Re: [PATCH 02/18] ASoC: dt-bindings: mediatek,mt8365-mt6357: Add audio sound card document

[Alexandre Mergnat <amergnat@baylibre.com>]

On 26/02/2024 16:30, AngeloGioacchino Del Regno wrote:
> Il 26/02/24 15:01, Alexandre Mergnat ha scritto:
>> Add soundcard bindings for the MT8365 SoC with the MT6357 audio codec.
>>
>> Signed-off-by: Alexandre Mergnat <amergnat@baylibre.com>
>> ---
>>   .../bindings/sound/mediatek,mt8365-mt6357.yaml     | 127 
>> +++++++++++++++++++++
>>   1 file changed, 127 insertions(+)
>>
>> diff --git 
>> a/Documentation/devicetree/bindings/sound/mediatek,mt8365-mt6357.yaml 
>> b/Documentation/devicetree/bindings/sound/mediatek,mt8365-mt6357.yaml
>> new file mode 100644
>> index 000000000000..f469611ec6b6
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/sound/mediatek,mt8365-mt6357.yaml
>> @@ -0,0 +1,127 @@
>> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
>> +%YAML 1.2
>> +---
>> +$id: http://devicetree.org/schemas/sound/mediatek,mt8365-mt6357.yaml#
>> +$schema: http://devicetree.org/meta-schemas/core.yaml#
>> +
>> +title: Mediatek MT8365 sound card with MT6357 sound codec.
>> +
>> +maintainers:
>> +  - Alexandre Mergnat <amergnat@baylibre.com>
>> +
>> +description:
>> +  This binding describes the MT8365 sound card.
>> +
>> +properties:
>> +  compatible:
>> +    const: mediatek,mt8365-mt6357
>> +
>> +  mediatek,hp-pull-down:
>> +    description:
>> +      Earphone driver positive output stage short to the
>> +      audio reference ground.
>> +      Default value is false.
>> +    type: boolean
>> +
>> +  mediatek,micbias0-microvolt:
>> +    description: |
> 
> description: Selects MIC Bias 0 output voltage
> 
>> +      Selects MIC Bias 0 output voltage.
>> +      [1.7v, 1.8v, 1.9v, 2.0v, 2.1v, 2.5v, 2.6v, 2.7v]
>> +    enum: [0, 1, 2, 3, 4, 5, 6, 7]
> 
> No, you don't say 0 1 2 3 4 to a property that says "microvolt", that's 
> simply
> wrong.
> 
> mediatek,micbias0-microvolt = <2100000>;
> 
> ...so you want a binding that says
> enum: [ 1700000, 1800000, this, that, 2700000]
> 

Is it correct if I put "description: Selects MIC Bias 0 output voltage 
index" ?

>> +
>> +  mediatek,micbias1-microvolt:
>> +    description: |
>> +      Selects MIC Bias 1 output voltage.
>> +      [1.7v, 1.8v, 1.9v, 2.0v, 2.1v, 2.5v, 2.6v, 2.7v]
>> +    enum: [0, 1, 2, 3, 4, 5, 6, 7]
> 
> same here.
> 
>> +
>> +  mediatek,platform:
>> +    $ref: /schemas/types.yaml#/definitions/phandle
>> +    description: The phandle of MT8365 ASoC platform.
>> +
>> +  pinctrl-names:
>> +    minItems: 1
>> +    items:
>> +      - const: aud_default
>> +      - const: aud_dmic
>> +      - const: aud_miso_off
>> +      - const: aud_miso_on
>> +      - const: aud_mosi_off
>> +      - const: aud_mosi_on
>> +
>> +  vaud28-supply:
>> +    description:
>> +      2.8 volt supply for the audio codec
>> +
>> +patternProperties:
>> +  "^dai-link-[0-9]+$":
>> +    type: object
>> +    description:
>> +      Container for dai-link level properties and CODEC sub-nodes.
>> +
>> +    properties:
>> +      codec:
>> +        type: object
>> +        description: Holds subnode which indicates codec dai.
>> +
>> +        properties:
>> +          sound-dai:
>> +            maxItems: 1
>> +            description: phandle of the codec DAI
>> +
>> +        additionalProperties: false
>> +
>> +      link-name:
>> +        description:
>> +          This property corresponds to the name of the BE dai-link to 
>> which
>> +          we are going to update parameters in this node.
>> +        items:
>> +          const: 2ND I2S BE
>> +
>> +      sound-dai:
>> +        maxItems: 1
>> +        description: phandle of the CPU DAI
>> +
>> +    additionalProperties: false
>> +
>> +    required:
>> +      - link-name
>> +      - sound-dai
>> +
>> +additionalProperties: false
>> +
>> +required:
>> +  - compatible
>> +  - mediatek,platform
>> +  - pinctrl-names
>> +  - vaud28-supply
>> +
>> +examples:
>> +  - |
>> +    sound {
>> +        compatible = "mediatek,mt8365-mt6357";
>> +        mediatek,platform = <&afe>;
> 
> Please:
> 
> https://docs.kernel.org/devicetree/bindings/dts-coding-style.html

Is it about the wrong pinctrl-names tab alignment ?
Also, 2ND I2S BE => 2ND_I2S_BE ?
Otherwise, I don't get it sorry.

> 
> Regards,
> Angelo
> 
>> +        pinctrl-names = "aud_default",
>> +            "aud_dmic",
>> +            "aud_miso_off",
>> +            "aud_miso_on",
>> +            "aud_mosi_off",
>> +            "aud_mosi_on";
>> +        pinctrl-0 = <&aud_default_pins>;
>> +        pinctrl-1 = <&aud_dmic_pins>;
>> +        pinctrl-2 = <&aud_miso_off_pins>;
>> +        pinctrl-3 = <&aud_miso_on_pins>;
>> +        pinctrl-4 = <&aud_mosi_off_pins>;
>> +        pinctrl-5 = <&aud_mosi_on_pins>;
>> +        vaud28-supply = <&mt6357_vaud28_reg>;
>> +
>> +        /* hdmi interface */
>> +        dai-link-0 {
>> +            sound-dai = <&afe>;
>> +            link-name = "2ND I2S BE";
>> +
>> +            codec {
>> +                sound-dai = <&it66121hdmitx>;
>> +            };
>> +        };
>> +    };
>>
> 

-- 
Regards,
Alexandre