallo@unixproducts.com>
Cc: linux-media@vger.kernel.org
Subject: Re: cannot make this Asus my cinema-u3100miniplusv2 work under linux
Date: Sun, 16 Dec 2012 22:34:56 +0200 [thread overview]
Message-ID: <50CE3070.10309@iki.fi> (raw)
In-Reply-To: <1af6a5408ee3ebccebc3885bba06fc69@unixproducts.com>
It is very likely weak signal issue as I said. What kind of antenna you
are using?
Antti
On 12/16/2012 10:13 PM, Renato Gallo wrote:
> i found it is a problem with kaffeine, with other programs i can lock a
> signal but reception is very very sketchy (like in unviewable).
>
> GlovX xine-lib # dmesg |grep e4000
> GlovX xine-lib # dmesg |grep FC0012
> GlovX xine-lib # dmesg |grep FC0013
> [ 28.281685] fc0013: Fitipower FC0013 successfully attached.
> GlovX xine-lib # dmesg |grep FC2580
> GlovX xine-lib # dmesg |grep TUA
> GlovX xine-lib #
>
>
> Il 16/12/2012 18:55 Antti Palosaari ha scritto:
>> On 12/16/2012 07:15 PM, Renato Gallo wrote:
>>> now the modules loads and kaffeine recognizes the device but i cannot
>>> find any channels.
>>> can it be a tuner bug ?
>>
>> I think it is bad antenna / weak signal. Try w_scan, scan, tzap.
>>
>> Could you say which RF-tuner it finds from your device? use dmesg to
>> dump output. It could be for example e4000, FC0012, FC0013, FC2580,
>> TUA9001 etc.
>>
>> Antti
>>
>>>
>>>
>>> kaffeine(5978) DvbDevice::frontendEvent: tuning failed
>>> kaffeine(5978) DvbScanFilter::timerEvent: timeout while reading section;
>>> type = 0 pid = 0
>>> kaffeine(5978) DvbScanFilter::timerEvent: timeout while reading section;
>>> type = 2 pid = 17
>>> kaffeine(5978) DvbScanFilter::timerEvent: timeout while reading section;
>>> type = 4 pid = 16
>>> kaffeine(5978) DvbDevice::frontendEvent: tuning failed
>>> kaffeine(5978) DvbScanFilter::timerEvent: timeout while reading section;
>>> type = 0 pid = 0
>>> kaffeine(5978) DvbScanFilter::timerEvent: timeout while reading section;
>>> type = 2 pid = 17
>>> kaffeine(5978) DvbScanFilter::timerEvent: timeout while reading section;
>>> type = 4 pid = 16
>>> kaffeine(5978) DvbDevice::frontendEvent: tuning failed
>>>
>>>
>>> Il 16/12/2012 15:50 Antti Palosaari ha scritto:
>>>> On 12/16/2012 04:23 PM, Renato Gallo wrote:
>>>>> any news on this ?
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>> Asus my cinema-u3100miniplusv2
>>>>>
>>>>> Bus 001 Device 015: ID 1b80:d3a8 Afatech
>>>>>
>>>>> [ 6956.333440] usb 1-6.3.6: new high-speed USB device number 16 using
>>>>> ehci_hcd
>>>>> [ 6956.453943] usb 1-6.3.6: New USB device found, idVendor=1b80,
>>>>> idProduct=d3a8
>>>>> [ 6956.453950] usb 1-6.3.6: New USB device strings: Mfr=1, Product=2,
>>>>> SerialNumber=0
>>>>> [ 6956.453955] usb 1-6.3.6: Product: Rtl2832UDVB
>>>>> [ 6956.453959] usb 1-6.3.6: Manufacturer: Realtek
>>>>>
>>>>
>>>> Seems to be Realtek RTL2832U. Add that USB ID to the driver and test.
>>>> It is very high probability it starts working.
>>>>
>>>> Here is the patch:
>>>>
>>>>
>>>> http://git.linuxtv.org/anttip/media_tree.git/shortlog/refs/heads/rtl28xxu-usb-ids
>>>>
>>>>
>>>>
>>>> Please test and report.
>>>>
>>>> regards
>>>> Antti
>>>
>>> --
>>> To unsubscribe from this list: send the line "unsubscribe
>>> linux-media" in
>>> the body of a message to majordomo@vger.kernel.org
>>> More majordomo info at http://vger.kernel.org/majordomo-info.html
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-media" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
--
http://palosaari.fi/
next prev parent reply other threads:[~2012-12-16 20:35 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-12-16 14:23 cannot make this Asus my cinema-u3100miniplusv2 work under linux Renato Gallo
2012-12-16 14:50 ` Antti Palosaari
2012-12-16 17:15 ` Renato Gallo
2012-12-16 17:55 ` Antti Palosaari
2012-12-16 20:13 ` Renato Gallo
2012-12-16 20:34 ` Antti Palosaari [this message]
2012-12-16 21:16 ` Renato Gallo
2012-12-16 21:22 ` Antti Palosaari
2012-12-16 21:26 ` Renato Gallo
2012-12-17 19:57 ` Renato Gallo
2012-12-17 21:45 ` Luca Olivetti
2012-12-17 22:32 ` Renato Gallo
2012-12-31 20:09 ` Antti Palosaari
2013-01-02 2:19 ` Renato Gallo
2013-01-03 15:19 ` Oliver Schinagl
2012-12-16 22:32 ` Antonio Ospite
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=50CE3070.10309@iki.fi \
--to=crope@iki.fi \
--cc=linux-media@vger.kernel.org \
--cc=renatogallo@unixproducts.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox