From: Renato Gallo <renatogallo@unixproducts.com>
To: <linux-media@vger.kernel.org>
Subject: Re: cannot make this Asus my cinema-u3100miniplusv2 work under linux
Date: Sun, 16 Dec 2012 22:26:58 +0100 [thread overview]
Message-ID: <d6185b9c5a69b273609bce494f0302b1@unixproducts.com> (raw)
In-Reply-To: <50CE3BA0.5030503@iki.fi>
I will be honored if my name will be added as reporter, thanks for your
kind and fast advice. I have ordered another portable (30 db) antenna
and will talk about that in a future reply to this thread :)
Il 16/12/2012 22:22 Antti Palosaari ha scritto:
> That antenna is your problem.
>
> I will send that patch to the Kernel 3.8, but as I think it is maybe
> too late for 3.8 it will eventually go to the 3.9 which is out
> sometime near beginning of next summer.
>
> If you wish I add your name as reporter then reply. Otherwise case
> closed. Feedback from the better antenna could be nice too.
>
>
> Antti
>
>
> On 12/16/2012 11:16 PM, Renato Gallo wrote:
>> stock one that came with the device
>>
>> http://unixproducts.com/antenna.jpg
>>
>>
>> Il 16/12/2012 21:34 Antti Palosaari ha scritto:
>>> It is very likely weak signal issue as I said. What kind of antenna
>>> you are using?
>>>
>>> Antti
>>>
>>>
>>> On 12/16/2012 10:13 PM, Renato Gallo wrote:
>>>> i found it is a problem with kaffeine, with other programs i can
>>>> lock a
>>>> signal but reception is very very sketchy (like in unviewable).
>>>>
>>>> GlovX xine-lib # dmesg |grep e4000
>>>> GlovX xine-lib # dmesg |grep FC0012
>>>> GlovX xine-lib # dmesg |grep FC0013
>>>> [ 28.281685] fc0013: Fitipower FC0013 successfully attached.
>>>> GlovX xine-lib # dmesg |grep FC2580
>>>> GlovX xine-lib # dmesg |grep TUA
>>>> GlovX xine-lib #
>>>>
>>>>
>>>> Il 16/12/2012 18:55 Antti Palosaari ha scritto:
>>>>> On 12/16/2012 07:15 PM, Renato Gallo wrote:
>>>>>> now the modules loads and kaffeine recognizes the device but i
>>>>>> cannot
>>>>>> find any channels.
>>>>>> can it be a tuner bug ?
>>>>>
>>>>> I think it is bad antenna / weak signal. Try w_scan, scan, tzap.
>>>>>
>>>>> Could you say which RF-tuner it finds from your device? use dmesg
>>>>> to
>>>>> dump output. It could be for example e4000, FC0012, FC0013,
>>>>> FC2580,
>>>>> TUA9001 etc.
>>>>>
>>>>> Antti
>>>>>
>>>>>>
>>>>>>
>>>>>> kaffeine(5978) DvbDevice::frontendEvent: tuning failed
>>>>>> kaffeine(5978) DvbScanFilter::timerEvent: timeout while reading
>>>>>> section;
>>>>>> type = 0 pid = 0
>>>>>> kaffeine(5978) DvbScanFilter::timerEvent: timeout while reading
>>>>>> section;
>>>>>> type = 2 pid = 17
>>>>>> kaffeine(5978) DvbScanFilter::timerEvent: timeout while reading
>>>>>> section;
>>>>>> type = 4 pid = 16
>>>>>> kaffeine(5978) DvbDevice::frontendEvent: tuning failed
>>>>>> kaffeine(5978) DvbScanFilter::timerEvent: timeout while reading
>>>>>> section;
>>>>>> type = 0 pid = 0
>>>>>> kaffeine(5978) DvbScanFilter::timerEvent: timeout while reading
>>>>>> section;
>>>>>> type = 2 pid = 17
>>>>>> kaffeine(5978) DvbScanFilter::timerEvent: timeout while reading
>>>>>> section;
>>>>>> type = 4 pid = 16
>>>>>> kaffeine(5978) DvbDevice::frontendEvent: tuning failed
>>>>>>
>>>>>>
>>>>>> Il 16/12/2012 15:50 Antti Palosaari ha scritto:
>>>>>>> On 12/16/2012 04:23 PM, Renato Gallo wrote:
>>>>>>>> any news on this ?
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>> Asus my cinema-u3100miniplusv2
>>>>>>>>
>>>>>>>> Bus 001 Device 015: ID 1b80:d3a8 Afatech
>>>>>>>>
>>>>>>>> [ 6956.333440] usb 1-6.3.6: new high-speed USB device number
>>>>>>>> 16
>>>>>>>> using
>>>>>>>> ehci_hcd
>>>>>>>> [ 6956.453943] usb 1-6.3.6: New USB device found,
>>>>>>>> idVendor=1b80,
>>>>>>>> idProduct=d3a8
>>>>>>>> [ 6956.453950] usb 1-6.3.6: New USB device strings: Mfr=1,
>>>>>>>> Product=2,
>>>>>>>> SerialNumber=0
>>>>>>>> [ 6956.453955] usb 1-6.3.6: Product: Rtl2832UDVB
>>>>>>>> [ 6956.453959] usb 1-6.3.6: Manufacturer: Realtek
>>>>>>>>
>>>>>>>
>>>>>>> Seems to be Realtek RTL2832U. Add that USB ID to the driver and
>>>>>>> test.
>>>>>>> It is very high probability it starts working.
>>>>>>>
>>>>>>> Here is the patch:
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> http://git.linuxtv.org/anttip/media_tree.git/shortlog/refs/heads/rtl28xxu-usb-ids
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> Please test and report.
>>>>>>>
>>>>>>> regards
>>>>>>> Antti
>>>>>>
>>>>>> --
>>>>>> To unsubscribe from this list: send the line "unsubscribe
>>>>>> linux-media" in
>>>>>> the body of a message to majordomo@vger.kernel.org
>>>>>> More majordomo info at
>>>>>> http://vger.kernel.org/majordomo-info.html
>>>>
>>>> --
>>>> To unsubscribe from this list: send the line "unsubscribe
>>>> linux-media" in
>>>> the body of a message to majordomo@vger.kernel.org
>>>> More majordomo info at http://vger.kernel.org/majordomo-info.html
>> --
>> To unsubscribe from this list: send the line "unsubscribe
>> linux-media" in
>> the body of a message to majordomo@vger.kernel.org
>> More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2012-12-16 21:27 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-12-16 14:23 cannot make this Asus my cinema-u3100miniplusv2 work under linux Renato Gallo
2012-12-16 14:50 ` Antti Palosaari
2012-12-16 17:15 ` Renato Gallo
2012-12-16 17:55 ` Antti Palosaari
2012-12-16 20:13 ` Renato Gallo
2012-12-16 20:34 ` Antti Palosaari
2012-12-16 21:16 ` Renato Gallo
2012-12-16 21:22 ` Antti Palosaari
2012-12-16 21:26 ` Renato Gallo [this message]
2012-12-17 19:57 ` Renato Gallo
2012-12-17 21:45 ` Luca Olivetti
2012-12-17 22:32 ` Renato Gallo
2012-12-31 20:09 ` Antti Palosaari
2013-01-02 2:19 ` Renato Gallo
2013-01-03 15:19 ` Oliver Schinagl
2012-12-16 22:32 ` Antonio Ospite
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=d6185b9c5a69b273609bce494f0302b1@unixproducts.com \
--to=renatogallo@unixproducts.com \
--cc=linux-media@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox