Linux Media Controller development
 help / color / mirror / Atom feed
From: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
To: Hans de Goede <hdegoede@redhat.com>
Cc: Daniel Scally <djrscally@gmail.com>,
	Laurent Pinchart <laurent.pinchart@ideasonboard.com>,
	Kate Hsuan <hpa@redhat.com>,
	Linux Media Mailing List <linux-media@vger.kernel.org>,
	libcamera-devel@lists.libcamera.org
Subject: Re: Fwd: Surface Go VCM type (was: Need to pass acpi_enforce_resources=lax on the Surface Go (version1))
Date: Mon, 8 Nov 2021 16:12:57 +0200	[thread overview]
Message-ID: <YYkwaY1C77BRmJat@smile.fi.intel.com> (raw)
In-Reply-To: <b0a6a762-3445-7c61-3510-6bd493f8e0fa@redhat.com>

On Mon, Nov 08, 2021 at 02:12:38PM +0100, Hans de Goede wrote:
> On 11/2/21 00:43, Daniel Scally wrote:

> Does this sound reasonable / like I'm heading in the right direction?

It is up to you folks, since I have no time to participate in this with
a full dive right now. Below just some comments on the patches in case
they will go.

...

> -	struct acpi_device *adev = ACPI_COMPANION(dev);
> +	struct acpi_device *adev = to_acpi_device_node(fwnode);
>  	struct i2c_acpi_lookup lookup;
>  	struct i2c_adapter *adapter;
>  	LIST_HEAD(resource_list);
>  	int ret;

Make sense to move assignment here.

	adev = to_acpi_device_node(fwnode);

> +	if (!adev)
> +		return ERR_PTR(-ENODEV);

...

> +static inline struct i2c_client *i2c_acpi_new_device(struct device *dev,
> +						     int index,
> +						     struct i2c_board_info *info)
> +{
> +	return i2c_acpi_new_device_by_fwnode(dev->fwnode, index, info);

dev_fwnode(dev)

> +}

...

> +int cio2_bridge_sensors_are_ready(void)
> +{
> +	struct acpi_device *adev;

> +	bool ready = true;

Redundant. See below.

> +	unsigned int i;
> +
> +	for (i = 0; i < ARRAY_SIZE(cio2_supported_sensors); i++) {
> +		const struct cio2_sensor_config *cfg =
> +			&cio2_supported_sensors[i];
> +
> +		for_each_acpi_dev_match(adev, cfg->hid, NULL, -1) {
> +			if (!adev->status.enabled)
> +				continue;

> +			if (!acpi_dev_ready_for_enumeration(adev))
> +				ready = false;

You may put the adev here and return false.

> +		}
> +	}

> +	return ready;

So return true.

> +}

...

> +	if (sensor->ssdb.vcmtype)
> +		nodes[SWNODE_VCM] = NODE_VCM(
> +					cio2_vcm_types[sensor->ssdb.vcmtype - 1]);

Wouldn't be better

		nodes[SWNODE_VCM] =
			NODE_VCM(cio2_vcm_types[sensor->ssdb.vcmtype - 1]);

?

...

> +	sensor->vcm_i2c_client = i2c_acpi_new_device_by_fwnode(
> +					acpi_fwnode_handle(sensor->adev),
> +					1, &board_info);

Ditto.

-- 
With Best Regards,
Andy Shevchenko



  reply	other threads:[~2021-11-08 14:14 UTC|newest]

Thread overview: 46+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <e2312277-f967-7d3f-5ce9-fbb197d35fd6@gmail.com>
2021-10-29 11:50 ` Fwd: Surface Go VCM type (was: Need to pass acpi_enforce_resources=lax on the Surface Go (version1)) Daniel Scally
2021-11-01 15:55   ` Andy Shevchenko
2021-11-01 15:59     ` Andy Shevchenko
2021-11-01 23:26     ` Daniel Scally
2021-11-01 16:02   ` Hans de Goede
2021-11-01 19:18     ` Andy Shevchenko
2021-11-01 19:51       ` Hans de Goede
2021-11-01 23:43     ` Daniel Scally
2021-11-04 14:49       ` Hans de Goede
2021-11-04 18:14         ` Andy Shevchenko
2021-11-06 14:12           ` Hans de Goede
2021-11-06 18:39             ` Andy Shevchenko
2021-11-04 23:20         ` Daniel Scally
2021-11-08 13:12       ` Hans de Goede
2021-11-08 14:12         ` Andy Shevchenko [this message]
2021-11-16  9:54           ` Hans de Goede
2021-11-16 12:26             ` Andy Shevchenko
2021-11-09  0:43         ` Daniel Scally
2021-11-09 12:09           ` Daniel Scally
2021-11-09 16:02             ` Hans de Goede
2021-11-09 16:35               ` Daniel Scally
2021-11-10  0:01                 ` Daniel Scally
2021-11-10  8:15                   ` Andy Shevchenko
2021-11-11 10:35                   ` Hans de Goede
2021-11-11 11:18                     ` Daniel Scally
2021-11-11 15:23                       ` Hans de Goede
2021-11-11 15:51                         ` Dave Stevenson
2021-11-11 16:50                           ` Hans de Goede
2021-11-11 19:30                             ` Dave Stevenson
2021-11-11 22:04                               ` Laurent Pinchart
2021-11-12 10:32                                 ` Dave Stevenson
2021-11-12 10:46                                   ` Laurent Pinchart
2021-11-12 11:37                                     ` Andy Shevchenko
2021-11-15 13:33                                       ` Laurent Pinchart
2021-11-15 15:03                                         ` Andy Shevchenko
2021-11-12 11:43                                     ` Dave Stevenson
2021-11-15 13:21                                       ` Laurent Pinchart
2021-11-12 12:23                                     ` Sakari Ailus
2021-11-15 12:00                                       ` Laurent Pinchart
2021-11-12 17:51                                     ` [libcamera-devel] " Kieran Bingham
2021-11-15 13:08                                       ` Laurent Pinchart
2021-11-11 15:51                         ` Laurent Pinchart
2021-11-23 12:10                         ` Daniel Scally
2021-11-23 19:02                           ` Hans de Goede
2021-11-11 15:59                 ` Hans de Goede
2021-11-15 23:43                   ` Daniel Scally

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=YYkwaY1C77BRmJat@smile.fi.intel.com \
    --to=andriy.shevchenko@linux.intel.com \
    --cc=djrscally@gmail.com \
    --cc=hdegoede@redhat.com \
    --cc=hpa@redhat.com \
    --cc=laurent.pinchart@ideasonboard.com \
    --cc=libcamera-devel@lists.libcamera.org \
    --cc=linux-media@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox