* hardware questions
@ 2003-12-21 16:20 Mark and Janice Juszczec
2003-12-21 17:26 ` Geert Uytterhoeven
2003-12-29 11:39 ` Kevin D. Kissell
0 siblings, 2 replies; 4+ messages in thread
From: Mark and Janice Juszczec @ 2003-12-21 16:20 UTC (permalink / raw)
To: linux-mips
Hi folks
I'm the guy with the Helio pda running an r3912 chip. In an effort to
create a better development environment, I'm thinking about puchasing a
Silicon Graphics Iris Indigo Workstation.
But, I'm unfamiliar with MIPS hardware.
First of all, will code developed on this machine run on the r3912 chip?
The r3912 is little endian mips, 16 bit I think but maybe 32 bit.
Can off the shelf monitors, keyboards, hard drives, NICs and memory be
installed in this system?
Mark
_________________________________________________________________
Grab our best dial-up Internet access offer: 6 months @$9.95/month.
http://join.msn.com/?page=dept/dialup
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: hardware questions
2003-12-21 16:20 hardware questions Mark and Janice Juszczec
@ 2003-12-21 17:26 ` Geert Uytterhoeven
2003-12-29 11:39 ` Kevin D. Kissell
1 sibling, 0 replies; 4+ messages in thread
From: Geert Uytterhoeven @ 2003-12-21 17:26 UTC (permalink / raw)
To: Mark and Janice Juszczec; +Cc: Linux/MIPS Development
On Sun, 21 Dec 2003, Mark and Janice Juszczec wrote:
> I'm the guy with the Helio pda running an r3912 chip. In an effort to
> create a better development environment, I'm thinking about puchasing a
> Silicon Graphics Iris Indigo Workstation.
>
> But, I'm unfamiliar with MIPS hardware.
>
> First of all, will code developed on this machine run on the r3912 chip?
> The r3912 is little endian mips, 16 bit I think but maybe 32 bit.
SGI workstations are big endian, while WinCE hardware is always little endian.
So you still have to cross-compile if you want to use the SGI as a development
environment.
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: hardware questions
2003-12-21 16:20 hardware questions Mark and Janice Juszczec
2003-12-21 17:26 ` Geert Uytterhoeven
@ 2003-12-29 11:39 ` Kevin D. Kissell
2003-12-29 11:39 ` Kevin D. Kissell
1 sibling, 1 reply; 4+ messages in thread
From: Kevin D. Kissell @ 2003-12-29 11:39 UTC (permalink / raw)
To: Mark and Janice Juszczec, linux-mips
As Geert pointed out, the big-endian SGI hardware configuration
and the little-endian PDA configuration mean that you'll be cross-compiling
for "mipsel" (MIPS endian-little) on the Indigo anyway. SGI did
use industry-standard monitors, keyboards, and disks units of the
period (which was 10 years ago - they could be hard to find today),
but used non-standard NIC and memory cards. You're probably better
off using a Linux PC as your development host.
----- Original Message -----
From: "Mark and Janice Juszczec" <juszczec@hotmail.com>
To: <linux-mips@linux-mips.org>
Sent: Sunday, December 21, 2003 17:20
Subject: hardware questions
>
> Hi folks
>
> I'm the guy with the Helio pda running an r3912 chip. In an effort to
> create a better development environment, I'm thinking about puchasing a
> Silicon Graphics Iris Indigo Workstation.
>
> But, I'm unfamiliar with MIPS hardware.
>
> First of all, will code developed on this machine run on the r3912 chip?
> The r3912 is little endian mips, 16 bit I think but maybe 32 bit.
>
> Can off the shelf monitors, keyboards, hard drives, NICs and memory be
> installed in this system?
>
> Mark
>
> _________________________________________________________________
> Grab our best dial-up Internet access offer: 6 months @$9.95/month.
> http://join.msn.com/?page=dept/dialup
>
>
>
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: hardware questions
2003-12-29 11:39 ` Kevin D. Kissell
@ 2003-12-29 11:39 ` Kevin D. Kissell
0 siblings, 0 replies; 4+ messages in thread
From: Kevin D. Kissell @ 2003-12-29 11:39 UTC (permalink / raw)
To: Mark and Janice Juszczec, linux-mips
As Geert pointed out, the big-endian SGI hardware configuration
and the little-endian PDA configuration mean that you'll be cross-compiling
for "mipsel" (MIPS endian-little) on the Indigo anyway. SGI did
use industry-standard monitors, keyboards, and disks units of the
period (which was 10 years ago - they could be hard to find today),
but used non-standard NIC and memory cards. You're probably better
off using a Linux PC as your development host.
----- Original Message -----
From: "Mark and Janice Juszczec" <juszczec@hotmail.com>
To: <linux-mips@linux-mips.org>
Sent: Sunday, December 21, 2003 17:20
Subject: hardware questions
>
> Hi folks
>
> I'm the guy with the Helio pda running an r3912 chip. In an effort to
> create a better development environment, I'm thinking about puchasing a
> Silicon Graphics Iris Indigo Workstation.
>
> But, I'm unfamiliar with MIPS hardware.
>
> First of all, will code developed on this machine run on the r3912 chip?
> The r3912 is little endian mips, 16 bit I think but maybe 32 bit.
>
> Can off the shelf monitors, keyboards, hard drives, NICs and memory be
> installed in this system?
>
> Mark
>
> _________________________________________________________________
> Grab our best dial-up Internet access offer: 6 months @$9.95/month.
> http://join.msn.com/?page=dept/dialup
>
>
>
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2003-12-29 11:39 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2003-12-21 16:20 hardware questions Mark and Janice Juszczec
2003-12-21 17:26 ` Geert Uytterhoeven
2003-12-29 11:39 ` Kevin D. Kissell
2003-12-29 11:39 ` Kevin D. Kissell
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox