From: "Bradley D. LaRonde" <brad@ltc.com>
To: "Jun Sun" <jsun@mvista.com>, <linux-mips@oss.sgi.com>
Subject: Re: busybox does not like 2.4.8, or the other way around?
Date: Thu, 20 Sep 2001 22:02:58 -0400 [thread overview]
Message-ID: <048f01c14241$89c103c0$3501010a@ltc.com> (raw)
In-Reply-To: 3BAA962D.C55F2239@mvista.com
I'm using busybox 0.60.1 with the latest oss kernel with success. No clue
on why your busybox is stuck though.
Regards,
Brad
----- Original Message -----
From: "Jun Sun" <jsun@mvista.com>
To: <linux-mips@oss.sgi.com>
Sent: Thursday, September 20, 2001 9:21 PM
Subject: busybox does not like 2.4.8, or the other way around?
>
> I have a small busybox userland that works fine with 2.4.2 kernel, but
failed
> with the latest 2.4.8 kernel. The symptom is that it is stuck at the
> following prompt:
>
> ================
> ....
> Kernel command line: console=ttyS0,115200 ip=bootp
> ....
> Freeing unused kernel memory: 4k freed
> Algorithmics/MIPS FPU Emulator v1.4
> serial console detected. Disabling virtual terminals.
> init started: BusyBox v0.51 (2001.07.18-06:43+0000) multi-call binary
>
> Please press Enter to activate this console.
> ================
>
> A simple test shows the console is still working, i.e., pressing a key
*does*
> generate an interrupt and ISR *does* read the correct char value.
>
> I really cannot think of anything else that might make busybox stuck here.
> Any clue? Anybody else is using busybox with more recent kernels?
>
> Jun
>
WARNING: multiple messages have this Message-ID (diff)
From: "Bradley D. LaRonde" <brad@ltc.com>
To: Jun Sun <jsun@mvista.com>, linux-mips@oss.sgi.com
Subject: Re: busybox does not like 2.4.8, or the other way around?
Date: Thu, 20 Sep 2001 22:02:58 -0400 [thread overview]
Message-ID: <048f01c14241$89c103c0$3501010a@ltc.com> (raw)
Message-ID: <20010921020258.zLL8av9riuAE8CUlxthrKQ8ptyfW4Bm8AxWQp4owFAo@z> (raw)
In-Reply-To: 3BAA962D.C55F2239@mvista.com
I'm using busybox 0.60.1 with the latest oss kernel with success. No clue
on why your busybox is stuck though.
Regards,
Brad
----- Original Message -----
From: "Jun Sun" <jsun@mvista.com>
To: <linux-mips@oss.sgi.com>
Sent: Thursday, September 20, 2001 9:21 PM
Subject: busybox does not like 2.4.8, or the other way around?
>
> I have a small busybox userland that works fine with 2.4.2 kernel, but
failed
> with the latest 2.4.8 kernel. The symptom is that it is stuck at the
> following prompt:
>
> ================
> ....
> Kernel command line: console=ttyS0,115200 ip=bootp
> ....
> Freeing unused kernel memory: 4k freed
> Algorithmics/MIPS FPU Emulator v1.4
> serial console detected. Disabling virtual terminals.
> init started: BusyBox v0.51 (2001.07.18-06:43+0000) multi-call binary
>
> Please press Enter to activate this console.
> ================
>
> A simple test shows the console is still working, i.e., pressing a key
*does*
> generate an interrupt and ISR *does* read the correct char value.
>
> I really cannot think of anything else that might make busybox stuck here.
> Any clue? Anybody else is using busybox with more recent kernels?
>
> Jun
>
next prev parent reply other threads:[~2001-09-21 2:02 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2001-09-21 1:21 busybox does not like 2.4.8, or the other way around? Jun Sun
2001-09-21 2:02 ` Bradley D. LaRonde [this message]
2001-09-21 2:02 ` Bradley D. LaRonde
2001-09-21 3:56 ` Ralf Baechle
2001-09-21 5:30 ` Karsten Merker
-- strict thread matches above, loose matches on Subject: below --
2001-09-26 15:53 Marc Karasek
2001-09-26 16:47 ` Karsten Merker
2001-09-26 17:26 ` Jun Sun
2001-09-26 21:56 ` Geoffrey Espin
2001-09-27 17:21 ` Jun Sun
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='048f01c14241$89c103c0$3501010a@ltc.com' \
--to=brad@ltc.com \
--cc=jsun@mvista.com \
--cc=linux-mips@oss.sgi.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox