From: "Kevin D. Kissell" <kevink@mips.com>
To: "Mark and Janice Juszczec" <juszczec@hotmail.com>,
<linux-mips@linux-mips.org>
Subject: Re: hardware questions
Date: Mon, 29 Dec 2003 12:39:02 +0100 [thread overview]
Message-ID: <056401c3ce00$5cd8a690$10eca8c0@grendel> (raw)
In-Reply-To: Law10-F61XsDQ1sMzqi00015abf@hotmail.com
As Geert pointed out, the big-endian SGI hardware configuration
and the little-endian PDA configuration mean that you'll be cross-compiling
for "mipsel" (MIPS endian-little) on the Indigo anyway. SGI did
use industry-standard monitors, keyboards, and disks units of the
period (which was 10 years ago - they could be hard to find today),
but used non-standard NIC and memory cards. You're probably better
off using a Linux PC as your development host.
----- Original Message -----
From: "Mark and Janice Juszczec" <juszczec@hotmail.com>
To: <linux-mips@linux-mips.org>
Sent: Sunday, December 21, 2003 17:20
Subject: hardware questions
>
> Hi folks
>
> I'm the guy with the Helio pda running an r3912 chip. In an effort to
> create a better development environment, I'm thinking about puchasing a
> Silicon Graphics Iris Indigo Workstation.
>
> But, I'm unfamiliar with MIPS hardware.
>
> First of all, will code developed on this machine run on the r3912 chip?
> The r3912 is little endian mips, 16 bit I think but maybe 32 bit.
>
> Can off the shelf monitors, keyboards, hard drives, NICs and memory be
> installed in this system?
>
> Mark
>
> _________________________________________________________________
> Grab our best dial-up Internet access offer: 6 months @$9.95/month.
> http://join.msn.com/?page=dept/dialup
>
>
>
WARNING: multiple messages have this Message-ID (diff)
From: "Kevin D. Kissell" <kevink@mips.com>
To: Mark and Janice Juszczec <juszczec@hotmail.com>,
linux-mips@linux-mips.org
Subject: Re: hardware questions
Date: Mon, 29 Dec 2003 12:39:02 +0100 [thread overview]
Message-ID: <056401c3ce00$5cd8a690$10eca8c0@grendel> (raw)
Message-ID: <20031229113902.Wa3aa_I_z5y19kFW4JhT24rErmzNsXzvgB4ybBdT-vU@z> (raw)
In-Reply-To: Law10-F61XsDQ1sMzqi00015abf@hotmail.com
As Geert pointed out, the big-endian SGI hardware configuration
and the little-endian PDA configuration mean that you'll be cross-compiling
for "mipsel" (MIPS endian-little) on the Indigo anyway. SGI did
use industry-standard monitors, keyboards, and disks units of the
period (which was 10 years ago - they could be hard to find today),
but used non-standard NIC and memory cards. You're probably better
off using a Linux PC as your development host.
----- Original Message -----
From: "Mark and Janice Juszczec" <juszczec@hotmail.com>
To: <linux-mips@linux-mips.org>
Sent: Sunday, December 21, 2003 17:20
Subject: hardware questions
>
> Hi folks
>
> I'm the guy with the Helio pda running an r3912 chip. In an effort to
> create a better development environment, I'm thinking about puchasing a
> Silicon Graphics Iris Indigo Workstation.
>
> But, I'm unfamiliar with MIPS hardware.
>
> First of all, will code developed on this machine run on the r3912 chip?
> The r3912 is little endian mips, 16 bit I think but maybe 32 bit.
>
> Can off the shelf monitors, keyboards, hard drives, NICs and memory be
> installed in this system?
>
> Mark
>
> _________________________________________________________________
> Grab our best dial-up Internet access offer: 6 months @$9.95/month.
> http://join.msn.com/?page=dept/dialup
>
>
>
next prev parent reply other threads:[~2003-12-29 11:38 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2003-12-21 16:20 hardware questions Mark and Janice Juszczec
2003-12-21 17:26 ` Geert Uytterhoeven
2003-12-29 11:39 ` Kevin D. Kissell [this message]
2003-12-29 11:39 ` Kevin D. Kissell
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='056401c3ce00$5cd8a690$10eca8c0@grendel' \
--to=kevink@mips.com \
--cc=juszczec@hotmail.com \
--cc=linux-mips@linux-mips.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox