From: "Kevin D. Kissell" <kevink@mips.com>
To: "Mark and Janice Juszczec" <juszczec@hotmail.com>,
<linux-mips@linux-mips.org>
Cc: <uhler@mips.com>, <dom@mips.com>, <echristo@redhat.com>
Subject: Re: r3000 instruction set
Date: Mon, 23 Feb 2004 18:21:19 +0100 [thread overview]
Message-ID: <006001c3fa31$74c07fa0$10eca8c0@grendel> (raw)
In-Reply-To: Law10-F123ODt9Cz93M0000b89a@hotmail.com
> Someone suggested posting the message I get. Here it is:
>
> >./kaffe-bin FirstClass
> [kaffe-bin:6] Illgal instruction 674696a at 2abb034, ra=2adbffd0,
> P0_STATUS=0000500
> pid 6: killed (signal 4)
> >Reading command line: Try again
> Kernel panic: Attmpted to kill int!
Let me guess. You are running little-endian. The instruction word
in memory would be 0x6a697406. Do you think it's a coincidence
that 0x6a6974 spells "jit" in ASCII? ;o)
The reported address range looks like that where kaffe builds its
JITted instruciton buffers in MIPS/Linux. And, like I say, JIT is
somewhat broken for MIPS in Kaffe. Which version of the kaffe sources
are you building, and have you tried configuring with --with-engine=intrp
as I suggested?
Regards,
Kevin K.
WARNING: multiple messages have this Message-ID (diff)
From: "Kevin D. Kissell" <kevink@mips.com>
To: Mark and Janice Juszczec <juszczec@hotmail.com>,
linux-mips@linux-mips.org
Cc: uhler@mips.com, dom@mips.com, echristo@redhat.com
Subject: Re: r3000 instruction set
Date: Mon, 23 Feb 2004 18:21:19 +0100 [thread overview]
Message-ID: <006001c3fa31$74c07fa0$10eca8c0@grendel> (raw)
Message-ID: <20040223172119.9eyiXwzPEiCxpg08kIt7y1tpGACb8pc4084E_acpXxI@z> (raw)
In-Reply-To: Law10-F123ODt9Cz93M0000b89a@hotmail.com
> Someone suggested posting the message I get. Here it is:
>
> >./kaffe-bin FirstClass
> [kaffe-bin:6] Illgal instruction 674696a at 2abb034, ra=2adbffd0,
> P0_STATUS=0000500
> pid 6: killed (signal 4)
> >Reading command line: Try again
> Kernel panic: Attmpted to kill int!
Let me guess. You are running little-endian. The instruction word
in memory would be 0x6a697406. Do you think it's a coincidence
that 0x6a6974 spells "jit" in ASCII? ;o)
The reported address range looks like that where kaffe builds its
JITted instruciton buffers in MIPS/Linux. And, like I say, JIT is
somewhat broken for MIPS in Kaffe. Which version of the kaffe sources
are you building, and have you tried configuring with --with-engine=intrp
as I suggested?
Regards,
Kevin K.
next prev parent reply other threads:[~2004-02-23 17:20 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
2004-02-23 16:56 r3000 instruction set Mark and Janice Juszczec
2004-02-23 17:07 ` Michael Uhler
2004-02-23 17:13 ` Maciej W. Rozycki
2004-02-23 17:21 ` Kevin D. Kissell [this message]
2004-02-23 17:21 ` Kevin D. Kissell
2004-02-23 17:59 ` Dominic Sweetman
-- strict thread matches above, loose matches on Subject: below --
2004-03-01 15:38 Mark and Janice Juszczec
2004-02-23 20:48 Mark and Janice Juszczec
2004-02-23 22:46 ` Kevin D. Kissell
2004-02-23 22:46 ` Kevin D. Kissell
2004-02-22 3:02 Mark and Janice Juszczec
2004-02-22 3:15 ` Michael Uhler
2004-02-22 9:32 ` Kevin D. Kissell
2004-02-22 9:32 ` Kevin D. Kissell
2004-02-22 12:31 ` Dominic Sweetman
2004-02-22 19:13 ` Eric Christopher
2004-02-22 21:52 ` Kevin D. Kissell
2004-02-22 21:52 ` Kevin D. Kissell
2004-02-23 3:03 ` Steven J. Hill
2004-02-23 7:03 ` Kevin D. Kissell
2004-02-23 7:03 ` Kevin D. Kissell
2004-02-23 3:37 ` Eric Christopher
2004-02-23 7:11 ` Kevin D. Kissell
2004-02-23 7:11 ` Kevin D. Kissell
2004-02-23 7:29 ` Eric Christopher
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='006001c3fa31$74c07fa0$10eca8c0@grendel' \
--to=kevink@mips.com \
--cc=dom@mips.com \
--cc=echristo@redhat.com \
--cc=juszczec@hotmail.com \
--cc=linux-mips@linux-mips.org \
--cc=uhler@mips.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox