From: "Kevin D. Kissell" <kevink@mips.com>
To: "Steven J. Hill" <sjhill@realitydiluted.com>
Cc: "Eric Christopher" <echristo@redhat.com>,
"Mark and Janice Juszczec" <juszczec@hotmail.com>,
<linux-mips@linux-mips.org>
Subject: Re: r3000 instruction set
Date: Mon, 23 Feb 2004 08:03:36 +0100 [thread overview]
Message-ID: <001301c3f9db$2c46d720$10eca8c0@grendel> (raw)
In-Reply-To: 40396D75.7090405@realitydiluted.com
> > The 3912 has no FPU, but if you're running on any contemporary
> > MIPS/Linux kernel and library system, you neither need nor want
> > soft-float. The kernel does FP instruction emulation. Running soft-float
> > would make for faster, if larger, code, but requires that the whole
> > system, particularly glibc, be built for soft-float, which is rarely done
> > (and the last time I tried it, didin't quite work with the standard
> > glibc sources out-of-the-box).
> >
> Correct. I use the FP emulator in Linux for my TX3917/PR31700 stuff. I
> have had no problems. Current glibc has assembly code that assumes hardware
> floating point which is why building for soft-float does not work out of
> the box. There are probably some patches out there to rectify that.
It's been several years, but the last time I dealt with it, it wasn't all
that hard to fix if you knew what you were doing, but it was a couple
of days' work just the same.
> Also, I have some documents for the 3912 on my FTP site:
>
> ftp://ftp.realitydiluted.com/docs/Toshiba
> ftp://ftp.realitydiluted.com/docs/Philips
>
> It should be noted that the Toshiba TX3912 and the Philips PR31700 are
> identical cores. There was definitely some cross-licensing going on there.
> Perhaps Kevin or Dominic would know this in more detail, but it is not
> really that important.
I'm not sure whether any NDAs which may or may not exist
would have expired by now, so I'll stick to a "no comment". ;o)
WARNING: multiple messages have this Message-ID (diff)
From: "Kevin D. Kissell" <kevink@mips.com>
To: "Steven J. Hill" <sjhill@realitydiluted.com>
Cc: Eric Christopher <echristo@redhat.com>,
Mark and Janice Juszczec <juszczec@hotmail.com>,
linux-mips@linux-mips.org
Subject: Re: r3000 instruction set
Date: Mon, 23 Feb 2004 08:03:36 +0100 [thread overview]
Message-ID: <001301c3f9db$2c46d720$10eca8c0@grendel> (raw)
Message-ID: <20040223070336.gAZQ5IhGTSW8a-VH7Wnu4lPYgeBC2YAlG4yZnPTiymk@z> (raw)
In-Reply-To: 40396D75.7090405@realitydiluted.com
> > The 3912 has no FPU, but if you're running on any contemporary
> > MIPS/Linux kernel and library system, you neither need nor want
> > soft-float. The kernel does FP instruction emulation. Running soft-float
> > would make for faster, if larger, code, but requires that the whole
> > system, particularly glibc, be built for soft-float, which is rarely done
> > (and the last time I tried it, didin't quite work with the standard
> > glibc sources out-of-the-box).
> >
> Correct. I use the FP emulator in Linux for my TX3917/PR31700 stuff. I
> have had no problems. Current glibc has assembly code that assumes hardware
> floating point which is why building for soft-float does not work out of
> the box. There are probably some patches out there to rectify that.
It's been several years, but the last time I dealt with it, it wasn't all
that hard to fix if you knew what you were doing, but it was a couple
of days' work just the same.
> Also, I have some documents for the 3912 on my FTP site:
>
> ftp://ftp.realitydiluted.com/docs/Toshiba
> ftp://ftp.realitydiluted.com/docs/Philips
>
> It should be noted that the Toshiba TX3912 and the Philips PR31700 are
> identical cores. There was definitely some cross-licensing going on there.
> Perhaps Kevin or Dominic would know this in more detail, but it is not
> really that important.
I'm not sure whether any NDAs which may or may not exist
would have expired by now, so I'll stick to a "no comment". ;o)
next prev parent reply other threads:[~2004-02-23 7:02 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
2004-02-22 3:02 r3000 instruction set Mark and Janice Juszczec
2004-02-22 3:15 ` Michael Uhler
2004-02-22 9:32 ` Kevin D. Kissell
2004-02-22 9:32 ` Kevin D. Kissell
2004-02-22 12:31 ` Dominic Sweetman
2004-02-22 19:13 ` Eric Christopher
2004-02-22 21:52 ` Kevin D. Kissell
2004-02-22 21:52 ` Kevin D. Kissell
2004-02-23 3:03 ` Steven J. Hill
2004-02-23 7:03 ` Kevin D. Kissell [this message]
2004-02-23 7:03 ` Kevin D. Kissell
2004-02-23 3:37 ` Eric Christopher
2004-02-23 7:11 ` Kevin D. Kissell
2004-02-23 7:11 ` Kevin D. Kissell
2004-02-23 7:29 ` Eric Christopher
-- strict thread matches above, loose matches on Subject: below --
2004-02-23 16:56 Mark and Janice Juszczec
2004-02-23 17:07 ` Michael Uhler
2004-02-23 17:13 ` Maciej W. Rozycki
2004-02-23 17:21 ` Kevin D. Kissell
2004-02-23 17:21 ` Kevin D. Kissell
2004-02-23 17:59 ` Dominic Sweetman
2004-02-23 20:48 Mark and Janice Juszczec
2004-02-23 22:46 ` Kevin D. Kissell
2004-02-23 22:46 ` Kevin D. Kissell
2004-03-01 15:38 Mark and Janice Juszczec
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='001301c3f9db$2c46d720$10eca8c0@grendel' \
--to=kevink@mips.com \
--cc=echristo@redhat.com \
--cc=juszczec@hotmail.com \
--cc=linux-mips@linux-mips.org \
--cc=sjhill@realitydiluted.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox