From: Sakari Ailus <sakari.ailus@linux.intel.com>
To: linux-media@vger.kernel.org
Cc: laurent.pinchart@ideasonboard.com,
Dave Stevenson <dave.stevenson@raspberrypi.com>,
Jacopo Mondi <jacopo.mondi@ideasonboard.com>,
Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>,
Jai Luthra <jai.luthra@ideasonboard.com>,
Mehdi Djait <mehdi.djait@linux.intel.com>
Subject: [PATCH 17/17] staging: media: ipu7: Use v4l2_subdev_get_frame_desc()
Date: Wed, 13 May 2026 13:43:58 +0300 [thread overview]
Message-ID: <20260513104358.2252605-18-sakari.ailus@linux.intel.com> (raw)
In-Reply-To: <20260513104358.2252605-1-sakari.ailus@linux.intel.com>
Call v4l2_subdev_get_frame_desc() to obtain the frame descriptor. This is
preferred over calling the get_frame_desc() pad operation directly.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
---
.../staging/media/ipu7/ipu7-isys-csi-phy.c | 16 ++++++--------
drivers/staging/media/ipu7/ipu7-isys-csi2.c | 22 +++++++++----------
2 files changed, 17 insertions(+), 21 deletions(-)
diff --git a/drivers/staging/media/ipu7/ipu7-isys-csi-phy.c b/drivers/staging/media/ipu7/ipu7-isys-csi-phy.c
index 3f15af3b4c79..75ac77e1b782 100644
--- a/drivers/staging/media/ipu7/ipu7-isys-csi-phy.c
+++ b/drivers/staging/media/ipu7/ipu7-isys-csi-phy.c
@@ -5,6 +5,7 @@
#include <linux/bitmap.h>
#include <linux/bug.h>
+#include <linux/cleanup.h>
#include <linux/delay.h>
#include <linux/device.h>
#include <linux/iopoll.h>
@@ -300,7 +301,8 @@ static int ipu7_isys_csi_ctrl_dids_config(struct ipu7_isys_csi2 *csi2, u32 id)
{
struct v4l2_mbus_frame_desc_entry *desc_entry = NULL;
struct device *dev = &csi2->isys->adev->auxdev.dev;
- struct v4l2_mbus_frame_desc desc;
+ struct v4l2_mbus_frame_desc *desc __free(v4l2_subdev_free_frame_desc) =
+ NULL;
struct v4l2_subdev *ext_sd;
struct media_pad *pad;
unsigned int i;
@@ -318,17 +320,13 @@ static int ipu7_isys_csi_ctrl_dids_config(struct ipu7_isys_csi2 *csi2, u32 id)
pad->entity->name))
return -ENODEV;
- ret = v4l2_subdev_call(ext_sd, pad, get_frame_desc, pad->index, &desc);
+ desc = v4l2_subdev_get_frame_desc(ext_sd, pad->index,
+ V4L2_MBUS_FRAME_DESC_TYPE_CSI2);
if (ret)
return ret;
- if (desc.type != V4L2_MBUS_FRAME_DESC_TYPE_CSI2) {
- dev_warn(dev, "Unsupported frame descriptor type\n");
- return -EINVAL;
- }
-
- for (i = 0; i < desc.num_entries; i++) {
- desc_entry = &desc.entry[i];
+ for (i = 0; i < desc->num_entries; i++) {
+ desc_entry = &desc->entry[i];
if (desc_entry->bus.csi2.vc < IPU7_NR_OF_CSI2_VC) {
ret = __dids_config(csi2, id, desc_entry->bus.csi2.vc,
desc_entry->bus.csi2.dt);
diff --git a/drivers/staging/media/ipu7/ipu7-isys-csi2.c b/drivers/staging/media/ipu7/ipu7-isys-csi2.c
index f34eabfe8a98..5a4a53ae1104 100644
--- a/drivers/staging/media/ipu7/ipu7-isys-csi2.c
+++ b/drivers/staging/media/ipu7/ipu7-isys-csi2.c
@@ -6,6 +6,7 @@
#include <linux/atomic.h>
#include <linux/bits.h>
#include <linux/bug.h>
+#include <linux/cleanup.h>
#include <linux/delay.h>
#include <linux/device.h>
#include <linux/io.h>
@@ -491,7 +492,8 @@ int ipu7_isys_csi2_get_remote_desc(u32 source_stream,
{
struct v4l2_mbus_frame_desc_entry *desc_entry = NULL;
struct device *dev = &csi2->isys->adev->auxdev.dev;
- struct v4l2_mbus_frame_desc desc;
+ struct v4l2_mbus_frame_desc *desc __free(v4l2_subdev_free_frame_desc) =
+ NULL;
struct v4l2_subdev *source;
struct media_pad *pad;
unsigned int i;
@@ -505,18 +507,14 @@ int ipu7_isys_csi2_get_remote_desc(u32 source_stream,
if (!pad)
return -EPIPE;
- ret = v4l2_subdev_call(source, pad, get_frame_desc, pad->index, &desc);
+ desc = v4l2_subdev_get_frame_desc(source, pad->index,
+ V4L2_MBUS_FRAME_DESC_TYPE_CSI2);
if (ret)
return ret;
- if (desc.type != V4L2_MBUS_FRAME_DESC_TYPE_CSI2) {
- dev_err(dev, "Unsupported frame descriptor type\n");
- return -EINVAL;
- }
-
- for (i = 0; i < desc.num_entries; i++) {
- if (source_stream == desc.entry[i].stream) {
- desc_entry = &desc.entry[i];
+ for (i = 0; i < desc->num_entries; i++) {
+ if (source_stream == desc->entry[i].stream) {
+ desc_entry = &desc->entry[i];
break;
}
}
@@ -534,8 +532,8 @@ int ipu7_isys_csi2_get_remote_desc(u32 source_stream,
*entry = *desc_entry;
- for (i = 0; i < desc.num_entries; i++) {
- if (desc_entry->bus.csi2.vc == desc.entry[i].bus.csi2.vc)
+ for (i = 0; i < desc->num_entries; i++) {
+ if (desc_entry->bus.csi2.vc == desc->entry[i].bus.csi2.vc)
(*nr_queues)++;
}
--
2.47.3
prev parent reply other threads:[~2026-05-13 10:44 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-05-13 10:43 [PATCH 00/17] Rework frame descriptors Sakari Ailus
2026-05-13 10:43 ` [PATCH 01/17] media: v4l2-common: Add mipi_csi2_dt_for_mbus() Sakari Ailus
2026-05-13 10:43 ` [PATCH 02/17] media: v4l2-subdev: Align frame descriptor error codes with routing Sakari Ailus
2026-05-13 10:43 ` [PATCH 03/17] media: v4l2-subdev: Prepare for changes in getting frame descriptors Sakari Ailus
2026-05-13 10:43 ` [PATCH 04/17] media: v4l2-subdev: Allocate frame descriptors based on the need Sakari Ailus
2026-05-13 10:43 ` [PATCH 05/17] media: v4l2-subdev: Provide a cleanup-friendly get_frame_desc Sakari Ailus
2026-05-13 10:43 ` [PATCH 06/17] media: v4l2-subdev: Change the maximum number of routes Sakari Ailus
2026-05-13 10:43 ` [PATCH 07/17] media: v4l2-subdev: Return dynamically allocated pass-through routes Sakari Ailus
2026-05-13 10:43 ` [PATCH 08/17] media: v4l2-subdev: Always return at least one frame descriptor Sakari Ailus
2026-05-13 10:43 ` [PATCH 09/17] media: bcm2835-unicam: Use v4l2_subdev_get_frame_desc() Sakari Ailus
2026-05-13 10:43 ` [PATCH 10/17] media: nxp: imx8-isi: " Sakari Ailus
2026-05-13 10:43 ` [PATCH 11/17] media: raspberrypi: cfe: " Sakari Ailus
2026-05-13 10:43 ` [PATCH 12/17] media: rzg2l-cru: " Sakari Ailus
2026-05-13 10:43 ` [PATCH 13/17] media: rkisp1: " Sakari Ailus
2026-05-13 10:43 ` [PATCH 14/17] media: exynos4-is: " Sakari Ailus
2026-05-13 10:43 ` [PATCH 15/17] media: ti: cal: " Sakari Ailus
2026-05-13 10:43 ` [PATCH 16/17] media: ipu6: " Sakari Ailus
2026-05-13 10:43 ` Sakari Ailus [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260513104358.2252605-18-sakari.ailus@linux.intel.com \
--to=sakari.ailus@linux.intel.com \
--cc=dave.stevenson@raspberrypi.com \
--cc=jacopo.mondi@ideasonboard.com \
--cc=jai.luthra@ideasonboard.com \
--cc=laurent.pinchart@ideasonboard.com \
--cc=linux-media@vger.kernel.org \
--cc=mehdi.djait@linux.intel.com \
--cc=tomi.valkeinen@ideasonboard.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox