[PATCH v1 4/7] media: ipu3-cio2: Use macros from pfn.h

[Andy Shevchenko <andriy.shevchenko@linux.intel.com>]

There are few nice macros in pfn.h, some of which we may use here.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
---
 drivers/media/pci/intel/ipu3/ipu3-cio2.c | 21 ++++++++++-----------
 1 file changed, 10 insertions(+), 11 deletions(-)

diff --git a/drivers/media/pci/intel/ipu3/ipu3-cio2.c b/drivers/media/pci/intel/ipu3/ipu3-cio2.c
index 2b3a865fa2da..eee7f841050d 100644
--- a/drivers/media/pci/intel/ipu3/ipu3-cio2.c
+++ b/drivers/media/pci/intel/ipu3/ipu3-cio2.c
@@ -16,6 +16,7 @@
 #include <linux/interrupt.h>
 #include <linux/module.h>
 #include <linux/pci.h>
+#include <linux/pfn.h>
 #include <linux/pm_runtime.h>
 #include <linux/property.h>
 #include <linux/vmalloc.h>
@@ -126,7 +127,7 @@ static int cio2_fbpt_init_dummy(struct cio2_device *cio2)
 	 * Initialize each entry to dummy_page bus base address.
 	 */
 	for (i = 0; i < CIO2_MAX_ENTRIES; i++)
-		cio2->dummy_lop[i] = cio2->dummy_page_bus_addr >> PAGE_SHIFT;
+		cio2->dummy_lop[i] = PFN_DOWN(cio2->dummy_page_bus_addr);
 
 	return 0;
 }
@@ -162,7 +163,7 @@ static void cio2_fbpt_entry_init_dummy(struct cio2_device *cio2,
 	entry[1].second_entry.last_page_available_bytes = PAGE_SIZE - 1;
 
 	for (i = 0; i < CIO2_MAX_LOPS; i++)
-		entry[i].lop_page_addr = cio2->dummy_lop_bus_addr >> PAGE_SHIFT;
+		entry[i].lop_page_addr = PFN_DOWN(cio2->dummy_lop_bus_addr);
 
 	cio2_fbpt_entry_enable(cio2, entry);
 }
@@ -179,8 +180,7 @@ static void cio2_fbpt_entry_init_buf(struct cio2_device *cio2,
 
 	entry[0].first_entry.first_page_offset = b->offset;
 	remaining = length + entry[0].first_entry.first_page_offset;
-	entry[1].second_entry.num_of_pages =
-		DIV_ROUND_UP(remaining, PAGE_SIZE);
+	entry[1].second_entry.num_of_pages = PFN_UP(remaining);
 	/*
 	 * last_page_available_bytes has the offset of the last byte in the
 	 * last page which is still accessible by DMA. DMA cannot access
@@ -197,7 +197,7 @@ static void cio2_fbpt_entry_init_buf(struct cio2_device *cio2,
 	remaining = length;
 	i = 0;
 	while (remaining > 0) {
-		entry->lop_page_addr = b->lop_bus_addr[i] >> PAGE_SHIFT;
+		entry->lop_page_addr = PFN_DOWN(b->lop_bus_addr[i]);
 		remaining -= CIO2_MAX_ENTRIES * PAGE_SIZE;
 		entry++;
 		i++;
@@ -206,7 +206,7 @@ static void cio2_fbpt_entry_init_buf(struct cio2_device *cio2,
 	/*
 	 * The first not meaningful FBPT entry should point to a valid LOP
 	 */
-	entry->lop_page_addr = cio2->dummy_lop_bus_addr >> PAGE_SHIFT;
+	entry->lop_page_addr = PFN_DOWN(cio2->dummy_lop_bus_addr);
 
 	cio2_fbpt_entry_enable(cio2, entry);
 }
@@ -472,8 +472,7 @@ static int cio2_hw_init(struct cio2_device *cio2, struct cio2_queue *q)
 	}
 
 	/* Enable DMA */
-	writel(q->fbpt_bus_addr >> PAGE_SHIFT,
-	       base + CIO2_REG_CDMABA(CIO2_DMA_CHAN));
+	writel(PFN_DOWN(q->fbpt_bus_addr), base + CIO2_REG_CDMABA(CIO2_DMA_CHAN));
 
 	writel(num_buffers1 << CIO2_CDMAC0_FBPT_LEN_SHIFT |
 	       FBPT_WIDTH << CIO2_CDMAC0_FBPT_WIDTH_SHIFT |
@@ -838,7 +837,7 @@ static int cio2_vb2_buf_init(struct vb2_buffer *vb)
 	struct device *dev = &cio2->pci_dev->dev;
 	struct cio2_buffer *b =
 		container_of(vb, struct cio2_buffer, vbb.vb2_buf);
-	unsigned int pages = DIV_ROUND_UP(vb->planes[0].length, PAGE_SIZE);
+	unsigned int pages = PFN_UP(vb->planes[0].length);
 	unsigned int lops = DIV_ROUND_UP(pages + 1, CIO2_MAX_ENTRIES);
 	struct sg_table *sg;
 	struct sg_dma_page_iter sg_iter;
@@ -871,7 +870,7 @@ static int cio2_vb2_buf_init(struct vb2_buffer *vb)
 	for_each_sg_dma_page (sg->sgl, &sg_iter, sg->nents, 0) {
 		if (!pages--)
 			break;
-		b->lop[i][j] = sg_page_iter_dma_address(&sg_iter) >> PAGE_SHIFT;
+		b->lop[i][j] = PFN_DOWN(sg_page_iter_dma_address(&sg_iter));
 		j++;
 		if (j == CIO2_MAX_ENTRIES) {
 			i++;
@@ -879,7 +878,7 @@ static int cio2_vb2_buf_init(struct vb2_buffer *vb)
 		}
 	}
 
-	b->lop[i][j] = cio2->dummy_page_bus_addr >> PAGE_SHIFT;
+	b->lop[i][j] = PFN_DOWN(cio2->dummy_page_bus_addr);
 	return 0;
 fail:
 	while (i--)
-- 
2.28.0