[PATCH v4 00/14] arm64: mediatek: Add M.2 E-key slot on Chromebooks

[PATCH v4 00/14] arm64: mediatek: Add M.2 E-key slot on Chromebooks

[Chen-Yu Tsai]

Hi everyone,

This is v4 of my attempt at integrating the power sequencing API into
the USB core to support the USB connection on M.2 E-key slots. M.2
E-key was enabled in v7.1-rc1 with just PCIe and UART supported [1].

Changes since v3:
- Added missing stub function for !POWER_SEQUENCING (patch 3) (Sashiko)
- Added missing fwnode_handle_put() (patch 5) (Sashiko)
- Added new patch to move |struct usb_port| related declarations to
  separate header (patch 6) (Andy)
- Patch 9 (usb hub pwrseq integration)
  - Adapted to move of usb_port_is_power_on() to port.c and port.h
  - Simplified usb_hub_set_port_pwrseq() (Andy)
  - Renamed usb_hub_set_port_pwrseq()'s "set" parameter to "on"
  - Dropped usb_hub_restore_port_pwrseq() (use usb_hub_set_port_pwrseq()
    with inverted argument)
  - Fixed off-by-one access in hub_is_port_power_switchable() (Sashiko)
  - Assign retval from dev_err_probe() instead of the other way around (Andy)
  - Clear hub->ports[port1 - 1] in USB port error and remove paths to
    avoid other threads from accidental UAF while the USB hub device is
    being unwound (Sashiko)
  - Short-circuit out of helpers if !IS_ENABLED(CONFIG_POWER_SEQUENCING)
    to avoid errors from stub functions (Sashiko)
- Drop redundant device node validity check; device_match_of_node()
  does it internally (patch 11) (Andy)
- Link to v3:
  https://lore.kernel.org/all/20260703110317.1283411-1-wenst@chromium.org/

Major changes since v2:
- Removed changes for MT8192 Asurada family: one of the device is
  shipped with RTL8822CE-VR, which is PCIe + UART and needs more work.
- Removed changes for USB A ports: VBUS one the type A ports on
  Chromebooks are not directly controllable from the OS and VBUS is
  modeled as always on. As such the changes I made don't actually
  change how the system works.
- Added new pwrseq_power_is_on() function
- Make new pwrseq integration effectively OF only by not assigning the
  port fwnode if the hub's fwnode is an ACPI node
- Added patch to convert remaining instances of directly setting/clearing
  USB_PORT_FEAT_POWER to usb_hub_set_port_power()
- Power sequencing state removed again in favor of state tracking by
  pwrseq subsystem
- Power sequencing descriptor again separately requested for HS and SS
  ports
- Dropped pwrseq_power_off() call before pwrseq_put(); the latter calls
  the former implicitly if the power state was left on
- Squashed DT binding revert and addition into one patch
- Link to v2:
  https://lore.kernel.org/all/20260610084053.2059858-1-wenst@chromium.org/


Major changes since v1:
- No longer adding the "index" parameter the power sequencing API
- Switched from OF graph to fwnode graph APIs
- Tie "port@" node to usb_port device, and use this device as consumer
  to acquire power sequencing descriptor
- Power sequencing descriptor now only tied to USB 2.0 port to avoid
  double reference
- Power sequencing state tracking added
- Link to v1
  https://lore.kernel.org/all/20260515090149.3169406-1-wenst@chromium.org/

The series is based on next-20260708.


Patch 1 and 2 add new fwnode graph helpers. These are used by the patch
5 and 8, respectively.

Patch 3 adds a new pwrseq_power_is_on() for a power sequencer consumer
to query the current request state. Note that this is not the _actual_
state.

Patch 4 reworks the USB hub driver to return the actual error code from
hub_configure() in hub_probe(). This is needed in the next patch to
correctly return -EPROBE_DEFER returned by pwrseq_get() in patch 9.

Patch 5 makes the USB port device associated with a "port@" fwnode if
available. This depends on patch 1.

Patch 6 moves some |struct usb_port| related stuff from hub.c and hub.h
to port.c and port.h. No actual code or functionality is changed.

Patch 7 changes usb_port_is_power_on() so that |struct usb_port*| is
passed in instead of |struct usb_hub*|. This patch does not change any
functionality.

Patch 8 changes some USB hub port power control code that directly
toggles USB_PORT_FEAT_POWER to use usb_hub_set_port_power().

Patch 9 lets the USB hub driver look for power sequencers for each port.
Currently this only works for M.2 E-key connections, but it could be
extended to cover other cases. It should also make port reset via turning
off the port VBUS work, even when VBUS is not directly controlled by the
hub. This depends on patch 2 and 3 for the new helpers.

Patch 10 reverts an incorrectly modeled OF graph connection for the
MediaTek XHCI controller and adds a proper representation.

Patch 11 adds matching pwrseq consumer by "port@" node to the M.2 slot
driver. This is only used for the USB target, but there is no attempt
to differentiate the connection type. The driver simply tries matching
the "port@" node first, then falling back to the port parent or device's
node.

Patch 12 reworks the power sequencing targets for the E-key connector in
the pcie-m2 driver to add targets for USB and SDIO. The former is used
later on in this series.

Patches 13 and 14 enable the M.2 E-key slots (or slot-like integration)
found on MT8195 and MT8188 MediaTek-based Chromebooks. 


This series unfortunately spans multiple trees. The way I see it:

  - Patches 1 and 2 go through the driver core, and an immutable tag is
    provided to be merged together with the USB patches.

  - Patch 3 has an ack from Bartosz, and goes through the USB tree. But
    Bartosz also wants an immutable branch/tag to have a copy in the
    pwrseq tree.

  - Patches 4 through 10 (all the USB related ones) go through the USB
    tree, along with the dependencies above.

  - Patches 11 and 12 go through the power sequencing tree.

  - Patches 13 and 14 (device tree only) go through the soc tree via the
    mediatek tree.

Some of us discussed v1 at Embedded Recipes, and I believe Bartosz, Mani
and I agree on this approach. The debate is likely going to be on
whether this should be integrated into the USB core or not. I believe it
should, so that the power sequencing timing is tied to the USB port
being brought up. I do have a fallback option of just enabling the USB
power sequencing target inside the M.2 slot driver if a valid OF graph
connection is seen. But this is less desired for the reason given above.

Please have a look and share your thoughts.


Thanks
ChenYu


[1] https://lore.kernel.org/all/20260326-pci-m2-e-v7-0-43324a7866e6@oss.qualcomm.com/

Chen-Yu Tsai (14):
  device property: Add fwnode_graph_get_port_by_id()
  device property: Add fwnode_graph_get_next_port_endpoint()
  power: sequencing: Add pwrseq_power_is_on()
  usb: hub: Return actual error from hub_configure() in hub_probe()
  usb: hub: Associate port@ fwnode with USB port device
  usb: core: Move struct usb_port and related APIs to port.h
  usb: hub: Pass |struct usb_port*| to usb_port_is_power_on()
  usb: hub: Use usb_hub_set_port_power() to control port power
    everywhere
  usb: hub: Power on connected M.2 E-key connectors with power
    sequencing API
  dt-bindings: usb: mediatek,mtk-xhci: Switch to ports for USB
    connections
  power: sequencing: pcie-m2: support matching on remote "port" node
  power: sequencing: pcie-m2: Add usb and sdio targets for E-key
    connector
  arm64: dts: mediatek: mt8195-cherry: Add M.2 E-key slot
  arm64: dts: mediatek: mt8188-geralt: Add WiFi/BT as M.2 E-key slot

 .../bindings/usb/mediatek,mtk-xhci.yaml       | 17 +++-
 .../boot/dts/mediatek/mt8188-geralt.dtsi      | 92 ++++++++++++++++++-
 .../boot/dts/mediatek/mt8195-cherry.dtsi      | 73 ++++++++++++++-
 drivers/base/property.c                       | 47 ++++++++++
 drivers/power/sequencing/core.c               | 18 ++++
 drivers/power/sequencing/pwrseq-pcie-m2.c     | 52 ++++++++---
 drivers/usb/Kconfig                           |  1 +
 drivers/usb/core/hub.c                        | 71 +++++++-------
 drivers/usb/core/hub.h                        | 56 ++---------
 drivers/usb/core/port.c                       | 92 ++++++++++++++++++-
 drivers/usb/core/port.h                       | 68 ++++++++++++++
 include/linux/property.h                      |  3 +
 include/linux/pwrseq/consumer.h               |  6 ++
 13 files changed, 483 insertions(+), 113 deletions(-)
 create mode 100644 drivers/usb/core/port.h

-- 
2.55.0.795.g602f6c329a-goog

[PATCH v4 01/14] device property: Add fwnode_graph_get_port_by_id()

[Chen-Yu Tsai]

In some cases the driver needs a reference to the port firmware node.
Once such case is the upcoming USB power sequencing integration. The
USB hub port is tied to the corresponding port firmware node if it
exists.

Provide a helper for this.

Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
---
Changes since v2:
- Moved "Return:" kernel-doc section to the end. (Andy)

Changes since v1:
- New patch
---
 drivers/base/property.c  | 22 ++++++++++++++++++++++
 include/linux/property.h |  1 +
 2 files changed, 23 insertions(+)

diff --git a/drivers/base/property.c b/drivers/base/property.c
index 9387bb83eb54..3e3e19ef66a9 100644
--- a/drivers/base/property.c
+++ b/drivers/base/property.c
@@ -1346,6 +1346,28 @@ int fwnode_graph_parse_endpoint(const struct fwnode_handle *fwnode,
 }
 EXPORT_SYMBOL(fwnode_graph_parse_endpoint);
 
+/**
+ * fwnode_graph_get_port_by_id - get the port matching a given id
+ * @fwnode: parent fwnode_handle containing the graph
+ * @id: id of the port
+ *
+ * The caller is responsible for calling fwnode_handle_put() on the returned
+ * fwnode pointer.
+ *
+ * Return: A 'port' firmware node pointer with refcount incremented.
+ */
+struct fwnode_handle *fwnode_graph_get_port_by_id(struct fwnode_handle *fwnode, u32 id)
+{
+	struct fwnode_handle *ep;
+
+	ep = fwnode_graph_get_endpoint_by_id(fwnode, id, 0, FWNODE_GRAPH_ENDPOINT_NEXT);
+	if (!ep)
+		return NULL;
+
+	return fwnode_get_next_parent(ep);
+}
+EXPORT_SYMBOL_GPL(fwnode_graph_get_port_by_id);
+
 const void *device_get_match_data(const struct device *dev)
 {
 	return fwnode_call_ptr_op(dev_fwnode(dev), device_get_match_data, dev);
diff --git a/include/linux/property.h b/include/linux/property.h
index 14c304db4664..e04901c0bd8f 100644
--- a/include/linux/property.h
+++ b/include/linux/property.h
@@ -505,6 +505,7 @@ int fwnode_get_phy_mode(const struct fwnode_handle *fwnode);
 
 void __iomem *fwnode_iomap(struct fwnode_handle *fwnode, int index);
 
+struct fwnode_handle *fwnode_graph_get_port_by_id(struct fwnode_handle *fwnode, u32 id);
 struct fwnode_handle *fwnode_graph_get_next_endpoint(
 	const struct fwnode_handle *fwnode, struct fwnode_handle *prev);
 struct fwnode_handle *
-- 
2.55.0.795.g602f6c329a-goog

[PATCH v4 02/14] device property: Add fwnode_graph_get_next_port_endpoint()

[Chen-Yu Tsai]

Due to design constraints of the power sequencing API, the consumer
must first be sure that the other side is actually a provider, or it
will continually get -EPROBE_DEFER when requesting the power
sequencing descriptor.

In the upcoming USB power sequencing integration, the USB hub driver
first needs to check whether a graph connection exists, and whether
the other side of the connection is a supported connector type. The
USB port is tied to a "port" firmware node, and this new helper will
be used to get the endpoint under the known "port" firmware node.

Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
---
Changes since v2:
- Dropped unused |ep| variable
- Rewrote as do {} while()
- Dropped WARN() use
---
 drivers/base/property.c  | 25 +++++++++++++++++++++++++
 include/linux/property.h |  2 ++
 2 files changed, 27 insertions(+)

diff --git a/drivers/base/property.c b/drivers/base/property.c
index 3e3e19ef66a9..7e7ad3635806 100644
--- a/drivers/base/property.c
+++ b/drivers/base/property.c
@@ -1099,6 +1099,31 @@ int fwnode_irq_get_byname(const struct fwnode_handle *fwnode, const char *name)
 }
 EXPORT_SYMBOL(fwnode_irq_get_byname);
 
+/**
+ * fwnode_graph_get_next_port_endpoint - Get next endpoint firmware node in port
+ * @port: Pointer to the target port firmware node
+ * @prev: Previous endpoint node or %NULL to get the first
+ *
+ * The caller is responsible for calling fwnode_handle_put() on the returned
+ * fwnode pointer. Note that this function also puts a reference to @prev
+ * unconditionally.
+ *
+ * Return: an endpoint firmware node pointer or %NULL if no more endpoints
+ * are available.
+ */
+struct fwnode_handle *fwnode_graph_get_next_port_endpoint(const struct fwnode_handle *port,
+							  struct fwnode_handle *prev)
+{
+	do {
+		prev = fwnode_get_next_child_node(port, prev);
+		if (fwnode_name_eq(prev, "endpoint"))
+			break;
+	} while (prev);
+
+	return prev;
+}
+EXPORT_SYMBOL_GPL(fwnode_graph_get_next_port_endpoint);
+
 /**
  * fwnode_graph_get_next_endpoint - Get next endpoint firmware node
  * @fwnode: Pointer to the parent firmware node
diff --git a/include/linux/property.h b/include/linux/property.h
index e04901c0bd8f..931e703393cb 100644
--- a/include/linux/property.h
+++ b/include/linux/property.h
@@ -506,6 +506,8 @@ int fwnode_get_phy_mode(const struct fwnode_handle *fwnode);
 void __iomem *fwnode_iomap(struct fwnode_handle *fwnode, int index);
 
 struct fwnode_handle *fwnode_graph_get_port_by_id(struct fwnode_handle *fwnode, u32 id);
+struct fwnode_handle *fwnode_graph_get_next_port_endpoint(
+	const struct fwnode_handle *port, struct fwnode_handle *prev);
 struct fwnode_handle *fwnode_graph_get_next_endpoint(
 	const struct fwnode_handle *fwnode, struct fwnode_handle *prev);
 struct fwnode_handle *
-- 
2.55.0.795.g602f6c329a-goog

[PATCH v4 03/14] power: sequencing: Add pwrseq_power_is_on()

[Chen-Yu Tsai]

The power sequencing consumer API already does power on state tracking
internally. Expose the state to consumers through pwrseq_power_is_on()
so that they don't have to reimplement it locally.

Acked-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
---
Changes since v3:
- Added missing stub function for !POWER_SEQUENCING

Changes since v2:
- New patch

Needs to go in with "usb: hub: Power on connected M.2 E-key connectors"
as it is a build time dependency.

Side question: I wonder if making the !POWER_SEQUENCING return success
would make developers' lives better? At least that is what the clk and
regulator consumer APIs do.
---
 drivers/power/sequencing/core.c | 18 ++++++++++++++++++
 include/linux/pwrseq/consumer.h |  6 ++++++
 2 files changed, 24 insertions(+)

diff --git a/drivers/power/sequencing/core.c b/drivers/power/sequencing/core.c
index 02f42da91598..72b96d36920e 100644
--- a/drivers/power/sequencing/core.c
+++ b/drivers/power/sequencing/core.c
@@ -968,6 +968,24 @@ int pwrseq_power_off(struct pwrseq_desc *desc)
 }
 EXPORT_SYMBOL_GPL(pwrseq_power_off);
 
+/**
+ * pwrseq_power_is_on() - Queries the last requested state of the power sequencer.
+ * @desc: Descriptor referencing the power sequencer.
+ *
+ * This returns the last requested state of the power sequencer.
+ *
+ * Returns:
+ * On success, 1 for on and 0 for off; negative error number on failure.
+ */
+int pwrseq_power_is_on(struct pwrseq_desc *desc)
+{
+	if (!desc)
+		return -EINVAL;
+
+	return desc->powered_on;
+}
+EXPORT_SYMBOL_GPL(pwrseq_power_is_on);
+
 /**
  * pwrseq_to_device() - Get the pwrseq device pointer from a descriptor.
  * @desc: Descriptor referencing the power sequencer.
diff --git a/include/linux/pwrseq/consumer.h b/include/linux/pwrseq/consumer.h
index 3c907c9e1885..3c6122bd0205 100644
--- a/include/linux/pwrseq/consumer.h
+++ b/include/linux/pwrseq/consumer.h
@@ -22,6 +22,7 @@ devm_pwrseq_get(struct device *dev, const char *target);
 
 int pwrseq_power_on(struct pwrseq_desc *desc);
 int pwrseq_power_off(struct pwrseq_desc *desc);
+int pwrseq_power_is_on(struct pwrseq_desc *desc);
 
 struct device *pwrseq_to_device(struct pwrseq_desc *desc);
 
@@ -53,6 +54,11 @@ static inline int pwrseq_power_off(struct pwrseq_desc *desc)
 	return -ENOSYS;
 }
 
+static inline int pwrseq_power_is_on(struct pwrseq_desc *desc)
+{
+	return -ENOSYS;
+}
+
 static inline struct device *pwrseq_to_device(struct pwrseq_desc *desc)
 {
 	return NULL;
-- 
2.55.0.795.g602f6c329a-goog

[PATCH v4 04/14] usb: hub: Return actual error from hub_configure() in hub_probe()

[Chen-Yu Tsai]

The addition of power sequencing descriptor handling in the USB hub code
requires dealing with deferred probing from pwrseq_get(). The power
sequencing provider may not yet be available when the USB hub probes.

Return the actual error code from hub_configure() when it fails, so that
the driver core can notice the deferred probe request.

Also rewrite this section into the standard error handling pattern:

    if (error) {
        # handle error
        return error;
    }

    # do more work
    return 0;

Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
---
Changes since v2:
- Rewrite into standard error handling pattern

Changes since v1:
- Moved "int ret" declaration in hub_configure() over here from the next
  patch
---
 drivers/usb/core/hub.c | 14 ++++++++------
 1 file changed, 8 insertions(+), 6 deletions(-)

diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index 13264e86bc6d..fe10d72ef39d 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -1874,6 +1874,7 @@ static int hub_probe(struct usb_interface *intf, const struct usb_device_id *id)
 	struct usb_host_interface *desc;
 	struct usb_device *hdev;
 	struct usb_hub *hub;
+	int ret;
 
 	desc = intf->cur_altsetting;
 	hdev = interface_to_usbdev(intf);
@@ -2005,14 +2006,15 @@ static int hub_probe(struct usb_interface *intf, const struct usb_device_id *id)
 		usb_set_interface(hdev, 0, 0);
 	}
 
-	if (hub_configure(hub, &desc->endpoint[0].desc) >= 0) {
-		onboard_dev_create_pdevs(hdev, &hub->onboard_devs);
-
-		return 0;
+	ret = hub_configure(hub, &desc->endpoint[0].desc);
+	if (ret < 0) {
+		hub_disconnect(intf);
+		return ret;
 	}
 
-	hub_disconnect(intf);
-	return -ENODEV;
+	onboard_dev_create_pdevs(hdev, &hub->onboard_devs);
+
+	return 0;
 }
 
 static int
-- 
2.55.0.795.g602f6c329a-goog

[PATCH v4 05/14] usb: hub: Associate port@ fwnode with USB port device

[Chen-Yu Tsai]

When a USB hub port is connected to a connector in a firmware node
graph, the port itself has a node in the graph.

Associate the port's firmware node with the USB port's device,
usb_port::dev. This is used in later changes for the M.2 slot power
sequencing provider to match against the requesting port.

To avoid potential conflicts with ACPI firmware nodes and then causing
power management issues, only assign the firmware node if the hub's
firmware node is not an ACPI firmware node.

Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
---
Changes since v3:
- Added missing fwnode_handle_put()

Changes since v2:
- Skip assignment if hub firmware node is ACPI node
---
 drivers/usb/core/port.c | 14 ++++++++++++++
 1 file changed, 14 insertions(+)

diff --git a/drivers/usb/core/port.c b/drivers/usb/core/port.c
index b1364f0c384c..e8fb2acd77be 100644
--- a/drivers/usb/core/port.c
+++ b/drivers/usb/core/port.c
@@ -7,6 +7,7 @@
  * Author: Lan Tianyu <tianyu.lan@intel.com>
  */
 
+#include <linux/acpi.h>
 #include <linux/kstrtox.h>
 #include <linux/slab.h>
 #include <linux/string_choices.h>
@@ -358,6 +359,11 @@ static void usb_port_device_release(struct device *dev)
 {
 	struct usb_port *port_dev = to_usb_port(dev);
 
+	/*
+	 * At this point ACPI nodes and swnodes have been removed by
+	 * device_platform_notify_remove() in device_del().
+	 */
+	fwnode_handle_put(dev_fwnode(dev));
 	kfree(port_dev->req);
 	kfree(port_dev);
 }
@@ -780,6 +786,13 @@ int usb_hub_create_port_device(struct usb_hub *hub, int port1)
 	port_dev->dev.driver = &usb_port_driver;
 	dev_set_name(&port_dev->dev, "%s-port%d", dev_name(&hub->hdev->dev),
 			port1);
+	/*
+	 * ACPI FW nodes are associated later when device_register() happens.
+	 * Skip assigning one here to avoid potential conflicts.
+	 */
+	if (!is_acpi_node(dev_fwnode(&hdev->dev)))
+		device_set_node(&port_dev->dev,
+				fwnode_graph_get_port_by_id(dev_fwnode(&hdev->dev), port1));
 	mutex_init(&port_dev->status_lock);
 	retval = device_register(&port_dev->dev);
 	if (retval) {
@@ -852,6 +865,7 @@ int usb_hub_create_port_device(struct usb_hub *hub, int port1)
 
 void usb_hub_remove_port_device(struct usb_hub *hub, int port1)
 {
+	struct usb_device *hdev = hub->hdev;
 	struct usb_port *port_dev = hub->ports[port1 - 1];
 	struct usb_port *peer;
 
-- 
2.55.0.795.g602f6c329a-goog

[PATCH v4 06/14] usb: core: Move struct usb_port and related APIs to port.h

[Chen-Yu Tsai]

|struct usb_port| and its matching container_of() macro should live in
its own port.h, matching the split we have for .c files.

Move them as described. Also move usb_port_is_power_on(), since in the
next change its |struct usb_hub *| parameter will be changed to
|struct usb_port *|, and becomes a non-static function that only
references |struct usb_port|.

port.h is only included from hub.h, as a subsequent patch will directly
use fields from |struct usb_port| in a static inline helper in hub.h.
The USB internal headers don't have header guards to help with this.

Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
---
Changes since v3:
- New patch (Andy)
---
 drivers/usb/core/hub.c  | 16 ----------
 drivers/usb/core/hub.h  | 48 ++---------------------------
 drivers/usb/core/port.c | 16 ++++++++++
 drivers/usb/core/port.h | 68 +++++++++++++++++++++++++++++++++++++++++
 4 files changed, 86 insertions(+), 62 deletions(-)
 create mode 100644 drivers/usb/core/port.h

diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index fe10d72ef39d..6f576efa37b1 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -3239,22 +3239,6 @@ static bool hub_port_stop_enumerate(struct usb_hub *hub, int port1, int retries)
 	return port_dev->ignore_event;
 }
 
-/* Check if a port is power on */
-int usb_port_is_power_on(struct usb_hub *hub, unsigned int portstatus)
-{
-	int ret = 0;
-
-	if (hub_is_superspeed(hub->hdev)) {
-		if (portstatus & USB_SS_PORT_STAT_POWER)
-			ret = 1;
-	} else {
-		if (portstatus & USB_PORT_STAT_POWER)
-			ret = 1;
-	}
-
-	return ret;
-}
-
 static void usb_lock_port(struct usb_port *port_dev)
 		__acquires(&port_dev->status_lock)
 {
diff --git a/drivers/usb/core/hub.h b/drivers/usb/core/hub.h
index 9ebc5ef54a32..de524c6da9fc 100644
--- a/drivers/usb/core/hub.h
+++ b/drivers/usb/core/hub.h
@@ -15,7 +15,9 @@
 #include <linux/usb/ch11.h>
 #include <linux/usb/hcd.h>
 #include <linux/usb/typec.h>
+
 #include "usb.h"
+#include "port.h"
 
 struct usb_hub {
 	struct device		*intfdev;	/* the "interface" device */
@@ -78,51 +80,6 @@ struct usb_hub {
 	struct list_head        onboard_devs;
 };
 
-/**
- * struct usb port - kernel's representation of a usb port
- * @child: usb device attached to the port
- * @dev: generic device interface
- * @port_owner: port's owner
- * @peer: related usb2 and usb3 ports (share the same connector)
- * @connector: USB Type-C connector
- * @req: default pm qos request for hubs without port power control
- * @connect_type: port's connect type
- * @state: device state of the usb device attached to the port
- * @state_kn: kernfs_node of the sysfs attribute that accesses @state
- * @location: opaque representation of platform connector location
- * @status_lock: synchronize port_event() vs usb_port_{suspend|resume}
- * @portnum: port index num based one
- * @is_superspeed cache super-speed status
- * @usb3_lpm_u1_permit: whether USB3 U1 LPM is permitted.
- * @usb3_lpm_u2_permit: whether USB3 U2 LPM is permitted.
- * @early_stop: whether port initialization will be stopped earlier.
- * @ignore_event: whether events of the port are ignored.
- */
-struct usb_port {
-	struct usb_device *child;
-	struct device dev;
-	struct usb_dev_state *port_owner;
-	struct usb_port *peer;
-	struct typec_connector *connector;
-	struct dev_pm_qos_request *req;
-	enum usb_port_connect_type connect_type;
-	enum usb_device_state state;
-	struct kernfs_node *state_kn;
-	usb_port_location_t location;
-	struct mutex status_lock;
-	u32 over_current_count;
-	u8 portnum;
-	u32 quirks;
-	unsigned int early_stop:1;
-	unsigned int ignore_event:1;
-	unsigned int is_superspeed:1;
-	unsigned int usb3_lpm_u1_permit:1;
-	unsigned int usb3_lpm_u2_permit:1;
-};
-
-#define to_usb_port(_dev) \
-	container_of(_dev, struct usb_port, dev)
-
 extern int usb_hub_create_port_device(struct usb_hub *hub,
 		int port1);
 extern void usb_hub_remove_port_device(struct usb_hub *hub,
@@ -138,7 +95,6 @@ extern int usb_clear_port_feature(struct usb_device *hdev,
 		int port1, int feature);
 extern int usb_hub_port_status(struct usb_hub *hub, int port1,
 		u16 *status, u16 *change);
-extern int usb_port_is_power_on(struct usb_hub *hub, unsigned int portstatus);
 
 static inline bool hub_is_port_power_switchable(struct usb_hub *hub)
 {
diff --git a/drivers/usb/core/port.c b/drivers/usb/core/port.c
index e8fb2acd77be..206b9f9a5807 100644
--- a/drivers/usb/core/port.c
+++ b/drivers/usb/core/port.c
@@ -22,6 +22,22 @@ static int usb_port_block_power_off;
 
 static const struct attribute_group *port_dev_group[];
 
+/* Check if a port is power on */
+int usb_port_is_power_on(struct usb_hub *hub, unsigned int portstatus)
+{
+	int ret = 0;
+
+	if (hub_is_superspeed(hub->hdev)) {
+		if (portstatus & USB_SS_PORT_STAT_POWER)
+			ret = 1;
+	} else {
+		if (portstatus & USB_PORT_STAT_POWER)
+			ret = 1;
+	}
+
+	return ret;
+}
+
 static bool usb_port_allow_power_off(struct usb_device *hdev,
 				     struct usb_hub *hub,
 				     struct usb_port *port_dev)
diff --git a/drivers/usb/core/port.h b/drivers/usb/core/port.h
new file mode 100644
index 000000000000..f43f6b3b6b1f
--- /dev/null
+++ b/drivers/usb/core/port.h
@@ -0,0 +1,68 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * usb hub driver head file
+ *
+ * Copyright (C) 1999 Linus Torvalds
+ * Copyright (C) 1999 Johannes Erdfelt
+ * Copyright (C) 1999 Gregory P. Smith
+ * Copyright (C) 2001 Brad Hards (bhards@bigpond.net.au)
+ * Copyright (C) 2012 Intel Corp (tianyu.lan@intel.com)
+ *
+ *  move struct usb_port to this file.
+ */
+
+#include <linux/container_of.h>
+#include <linux/device.h>
+#include <linux/mutex_types.h>
+#include <linux/usb.h>
+
+#include <uapi/linux/usb/ch9.h>
+
+/**
+ * struct usb port - kernel's representation of a usb port
+ * @child: usb device attached to the port
+ * @dev: generic device interface
+ * @port_owner: port's owner
+ * @peer: related usb2 and usb3 ports (share the same connector)
+ * @connector: USB Type-C connector
+ * @req: default pm qos request for hubs without port power control
+ * @connect_type: port's connect type
+ * @state: device state of the usb device attached to the port
+ * @state_kn: kernfs_node of the sysfs attribute that accesses @state
+ * @location: opaque representation of platform connector location
+ * @status_lock: synchronize port_event() vs usb_port_{suspend|resume}
+ * @portnum: port index num based one
+ * @is_superspeed cache super-speed status
+ * @usb3_lpm_u1_permit: whether USB3 U1 LPM is permitted.
+ * @usb3_lpm_u2_permit: whether USB3 U2 LPM is permitted.
+ * @early_stop: whether port initialization will be stopped earlier.
+ * @ignore_event: whether events of the port are ignored.
+ */
+struct usb_port {
+	struct usb_device *child;
+	struct device dev;
+	struct usb_dev_state *port_owner;
+	struct usb_port *peer;
+	struct typec_connector *connector;
+	struct dev_pm_qos_request *req;
+	enum usb_port_connect_type connect_type;
+	enum usb_device_state state;
+	struct kernfs_node *state_kn;
+	usb_port_location_t location;
+	struct mutex status_lock;
+	u32 over_current_count;
+	u8 portnum;
+	u32 quirks;
+	unsigned int early_stop:1;
+	unsigned int ignore_event:1;
+	unsigned int is_superspeed:1;
+	unsigned int usb3_lpm_u1_permit:1;
+	unsigned int usb3_lpm_u2_permit:1;
+};
+
+#define to_usb_port(_dev) \
+	container_of(_dev, struct usb_port, dev)
+
+struct usb_hub;
+
+extern int usb_port_is_power_on(struct usb_hub *hub, unsigned int portstatus);
-- 
2.55.0.795.g602f6c329a-goog

[PATCH v4 07/14] usb: hub: Pass |struct usb_port*| to usb_port_is_power_on()

[Chen-Yu Tsai]

usb_port_is_power_on() currently takes |struct usb_hub*|, but only needs
it to tell if the hub/port is SuperSpeed or not.

In a subsequent change, usb_port_is_power_on() needs access to a pwrseq
state tracking field in |struct usb_port|. Either structure can be used
to identify whether a port/hub is SuperSpeed or not, as the field in
|struct usb_port| is inherited from the hub:

    port->is_superspeed = hub_is_superspeed(hub)

Replace usb_port_is_power_on()'s |struct usb_hub*| parameter with
|struct usb_port*| so a subsequent change can use it.

Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
---
Changes since v3:
- Adapted to move of usb_port_is_power_on() to port.c and port.h
---
 drivers/usb/core/hub.c  | 7 ++++---
 drivers/usb/core/port.c | 6 +++---
 drivers/usb/core/port.h | 4 +---
 3 files changed, 8 insertions(+), 9 deletions(-)

diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index 6f576efa37b1..c7fa73673582 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -3290,7 +3290,7 @@ static int check_port_resume_type(struct usb_device *udev,
 	}
 	/* Is the device still present? */
 	else if (status || port_is_suspended(hub, portstatus) ||
-			!usb_port_is_power_on(hub, portstatus)) {
+			!usb_port_is_power_on(port_dev, portstatus)) {
 		if (status >= 0)
 			status = -ENODEV;
 	} else if (!(portstatus & USB_PORT_STAT_CONNECTION)) {
@@ -3732,12 +3732,13 @@ static int wait_for_connected(struct usb_device *udev,
 		struct usb_hub *hub, int port1,
 		u16 *portchange, u16 *portstatus)
 {
+	struct usb_port *port_dev = hub->ports[port1 - 1];
 	int status = 0, delay_ms = 0;
 
 	while (delay_ms < 2000) {
 		if (status || *portstatus & USB_PORT_STAT_CONNECTION)
 			break;
-		if (!usb_port_is_power_on(hub, *portstatus)) {
+		if (!usb_port_is_power_on(port_dev, *portstatus)) {
 			status = -ENODEV;
 			break;
 		}
@@ -5433,7 +5434,7 @@ static void hub_port_connect(struct usb_hub *hub, int port1, u16 portstatus,
 		 * but only if the port isn't owned by someone else.
 		 */
 		if (hub_is_port_power_switchable(hub)
-				&& !usb_port_is_power_on(hub, portstatus)
+				&& !usb_port_is_power_on(port_dev, portstatus)
 				&& !port_dev->port_owner)
 			set_port_feature(hdev, port1, USB_PORT_FEAT_POWER);
 
diff --git a/drivers/usb/core/port.c b/drivers/usb/core/port.c
index 206b9f9a5807..f3e4d6a31798 100644
--- a/drivers/usb/core/port.c
+++ b/drivers/usb/core/port.c
@@ -23,11 +23,11 @@ static int usb_port_block_power_off;
 static const struct attribute_group *port_dev_group[];
 
 /* Check if a port is power on */
-int usb_port_is_power_on(struct usb_hub *hub, unsigned int portstatus)
+int usb_port_is_power_on(struct usb_port *port, unsigned int portstatus)
 {
 	int ret = 0;
 
-	if (hub_is_superspeed(hub->hdev)) {
+	if (port->is_superspeed) {
 		if (portstatus & USB_SS_PORT_STAT_POWER)
 			ret = 1;
 	} else {
@@ -114,7 +114,7 @@ static ssize_t disable_show(struct device *dev,
 	}
 
 	usb_hub_port_status(hub, port1, &portstatus, &unused);
-	disabled = !usb_port_is_power_on(hub, portstatus);
+	disabled = !usb_port_is_power_on(port_dev, portstatus);
 
  out_hdev_lock:
 	usb_unlock_device(hdev);
diff --git a/drivers/usb/core/port.h b/drivers/usb/core/port.h
index f43f6b3b6b1f..22f9973638d7 100644
--- a/drivers/usb/core/port.h
+++ b/drivers/usb/core/port.h
@@ -63,6 +63,4 @@ struct usb_port {
 #define to_usb_port(_dev) \
 	container_of(_dev, struct usb_port, dev)
 
-struct usb_hub;
-
-extern int usb_port_is_power_on(struct usb_hub *hub, unsigned int portstatus);
+extern int usb_port_is_power_on(struct usb_port *port, unsigned int portstatus);
-- 
2.55.0.795.g602f6c329a-goog

[PATCH v4 08/14] usb: hub: Use usb_hub_set_port_power() to control port power everywhere

[Chen-Yu Tsai]

There are still some instances in the USB hub driver where port power is
directly controlled by toggling the USB_PORT_FEAT_POWER feature flag.

Switch these instances over to usb_hub_set_port_power() so that only one
unified function to do this exists. This makes adding external power
control with the power sequencing API easier and consistently applied.

Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
---
Changes since v2:
- New patch
---
 drivers/usb/core/hub.c | 9 +++------
 1 file changed, 3 insertions(+), 6 deletions(-)

diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index c7fa73673582..369280a217cc 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -975,11 +975,8 @@ static void hub_power_on(struct usb_hub *hub, bool do_delay)
 		dev_dbg(hub->intfdev, "trying to enable port power on "
 				"non-switchable hub\n");
 	for (port1 = 1; port1 <= hub->hdev->maxchild; port1++)
-		if (test_bit(port1, hub->power_bits))
-			set_port_feature(hub->hdev, port1, USB_PORT_FEAT_POWER);
-		else
-			usb_clear_port_feature(hub->hdev, port1,
-						USB_PORT_FEAT_POWER);
+		usb_hub_set_port_power(hub->hdev, hub, port1,
+				       test_bit(port1, hub->power_bits));
 	if (do_delay)
 		msleep(hub_power_on_good_delay(hub));
 }
@@ -5436,7 +5433,7 @@ static void hub_port_connect(struct usb_hub *hub, int port1, u16 portstatus,
 		if (hub_is_port_power_switchable(hub)
 				&& !usb_port_is_power_on(port_dev, portstatus)
 				&& !port_dev->port_owner)
-			set_port_feature(hdev, port1, USB_PORT_FEAT_POWER);
+			usb_hub_set_port_power(hdev, hub, port1, true);
 
 		if (portstatus & USB_PORT_STAT_ENABLE)
 			goto done;
-- 
2.55.0.795.g602f6c329a-goog

[PATCH v4 09/14] usb: hub: Power on connected M.2 E-key connectors with power sequencing API

[Chen-Yu Tsai]

The new M.2 E-key connector can have a USB connection. For the USB device
on this connector to work, its power must be enabled and the W_DISABLE2#
signal deasserted. The connector driver handles this and provides a
toggle over the power sequencing API.

This feature currently only supports a directly connected (no mux in
between) M.2 E-key connector. Existing USB connector types are not
covered. The USB A connector was recently added to the onboard devices
driver. USB B connectors have historically been managed by the USB
gadget or dual-role device controller drivers. USB C connectors are
handled by TCPM drivers.

The power sequencing API does not know whether a power sequence provider
is not needed or not available yet, so we only request it for connectors
that we know need it, which at this time is just the E-key connector.

On the USB side, the port firmware node (if present) is tied to the
usb_port device. This device is used to acquire the power sequencing
descriptor. This allows the provider to tell the different ports on one
hub apart.

This feature is not implemented in the onboard USB devices driver. The
power sequencing API expects the consumer device to make the request,
but there is no device node to instantiate a platform device to tie
the driver to. The connector is not a child node of the USB host or
hub, and the graph connection is from a USB port to the connector.
And the connector itself already has a driver.

Power sequencing is not directly enabled in the connector driver as
that would completely decouple the timing of it from the USB subsystem.
It would not be possible for the USB subsystem to toggle the power
for a power cycle or to disable the port.

Also rewrite the existing set_bit() and clear_bit() branches with
assign_bit() to make it cleaner.

Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
---
Changes since v3:
- Adapted to move of usb_port_is_power_on() to port.c and port.h
- Simplified usb_hub_set_port_pwrseq() (Andy)
- Renamed usb_hub_set_port_pwrseq()'s "set" parameter to "on"
- Dropped usb_hub_restore_port_pwrseq() (use usb_hub_set_port_pwrseq()
  with inverted argument)
- Fixed off-by-one access in hub_is_port_power_switchable() (Sashiko)
- Assign retval from dev_err_probe() instead of the other way around (Andy)
- Clear hub->ports[port1 - 1] in USB port error and remove paths to
  avoid other threads from accidental UAF while the USB hub device is
  being unwound (Sashiko)
- Short-circuit out of helpers if !IS_ENABLED(CONFIG_POWER_SEQUENCING)
  to avoid errors from stub functions (Sashiko)

Changes since v2:
- Expanded subject to mention power sequencing API
- Dropped commit message bit about power sequencing Kconfig symbol change
  to bool
- Added optional dependency on POWER_SEQUENCING to USB
- Split out pwrseq_power_*() calls into separate helpers
- Rewrote set_bit() and clear_bit() branches with assign_bit()
- Dropped the pwrseq_power_off() before pwrseq_put(): pwrseq_put() does it
  automatically.
- Removed pwrseq_power_on() from usb_hub_create_port_device(); it will
  get called through usb_hub_set_port_power() in hub_activate().
- Added checks for port->pwrseq in hub_is_port_power_switchable()

- Use separate pwrseq descriptors for HighSpeed and SuperSpeed ports.
  This makes things simpler. On the other hand to power cycle a port
  userspace needs to toggle it on both the HS and SS ports together.
- Dropped pwrseq state tracking again
  The power sequencing consumer API already tracks the state internally;
  doing it again in |struct usb_port| is not necessary especially now
  that the descriptors aren't shared.

It's unclear to me how actual hubs reconcile USB_PORT_FEAT_POWER settings
from the HS side and SS side. One hub chip vendor said that VBUS_EN for
a port is on if the flag is set on either side; however actually testing
on one of their hubs showed that VBUS was cut as soon as the flag is
cleared on the HS port. Maybe it could be different if a SS device was
connected? That scenario was not tested. Testing on another retail
bought hub seemed to work exactly as described though: USB_PORT_FEAT_POWER
needed to be clear on both HS and SS ports to turn off VBUS.

Under this scheme, I'm not sure how the power cycle in hub_port_connect()
would work correctly.

- Link to v2:
  https://lore.kernel.org/all/20260610084053.2059858-1-wenst@chromium.org/

Changes since v1:
- Switch to fwnode instead of OF
- Tie port@ fwnode to usb_port device
- Move remote node compatible checking to separate helper
- Use usb_port device to request power sequencing descriptor
- Drop "index" parameter from pwrseq_get()
- Do not get pwrseq descriptor for SuperSpeed port; share one for one
  physical port
- Add pwrseq state tracking
- Link to v1:
  https://lore.kernel.org/all/20260515090149.3169406-1-wenst@chromium.org/
---
 drivers/usb/Kconfig     |  1 +
 drivers/usb/core/hub.c  | 25 +++++++++++++----
 drivers/usb/core/hub.h  |  8 +++++-
 drivers/usb/core/port.c | 62 +++++++++++++++++++++++++++++++++++++++--
 drivers/usb/core/port.h |  2 ++
 5 files changed, 90 insertions(+), 8 deletions(-)

diff --git a/drivers/usb/Kconfig b/drivers/usb/Kconfig
index abf8c6cdea9e..ef1959363fb1 100644
--- a/drivers/usb/Kconfig
+++ b/drivers/usb/Kconfig
@@ -44,6 +44,7 @@ config USB_ARCH_HAS_HCD
 config USB
 	tristate "Support for Host-side USB"
 	depends on USB_ARCH_HAS_HCD
+	depends on POWER_SEQUENCING if POWER_SEQUENCING
 	select GENERIC_ALLOCATOR
 	select USB_COMMON
 	select NLS  # for UTF-8 strings
diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index 369280a217cc..4f7a1945db7f 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -32,6 +32,7 @@
 #include <linux/mutex.h>
 #include <linux/random.h>
 #include <linux/pm_qos.h>
+#include <linux/pwrseq/consumer.h>
 #include <linux/kobject.h>
 
 #include <linux/bitfield.h>
@@ -871,6 +872,16 @@ static void hub_tt_work(struct work_struct *work)
 	spin_unlock_irqrestore(&hub->tt.lock, flags);
 }
 
+static int usb_hub_set_port_pwrseq(struct usb_port *port, bool on)
+{
+	if (!IS_ENABLED(CONFIG_POWER_SEQUENCING))
+		return 0;
+
+	if (on)
+		return pwrseq_power_on(port->pwrseq);
+	return pwrseq_power_off(port->pwrseq);
+}
+
 /**
  * usb_hub_set_port_power - control hub port's power state
  * @hdev: USB device belonging to the usb hub
@@ -886,20 +897,24 @@ static void hub_tt_work(struct work_struct *work)
 int usb_hub_set_port_power(struct usb_device *hdev, struct usb_hub *hub,
 			   int port1, bool set)
 {
+	struct usb_port *pwrseq_port = hub->ports[port1 - 1];
 	int ret;
 
+	ret = usb_hub_set_port_pwrseq(pwrseq_port, set);
+	if (ret)
+		return ret;
+
 	if (set)
 		ret = set_port_feature(hdev, port1, USB_PORT_FEAT_POWER);
 	else
 		ret = usb_clear_port_feature(hdev, port1, USB_PORT_FEAT_POWER);
 
-	if (ret)
+	if (ret) {
+		usb_hub_set_port_pwrseq(pwrseq_port, !set);
 		return ret;
+	}
 
-	if (set)
-		set_bit(port1, hub->power_bits);
-	else
-		clear_bit(port1, hub->power_bits);
+	assign_bit(port1, hub->power_bits, set);
 	return 0;
 }
 
diff --git a/drivers/usb/core/hub.h b/drivers/usb/core/hub.h
index de524c6da9fc..7277c38c9e62 100644
--- a/drivers/usb/core/hub.h
+++ b/drivers/usb/core/hub.h
@@ -103,7 +103,13 @@ static inline bool hub_is_port_power_switchable(struct usb_hub *hub)
 	if (!hub)
 		return false;
 	hcs = hub->descriptor->wHubCharacteristics;
-	return (le16_to_cpu(hcs) & HUB_CHAR_LPSM) < HUB_CHAR_NO_LPSM;
+	if ((le16_to_cpu(hcs) & HUB_CHAR_LPSM) < HUB_CHAR_NO_LPSM)
+		return true;
+	/* check for controllable external power sequencers */
+	for (unsigned int i = 0; i < hub->hdev->maxchild; i++)
+		if (hub->ports[i] && hub->ports[i]->pwrseq)
+			return true;
+	return false;
 }
 
 static inline int hub_is_superspeed(struct usb_device *hdev)
diff --git a/drivers/usb/core/port.c b/drivers/usb/core/port.c
index f3e4d6a31798..dfb9f4bcd612 100644
--- a/drivers/usb/core/port.c
+++ b/drivers/usb/core/port.c
@@ -8,11 +8,14 @@
  */
 
 #include <linux/acpi.h>
+#include <linux/cleanup.h>
 #include <linux/kstrtox.h>
 #include <linux/slab.h>
 #include <linux/string_choices.h>
 #include <linux/sysfs.h>
 #include <linux/pm_qos.h>
+#include <linux/property.h>
+#include <linux/pwrseq/consumer.h>
 #include <linux/component.h>
 #include <linux/usb/of.h>
 
@@ -35,7 +38,14 @@ int usb_port_is_power_on(struct usb_port *port, unsigned int portstatus)
 			ret = 1;
 	}
 
-	return ret;
+	/* stub functions return error */
+	if (!IS_ENABLED(CONFIG_POWER_SEQUENCING))
+		return ret;
+
+	if (!port->pwrseq)
+		return ret;
+
+	return ret && pwrseq_power_is_on(port->pwrseq);
 }
 
 static bool usb_port_allow_power_off(struct usb_device *hdev,
@@ -45,6 +55,9 @@ static bool usb_port_allow_power_off(struct usb_device *hdev,
 	if (hub_is_port_power_switchable(hub))
 		return true;
 
+	if (port_dev->pwrseq)
+		return true;
+
 	if (!IS_ENABLED(CONFIG_ACPI))
 		return false;
 
@@ -770,6 +783,39 @@ static const struct component_ops connector_ops = {
 	.unbind = connector_unbind,
 };
 
+static bool port_pwrseq_is_supported(struct usb_port *port_dev)
+{
+	struct device *dev = &port_dev->dev;
+	struct fwnode_handle *port = dev->fwnode;
+	struct fwnode_handle *ep __free(fwnode_handle) =
+			fwnode_graph_get_next_port_endpoint(port, NULL);
+	if (!ep)
+		return false;
+
+	struct fwnode_handle *remote __free(fwnode_handle) =
+			fwnode_graph_get_remote_port_parent(ep);
+	if (!remote)
+		return false;
+
+	if (!fwnode_device_is_compatible(remote, "pcie-m2-e-connector")) {
+		dev_dbg(dev, "remote endpoint %pfw is not a supported connector", remote);
+		return false;
+	}
+
+	return true;
+}
+
+static struct pwrseq_desc *usb_hub_port_pwrseq_get(struct usb_port *port_dev)
+{
+	if (!IS_ENABLED(CONFIG_POWER_SEQUENCING))
+		return NULL;
+
+	if (!port_pwrseq_is_supported(port_dev))
+		return NULL;
+
+	return pwrseq_get(&port_dev->dev, "usb");
+}
+
 int usb_hub_create_port_device(struct usb_hub *hub, int port1)
 {
 	struct usb_port *port_dev;
@@ -813,6 +859,7 @@ int usb_hub_create_port_device(struct usb_hub *hub, int port1)
 	retval = device_register(&port_dev->dev);
 	if (retval) {
 		put_device(&port_dev->dev);
+		hub->ports[port1 - 1] = NULL;
 		return retval;
 	}
 
@@ -830,10 +877,17 @@ int usb_hub_create_port_device(struct usb_hub *hub, int port1)
 		goto err_put_kn;
 	}
 
+	port_dev->pwrseq = usb_hub_port_pwrseq_get(port_dev);
+	if (IS_ERR(port_dev->pwrseq)) {
+		retval = dev_err_probe(&port_dev->dev, PTR_ERR(port_dev->pwrseq),
+				       "failed to get power sequencing descriptor\n");
+		goto err_put_kn;
+	}
+
 	retval = component_add(&port_dev->dev, &connector_ops);
 	if (retval) {
 		dev_warn(&port_dev->dev, "failed to add component\n");
-		goto err_put_kn;
+		goto err_put_pwrseq;
 	}
 
 	find_and_link_peer(hub, port1);
@@ -871,10 +925,13 @@ int usb_hub_create_port_device(struct usb_hub *hub, int port1)
 	}
 	return 0;
 
+err_put_pwrseq:
+	pwrseq_put(port_dev->pwrseq);
 err_put_kn:
 	sysfs_put(port_dev->state_kn);
 err_unregister:
 	device_unregister(&port_dev->dev);
+	hub->ports[port1 - 1] = NULL;
 
 	return retval;
 }
@@ -888,6 +945,7 @@ void usb_hub_remove_port_device(struct usb_hub *hub, int port1)
 	peer = port_dev->peer;
 	if (peer)
 		unlink_peers(port_dev, peer);
+	pwrseq_put(port_dev->pwrseq);
 	component_del(&port_dev->dev, &connector_ops);
 	sysfs_put(port_dev->state_kn);
 	device_unregister(&port_dev->dev);
diff --git a/drivers/usb/core/port.h b/drivers/usb/core/port.h
index 22f9973638d7..f21d54de1426 100644
--- a/drivers/usb/core/port.h
+++ b/drivers/usb/core/port.h
@@ -25,6 +25,7 @@
  * @port_owner: port's owner
  * @peer: related usb2 and usb3 ports (share the same connector)
  * @connector: USB Type-C connector
+ * @pwrseq: power sequencing descriptor for the port
  * @req: default pm qos request for hubs without port power control
  * @connect_type: port's connect type
  * @state: device state of the usb device attached to the port
@@ -44,6 +45,7 @@ struct usb_port {
 	struct usb_dev_state *port_owner;
 	struct usb_port *peer;
 	struct typec_connector *connector;
+	struct pwrseq_desc *pwrseq;
 	struct dev_pm_qos_request *req;
 	enum usb_port_connect_type connect_type;
 	enum usb_device_state state;
-- 
2.55.0.795.g602f6c329a-goog

[PATCH v4 10/14] dt-bindings: usb: mediatek,mtk-xhci: Switch to ports for USB connections

[Chen-Yu Tsai]

This reverts commit 454a1e3cd36c113341d7b71e8e691c6e47ab4a8a.

MediaTek's XHCI implementation supports both USB 2.0 High Speed (HS)
and USB 3.x Super Speed (SS). The block can also be synthesized with
either HS-only capability or HS+SS capability. The SSUSB controller
handles the device or gadget mode. Saying that SSUSB handles the HS
portion is wrong.

For example, on the MT8195, the first two instances support both HS and
SS, while the latter two instances support only HS.

Switch to a "ports" sub-node for describing USB connections. Port 1 is
Super Speed if the controller is SS-capable, otherwise it is High Speed.
Port 2 is High Speed if SS-capable. This port mapping scheme directly
matches what the hardware returns in its capability registers.

Fixes: 454a1e3cd36c ("dt-bindings: usb: mediatek,mtk-xhci: Add port for SuperSpeed EP")
Cc: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
---
Changes since v1:
- Squashed DT binding revert and addition together
- Dropped reviewed-by from Bartosz
---
 .../bindings/usb/mediatek,mtk-xhci.yaml         | 17 +++++++++++++----
 1 file changed, 13 insertions(+), 4 deletions(-)

diff --git a/Documentation/devicetree/bindings/usb/mediatek,mtk-xhci.yaml b/Documentation/devicetree/bindings/usb/mediatek,mtk-xhci.yaml
index 231e6f35a986..d6c75bd20b78 100644
--- a/Documentation/devicetree/bindings/usb/mediatek,mtk-xhci.yaml
+++ b/Documentation/devicetree/bindings/usb/mediatek,mtk-xhci.yaml
@@ -107,10 +107,6 @@ properties:
       - description: USB3/SS(P) PHY
       - description: USB2/HS PHY
 
-  port:
-    $ref: /schemas/graph.yaml#/properties/port
-    description: Super Speed (SS) Output endpoint to a Type-C connector
-
   vusb33-supply:
     description: Regulator of USB AVDD3.3v
 
@@ -188,6 +184,19 @@ properties:
   "#size-cells":
     const: 0
 
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: Super Speed (SS) data bus if SS-capable;
+          otherwise High Speed (HS) data bus.
+
+      port@2:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: High Speed (HS) data bus if controller is SS-capable.
+
 patternProperties:
   "@[0-9a-f]{1}$":
     type: object
-- 
2.55.0.795.g602f6c329a-goog

[PATCH v4 11/14] power: sequencing: pcie-m2: support matching on remote "port" node

[Chen-Yu Tsai]

A USB hub can have multiple ports, and this driver needs to
differentiate which port is being matched to. The USB hub driver now
associates the "port" node with the usb_port device, so here we can
use the remote "port" node to check for a match. Then fall back to
the remote device node for the other connection types.

Also rewrite the existing "remote == dev_of_node(dev)" with
device_match_of_node() for consistency.

Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
---
Changes since v3:
- Drop redundant device node validity check; device_match_of_node()
  does it internally (Andy)

Changes since v2:
- Use device_match_of_node()
---
 drivers/power/sequencing/pwrseq-pcie-m2.c | 11 ++++++++++-
 1 file changed, 10 insertions(+), 1 deletion(-)

diff --git a/drivers/power/sequencing/pwrseq-pcie-m2.c b/drivers/power/sequencing/pwrseq-pcie-m2.c
index 83fe6a1396bc..733190175f84 100644
--- a/drivers/power/sequencing/pwrseq-pcie-m2.c
+++ b/drivers/power/sequencing/pwrseq-pcie-m2.c
@@ -175,9 +175,18 @@ static int pwrseq_pcie_m2_match(struct pwrseq_device *pwrseq,
 	 * parent matches the OF node of 'dev'.
 	 */
 	for_each_endpoint_of_node(ctx->of_node, endpoint) {
+		/* USB port devices are tied to the port nodes. */
+		struct device_node *remote_port __free(device_node) =
+				of_graph_get_remote_port(endpoint);
+
+		if (device_match_of_node(dev, remote_port))
+			return PWRSEQ_MATCH_OK;
+
+		/* Try the remote port parent for other types. */
 		struct device_node *remote __free(device_node) =
 				of_graph_get_remote_port_parent(endpoint);
-		if (remote && (remote == dev_of_node(dev)))
+
+		if (device_match_of_node(dev, remote))
 			return PWRSEQ_MATCH_OK;
 	}
 
-- 
2.55.0.795.g602f6c329a-goog

[PATCH v4 12/14] power: sequencing: pcie-m2: Add usb and sdio targets for E-key connector

[Chen-Yu Tsai]

The M.2 E-key connector allows either PCIe or SDIO for WiFi and USB or
UART for BT. Currently the driver only supports PCIe and UART.

Add power sequencing targets for SDIO and USB. To avoid adding a
complicated dependency tree, rename the existing power sequencing units
"pcie" and "uart" to "wifi" and "bt". The existing target names are left
untouched. The new "sdio" and "usb" targets just point to the renamed
"wifi" and "bt" units.

The "unit" names are internal to the power sequencing framework, and
should be confined to a single provider. The names are only
informational. Dependencies are tracked with pointers to other units.

The "target" names are the strings that the consumer uses to acquire a
descriptor with. As these remain the same, existing users will continue
to work.

Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
---
Changes since v2:
- Expand commit message
---
 drivers/power/sequencing/pwrseq-pcie-m2.c | 41 +++++++++++++++--------
 1 file changed, 27 insertions(+), 14 deletions(-)

diff --git a/drivers/power/sequencing/pwrseq-pcie-m2.c b/drivers/power/sequencing/pwrseq-pcie-m2.c
index 733190175f84..d67bf275480e 100644
--- a/drivers/power/sequencing/pwrseq-pcie-m2.c
+++ b/drivers/power/sequencing/pwrseq-pcie-m2.c
@@ -69,46 +69,46 @@ static const struct pwrseq_unit_data *pwrseq_pcie_m2_unit_deps[] = {
 	NULL
 };
 
-static int pwrseq_pci_m2_e_uart_enable(struct pwrseq_device *pwrseq)
+static int pwrseq_pci_m2_e_bt_enable(struct pwrseq_device *pwrseq)
 {
 	struct pwrseq_pcie_m2_ctx *ctx = pwrseq_device_get_drvdata(pwrseq);
 
 	return gpiod_set_value_cansleep(ctx->w_disable2_gpio, 0);
 }
 
-static int pwrseq_pci_m2_e_uart_disable(struct pwrseq_device *pwrseq)
+static int pwrseq_pci_m2_e_bt_disable(struct pwrseq_device *pwrseq)
 {
 	struct pwrseq_pcie_m2_ctx *ctx = pwrseq_device_get_drvdata(pwrseq);
 
 	return gpiod_set_value_cansleep(ctx->w_disable2_gpio, 1);
 }
 
-static const struct pwrseq_unit_data pwrseq_pcie_m2_e_uart_unit_data = {
-	.name = "uart-enable",
+static const struct pwrseq_unit_data pwrseq_pcie_m2_e_bt_unit_data = {
+	.name = "bt-enable",
 	.deps = pwrseq_pcie_m2_unit_deps,
-	.enable = pwrseq_pci_m2_e_uart_enable,
-	.disable = pwrseq_pci_m2_e_uart_disable,
+	.enable = pwrseq_pci_m2_e_bt_enable,
+	.disable = pwrseq_pci_m2_e_bt_disable,
 };
 
-static int pwrseq_pci_m2_e_pcie_enable(struct pwrseq_device *pwrseq)
+static int pwrseq_pci_m2_e_wifi_enable(struct pwrseq_device *pwrseq)
 {
 	struct pwrseq_pcie_m2_ctx *ctx = pwrseq_device_get_drvdata(pwrseq);
 
 	return gpiod_set_value_cansleep(ctx->w_disable1_gpio, 0);
 }
 
-static int pwrseq_pci_m2_e_pcie_disable(struct pwrseq_device *pwrseq)
+static int pwrseq_pci_m2_e_wifi_disable(struct pwrseq_device *pwrseq)
 {
 	struct pwrseq_pcie_m2_ctx *ctx = pwrseq_device_get_drvdata(pwrseq);
 
 	return gpiod_set_value_cansleep(ctx->w_disable1_gpio, 1);
 }
 
-static const struct pwrseq_unit_data pwrseq_pcie_m2_e_pcie_unit_data = {
-	.name = "pcie-enable",
+static const struct pwrseq_unit_data pwrseq_pcie_m2_e_wifi_unit_data = {
+	.name = "wifi-enable",
 	.deps = pwrseq_pcie_m2_unit_deps,
-	.enable = pwrseq_pci_m2_e_pcie_enable,
-	.disable = pwrseq_pci_m2_e_pcie_disable,
+	.enable = pwrseq_pci_m2_e_wifi_enable,
+	.disable = pwrseq_pci_m2_e_wifi_disable,
 };
 
 static const struct pwrseq_unit_data pwrseq_pcie_m2_m_pcie_unit_data = {
@@ -130,13 +130,24 @@ static int pwrseq_pcie_m2_e_pwup_delay(struct pwrseq_device *pwrseq)
 
 static const struct pwrseq_target_data pwrseq_pcie_m2_e_uart_target_data = {
 	.name = "uart",
-	.unit = &pwrseq_pcie_m2_e_uart_unit_data,
+	.unit = &pwrseq_pcie_m2_e_bt_unit_data,
 	.post_enable = pwrseq_pcie_m2_e_pwup_delay,
 };
 
+static const struct pwrseq_target_data pwrseq_pcie_m2_e_usb_target_data = {
+	.name = "usb",
+	.unit = &pwrseq_pcie_m2_e_bt_unit_data,
+};
+
 static const struct pwrseq_target_data pwrseq_pcie_m2_e_pcie_target_data = {
 	.name = "pcie",
-	.unit = &pwrseq_pcie_m2_e_pcie_unit_data,
+	.unit = &pwrseq_pcie_m2_e_wifi_unit_data,
+	.post_enable = pwrseq_pcie_m2_e_pwup_delay,
+};
+
+static const struct pwrseq_target_data pwrseq_pcie_m2_e_sdio_target_data = {
+	.name = "sdio",
+	.unit = &pwrseq_pcie_m2_e_wifi_unit_data,
 	.post_enable = pwrseq_pcie_m2_e_pwup_delay,
 };
 
@@ -147,7 +158,9 @@ static const struct pwrseq_target_data pwrseq_pcie_m2_m_pcie_target_data = {
 
 static const struct pwrseq_target_data *pwrseq_pcie_m2_e_targets[] = {
 	&pwrseq_pcie_m2_e_pcie_target_data,
+	&pwrseq_pcie_m2_e_sdio_target_data,
 	&pwrseq_pcie_m2_e_uart_target_data,
+	&pwrseq_pcie_m2_e_usb_target_data,
 	NULL
 };
 
-- 
2.55.0.795.g602f6c329a-goog

[PATCH v4 13/14] arm64: dts: mediatek: mt8195-cherry: Add M.2 E-key slot

[Chen-Yu Tsai]

The Mt8195 Cherry design features an M.2 E-key slot for WiFi/BT combo
cards. Only PCIe and USB are wired from the SoC to the slot, along with
some auxiliary signals.

Add the proper representation for it, replacing the PCIe wifi node and
vpcie3v3-supply property under the PCIe controller, and the vbus-supply
property under the xhci3 node.

Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
---
Changes since v2:
- Drop default GPIO output state from kill pins pinconfig
---
 .../boot/dts/mediatek/mt8195-cherry.dtsi      | 73 +++++++++++++++++--
 1 file changed, 68 insertions(+), 5 deletions(-)

diff --git a/arch/arm64/boot/dts/mediatek/mt8195-cherry.dtsi b/arch/arm64/boot/dts/mediatek/mt8195-cherry.dtsi
index ef7afc436aef..8d4cc30d91e4 100644
--- a/arch/arm64/boot/dts/mediatek/mt8195-cherry.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8195-cherry.dtsi
@@ -266,6 +266,47 @@ tboard_thermistor2: thermal-sensor-t2 {
 						120000 51
 						125000 44>;
 	};
+
+	wifi-bt-connector {
+		compatible = "pcie-m2-e-connector";
+		pinctrl-names = "default";
+		pinctrl-0 = <&m2_e_key_kill_pins>;
+		vpcie3v3-supply = <&pp3300_wlan>;
+		w-disable1-gpios = <&pio 61 GPIO_ACTIVE_LOW>;
+		w-disable2-gpios = <&pio 59 GPIO_ACTIVE_LOW>;
+		/* PCIe auxiliary signals wired to controller. */
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			/* PCIe for WiFi */
+			port@0 {
+				reg = <0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				wifi_ep: endpoint@0 {
+					reg = <0>;
+					remote-endpoint = <&pcie1_ep>;
+				};
+			};
+
+			/* USB for Bluetooth */
+			port@2 {
+				reg = <2>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				bt_ep: endpoint@0 {
+					reg = <0>;
+					remote-endpoint = <&usb3_ep>;
+				};
+			};
+
+			/* SDIO, UART and I2S not implemented */
+		};
+	};
 };
 
 &adsp {
@@ -791,14 +832,14 @@ pcie@0 {
 		reg = <0 0 0 0 0>;
 		device_type = "pci";
 		num-lanes = <1>;
-		vpcie3v3-supply = <&pp3300_wlan>;
 		#address-cells = <3>;
 		#size-cells = <2>;
 		ranges;
 
-		wifi@0 {
-			reg = <0 0 0 0 0>;
-			wakeup-source;
+		port {
+			pcie1_ep: endpoint {
+				remote-endpoint = <&wifi_ep>;
+			};
 		};
 	};
 };
@@ -1085,6 +1126,13 @@ pins-bus {
 		};
 	};
 
+	m2_e_key_kill_pins: m2-e-key-kill-pins {
+		pins-kill {
+			pinmux = <PINMUX_GPIO61__FUNC_GPIO61>,
+				 <PINMUX_GPIO59__FUNC_GPIO59>;
+		};
+	};
+
 	mmc0_pins_default: mmc0-default-pins {
 		pins-cmd-dat {
 			pinmux = <PINMUX_GPIO126__FUNC_MSDC0_DAT0>,
@@ -1637,9 +1685,24 @@ &xhci2 {
 &xhci3 {
 	/* MT7921's USB Bluetooth has issues with USB2 LPM */
 	usb2-lpm-disable;
-	vbus-supply = <&pp3300_wlan>;
 	vusb33-supply = <&mt6359_vusb_ldo_reg>;
 	status = "okay";
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			usb3_ep: endpoint@0 {
+				reg = <0>;
+				remote-endpoint = <&bt_ep>;
+			};
+		};
+	};
 };
 
 #include <arm/cros-ec-keyboard.dtsi>
-- 
2.55.0.795.g602f6c329a-goog

[PATCH v4 14/14] arm64: dts: mediatek: mt8188-geralt: Add WiFi/BT as M.2 E-key slot

[Chen-Yu Tsai]

The MT8188 Geralt design features a chip-on-board WiFi/BT solution. This
is a M.2 E-key WiFi/BT board layout directly inserted into the mainboard
design. The connections to the rest of the board are almost the same as
if it were a separate M.2 card. The only addition is the PMU_EN pin on
the chip; on M.2 cards this would be tied to the primary power source.

Model the chip-on-board WiFi/BT solution as a M.2 E-key slot with PCIe,
USB and auxiliary signals. The PMU_EN pin, which enables the internal
power controls and regulators, is modeled as a regulator fed by the
pp3300_wlan regulator. Since power sequencing is now correctly modeled
using the M.2 E-key slot, drop the "regulator-always-on" property one
pp3300_wlan regulator. Also drop the comment in xhci2 saying "MT7921's
power is controlled by PCIe".

Also drop the voltage range on the pp3300_wlan regulator. This
"regulator" is just a load switch and does not provide any regulation.

Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
---
Changes since v2:
- Drop default GPIO output state from kill pins pinconfig
---
 .../boot/dts/mediatek/mt8188-geralt.dtsi      | 92 ++++++++++++++++++-
 1 file changed, 88 insertions(+), 4 deletions(-)

diff --git a/arch/arm64/boot/dts/mediatek/mt8188-geralt.dtsi b/arch/arm64/boot/dts/mediatek/mt8188-geralt.dtsi
index dee946309121..73b5c0fdeae6 100644
--- a/arch/arm64/boot/dts/mediatek/mt8188-geralt.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8188-geralt.dtsi
@@ -88,13 +88,11 @@ pp3300_z1: regulator-pp3300-z1 {
 	pp3300_wlan: regulator-pp3300-wlan {
 		compatible = "regulator-fixed";
 		regulator-name = "pp3300_wlan";
-		regulator-always-on;
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
 		enable-active-high;
 		gpio = <&pio 12 GPIO_ACTIVE_HIGH>;
 		pinctrl-0 = <&wlan_en>;
 		pinctrl-names = "default";
+		/* load switch */
 		vin-supply = <&pp3300_z1>;
 	};
 
@@ -161,6 +159,17 @@ ppvar_mipi_disp_avee: regulator-ppvar-mipi-disp-avee {
 		vin-supply = <&pp5000_z1>;
 	};
 
+	/* PMU_EN pin controls internal regulators and power sequence */
+	wlan_pmu: regulator-wlan-pmu {
+		compatible = "regulator-fixed";
+		regulator-name = "wlan-pmu";
+		enable-active-high;
+		gpio = <&pio 145 GPIO_ACTIVE_HIGH>;
+		pinctrl-0 = <&wlan_pmu_en>;
+		pinctrl-names = "default";
+		vin-supply = <&pp3300_wlan>;
+	};
+
 	reserved_memory: reserved-memory {
 		#address-cells = <2>;
 		#size-cells = <2>;
@@ -195,6 +204,39 @@ adsp_dma_mem: memory@61000000 {
 			no-map;
 		};
 	};
+
+	wifi-bt-connector {
+		compatible = "pcie-m2-e-connector";
+		pinctrl-names = "default";
+		pinctrl-0 = <&m2_e_key_kill_pins>;
+		vpcie1v8-supply = <&mt6359_vcn18_ldo_reg>;
+		vpcie3v3-supply = <&wlan_pmu>;
+		w-disable1-gpios = <&pio 13 GPIO_ACTIVE_LOW>;
+		w-disable2-gpios = <&pio 14 GPIO_ACTIVE_LOW>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			/* PCIe for WiFi */
+			port@0 {
+				reg = <0>;
+
+				wifi_ep: endpoint {
+					remote-endpoint = <&pcie_ep>;
+				};
+			};
+
+			/* USB for Bluetooth */
+			port@2 {
+				reg = <2>;
+
+				bt_ep: endpoint {
+					remote-endpoint = <&usb2_ep>;
+				};
+			};
+		};
+	};
 };
 
 &adsp {
@@ -659,6 +701,22 @@ &pcie {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pcie_pins>;
 	status = "okay";
+
+	pcie@0 {
+		compatible = "pciclass,0604";
+		reg = <0 0 0 0 0>;
+		device_type = "pci";
+		num-lanes = <1>;
+		#address-cells = <3>;
+		#size-cells = <2>;
+		ranges;
+
+		port {
+			pcie_ep: endpoint {
+				remote-endpoint = <&wifi_ep>;
+			};
+		};
+	};
 };
 
 &pciephy {
@@ -1002,6 +1060,13 @@ pins-bus {
 		};
 	};
 
+	m2_e_key_kill_pins: m2-e-key-kill-pins {
+		pins-kill {
+			pinmux = <PINMUX_GPIO13__FUNC_B_GPIO13>,
+				 <PINMUX_GPIO14__FUNC_B_GPIO14>;
+		};
+	};
+
 	mipi_disp_avdd_en: mipi-disp-avdd-en-pins {
 		pins-en-ppvar-mipi-disp {
 			pinmux = <PINMUX_GPIO3__FUNC_B_GPIO3>;
@@ -1174,6 +1239,13 @@ pins-bus {
 		};
 	};
 
+	wlan_pmu_en: wlan-pmu-en-pins {
+		pins-wlan-pmu-en {
+			pinmux = <PINMUX_GPIO145__FUNC_B_GPIO145>;
+			output-low;
+		};
+	};
+
 	wlan_en: wlan-en-pins {
 		pins-en-pp3300-wlan {
 			pinmux = <PINMUX_GPIO12__FUNC_B_GPIO12>;
@@ -1417,10 +1489,22 @@ vdosys1_ep_ext: endpoint@1 {
 };
 
 &xhci2 {
-	/* no power supply since MT7921's power is controlled by PCIe */
 	/* MT7921's USB BT has issues with USB2 LPM */
 	usb2-lpm-disable;
 	status = "okay";
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@1 {
+			reg = <1>;
+
+			usb2_ep: endpoint {
+				remote-endpoint = <&bt_ep>;
+			};
+		};
+	};
 };
 
 #include <arm/cros-ec-keyboard.dtsi>
-- 
2.55.0.795.g602f6c329a-goog

Re: [PATCH v4 03/14] power: sequencing: Add pwrseq_power_is_on()

[Andy Shevchenko]

On Thu, Jul 09, 2026 at 05:57:08PM +0800, Chen-Yu Tsai wrote:
> The power sequencing consumer API already does power on state tracking
> internally. Expose the state to consumers through pwrseq_power_is_on()
> so that they don't have to reimplement it locally.

...

> Side question: I wonder if making the !POWER_SEQUENCING return success
> would make developers' lives better? At least that is what the clk and

"the clk... mistakenly do."

> regulator consumer APIs do.

When the clock is optional, that is justified, but for non-optional cases it
makes life actually harder (see for IS_ERR_OR_NULL() checks against
devm_clk_*() cases, which Krzysztof targets this cycle to eliminate).

That said, if the pwrseq desc can be NULL and the API tolerates that,
then it might make sense, otherwise it has to return an error.

-- 
With Best Regards,
Andy Shevchenko

Re: [PATCH v4 06/14] usb: core: Move struct usb_port and related APIs to port.h

[Andy Shevchenko]

On Thu, Jul 09, 2026 at 05:57:11PM +0800, Chen-Yu Tsai wrote:
> |struct usb_port| and its matching container_of() macro should live in
> its own port.h, matching the split we have for .c files.
> 
> Move them as described. Also move usb_port_is_power_on(), since in the
> next change its |struct usb_hub *| parameter will be changed to
> |struct usb_port *|, and becomes a non-static function that only
> references |struct usb_port|.
> 
> port.h is only included from hub.h, as a subsequent patch will directly
> use fields from |struct usb_port| in a static inline helper in hub.h.
> The USB internal headers don't have header guards to help with this.

Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

...

> +extern int usb_port_is_power_on(struct usb_hub *hub, unsigned int portstatus);

Drop 'extern', it's not needed in a modern code (like 20 years?).

-- 
With Best Regards,
Andy Shevchenko

Re: [PATCH v4 07/14] usb: hub: Pass |struct usb_port*| to usb_port_is_power_on()

[Andy Shevchenko]

On Thu, Jul 09, 2026 at 05:57:12PM +0800, Chen-Yu Tsai wrote:
> usb_port_is_power_on() currently takes |struct usb_hub*|, but only needs
> it to tell if the hub/port is SuperSpeed or not.
> 
> In a subsequent change, usb_port_is_power_on() needs access to a pwrseq
> state tracking field in |struct usb_port|. Either structure can be used
> to identify whether a port/hub is SuperSpeed or not, as the field in
> |struct usb_port| is inherited from the hub:
> 
>     port->is_superspeed = hub_is_superspeed(hub)
> 
> Replace usb_port_is_power_on()'s |struct usb_hub*| parameter with
> |struct usb_port*| so a subsequent change can use it.

Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

-- 
With Best Regards,
Andy Shevchenko

Re: [PATCH v4 08/14] usb: hub: Use usb_hub_set_port_power() to control port power everywhere

[Andy Shevchenko]

On Thu, Jul 09, 2026 at 05:57:13PM +0800, Chen-Yu Tsai wrote:
> There are still some instances in the USB hub driver where port power is
> directly controlled by toggling the USB_PORT_FEAT_POWER feature flag.
> 
> Switch these instances over to usb_hub_set_port_power() so that only one
> unified function to do this exists. This makes adding external power
> control with the power sequencing API easier and consistently applied.

Makes sense even on its own.

Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

-- 
With Best Regards,
Andy Shevchenko

Re: [PATCH v4 09/14] usb: hub: Power on connected M.2 E-key connectors with power sequencing API

[Andy Shevchenko]

On Thu, Jul 09, 2026 at 05:57:14PM +0800, Chen-Yu Tsai wrote:
> The new M.2 E-key connector can have a USB connection. For the USB device
> on this connector to work, its power must be enabled and the W_DISABLE2#
> signal deasserted. The connector driver handles this and provides a
> toggle over the power sequencing API.
> 
> This feature currently only supports a directly connected (no mux in
> between) M.2 E-key connector. Existing USB connector types are not
> covered. The USB A connector was recently added to the onboard devices
> driver. USB B connectors have historically been managed by the USB
> gadget or dual-role device controller drivers. USB C connectors are
> handled by TCPM drivers.
> 
> The power sequencing API does not know whether a power sequence provider
> is not needed or not available yet, so we only request it for connectors
> that we know need it, which at this time is just the E-key connector.
> 
> On the USB side, the port firmware node (if present) is tied to the
> usb_port device. This device is used to acquire the power sequencing
> descriptor. This allows the provider to tell the different ports on one
> hub apart.
> 
> This feature is not implemented in the onboard USB devices driver. The
> power sequencing API expects the consumer device to make the request,
> but there is no device node to instantiate a platform device to tie
> the driver to. The connector is not a child node of the USB host or
> hub, and the graph connection is from a USB port to the connector.
> And the connector itself already has a driver.
> 
> Power sequencing is not directly enabled in the connector driver as
> that would completely decouple the timing of it from the USB subsystem.
> It would not be possible for the USB subsystem to toggle the power
> for a power cycle or to disable the port.
> 
> Also rewrite the existing set_bit() and clear_bit() branches with
> assign_bit() to make it cleaner.

...

>  int usb_hub_set_port_power(struct usb_device *hdev, struct usb_hub *hub,
>  			   int port1, bool set)
>  {
> +	struct usb_port *pwrseq_port = hub->ports[port1 - 1];
>  	int ret;
>  
> +	ret = usb_hub_set_port_pwrseq(pwrseq_port, set);
> +	if (ret)
> +		return ret;
> +
>  	if (set)
>  		ret = set_port_feature(hdev, port1, USB_PORT_FEAT_POWER);
>  	else
>  		ret = usb_clear_port_feature(hdev, port1, USB_PORT_FEAT_POWER);
>  
> -	if (ret)
> +	if (ret) {
> +		usb_hub_set_port_pwrseq(pwrseq_port, !set);
>  		return ret;
> +	}

> -	if (set)
> -		set_bit(port1, hub->power_bits);
> -	else
> -		clear_bit(port1, hub->power_bits);
> +	assign_bit(port1, hub->power_bits, set);

I just realised that this change doesn't affect any functionality neither
before nor after the core of this patch. With that being said, I think you
may split this small piece to a separate patch to avoid unneeded churn here.
I will give a tag to that patch immediately I see it.

>  	return 0;
>  }

...

> -	return ret;
> +	/* stub functions return error */
> +	if (!IS_ENABLED(CONFIG_POWER_SEQUENCING))
> +		return ret;
> +
> +	if (!port->pwrseq)
> +		return ret;
> +
> +	return ret && pwrseq_power_is_on(port->pwrseq);

Perhaps

	/* stub functions return error */
	if (IS_ENABLED(CONFIG_POWER_SEQUENCING) && port->pwrseq)
		return ret && pwrseq_power_is_on(port->pwrseq);
	return ret;

? This will also make better visibility of what you meant in the comment
above.

>  }

...

> +static bool port_pwrseq_is_supported(struct usb_port *port_dev)
> +{
> +	struct device *dev = &port_dev->dev;
> +	struct fwnode_handle *port = dev->fwnode;

Use dev_fwnode().

Also it make sense to add a blank line here to keep __free()-defined variables
coupled with the checks (and hence scope).

> +	struct fwnode_handle *ep __free(fwnode_handle) =
> +			fwnode_graph_get_next_port_endpoint(port, NULL);
> +	if (!ep)
> +		return false;
> +
> +	struct fwnode_handle *remote __free(fwnode_handle) =
> +			fwnode_graph_get_remote_port_parent(ep);
> +	if (!remote)
> +		return false;
> +
> +	if (!fwnode_device_is_compatible(remote, "pcie-m2-e-connector")) {
> +		dev_dbg(dev, "remote endpoint %pfw is not a supported connector", remote);
> +		return false;
> +	}
> +
> +	return true;
> +}

-- 
With Best Regards,
Andy Shevchenko

Re: [PATCH v4 11/14] power: sequencing: pcie-m2: support matching on remote "port" node

[Andy Shevchenko]

On Thu, Jul 09, 2026 at 05:57:16PM +0800, Chen-Yu Tsai wrote:
> A USB hub can have multiple ports, and this driver needs to
> differentiate which port is being matched to. The USB hub driver now
> associates the "port" node with the usb_port device, so here we can
> use the remote "port" node to check for a match. Then fall back to
> the remote device node for the other connection types.
> 
> Also rewrite the existing "remote == dev_of_node(dev)" with
> device_match_of_node() for consistency.

...

> +		/* USB port devices are tied to the port nodes. */
> +		struct device_node *remote_port __free(device_node) =
> +				of_graph_get_remote_port(endpoint);

> +

No blank line here as this one is coupled with the check.

> +		if (device_match_of_node(dev, remote_port))
> +			return PWRSEQ_MATCH_OK;
> +
> +		/* Try the remote port parent for other types. */
>  		struct device_node *remote __free(device_node) =
>  				of_graph_get_remote_port_parent(endpoint);
> -		if (remote && (remote == dev_of_node(dev)))

> +

Ditto.

> +		if (device_match_of_node(dev, remote))
>  			return PWRSEQ_MATCH_OK;
>  	}

-- 
With Best Regards,
Andy Shevchenko

Re: [PATCH v4 06/14] usb: core: Move struct usb_port and related APIs to port.h

[Bartosz Golaszewski]

On Thu, 9 Jul 2026 11:57:11 +0200, Chen-Yu Tsai <wenst@chromium.org> said:
> |struct usb_port| and its matching container_of() macro should live in
> its own port.h, matching the split we have for .c files.
>
> Move them as described. Also move usb_port_is_power_on(), since in the
> next change its |struct usb_hub *| parameter will be changed to
> |struct usb_port *|, and becomes a non-static function that only
> references |struct usb_port|.
>
> port.h is only included from hub.h, as a subsequent patch will directly
> use fields from |struct usb_port| in a static inline helper in hub.h.
> The USB internal headers don't have header guards to help with this.
>
> Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
> Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
> ---

Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>

Re: [PATCH v4 10/14] dt-bindings: usb: mediatek,mtk-xhci: Switch to ports for USB connections

[Bartosz Golaszewski]

On Thu, 9 Jul 2026 11:57:15 +0200, Chen-Yu Tsai <wenst@chromium.org> said:
> This reverts commit 454a1e3cd36c113341d7b71e8e691c6e47ab4a8a.
>
> MediaTek's XHCI implementation supports both USB 2.0 High Speed (HS)
> and USB 3.x Super Speed (SS). The block can also be synthesized with
> either HS-only capability or HS+SS capability. The SSUSB controller
> handles the device or gadget mode. Saying that SSUSB handles the HS
> portion is wrong.
>
> For example, on the MT8195, the first two instances support both HS and
> SS, while the latter two instances support only HS.
>
> Switch to a "ports" sub-node for describing USB connections. Port 1 is
> Super Speed if the controller is SS-capable, otherwise it is High Speed.
> Port 2 is High Speed if SS-capable. This port mapping scheme directly
> matches what the hardware returns in its capability registers.
>
> Fixes: 454a1e3cd36c ("dt-bindings: usb: mediatek,mtk-xhci: Add port for SuperSpeed EP")
> Cc: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
> Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
> ---

Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>

Re: [PATCH v4 05/14] usb: hub: Associate port@ fwnode with USB port device

[Greg Kroah-Hartman]

On Thu, Jul 09, 2026 at 05:57:10PM +0800, Chen-Yu Tsai wrote:
> When a USB hub port is connected to a connector in a firmware node
> graph, the port itself has a node in the graph.
> 
> Associate the port's firmware node with the USB port's device,
> usb_port::dev. This is used in later changes for the M.2 slot power
> sequencing provider to match against the requesting port.
> 
> To avoid potential conflicts with ACPI firmware nodes and then causing
> power management issues, only assign the firmware node if the hub's
> firmware node is not an ACPI firmware node.
> 
> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
> Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
> Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
> ---
> Changes since v3:
> - Added missing fwnode_handle_put()
> 
> Changes since v2:
> - Skip assignment if hub firmware node is ACPI node
> ---
>  drivers/usb/core/port.c | 14 ++++++++++++++
>  1 file changed, 14 insertions(+)
> 
> diff --git a/drivers/usb/core/port.c b/drivers/usb/core/port.c
> index b1364f0c384c..e8fb2acd77be 100644
> --- a/drivers/usb/core/port.c
> +++ b/drivers/usb/core/port.c
> @@ -7,6 +7,7 @@
>   * Author: Lan Tianyu <tianyu.lan@intel.com>
>   */
>  
> +#include <linux/acpi.h>
>  #include <linux/kstrtox.h>
>  #include <linux/slab.h>
>  #include <linux/string_choices.h>
> @@ -358,6 +359,11 @@ static void usb_port_device_release(struct device *dev)
>  {
>  	struct usb_port *port_dev = to_usb_port(dev);
>  
> +	/*
> +	 * At this point ACPI nodes and swnodes have been removed by
> +	 * device_platform_notify_remove() in device_del().
> +	 */
> +	fwnode_handle_put(dev_fwnode(dev));
>  	kfree(port_dev->req);
>  	kfree(port_dev);
>  }
> @@ -780,6 +786,13 @@ int usb_hub_create_port_device(struct usb_hub *hub, int port1)
>  	port_dev->dev.driver = &usb_port_driver;
>  	dev_set_name(&port_dev->dev, "%s-port%d", dev_name(&hub->hdev->dev),
>  			port1);
> +	/*
> +	 * ACPI FW nodes are associated later when device_register() happens.
> +	 * Skip assigning one here to avoid potential conflicts.
> +	 */
> +	if (!is_acpi_node(dev_fwnode(&hdev->dev)))
> +		device_set_node(&port_dev->dev,
> +				fwnode_graph_get_port_by_id(dev_fwnode(&hdev->dev), port1));
>  	mutex_init(&port_dev->status_lock);
>  	retval = device_register(&port_dev->dev);
>  	if (retval) {
> @@ -852,6 +865,7 @@ int usb_hub_create_port_device(struct usb_hub *hub, int port1)
>  
>  void usb_hub_remove_port_device(struct usb_hub *hub, int port1)
>  {
> +	struct usb_device *hdev = hub->hdev;
>  	struct usb_port *port_dev = hub->ports[port1 - 1];
>  	struct usb_port *peer;

Is this last variable addition not needed here?  It's not used.

thanks,

greg k-h