Mediatek MT8135 dts updates

Mediatek MT8135 dts updates

[Sascha Hauer]

This series contains the Mediatek MT8135 dts updates for the clock
support and UART support. This needs these two series:

[PATCH v12] clk: Add common clock support for Mediatek MT8135 and MT8173
tty: serial: 8250_mtk: Add support for second clock

Also this adds the PMIC wrapper nodes to the dtsi file and PMIC node to
the mt8135-evbp1 board. Support for the PMIC wrapper was merged during
the v4.1 merge window.

This series is meant for testing the new features, not (yet) for inclusion.

----------------------------------------------------------------

The following changes since commit 39a8804455fb23f09157341d3ba7db6d7ae6ee76:

  Linux 4.0 (2015-04-12 15:12:50 -0700)

are available in the git repository at:

  git://git.pengutronix.de/git/sha/linux-2.6.git tags/v4.0-mtk-arm-dts

for you to fetch changes up to 5fcd75a6aeded756c24d9581f49e0859b85fb3a0:

  ARM: dts: mediatek mt8135: Use real UART clocks (2015-04-23 11:02:27 +0200)

----------------------------------------------------------------

James Liao (1):
      ARM: dts: mediatek: Enable clock support for Mediatek MT8135.

Sascha Hauer (3):
      ARM: dts: mt8135: Add pmic wrapper nodes
      ARM: dts: mt8135-evbp1: Add PMIC support
      ARM: dts: mediatek mt8135: Use real UART clocks

 arch/arm/boot/dts/mt8135-evbp1.dts | 193 +++++++++++++++++++++++++++++++++++++
 arch/arm/boot/dts/mt8135.dtsi      |  58 ++++++++++-
 2 files changed, 247 insertions(+), 4 deletions(-)

[PATCH 1/4] ARM: dts: mediatek: Enable clock support for Mediatek MT8135.

[Sascha Hauer]

From: James Liao <jamesjj.liao-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>

This patch adds MT8135 clock controllers into device tree.

Signed-off-by: James Liao <jamesjj.liao-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
Signed-off-by: Henry Chen <henryc.chen-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
Signed-off-by: Sascha Hauer <s.hauer-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
---
 arch/arm/boot/dts/mt8135.dtsi | 32 ++++++++++++++++++++++++++++++++
 1 file changed, 32 insertions(+)

diff --git a/arch/arm/boot/dts/mt8135.dtsi b/arch/arm/boot/dts/mt8135.dtsi
index a161e99..b4017e2 100644
--- a/arch/arm/boot/dts/mt8135.dtsi
+++ b/arch/arm/boot/dts/mt8135.dtsi
@@ -12,6 +12,7 @@
  * GNU General Public License for more details.
  */
 
+#include <dt-bindings/clock/mt8135-clk.h>
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include "skeleton64.dtsi"
@@ -93,6 +94,11 @@
 			#clock-cells = <0>;
 		};
 
+		clk26m: clk26m {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <26000000>;
+		};
 	};
 
 	soc {
@@ -101,6 +107,26 @@
 		compatible = "simple-bus";
 		ranges;
 
+		topckgen: topckgen@10000000 {
+			compatible = "mediatek,mt8135-topckgen";
+			reg = <0 0x10000000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		infracfg: infracfg@10001000 {
+			#reset-cells = <1>;
+			#clock-cells = <1>;
+			compatible = "mediatek,mt8135-infracfg", "syscon";
+			reg = <0 0x10001000 0 0x1000>;
+		};
+
+		pericfg: pericfg@10003000 {
+			#reset-cells = <1>;
+			#clock-cells = <1>;
+			compatible = "mediatek,mt8135-pericfg", "syscon";
+			reg = <0 0x10003000 0 0x1000>;
+		};
+
 		timer: timer@10008000 {
 			compatible = "mediatek,mt8135-timer",
 					"mediatek,mt6577-timer";
@@ -119,6 +145,12 @@
 			reg = <0 0x10200030 0 0x1c>;
 		};
 
+		apmixedsys: apmixedsys@10209000 {
+			compatible = "mediatek,mt8135-apmixedsys";
+			reg = <0 0x10209000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
 		gic: interrupt-controller@10211000 {
 			compatible = "arm,cortex-a15-gic";
 			interrupt-controller;
-- 
2.1.4

[PATCH 2/4] ARM: dts: mt8135: Add pmic wrapper nodes

[Sascha Hauer]

This adds the pmic wrapper node to the MediaTek MT8135 dtsi file.

This unit is used to access the PMIC on MediaTek boards.

Signed-off-by: Sascha Hauer <s.hauer-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
---
 arch/arm/boot/dts/mt8135.dtsi | 14 ++++++++++++++
 1 file changed, 14 insertions(+)

diff --git a/arch/arm/boot/dts/mt8135.dtsi b/arch/arm/boot/dts/mt8135.dtsi
index b4017e2..b0f20fc 100644
--- a/arch/arm/boot/dts/mt8135.dtsi
+++ b/arch/arm/boot/dts/mt8135.dtsi
@@ -15,6 +15,7 @@
 #include <dt-bindings/clock/mt8135-clk.h>
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/reset-controller/mt8135-resets.h>
 #include "skeleton64.dtsi"
 
 / {
@@ -127,6 +128,19 @@
 			reg = <0 0x10003000 0 0x1000>;
 		};
 
+		pwrap: pwrap@1000f000 {
+			compatible = "mediatek,mt8135-pwrap";
+			reg = <0 0x1000f000 0 0x1000>,
+				<0 0x11017000 0 0x1000>;
+			reg-names = "pwrap", "pwrap-bridge";
+			interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>;
+			resets = <&infracfg MT8135_INFRA_PMIC_WRAP_RST>,
+					<&pericfg MT8135_PERI_PWRAP_BRIDGE_SW_RST>;
+			reset-names = "pwrap", "pwrap-bridge";
+			clocks = <&clk26m>, <&clk26m>;
+			clock-names = "spi", "wrap";
+		};
+
 		timer: timer@10008000 {
 			compatible = "mediatek,mt8135-timer",
 					"mediatek,mt6577-timer";
-- 
2.1.4

Re: [PATCH 2/4] ARM: dts: mt8135: Add pmic wrapper nodes

[Yingjoe Chen]

On Thu, 2015-04-23 at 11:21 +0200, Sascha Hauer wrote:
> This adds the pmic wrapper node to the MediaTek MT8135 dtsi file.
> 
> This unit is used to access the PMIC on MediaTek boards.
> 
> Signed-off-by: Sascha Hauer <s.hauer-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
> ---
>  arch/arm/boot/dts/mt8135.dtsi | 14 ++++++++++++++
>  1 file changed, 14 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/mt8135.dtsi b/arch/arm/boot/dts/mt8135.dtsi
> index b4017e2..b0f20fc 100644
> --- a/arch/arm/boot/dts/mt8135.dtsi
> +++ b/arch/arm/boot/dts/mt8135.dtsi
> @@ -15,6 +15,7 @@
>  #include <dt-bindings/clock/mt8135-clk.h>
>  #include <dt-bindings/interrupt-controller/irq.h>
>  #include <dt-bindings/interrupt-controller/arm-gic.h>
> +#include <dt-bindings/reset-controller/mt8135-resets.h>
>  #include "skeleton64.dtsi"
>  
>  / {
> @@ -127,6 +128,19 @@
>  			reg = <0 0x10003000 0 0x1000>;
>  		};
>  
> +		pwrap: pwrap@1000f000 {
> +			compatible = "mediatek,mt8135-pwrap";
> +			reg = <0 0x1000f000 0 0x1000>,
> +				<0 0x11017000 0 0x1000>;
> +			reg-names = "pwrap", "pwrap-bridge";
> +			interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>;
> +			resets = <&infracfg MT8135_INFRA_PMIC_WRAP_RST>,
> +					<&pericfg MT8135_PERI_PWRAP_BRIDGE_SW_RST>;
> +			reset-names = "pwrap", "pwrap-bridge";
> +			clocks = <&clk26m>, <&clk26m>;
> +			clock-names = "spi", "wrap";
> +		};
> +
>  		timer: timer@10008000 {

Hi Sascha,

It seems we have many 8135 dtsi updates recently.
Please sort according to node instance address so it will be easier to
merge or resolve conflict.

Joe.C

[PATCH 3/4] ARM: dts: mt8135-evbp1: Add PMIC support

[Sascha Hauer]

The MT8135 eval board contains a MT6397 PMIC. This adds the
corresponding device node to the dts file.

Signed-off-by: Sascha Hauer <s.hauer-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
---
 arch/arm/boot/dts/mt8135-evbp1.dts | 193 +++++++++++++++++++++++++++++++++++++
 1 file changed, 193 insertions(+)

diff --git a/arch/arm/boot/dts/mt8135-evbp1.dts b/arch/arm/boot/dts/mt8135-evbp1.dts
index 3667738..357a91f 100644
--- a/arch/arm/boot/dts/mt8135-evbp1.dts
+++ b/arch/arm/boot/dts/mt8135-evbp1.dts
@@ -24,6 +24,199 @@
 	};
 };
 
+&pwrap {
+	pmic: mt6397 {
+		compatible = "mediatek,mt6397";
+
+		mt6397regulator: mt6397regulator {
+			compatible = "mediatek,mt6397-regulator";
+
+			mt6397_vpca15_reg: buck_vpca15 {
+				regulator-compatible = "buck_vpca15";
+				regulator-name = "vpca15";
+				regulator-min-microvolt = < 850000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <12500>;
+				regulator-always-on;
+			};
+
+			mt6397_vpca7_reg: buck_vpca7 {
+				regulator-compatible = "buck_vpca7";
+				regulator-name = "vpca7";
+				regulator-min-microvolt = < 850000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <12500>;
+				regulator-always-on;
+			};
+
+			mt6397_vsramca15_reg: buck_vsramca15 {
+				regulator-compatible = "buck_vsramca15";
+				regulator-name = "vsramca15";
+				regulator-min-microvolt = < 850000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <12500>;
+				regulator-always-on;
+			};
+
+			mt6397_vsramca7_reg: buck_vsramca7 {
+				regulator-compatible = "buck_vsramca7";
+				regulator-name = "vsramca7";
+				regulator-min-microvolt = < 850000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <12500>;
+				regulator-always-on;
+			};
+
+			mt6397_vcore_reg: buck_vcore {
+				regulator-compatible = "buck_vcore";
+				regulator-name = "vcore";
+				regulator-min-microvolt = < 850000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <12500>;
+				regulator-always-on;
+			};
+
+			mt6397_vgpu_reg: buck_vgpu {
+				regulator-compatible = "buck_vgpu";
+				regulator-name = "vgpu";
+				regulator-min-microvolt = < 700000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <12500>;
+				regulator-enable-ramp-delay = <115>;
+			};
+
+			mt6397_vdrm_reg: buck_vdrm {
+				regulator-compatible = "buck_vdrm";
+				regulator-name = "vdrm";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1400000>;
+				regulator-ramp-delay = <12500>;
+				regulator-always-on;
+			};
+
+			mt6397_vio18_reg: buck_vio18 {
+				regulator-compatible = "buck_vio18";
+				regulator-name = "vio18";
+				regulator-min-microvolt = <1620000>;
+				regulator-max-microvolt = <1980000>;
+				regulator-ramp-delay = <12500>;
+				regulator-always-on;
+			};
+
+			mt6397_vtcxo_reg: ldo_vtcxo {
+				regulator-compatible = "ldo_vtcxo";
+				regulator-name = "vtcxo";
+				regulator-always-on;
+			};
+
+			mt6397_va28_reg: ldo_va28 {
+				regulator-compatible = "ldo_va28";
+				regulator-name = "va28";
+				regulator-always-on;
+			};
+
+			mt6397_vcama_reg: ldo_vcama {
+				regulator-compatible = "ldo_vcama";
+				regulator-name = "vcama";
+				regulator-min-microvolt = <1500000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-enable-ramp-delay = <218>;
+			};
+
+			mt6397_vio28_reg: ldo_vio28 {
+				regulator-compatible = "ldo_vio28";
+				regulator-name = "vio28";
+				regulator-always-on;
+			};
+
+			mt6397_vusb_reg: ldo_vusb {
+				regulator-compatible = "ldo_vusb";
+				regulator-name = "vusb";
+			};
+
+			mt6397_vmc_reg: ldo_vmc {
+				regulator-compatible = "ldo_vmc";
+				regulator-name = "vmc";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-enable-ramp-delay = <218>;
+			};
+
+			mt6397_vmch_reg: ldo_vmch {
+				regulator-compatible = "ldo_vmch";
+				regulator-name = "vmch";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-enable-ramp-delay = <218>;
+			};
+
+			mt6397_vemc_3v3_reg: ldo_vemc3v3 {
+				regulator-compatible = "ldo_vemc3v3";
+				regulator-name = "vemc_3v3";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-enable-ramp-delay = <218>;
+			};
+
+			mt6397_vgp1_reg: ldo_vgp1 {
+				regulator-compatible = "ldo_vgp1";
+				regulator-name = "vcamd";
+				regulator-min-microvolt = <1220000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-enable-ramp-delay = <240>;
+			};
+
+			mt6397_vgp2_reg: ldo_vgp2 {
+				regulator-compatible = "ldo_vgp2";
+				regulator-name = "vcamio";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-enable-ramp-delay = <218>;
+			};
+
+			mt6397_vgp3_reg: ldo_vgp3 {
+				regulator-compatible = "ldo_vgp3";
+				regulator-name = "vcamaf";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-enable-ramp-delay = <218>;
+			};
+
+			mt6397_vgp4_reg: ldo_vgp4 {
+				regulator-compatible = "ldo_vgp4";
+				regulator-name = "vgp4";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-enable-ramp-delay = <218>;
+			};
+
+			mt6397_vgp5_reg: ldo_vgp5 {
+				regulator-compatible = "ldo_vgp5";
+				regulator-name = "vgp5";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-enable-ramp-delay = <218>;
+			};
+
+			mt6397_vgp6_reg: ldo_vgp6 {
+				regulator-compatible = "ldo_vgp6";
+				regulator-name = "vgp6";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-enable-ramp-delay = <218>;
+			};
+
+			mt6397_vibr_reg: ldo_vibr {
+				regulator-compatible = "ldo_vibr";
+				regulator-name = "vibr";
+				regulator-min-microvolt = <1300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-enable-ramp-delay = <218>;
+			};
+		};
+	};
+};
+
 &uart3 {
 	status = "okay";
 };
-- 
2.1.4

[PATCH 4/4] ARM: dts: mediatek mt8135: Use real UART clocks

[Sascha Hauer]

We used to provide dummy clocks for the UART. Now that we have
common clock support we can provide the real clocks to the UART.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/boot/dts/mt8135.dtsi | 12 ++++++++----
 1 file changed, 8 insertions(+), 4 deletions(-)

diff --git a/arch/arm/boot/dts/mt8135.dtsi b/arch/arm/boot/dts/mt8135.dtsi
index b0f20fc..4d1ddd9 100644
--- a/arch/arm/boot/dts/mt8135.dtsi
+++ b/arch/arm/boot/dts/mt8135.dtsi
@@ -180,7 +180,8 @@
 			compatible = "mediatek,mt8135-uart","mediatek,mt6577-uart";
 			reg = <0 0x11006000 0 0x400>;
 			interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_LOW>;
-			clocks = <&uart_clk>;
+			clocks = <&pericfg CLK_PERI_UART0_SEL>, <&pericfg CLK_PERI_UART0>;
+			clock-names = "baud", "bus";
 			status = "disabled";
 		};
 
@@ -188,7 +189,8 @@
 			compatible = "mediatek,mt8135-uart","mediatek,mt6577-uart";
 			reg = <0 0x11007000 0 0x400>;
 			interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_LOW>;
-			clocks = <&uart_clk>;
+			clocks = <&pericfg CLK_PERI_UART1_SEL>, <&pericfg CLK_PERI_UART1>;
+			clock-names = "baud", "bus";
 			status = "disabled";
 		};
 
@@ -196,7 +198,8 @@
 			compatible = "mediatek,mt8135-uart","mediatek,mt6577-uart";
 			reg = <0 0x11008000 0 0x400>;
 			interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_LOW>;
-			clocks = <&uart_clk>;
+			clocks = <&pericfg CLK_PERI_UART2_SEL>, <&pericfg CLK_PERI_UART2>;
+			clock-names = "baud", "bus";
 			status = "disabled";
 		};
 
@@ -204,7 +207,8 @@
 			compatible = "mediatek,mt8135-uart","mediatek,mt6577-uart";
 			reg = <0 0x11009000 0 0x400>;
 			interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_LOW>;
-			clocks = <&uart_clk>;
+			clocks = <&pericfg CLK_PERI_UART3_SEL>, <&pericfg CLK_PERI_UART3>;
+			clock-names = "baud", "bus";
 			status = "disabled";
 		};
 
-- 
2.1.4

Re: [PATCH 4/4] ARM: dts: mediatek mt8135: Use real UART clocks

[Matthias Brugger]

2015-04-23 11:21 GMT+02:00 Sascha Hauer <s.hauer-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>:
> We used to provide dummy clocks for the UART. Now that we have
> common clock support we can provide the real clocks to the UART.
>
> Signed-off-by: Sascha Hauer <s.hauer-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
> ---
>  arch/arm/boot/dts/mt8135.dtsi | 12 ++++++++----
>  1 file changed, 8 insertions(+), 4 deletions(-)
>
> diff --git a/arch/arm/boot/dts/mt8135.dtsi b/arch/arm/boot/dts/mt8135.dtsi
> index b0f20fc..4d1ddd9 100644
> --- a/arch/arm/boot/dts/mt8135.dtsi
> +++ b/arch/arm/boot/dts/mt8135.dtsi
> @@ -180,7 +180,8 @@
>                         compatible = "mediatek,mt8135-uart","mediatek,mt6577-uart";
>                         reg = <0 0x11006000 0 0x400>;
>                         interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_LOW>;
> -                       clocks = <&uart_clk>;
> +                       clocks = <&pericfg CLK_PERI_UART0_SEL>, <&pericfg CLK_PERI_UART0>;
> +                       clock-names = "baud", "bus";
>                         status = "disabled";
>                 };

We can delete the dummy uart_clk, as it is not needed any more.

-- 
motzblog.wordpress.com

Mediatek MT8135 dts updates

[Sascha Hauer]

This series contains dts updates for the Mediatek MT8135 to enable
recently added Kernel features. Last time I sent this the dt-include
files were missing. This time this should be ready to get merged.

Sascha

----------------------------------------------------------------
James Liao (1):
      ARM: dts: mediatek: Enable clock support for Mediatek MT8135.

Sascha Hauer (3):
      ARM: dts: mt8135: Add pmic wrapper nodes
      ARM: dts: mt8135-evbp1: Add PMIC support
      ARM: dts: mediatek mt8135: Use real UART clocks

 arch/arm/boot/dts/mt8135-evbp1.dts | 193 +++++++++++++++++++++++++++++++++++++
 arch/arm/boot/dts/mt8135.dtsi      |  58 +++++++++--
 2 files changed, 244 insertions(+), 7 deletions(-)

[PATCH 2/4] ARM: dts: mt8135: Add pmic wrapper nodes

[Sascha Hauer]

This adds the pmic wrapper node to the MediaTek MT8135 dtsi file.

This unit is used to access the PMIC on MediaTek boards.

Signed-off-by: Sascha Hauer <s.hauer-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
---
 arch/arm/boot/dts/mt8135.dtsi | 14 ++++++++++++++
 1 file changed, 14 insertions(+)

diff --git a/arch/arm/boot/dts/mt8135.dtsi b/arch/arm/boot/dts/mt8135.dtsi
index b99e488..36ff82a 100644
--- a/arch/arm/boot/dts/mt8135.dtsi
+++ b/arch/arm/boot/dts/mt8135.dtsi
@@ -15,6 +15,7 @@
 #include <dt-bindings/clock/mt8135-clk.h>
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/reset-controller/mt8135-resets.h>
 #include "skeleton64.dtsi"
 #include "mt8135-pinfunc.h"
 
@@ -160,6 +161,19 @@
 			clock-names = "system-clk", "rtc-clk";
 		};
 
+		pwrap: pwrap@1000f000 {
+			compatible = "mediatek,mt8135-pwrap";
+			reg = <0 0x1000f000 0 0x1000>,
+				<0 0x11017000 0 0x1000>;
+			reg-names = "pwrap", "pwrap-bridge";
+			interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>;
+			resets = <&infracfg MT8135_INFRA_PMIC_WRAP_RST>,
+					<&pericfg MT8135_PERI_PWRAP_BRIDGE_SW_RST>;
+			reset-names = "pwrap", "pwrap-bridge";
+			clocks = <&clk26m>, <&clk26m>;
+			clock-names = "spi", "wrap";
+		};
+
 		sysirq: interrupt-controller@10200030 {
 			compatible = "mediatek,mt8135-sysirq",
 				     "mediatek,mt6577-sysirq";
-- 
2.1.4